patch-1.3.5 linux/drivers/net/CONFIG
Next file: linux/drivers/net/Makefile
Previous file: linux/drivers/net/3c505.c
Back to the patch index
Back to the overall index
- Lines: 33
- Date:
Wed Jun 28 09:01:18 1995
- Orig file:
v1.3.4/linux/drivers/net/CONFIG
- Orig date:
Wed Jun 7 11:39:06 1995
diff -u --recursive --new-file v1.3.4/linux/drivers/net/CONFIG linux/drivers/net/CONFIG
@@ -48,15 +48,15 @@
# If you want at least one board to not autosense then
# no board can autosense. For a board mix of several
# types, OR the manual values [eg for a DE500 (100M) with
-# a DE450 (AUI) use '-DDE4X5_AUTOSENSE=(0x80|0x08)']
-# For full auto media/mode selection = 0x4000
-# For manual TP media selection = 0x01
-# For manual TP/Nway media selection (DC21041) = 0x02
-# For manual BNC media selection = 0x04
-# For manual AUI media selection = 0x08
-# For manual BNC/AUI media selection (DC21040) = 0x10
-# For manual 10Mb/s mode selection (DC21140) = 0x40
-# For manual 100Mb/s mode selection (DC21140) = 0x80
+# a DE450 (AUI) use '-DDE4X5_AUTOSENSE=(_100Mb|AUI)']
+# For full auto media/mode selection = AUTO
+# For manual TP media selection = TP
+# For manual TP/Nway media selection (DC21041) = TP_NW
+# For manual BNC media selection = BNC
+# For manual AUI media selection = AUI
+# For manual BNC/AUI media selection (DC21040) = BNC_AUI
+# For manual 10Mb/s mode selection (DC21140) = _10Mb
+# For manual 100Mb/s mode selection (DC21140) = _100Mb
# The DC21040 will default to TP if TP_NW is specified
# The DC21041 will default to BNC if BNC_AUI is specified
# The DC21140 needs it's speed to be manually set to
@@ -83,5 +83,6 @@
PLIP_OPTS =
DEPCA_OPTS = -DDEPCA_DEBUG=1
EWRK3_OPTS = -DEWRK3_DEBUG=1
-DE4X5_OPTS = -DDE4X5_DEBUG=1 -DDE4X5_AUTOSENSE=0x4000
+DE4X5_OPTS = -DDE4X5_DEBUG=1 -DDE4X5_AUTOSENSE=AUTO
ELP_OPTS = -DELP_DEBUG=1 -DELP_NEED_HARD_RESET=0
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov
with Sam's (original) version of this