patch-1.3.98 linux/include/linux/scsi.h
Next file: linux/include/linux/scsicam.h
Previous file: linux/include/linux/random.h
Back to the patch index
Back to the overall index
- Lines: 199
- Date:
Thu Jan 1 02:00:00 1970
- Orig file:
v1.3.97/linux/include/linux/scsi.h
- Orig date:
Sun Sep 10 09:37:21 1995
diff -u --recursive --new-file v1.3.97/linux/include/linux/scsi.h linux/include/linux/scsi.h
@@ -1,198 +0,0 @@
-#ifndef _LINUX_SCSI_H
-#define _LINUX_SCSI_H
-
-/*
- * This header file contains public constants and structures used by
- * the scsi code for linux.
- */
-
-/*
- $Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $
-
- For documentation on the OPCODES, MESSAGES, and SENSE values,
- please consult the SCSI standard.
-
-*/
-
-/*
- * SCSI opcodes
- */
-
-#define TEST_UNIT_READY 0x00
-#define REZERO_UNIT 0x01
-#define REQUEST_SENSE 0x03
-#define FORMAT_UNIT 0x04
-#define READ_BLOCK_LIMITS 0x05
-#define REASSIGN_BLOCKS 0x07
-#define READ_6 0x08
-#define WRITE_6 0x0a
-#define SEEK_6 0x0b
-#define READ_REVERSE 0x0f
-#define WRITE_FILEMARKS 0x10
-#define SPACE 0x11
-#define INQUIRY 0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT 0x15
-#define RESERVE 0x16
-#define RELEASE 0x17
-#define COPY 0x18
-#define ERASE 0x19
-#define MODE_SENSE 0x1a
-#define START_STOP 0x1b
-#define RECEIVE_DIAGNOSTIC 0x1c
-#define SEND_DIAGNOSTIC 0x1d
-#define ALLOW_MEDIUM_REMOVAL 0x1e
-
-#define SET_WINDOW 0x24
-#define READ_CAPACITY 0x25
-#define READ_10 0x28
-#define WRITE_10 0x2a
-#define SEEK_10 0x2b
-#define WRITE_VERIFY 0x2e
-#define VERIFY 0x2f
-#define SEARCH_HIGH 0x30
-#define SEARCH_EQUAL 0x31
-#define SEARCH_LOW 0x32
-#define SET_LIMITS 0x33
-#define PRE_FETCH 0x34
-#define READ_POSITION 0x34
-#define SYNCHRONIZE_CACHE 0x35
-#define LOCK_UNLOCK_CACHE 0x36
-#define READ_DEFECT_DATA 0x37
-#define MEDIUM_SCAN 0x38
-#define COMPARE 0x39
-#define COPY_VERIFY 0x3a
-#define WRITE_BUFFER 0x3b
-#define READ_BUFFER 0x3c
-#define UPDATE_BLOCK 0x3d
-#define READ_LONG 0x3e
-#define WRITE_LONG 0x3f
-#define CHANGE_DEFINITION 0x40
-#define WRITE_SAME 0x41
-#define LOG_SELECT 0x4c
-#define LOG_SENSE 0x4d
-#define MODE_SELECT_10 0x55
-#define MODE_SENSE_10 0x5a
-#define READ_12 0xa8
-#define WRITE_12 0xaa
-#define WRITE_VERIFY_12 0xae
-#define SEARCH_HIGH_12 0xb0
-#define SEARCH_EQUAL_12 0xb1
-#define SEARCH_LOW_12 0xb2
-#define SEND_VOLUME_TAG 0xb6
-#define WRITE_LONG_2 0xea
-
-/*
- * Status codes
- */
-
-#define GOOD 0x00
-#define CHECK_CONDITION 0x01
-#define CONDITION_GOOD 0x02
-#define BUSY 0x04
-#define INTERMEDIATE_GOOD 0x08
-#define INTERMEDIATE_C_GOOD 0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define QUEUE_FULL 0x1a
-
-#define STATUS_MASK 0x1e
-
-/*
- * SENSE KEYS
- */
-
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define BLANK_CHECK 0x08
-#define COPY_ABORTED 0x0a
-#define ABORTED_COMMAND 0x0b
-#define VOLUME_OVERFLOW 0x0d
-#define MISCOMPARE 0x0e
-
-
-/*
- * DEVICE TYPES
- */
-
-#define TYPE_DISK 0x00
-#define TYPE_TAPE 0x01
-#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
-#define TYPE_WORM 0x04 /* Treated as ROM by our system */
-#define TYPE_ROM 0x05
-#define TYPE_SCANNER 0x06
-#define TYPE_MOD 0x07 /* Magneto-optical disk -
- * - treated as TYPE_DISK */
-#define TYPE_NO_LUN 0x7f
-
-
-/*
- * MESSAGE CODES
- */
-
-#define COMMAND_COMPLETE 0x00
-#define EXTENDED_MESSAGE 0x01
-#define EXTENDED_MODIFY_DATA_POINTER 0x00
-#define EXTENDED_SDTR 0x01
-#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
-#define EXTENDED_WDTR 0x03
-#define SAVE_POINTERS 0x02
-#define RESTORE_POINTERS 0x03
-#define DISCONNECT 0x04
-#define INITIATOR_ERROR 0x05
-#define ABORT 0x06
-#define MESSAGE_REJECT 0x07
-#define NOP 0x08
-#define MSG_PARITY_ERROR 0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define BUS_DEVICE_RESET 0x0c
-
-#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
-#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
-
-#define SIMPLE_QUEUE_TAG 0x20
-#define HEAD_OF_QUEUE_TAG 0x21
-#define ORDERED_QUEUE_TAG 0x22
-
-/*
- * Here are some scsi specific ioctl commands which are sometimes useful.
- */
-/* These are a few other constants only used by scsi devices */
-
-#define SCSI_IOCTL_GET_IDLUN 0x5382
-
-/* Used to turn on and off tagged queuing for scsi devices */
-
-#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
-#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
-
-/* Used to obtain the host number of a device. */
-#define SCSI_IOCTL_PROBE_HOST 0x5385
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
-
-#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov
with Sam's (original) version of this