patch-1.3.98 linux/drivers/net/Config.in

Next file: linux/drivers/net/new_tunnel.c
Previous file: linux/drivers/char/serial.c
Back to the patch index
Back to the overall index
Lines: 196
Date: Tue Apr 30 13:31:04 1996
Orig file: v1.3.97/linux/drivers/net/Config.in
Orig date: Sat Apr 27 15:19:53 1996

diff -u --recursive --new-file v1.3.97/linux/drivers/net/Config.in linux/drivers/net/Config.in
@@ -2,98 +2,114 @@
 # Network device configuration
 #
 tristate 'Dummy net driver support' CONFIG_DUMMY
-tristate 'SLIP (serial line) support' CONFIG_SLIP
-if [ "$CONFIG_SLIP" != "n" ]; then
-  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
-  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
+tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+  tristate 'Frame relay DLCI support (EXPERIMENTAL)' CONFIG_DLCI
+  if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then
+    int '  Max open DLCI' CONFIG_DLCI_COUNT 24
+    int '  Max DLCI per device' CONFIG_DLCI_MAX 8
+    dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
+  fi
 fi
+tristate 'PLIP (parallel port) support' CONFIG_PLIP
 tristate 'PPP (point-to-point) support' CONFIG_PPP
 if [ ! "$CONFIG_PPP" = "n" ]; then
   comment 'CCP compressors for PPP are only built as modules.'
 fi
-tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP
-tristate 'WIC (Radio IP bridge)' CONFIG_WIC
-tristate 'Z8530 SCC kiss emulation driver for AX.25' CONFIG_SCC
-tristate 'PLIP (parallel port) support' CONFIG_PLIP
-tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
-
-tristate 'DLCI (Frame relay) support' CONFIG_DLCI
-if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then
-  int '  Max open DLCI' CONFIG_DLCI_COUNT 24
-  int '  Max DLCI per device' CONFIG_DLCI_MAX 8
-  tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA
-fi
-
-bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA
-bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
-if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
-  tristate 'WD80*3 support' CONFIG_WD80x3
-  tristate 'SMC Ultra support' CONFIG_ULTRA
-  tristate 'SMC 9194 support' CONFIG_SMC9194
-fi
-bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
-if [ "$CONFIG_LANCE" = "y" ]; then
-  bool 'AMD PCInet32 (VLB and PCI) support' CONFIG_LANCE32
-fi  
-bool '3COM cards' CONFIG_NET_VENDOR_3COM
-if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
-  tristate '3c501 support' CONFIG_EL1
-  tristate '3c503 support' CONFIG_EL2
-  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-    tristate '3c505 support' CONFIG_ELPLUS
-    tristate '3c507 support' CONFIG_EL16
-  fi
-  tristate '3c509/3c579 support' CONFIG_EL3
-  tristate '3c590 series (592/595/597) "Vortex" support' CONFIG_VORTEX
+tristate 'SLIP (serial line) support' CONFIG_SLIP
+if [ "$CONFIG_SLIP" != "n" ]; then
+  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
 fi
-bool 'Other ISA cards' CONFIG_NET_ISA
-if [ "$CONFIG_NET_ISA" = "y" ]; then
-  tristate 'Cabletron E21xx support' CONFIG_E2100
-  tristate 'DEPCA support' CONFIG_DEPCA
-  tristate 'EtherWorks 3 support' CONFIG_EWRK3
-  tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
-  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-    bool 'SEEQ8005 support' CONFIG_SEEQ8005
-    tristate 'AT1700 support' CONFIG_AT1700
-    tristate 'FMV-181/182 support' CONFIG_FMV18X
-    tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
-    tristate 'NI5210 support' CONFIG_NI52
-    bool 'NI6510 support' CONFIG_NI65
-    tristate 'WaveLAN support' CONFIG_WAVELAN
-    tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
-  fi
-  tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
-  tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
-  tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
-  tristate 'NE2000/NE1000 support' CONFIG_NE2000
+bool 'Radio network interfaces' CONFIG_NET_RADIO
+if [ "$CONFIG_NET_RADIO" != "n" ]; then
   if [ "$CONFIG_AX25" = "y" ]; then
-    bool 'Ottawa PI and PI/2 support' CONFIG_PI
     bool 'Gracilis PackeTwin support' CONFIG_PT
+    bool 'Ottawa PI and PI/2 support' CONFIG_PI
+  fi
+  tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP
+  tristate 'WaveLAN support' CONFIG_WAVELAN
+  tristate 'WIC Radio IP bridge (EXPERIMENTAL)' CONFIG_WIC
+  if [ "$CONFIG_AX25" = "y" ]; then
+    tristate 'Z8530 SCC kiss emulation driver for AX.25' CONFIG_SCC
   fi
-  bool 'SK_G16 support' CONFIG_SK_G16
-fi
-bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
-if [ "$CONFIG_NET_EISA" = "y" ]; then
-  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-    tristate 'Ansel Communications EISA 3200 support' CONFIG_AC3200
-  fi
-  tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT
-  tristate 'DE425, DE434, DE435, DE500 support' CONFIG_DE4X5
-  tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP
-  tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
-# bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100
-# bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32
-  bool 'Zenith Z-Note support' CONFIG_ZNET
 fi
-bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
-if [ "$CONFIG_NET_POCKET" = "y" ]; then
-  bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
-  tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
-  tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
-# bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA
-# bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN
-# bool '3 Com 3c589 PCMCIA support' CONFIG_3C589
+#
+#	Ethernet
+#
+bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
+if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
+  bool '3COM cards' CONFIG_NET_VENDOR_3COM
+  if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
+    tristate '3c501 support' CONFIG_EL1
+    tristate '3c503 support' CONFIG_EL2
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate '3c505 support' CONFIG_ELPLUS
+      tristate '3c507 support' CONFIG_EL16
+    fi
+    tristate '3c509/3c579 support' CONFIG_EL3
+    tristate '3c590 series (592/595/597) "Vortex" support' CONFIG_VORTEX
+  fi
+  bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
+  if [ "$CONFIG_LANCE" = "y" ]; then
+    bool 'AMD PCInet32 (VLB and PCI) support' CONFIG_LANCE32
+  fi  
+  bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
+  if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
+    tristate 'WD80*3 support' CONFIG_WD80x3
+    tristate 'SMC Ultra support' CONFIG_ULTRA
+    tristate 'SMC 9194 support' CONFIG_SMC9194
+  fi
+  bool 'Other ISA cards' CONFIG_NET_ISA
+  if [ "$CONFIG_NET_ISA" = "y" ]; then
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'AT1700 support (EXPERIMENTAL)' CONFIG_AT1700
+    fi
+    tristate 'Cabletron E21xx support' CONFIG_E2100
+    tristate 'DEPCA support' CONFIG_DEPCA
+    tristate 'EtherWorks 3 support' CONFIG_EWRK3
+    tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
+      tristate 'FMV-181/182 support' CONFIG_FMV18X
+    fi
+    tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
+    tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
+    tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
+    fi
+    tristate 'NE2000/NE1000 support' CONFIG_NE2000
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'NI5210 support' CONFIG_NI52
+      bool 'NI6510 support' CONFIG_NI65
+    fi
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
+    fi
+    bool 'SK_G16 support' CONFIG_SK_G16
+  fi
+  bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
+  if [ "$CONFIG_NET_EISA" = "y" ]; then
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200
+    fi
+    tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT
+    tristate 'DE425, DE434, DE435, DE500 support' CONFIG_DE4X5
+    tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP
+    tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
+    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET
+    fi
+  fi
+  bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
+  if [ "$CONFIG_NET_POCKET" = "y" ]; then
+    bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
+    tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
+    tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
+  fi
 fi
+
 bool 'Token Ring driver support' CONFIG_TR
 if [ "$CONFIG_TR" = "y" ]; then
   tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this