| Internet-Draft | SNAC Router RA Flag | July 2024 |
| Hui | Expires 3 January 2025 | [Page] |
This document defines a new flag, the SNAC Router flag, in the Router Advertisement message that can be used to distinguish configuration information sent by SNAC routers from information sent by infrastructure routers. This flag is used only by SNAC routers and is ignored by all other devices.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 3 January 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
A Stub Network Auto Configuration for IPv6 (SNAC) router is an autonomously-configuring router that provides IP connectivity between one or more stub networks and one or more infrastructure networks. A common SNAC router example is a device that attaches a 6LoWPAN-based network to a home network, automatically providing IPv6 forwarding between the two networks without explicit operator configuration. SNAC routers are described in [I-D.ietf-snac-simple]. This document defines a new RA flag, the "SNAC router" flag, which SNAC routers use to identify RAs sent by other SNAC routers.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The "SNAC Router" flag is router advertisement flag bit TBD.¶
The SNAC router flag is to be used by SNAC routers. The use of this flag is documented in [I-D.ietf-snac-simple]. Devices that do not implement [I-D.ietf-snac-simple] MUST NOT set the SNAC router flag, and MUST silently ignore the SNAC router flag. This means that the presence or absence of the flag should not change the behavior of such devices in any way (other than that it is of course permissible to log and cache the value of the flag as part of normal router advertisement processing, where applicable.¶
IANA is requested to allocate a flag from the "IPv6 ND Router Advertisement flags" registry of [RFC5175], as specified below:¶
| RA Option Bit | Description | Reference |
| TBD | S - SNAC Router Flag | This Document |
This protocol shares the security issues of NDP that are documented in the "Security Considerations" section of [RFC4861].¶