SuperSaver Version 2.0 for Windows 95/98
(c) Copyright 2001, John Wolff
http://www.woltec.com

CONTENTS
0.	What's New
I.	End User License Agreement
II.	System Requirements
III.   	Installing SuperSaver  on your Computer


0.	WHAT'S   NEW
---------------------------------------------------------------------------
New in Version 2.0 of SuperSaver:

Video Support
Add AVI and  MPEG video movies to your list of slides in your screensaver.
Moviola viewer 
View MPG and AVI files in slow motion, forward, backward, 1 frame at a time
Zoom in for closeups, Pause to view a frame at close range. 

I.	LICENSE AGREEMENT
---------------------------------------------------------------------------
SuperSaver  for Windows95/98
© Copyright 2001, John Wolff 
------------------------------------------
 LICENSE AGREEMENT

By running  SuperSaver Version 2.0 (THE SOFTWARE)  you are consenting to be bound by this agreement. If you do not agree to all of the terms of this agreement, you must stop using THE SOFTWARE and remove it from your computer.

The following terms apply to the use of  THE SOFTWARE :

The trial version of  THE SOFTWARE  may be used and distributed freely, as long as the program remains in its original state. You may use it for a nominal trial period of 30 days or 30 trials. Then, if you like it and still use it, you must pay a registration fee.

You will then receive a unique  registration key which will remove all limitations of the trial version.

If you have paid the  license fee, you are granted use of THE SOFTWARE  in the manner described under "Scope of License". 

 

 

SCOPE OF LICENSE

You may:

Use the licensed copy of THE SOFTWARE on any single computer

Use the licensed copy of  THE SOFTWARE on a network, provided that each person accessing the software through the network must have a copy licensed to that person.

Use THE SOFTWARE on a second computer as long as only one copy is used at a time.

You may not:

-Redistribute licensed copies of THE SOFTWARE 

-Permit other individuals to use the licensed copy of  THE SOFTWARE except under the terms listed above

-Modify, translate, reverse engineer, decompile,  disassemble, or create derivative works based on THE SOFTWARE 

DISCLAIMER  OF WARRANTEE

It is understood that THE SOFTWARE and any related documentation is provided "as is" without warranty  of any kind, either express or implied, including, without limitation, the implied warranties or merchantability, fitness for a particular purpose, or  noninfringement of intellectual property rights.  The entire risk arising out of use or performance of THE SOFTWARE remains with you, the user. Whether during the trial period, or after Registration, it is understood that  you  install and use this program and related files at your own risk.   This disclaimer of  warranty constitutes an essential part of the agreement.

DISCLAIMER  OF WARRANTEE

It is understood that THE SOFTWARE and any related documentation is provided "as is" without warranty  of any kind, either express or implied, including, without limitation, the implied warranties or merchantability, fitness for a particular purpose, or  noninfringement.  The entire risk arising out of use or performance of THE SOFTWARE remains with you, the user.  This disclaimer of  warranty constitutes an essential part of the agreement.

-------------------------------------------
In no event shall the author or anyone or any entity associated with the author be held liable for any damages whatsoever arising from, or due to the use or misuse of THE SOFTWARE,  (including, without limitation, damages for loss of business profit, business interruption, loss of business information, copyright or intellectual property rights infringement liability,  or any other pecuniary loss) arising out of the use or inability to use this product, even if the author has been advised of the possibility of such damages.  
There are no other warrantees made, either explicitly or implicitly.
-------------------------------------------
The license will terminate automatically if you fail to comply with the limitations described herein. On termination, you must destroy all copies of THE SOFTWARE.

---------------------------------------------
With respect to the use of this application for the display of  images using the GIF format, certain proprietary rights in LZW compression technology are held by others. The sourcecode in THE SOFTWARE does not include LZW compression or decompression source, and does not infringe any proprietary rights  in LZW compression technology held by others.




II  SYSTEM  REQUIREMENTS
Processor 
As a minimum, you'll need a fast processor, preferably a Pentium processor (90Mhz) with at least 16 Megabytes of RAM, to use SuperSaver  effectively. Although it will work on a slower system, like a 486, the performance is not as good. In general, the faster your processor is, and the more RAM you have, the better the performance will be.

Color System
Depending on the types of images you display in your screensaver, you should use the appropriate Color setting. 16 bit high Color (not to be confused with 16 colors, or 1 bit), or 24 bit true color are best, but a system using 256 colors will also give good results.

Platform
SuperSaver    runs equally well on Windows 98 or Windows 95. But it does not run on earlier versions of Windows. It should perform equally well on Windows 2000, but has not been tested on this system at this writing.


III.      Installing SuperSaver  on your Computer


SuperSaver  is designed for use on a computer running under Windows 98 or 95. Do not install SuperSaver   in Windows 3.1.  

Please ensure that you have the latest revision copy, for best results. New revisions are uploaded to the woltec homepage (http://www.woltec.com) as soon as they are completed. They can be identified by the Revision No. appearing in the "About" tab, just below the icon. It is the date code - ddmmyy. For example: Rev: 121101 is read as Nov. 12, 2001.

Before you can use SuperSaver   you have to run the setup program in Windows 95 or Windows 98 so it will work properly on your computer. You can install SuperSaver  as often as you like. Do it by using the setup program provided. The setup program unpacks the program files and copies them to your working directory. Screensaver files (*.scr) are usually located in the main Windows directory. That's where you'll find "Ssaver12.scr", which is what the executable file is named.

Here's how to install SuperSaver :
 	
    1.  Start Windows 95/98.

    2.  Locate the SuperSaver  installation files on your computer.
 	
	SuperSaver   comes packed in a zipped, compressed file called "ssuper12.zip" If you downloaded the file over the internet, look for it in the directory into which you downloaded it. If you received it via E-mail, look in the e-mail directory, or in the directory which you designated as the destination for e-mail attachments.
 
    3. Use a progran such as "PKUNZIP" to decompress the files to the installation directory.

    4. You can start the installation process by clicking on  "SETUP.EXE" in Windows Explorer, or you can follow steps 5 to 6,  below.
	    
    5. From the START menu, select RUN to open the File Run Dialog Box.

    6. Enter the Command Line in the dialog box that will run the SuperSaver  setup program. This is the full pathname of the SuperSaver setup program "SETUP.EXE". Use the "Browse" feature to locate this file.

     If you copied the setup program to floppy Drive "A", type:
	    A:\SETUP
     If your floppy disk goes in your Drive "B", type:
	    B:\SETUP

	Click the OK" command button.

     7. When the setup program loads, just follow the prompts. It will suggest "C:\Program Files\ssuper" as the default destination directory into which the progam will be installed. Choose a different directory if you wish. This directory is reserved for the Readme file, Install and Uninstall applications. The main file, ssuper12.scr will be installed in the Windows Directory.
	
     8. The SuperSaver Setup program will unpack the necessary files and place them into the selected directory. 

     9. The setup program will notify you when the installation is complete.

Setting up SuperSaver  as your default screensaver:

After completing the installation procedure described above, click on the "My Computer" icon on the desktop, then click "Control Panel", then click  "Display". Select the "Screen Saver" tab, and scroll down the list of available screensavers until you find "SuperSaver".  Select this as your default screensaver. You can also make changes to the settings at this time and preview the slides and music selections.

SuperSaver  was designed to run as a screensaver and also as a normal EXE program, so it could be used to show slides and play music when not being used as a screensaver. All the information you need to run it in the dual mode is to be found in the application once you have installed in on your computer.
				

