Internet-Draft IPv6 NRP Option July 2024
Dong, et al. Expires 9 January 2025 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-6man-enhanced-vpn-vtn-id-07
Published:
Intended Status:
Standards Track
Expires:
Authors:
J. Dong
Huawei Technologies
Z. Li
Huawei Technologies
C. Xie
China Telecom
C. Ma
China Telecom
G. Mishra
Verizon Inc.

Carrying Network Resource Partition (NRP) Information in IPv6 Extension Header

Abstract

Virtual Private Networks (VPNs) provide different customers with logically separated connectivity over a common network infrastructure. With the introduction and evolvement of 5G and also in some existing network scenarios, some customers may require network connectivity services with advanced features comparing to conventional VPN services. Such kind of network service is called enhanced VPNs. Enhanced VPNs can be used, for example, to deliver network slice services.

A Network Resource Partition (NRP) is a subset of the network resources and associated policies on each of a connected set of links in the underlay network. An NRP could be used as the underlay to support one or a group of enhanced VPN services. For packet forwarding in a specific NRP, some fields in the data packet are used to identify the NRP the packet belongs to, so that NRP-specific processing can be performed on each node along a path in the NRP.

This document specifies a new IPv6 Hop-by-Hop option to carry the NRP related information in data packets, which could be used to identify the NRP-specific processing to be performed on the packets by each network node along a network path in the NRP.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 9 January 2025.

Table of Contents

1. Introduction

Virtual Private Networks (VPNs) [RFC4026] provide different customers with logically isolated connectivity over a common network infrastructure. With the introduction and evolvement of 5G and also in some existing network scenarios, some customers may require network connectivity services with advanced features comparing to conventional VPNs, such as resource isolation from other services or guaranteed performance. Such kind of network service is called enhanced VPN [I-D.ietf-teas-enhanced-vpn]. Enhanced VPN service requires the coordination and integration between the overlay VPNs and the capability and resources of the underlay network. Enhanced VPN can be used, for example, to deliver network slice services as described in [RFC9543].

[RFC9543] also introduces the concept of the Network Resource Partition (NRP), which is a subset of the buffer/queuing/scheduling resources and associated policies on each of a connected set of links in the underlay network. An NRP can be associated with a logical network topology to select or specify the set of links and nodes involved.

[I-D.ietf-teas-enhanced-vpn] specifies the framework of NRP-based enhanced VPN and describes the candidate component technologies in different network planes and network layers. An NRP could be used as the underlay to meet the requirement of one or a group of enhanced VPN services.

In packet forwarding, traffic of different Enhanced VPN services needs to be processed separately based on the network resources and the logical topology associated with the corresponding NRP. [I-D.ietf-teas-nrp-scalability] describes the scalability considerations and the possible optimizations for providing a relatively large number of NRPs. One approach to improve the data plane scalability of NRP is to introduce a dedicated NRP ID in the data packet to identify the set of network resources allocated to an NRP, so that packets in an NRP can be processed and forwarded using the NRP-specific network resources, which could avoid possible resource competition with services in other NRPs. An NRP ID can have network resource semantics, which represents a subset of the resources (e.g. bandwidth, buffer and queuing resources) allocated on a given set of links and nodes which constitute a logical network topology. The logical topology of an NRP could be defined and identified using mechanisms such as Multi-Topology [RFC4915], [RFC5120] or Flex-Algo [RFC9350].

This document specifies a mechanism to carry NRP related information in a new IPv6 Hop-by-Hop option (Section 4.3 of [RFC8200]) called "NRP option". The NRP option is parsed by every intermediate node along the forwarding path, and the obtained NRP ID is used to invoke NRP-specific packet processing and forwarding using the set of NRP-specific resources. This provides a scalable solution to support a relatively large number of NRPs in an IPv6 network [I-D.ietf-teas-nrp-scalability].

Although in this document the application of the NRP option is to indicate the NRP-specific resource information, the NRP option is considered as a generic mechanism to convey network wide NRP ID and information with different semantics to meet the possible use cases in the future. Some considerations about generalization are described in Section 5.

1.1. Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2. New IPv6 Extension Header Option for NRP

A new Hop-by-Hop option (Section 4.3 of [RFC8200]) type "NRP" is defined to carry the NRP related information. Its format is shown in Figure 1.

      0                   1                   2                   3
      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
                                     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                                     |  Option Type  |  Opt Data Len |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |     Flags     | Context Type  |            Reserved           |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     ~                      Data Plane NRP ID                        ~
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

                 Figure 1. The format of NRP Option

Option Type: 8-bit identifier of the type of option. The type of NRP option is to be assigned by IANA. The bits of the type field are defined as below:

Opt Data Len: 8-bit unsigned integer indicates the length of the option Data field of this option, in octets.

Flags: 8-bit flags field. The most significant bit is defined in this document.

           0 1 2 3 4 5 6 7
          +-+-+-+-+-+-+-+-+
          |S|U U U U U U U|
          +-+-+-+-+-+-+-+-+

The setting of the S flag depends on the operator's policy. Such policy can be NRP-specific, and may be at a fine granularity to apply to a subset of packets within an NRP. Such policy needs to be provided to the ingress nodes to apply to packets which are mapped to corresponding NRPs. For a given NRP, the suggested default policy is to make the S flag set.

As an example, for OAM packets which are used to detect the availability of a forwarding path associated with NRP-specific resources, the S flag SHOULD be set to 1. This way, only when the set of network resources and policy are correctly instantiated for the NRP on all network links along the path, the OAM packets can be received by the egress endpoint and the availability check can be passed.

The S flag in the NRP option provides an approach for flexible and fine-granular control of the forwarding policy of packets whose NRP ID do not match with the NRPs provisioned on the transit network nodes. One alternate approach is to specify the forwarding policy of packets in different NRPs via configuration, while additional configuration would be needed when non-default fine-granular policy is required for a given NRP.

Context Type (CT): One-octet field used to indicate the semantics of the NRP ID carried in the option. The context value defined in this document is as follows:

Reserved: 2-octet field reserved for future use. They MUST be set to 0 on transmission and MUST be ignored on receipt.

Data Plane NRP ID: The identifier of an NRP carried in data packets, the semantics of the ID is determined by the Context Type. The length of the NRP-ID is the Opt Data Length minus 4.

Note that, in the context of 5G network slicing, if a deployment found it useful, a four-octet NRP ID field may be derived from the four-octet Single Network Slice Selection Assistance Information (S-NSSAI) defined in 3GPP [TS23501].

3. Procedures

This section describes the procedures for NRP option processing when the Context Type in the NRP option is set to 0. The processing procedures for NRP option with other Context Types are out of the scope of this document and will be specified in separate documents which introduce those Context Types.

3.1. Adding NRP Option to Packets

When an ingress node of an IPv6 domain receives a packet, according to the traffic classification and mapping policy, the packet needs to be steered into one of the NRPs in the network, then the packet MUST be encapsulated in an outer IPv6 header with the source and destination addresses set according to the policy, and the NRP ID of the NRP which the packet is mapped to according to the policy MUST be carried in the NRP option of the Hop-by-Hop Options header, which is associated with the outer IPv6 header.

3.2. NRP-specific Packet Forwarding

On receipt of a packet with the NRP option, each network node which can process the Hop-by-Hop Options header and the NRP option in fast path [I-D.ietf-6man-hbh-processing] MUST use the NRP ID to determine the set of local network resources which are allocated to the NRP. The packet forwarding behavior is based on both the destination IP address and the NRP ID. More specifically, the destination IP address SHOULD be used to determine the next-hop and the outgoing interface, and NRP ID SHOULD be used to determine the set of network resources on the outgoing interface which are allocated to the NRP for processing and sending the packet. If the NRP ID does not match with any of the NRP ID provisioned on the outgoing interface, the S flag in the NRP option SHOULD be used to determine whether the packet should be dropped or forwarded using the default set of network resources of the outgoing interface. The Traffic Class field of the outer IPv6 header MAY be used to provide differentiated treatment for packets which belong to the same NRP. The egress node of the IPv6 domain MUST decapsulate the outer IPv6 header and the Hop-by-Hop Options header which includes the NRP option.

In the forwarding plane, there can be different approaches of partitioning the local network resources and allocating them to different NRPs. For example, on one physical interface, a subset of the forwarding plane resources (e.g. bandwidth and the associated buffer and queuing resources) can be allocated to a particular NRP and represented as a virtual sub-interface or a data channel with reserved bandwidth resource. In packet forwarding, the IPv6 destination address of the received packet is used to identify the next-hop and the outgoing layer-3 interface, and the NRP ID is used to further identify the virtual sub-interface or the data channel on the outgoing interface which is associated with the NRP.

Network nodes which do not support the processing of Hop-by-Hop Options header SHOULD ignore the Hop-by-Hop options header and forward the packet only based on the destination IP address. Network nodes which support Hop-by-Hop Options header, but do not support the NRP option SHOULD ignore the NRP option and forward the packet only based on the destination IP address. The network node MAY process the rest of the Hop-by-Hop options in the Hop-by-Hop Options header.

4. Operational Considerations

As described in [RFC8200], network nodes may be configured to ignore the Hop-by-Hop Options header, drop packets containing a Hop-by-Hop Options header, or assign packets containing a Hop-by-Hop Options header to a slow processing path. In networks with such network nodes, it is important that packets of an NRP are not dropped due to the existence of the Hop-by-Hop Options header. Operators need to make sure that all the network nodes involved in an NRP can either process the Hop-by-Hop Options header in the fast path, or ignore the Hop-by-Hop Options header. Since an NRP is associated with a logical network topology, one practical approach is to ensure that all the network nodes involved in that logical topology support the processing of the Hop-by-Hop Options header and the NRP option in the fast path, and constrain the packet forwarding path to the logical topology of the NRP.

[I-D.ietf-6man-hbh-processing] specifies the modified procedures for the processing of IPv6 Hop-by-Hop Options header, with the purpose of making the Hop-by-Hop Options header useful. Network nodes complying with [I-D.ietf-6man-hbh-processing] will not drop packets with Hop-by-Hop Options header and the NRP option.

5. Considerations about Generalization

During the discussion of this document in the 6MAN WG, one of the suggestions received is to make the NRP option more generic in terms of semantics and encoding. This section gives some analysis about to what extent the semantics of NRP could be generalized, and how the generalization could be achieved with the proposed encoding.

Based on the NRP definition in [RFC9543], the concept of NRP could be extended as: an underlay network construct which is associated with a set of network-wide attributes and states maintained on each participating network node. The attributes associated with an NRP may include but not limited to: network resource attributes, network topology attributes, and network function attributes etc.

This shows the semantics of NRP can be quite generic. Although generalization is something good to have, it would be important to understand and identify the boundary of generalization. In this document, It is anticipated that for one network attribute to be included in NRP, it needs to be a network-wide attribute rather than a node-specific attribute. Thus whether a network-wide view can be provided or not could be considered as one prerequisite of making one attribute part of the NRP option.

The format of the NRP option contains the Flags field, the Context Type field and the Reserved field, which provide the capability for future extensions. That said, since the NRP option needs to be processed by network nodes in the fast path, the capability of network devices need to be considered when new semantics and encoding are introduced.

6. IANA Considerations

This document requests IANA to assign a new option type from "Destination Options and Hop-by-Hop Options" registry [IANA-HBH].

   Hex Value      Binary Value      Description      Reference
                  act chg rest
   -----------------------------------------------------------
      TBA         00   0  tba       NRP Option      [this document]

This document requests IANA to create a new registry for the "NRP Option Context Type" under the "Internet Protocol Version 6 (IPv6) Parameters" registry. The allocation policy of this registry is "Standards Action". The initial code points are assigned by this document as follows:

   Value          Description       Reference
   -----------------------------------------------
     0            Resource ID      [this document]
   1-254          Unassigned
    255           Reserved         [this document]

7. Security Considerations

The security considerations with IPv6 Hop-by-Hop Options header are described in [RFC8200], [RFC7045], [RFC9098] [RFC9099] and [I-D.ietf-6man-hbh-processing]. This document introduces a new IPv6 Hop-by-Hop option which is either processed in the fast path or ignored by network nodes, thus it does not introduce additional security issues.

8. Contributors

   Zhibo Hu
   Email: huzhibo@huawei.com

   Lei Bao
   Email: baolei7@huawei.com

9. Acknowledgements

The authors would like to thank Juhua Xu, James Guichard, Joel Halpern, Tom Petch, Aijun Wang, Zhenqiang Li, Tom Herbert, Adrian Farrel, Eric Vyncke, Erik Kline, Mohamed Boucadair and Ketan Talaulikar for their review and valuable comments.

10. References

10.1. Normative References

[I-D.ietf-teas-enhanced-vpn]
Dong, J., Bryant, S., Li, Z., Miyasaka, T., and Y. Lee, "A Framework for Network Resource Partition (NRP) based Enhanced Virtual Private Networks", Work in Progress, Internet-Draft, draft-ietf-teas-enhanced-vpn-20, , <https://datatracker.ietf.org/doc/html/draft-ietf-teas-enhanced-vpn-20>.
[IANA-HBH]
"IANA, "Destination Options and Hop-by-Hop Options"", , <https://www.iana.org/assignments/ipv6-parameters/>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8200]
Deering, S. and R. Hinden, "Internet Protocol, Version 6 (IPv6) Specification", STD 86, RFC 8200, DOI 10.17487/RFC8200, , <https://www.rfc-editor.org/info/rfc8200>.
[RFC9543]
Farrel, A., Ed., Drake, J., Ed., Rokui, R., Homma, S., Makhijani, K., Contreras, L., and J. Tantsura, "A Framework for Network Slices in Networks Built from IETF Technologies", RFC 9543, DOI 10.17487/RFC9543, , <https://www.rfc-editor.org/info/rfc9543>.

10.2. Informative References

[I-D.ietf-6man-hbh-processing]
Hinden, R. M. and G. Fairhurst, "IPv6 Hop-by-Hop Options Processing Procedures", Work in Progress, Internet-Draft, draft-ietf-6man-hbh-processing-20, , <https://datatracker.ietf.org/doc/html/draft-ietf-6man-hbh-processing-20>.
[I-D.ietf-teas-nrp-scalability]
Dong, J., Li, Z., Gong, L., Yang, G., and G. S. Mishra, "Scalability Considerations for Network Resource Partition", Work in Progress, Internet-Draft, draft-ietf-teas-nrp-scalability-04, , <https://datatracker.ietf.org/doc/html/draft-ietf-teas-nrp-scalability-04>.
[RFC4026]
Andersson, L. and T. Madsen, "Provider Provisioned Virtual Private Network (VPN) Terminology", RFC 4026, DOI 10.17487/RFC4026, , <https://www.rfc-editor.org/info/rfc4026>.
[RFC4915]
Psenak, P., Mirtorabi, S., Roy, A., Nguyen, L., and P. Pillay-Esnault, "Multi-Topology (MT) Routing in OSPF", RFC 4915, DOI 10.17487/RFC4915, , <https://www.rfc-editor.org/info/rfc4915>.
[RFC5120]
Przygienda, T., Shen, N., and N. Sheth, "M-ISIS: Multi Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)", RFC 5120, DOI 10.17487/RFC5120, , <https://www.rfc-editor.org/info/rfc5120>.
[RFC7045]
Carpenter, B. and S. Jiang, "Transmission and Processing of IPv6 Extension Headers", RFC 7045, DOI 10.17487/RFC7045, , <https://www.rfc-editor.org/info/rfc7045>.
[RFC9098]
Gont, F., Hilliard, N., Doering, G., Kumari, W., Huston, G., and W. Liu, "Operational Implications of IPv6 Packets with Extension Headers", RFC 9098, DOI 10.17487/RFC9098, , <https://www.rfc-editor.org/info/rfc9098>.
[RFC9099]
Vyncke, É., Chittimaneni, K., Kaeo, M., and E. Rey, "Operational Security Considerations for IPv6 Networks", RFC 9099, DOI 10.17487/RFC9099, , <https://www.rfc-editor.org/info/rfc9099>.
[RFC9350]
Psenak, P., Ed., Hegde, S., Filsfils, C., Talaulikar, K., and A. Gulko, "IGP Flexible Algorithm", RFC 9350, DOI 10.17487/RFC9350, , <https://www.rfc-editor.org/info/rfc9350>.
[TS23501]
"3GPP TS23.501", , <https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=3144>.

Authors' Addresses

Jie Dong
Huawei Technologies
Huawei Campus, No. 156 Beiqing Road
Beijing
100095
China
Zhenbin Li
Huawei Technologies
Huawei Campus, No. 156 Beiqing Road
Beijing
100095
China
Chongfeng Xie
China Telecom
China Telecom Beijing Information Science & Technology, Beiqijia
Beijing
102209
China
Chenhao Ma
China Telecom
China Telecom Beijing Information Science & Technology, Beiqijia
Beijing
102209
China
Gyan Mishra
Verizon Inc.