patch-2.0.36 linux/drivers/char/cyclades.c
Next file: linux/drivers/char/ftape/ecc.c
Previous file: linux/drivers/char/apm_bios.c
Back to the patch index
Back to the overall index
- Lines: 7134
- Date:
Sun Nov 15 10:32:53 1998
- Orig file:
v2.0.35/linux/drivers/char/cyclades.c
- Orig date:
Mon Oct 7 22:03:17 1996
diff -u --recursive --new-file v2.0.35/linux/drivers/char/cyclades.c linux/drivers/char/cyclades.c
@@ -1,13 +1,17 @@
+#define BLOCKMOVE
+#define Z_WAKE
static char rcsid[] =
-"$Revision: 1.36.3.9 $$Date: 1996/10/07 19:47:13 $";
+"$Revision: 2.1.1.10 $$Date: 1998/11/12 16:08:23 $";
+
/*
* linux/drivers/char/cyclades.c
*
* This file contains the driver for the Cyclades Cyclom-Y multiport
* serial boards.
*
- * Maintained by Marcio Saito (marcio@cyclades.com) and
- * Randolph Bentson (bentson@grieg.seaslug.org)
+ * Maintained by Ivan Passos (ivan@cyclades.com),
+ * Marcio Saito (marcio@cyclades.com) and
+ * Randolph Bentson (bentson@grieg.seaslug.org).
*
* For Technical support and installation problems, please send e-mail
* to support@cyclades.com.
@@ -22,11 +26,239 @@
* This module exports the following rs232 io functions:
* int cy_init(void);
* int cy_open(struct tty_struct *tty, struct file *filp);
+ * and the following functions for modularization.
+ * int init_module(void);
+ * void cleanup_module(void);
*
* $Log: cyclades.c,v $
- * Revision 1.36.3.9 1996/10/07 19:47:13 bentson
- * add MOD_DEC_USE_COUNT in one return from cy_close (as
- * noted by Jon Lewis <jlewis@INORGANIC5.FDT.NET>)
+ * Revision: 2.1.1.10 1998/11/12 16:08:23 ivan
+ * cy_close function now resets (correctly) the tty->closing flag;
+ * JIFFIES_DIFF macro fixed.
+ *
+ * Revision 2.1.1.9 1998/09/02 14:47:01 ivan
+ * Fixed bug in cy_close function, which was not informing HW of
+ * which port should have the reception disabled before doing so;
+ * fixed Cyclom-8YoP hardware detection bug.
+ *
+ * Revision 2.1.1.8 1998/08/20 17:04:54 ivan
+ * Fixed bug in cy_close function, which causes malfunction
+ * of one of the first 4 ports when a higher port is closed
+ * (Cyclom-Y only).
+ *
+ * Revision 2.1.1.7 1998/08/10 17:01:45 ivan
+ * Fixed Cyclom-4Yo hardware detection bug.
+ *
+ * Revision 2.1.1.6 1998/08/04 12:19:36 ivan
+ * cyy_interrupt changed once more to avoid occurence of kernel
+ * oopses during PPP operation.
+ *
+ * Revision 2.1.1.5 1998/08/03 16:55:59 ivan
+ * /proc/cyclades implementation (only for monolythic driver)
+ * with great collaboration of Marc Lewis <marc@blarg.net>;
+ * cyy_interrupt was changed to avoid occurence of kernel oopses
+ * during PPP operation.
+ *
+ * Revision 2.1.1.4 1998/06/01 18:01:19 ivan
+ * data loss prevention revisited (cy_wait_until_sent created);
+ * MOD_COUNT bug (which caused the usage decrementing not to work
+ * properly) fixed.
+ *
+ * Revision 2.1.1.3b 1998/05/14 10:14:00 ivan
+ * temporary workaround for losing SIGHUPs in PPP connections
+ * (Cyclom-Y only).
+ *
+ * Revision 2.1.1.3a 1998/03/16 18:01:12 ivan
+ * cleaned up the data loss fix;
+ * fixed XON/XOFF handling once more (Cyclades-Z);
+ * general revision in the driver routines;
+ * introduction of a mechanism to prevent data loss with slow
+ * printers, by forcing a delay before closing the port.
+ *
+ * Revision 2.1.1.2a 1998/02/17 16:50:00 ivan
+ * fixed detection/handling of new CD1400 in Ye boards;
+ * fixed XON/XOFF handling (Cyclades-Z);
+ * fixed data loss caused by a premature port close;
+ * introduction of a flag that holds the CD1400 version ID per port
+ * (used by the CYGETCD1400VER new ioctl).
+ *
+ * Revision 2.1.1.1a 1997/12/03 17:31:19 ivan
+ * Code review for the module cleanup routine;
+ * fixed RTS and DTR status report for new CD1400's in get_modem_info;
+ * includes anonymous changes regarding signal_pending.
+ *
+ * Revision 2.1 1997/11/01 17:42:41 ivan
+ * Changes in the driver to support Alpha systems (except 8Zo V_1);
+ * BREAK fix for the Cyclades-Z boards;
+ * driver inactivity control by FW implemented;
+ * introduction of flag that allows driver to take advantage of
+ * a special CD1400 feature related to HW flow control;
+ * added support for the CD1400 rev. J (Cyclom-Y boards);
+ * introduction of ioctls to:
+ * - control the rtsdtr_inv flag (Cyclom-Y);
+ * - control the rflow flag (Cyclom-Y);
+ * - adjust the polling interval (Cyclades-Z);
+ *
+ * Revision 1.36.4.33 1997/06/27 19:00:00 ivan
+ * Fixes related to kernel version conditional
+ * compilation.
+ *
+ * Revision 1.36.4.32 1997/06/14 19:30:00 ivan
+ * Compatibility issues between kernels 2.0.x and
+ * 2.1.x (mainly related to clear_bit function).
+ *
+ * Revision 1.36.4.31 1997/06/03 15:30:00 ivan
+ * Changes to define the memory window according to the
+ * board type.
+ *
+ * Revision 1.36.4.30 1997/05/16 15:30:00 daniel
+ * Changes to suport new cycladesZ boards.
+ *
+ * Revision 1.36.4.29 1997/05/12 11:30:00 daniel
+ * Merge of Bentson's and Daniel's version 1.36.4.28.
+ * Corrects bug in cy_detect_pci: check if there are more
+ * ports than the number of static structs allocated.
+ * Warning message during initialization if this driver is
+ * used with the new generation of cycladesZ boards. Those
+ * will be supported only in next release of the driver.
+ * Corrects bug in cy_detect_pci and cy_detect_isa that
+ * returned wrong number of VALID boards, when a cyclomY
+ * was found with no serial modules connected.
+ * Changes to use current (2.1.x) kernel subroutine names
+ * and created macros for compilation with 2.0.x kernel,
+ * instead of the other way around.
+ *
+ * Revision 1.36.4.28 1997/05/?? ??:00:00 bentson
+ * Change queue_task_irq_off to queue_task_irq.
+ * The inline function queue_task_irq_off (tqueue.h)
+ * was removed from latest releases of 2.1.x kernel.
+ * Use of macro __initfunc to mark the initialization
+ * routines, so memory can be reused.
+ * Also incorporate implementation of critical region
+ * in function cleanup_module() created by anonymous
+ * linuxer.
+ *
+ * Revision 1.36.4.28 1997/04/25 16:00:00 daniel
+ * Change to support new firmware that solves DCD problem:
+ * application could fail to receive SIGHUP signal when DCD
+ * varying too fast.
+ *
+ * Revision 1.36.4.27 1997/03/26 10:30:00 daniel
+ * Changed for suport linux versions 2.1.X.
+ * Backward compatible with linux versions 2.0.X.
+ * Corrected illegal use of filler field in
+ * CH_CTRL struct.
+ * Deleted some debug messages.
+ *
+ * Revision 1.36.4.26 1997/02/27 12:00:00 daniel
+ * Included check for NULL tty pointer in cyz_poll.
+ *
+ * Revision 1.36.4.25 1997/02/26 16:28:30 bentson
+ * Bill Foster at Blarg! Online services noticed that
+ * some of the switch elements of -Z modem control
+ * lacked a closing "break;"
+ *
+ * Revision 1.36.4.24 1997/02/24 11:00:00 daniel
+ * Changed low water threshold for buffer xmit_buf
+ *
+ * Revision 1.36.4.23 1996/12/02 21:50:16 bentson
+ * Marcio provided fix to modem status fetch for -Z
+ *
+ * Revision 1.36.4.22 1996/10/28 22:41:17 bentson
+ * improve mapping of -Z control page (thanks to Steve
+ * Price <stevep@fa.tdktca.com> for help on this)
+ *
+ * Revision 1.36.4.21 1996/09/10 17:00:10 bentson
+ * shift from CPU-bound to memcopy in cyz_polling operation
+ *
+ * Revision 1.36.4.20 1996/09/09 18:30:32 Bentson
+ * Added support to set and report higher speeds.
+ *
+ * Revision 1.36.4.19c 1996/08/09 10:00:00 Marcio Saito
+ * Some fixes in the HW flow control for the BETA release.
+ * Don't try to register the IRQ.
+ *
+ * Revision 1.36.4.19 1996/08/08 16:23:18 Bentson
+ * make sure "cyc" appears in all kernel messages; all soft interrupts
+ * handled by same routine; recognize out-of-band reception; comment
+ * out some diagnostic messages; leave RTS/CTS flow control to hardware;
+ * fix race condition in -Z buffer management; only -Y needs to explictly
+ * flush chars; tidy up some startup messages;
+ *
+ * Revision 1.36.4.18 1996/07/25 18:57:31 bentson
+ * shift MOD_INC_USE_COUNT location to match
+ * serial.c; purge some diagnostic messages;
+ *
+ * Revision 1.36.4.17 1996/07/25 18:01:08 bentson
+ * enable modem status messages and fetch & process them; note
+ * time of last activity type for each port; set_line_char now
+ * supports more than line 0 and treats 0 baud correctly;
+ * get_modem_info senses rs_status;
+ *
+ * Revision 1.36.4.16 1996/07/20 08:43:15 bentson
+ * barely works--now's time to turn on
+ * more features 'til it breaks
+ *
+ * Revision 1.36.4.15 1996/07/19 22:30:06 bentson
+ * check more -Z board status; shorten boot message
+ *
+ * Revision 1.36.4.14 1996/07/19 22:20:37 bentson
+ * fix reference to ch_ctrl in startup; verify return
+ * values from cyz_issue_cmd and cyz_update_channel;
+ * more stuff to get modem control correct;
+ *
+ * Revision 1.36.4.13 1996/07/11 19:53:33 bentson
+ * more -Z stuff folded in; re-order changes to put -Z stuff
+ * after -Y stuff (to make changes clearer)
+ *
+ * Revision 1.36.4.12 1996/07/11 15:40:55 bentson
+ * Add code to poll Cyclades-Z. Add code to get & set RS-232 control.
+ * Add code to send break. Clear firmware ID word at startup (so
+ * that other code won't talk to inactive board).
+ *
+ * Revision 1.36.4.11 1996/07/09 05:28:29 bentson
+ * add code for -Z in set_line_char
+ *
+ * Revision 1.36.4.10 1996/07/08 19:28:37 bentson
+ * fold more -Z stuff (or in some cases, error messages)
+ * into driver; add text to "don't know what to do" messages.
+ *
+ * Revision 1.36.4.9 1996/07/08 18:38:38 bentson
+ * moved compile-time flags near top of file; cosmetic changes
+ * to narrow text (to allow 2-up printing); changed many declarations
+ * to "static" to limit external symbols; shuffled code order to
+ * coalesce -Y and -Z specific code, also to put internal functions
+ * in order of tty_driver structure; added code to recognize -Z
+ * ports (and for moment, do nothing or report error); add cy_startup
+ * to parse boot command line for extra base addresses for ISA probes;
+ *
+ * Revision 1.36.4.8 1996/06/25 17:40:19 bentson
+ * reorder some code, fix types of some vars (int vs. long),
+ * add cy_setup to support user declared ISA addresses
+ *
+ * Revision 1.36.4.7 1996/06/21 23:06:18 bentson
+ * dump ioctl based firmware load (it's now a user level
+ * program); ensure uninitialzed ports cannot be used
+ *
+ * Revision 1.36.4.6 1996/06/20 23:17:19 bentson
+ * rename vars and restructure some code
+ *
+ * Revision 1.36.4.5 1996/06/14 15:09:44 bentson
+ * get right status back after boot load
+ *
+ * Revision 1.36.4.4 1996/06/13 19:51:44 bentson
+ * successfully loads firmware
+ *
+ * Revision 1.36.4.3 1996/06/13 06:08:33 bentson
+ * add more of the code for the boot/load ioctls
+ *
+ * Revision 1.36.4.2 1996/06/11 21:00:51 bentson
+ * start to add Z functionality--starting with ioctl
+ * for loading firmware
+ *
+ * Revision 1.36.4.1 1996/06/10 18:03:02 bentson
+ * added code to recognize Z/PCI card at initialization; report
+ * presence, but card is not initialized (because firmware needs
+ * to be loaded)
*
* Revision 1.36.3.8 1996/06/07 16:29:00 bentson
* starting minor number at zero; added missing verify_area
@@ -261,6 +493,63 @@
*
*/
+/* If you need to install more boards than NR_CARDS, change the constant
+ in the definition below. No other change is necessary to support up to
+ eight boards. Beyond that you'll have to extend cy_isa_addresses. */
+
+#define NR_CARDS 4
+
+/*
+ If the total number of ports is larger than NR_PORTS, change this
+ constant in the definition below. No other change is necessary to
+ support more boards/ports. */
+
+#define NR_PORTS 128
+
+#define ZE_V1_NPORTS 64
+#define ZO_V1 0
+#define ZO_V2 1
+#define ZE_V1 2
+
+#define SERIAL_PARANOIA_CHECK
+#undef CY_DEBUG_OPEN
+#undef CY_DEBUG_THROTTLE
+#undef CY_DEBUG_OTHER
+#undef CY_DEBUG_IO
+#undef CY_DEBUG_COUNT
+#undef CY_DEBUG_DTR
+#undef CY_DEBUG_WAIT_UNTIL_SENT
+#undef CY_16Y_HACK
+#undef CY_ENABLE_MONITORING
+#undef CY_PCI_DEBUG
+
+#if 0
+#define PAUSE __asm__("nop");
+#else
+#define PAUSE ;
+#endif
+
+#define cy_min(a,b) (((a)<(b))?(a):(b))
+
+#if 0
+/********
+ * For the next two macros, it is assumed that the buffer size is a
+ * power of 2
+ ********/
+
+#define CHARS_IN_BUF(buf_ctrl) \
+ ((cy_readl(&buf_ctrl->rx_put) - \
+ cy_readl(&buf_ctrl->rx_get) + \
+ cy_readl(&buf_ctrl->rx_bufsize)) & \
+ (cy_readl(&buf_ctrl->rx_bufsize) - 1))
+
+#define SPACE_IN_BUF(buf_ctrl) \
+ ((cy_readl(&buf_ctrl->tx_get) - \
+ cy_readl(&buf_ctrl->tx_put) + \
+ cy_readl(&buf_ctrl->tx_bufsize) - 1) & \
+ (cy_readl(&buf_ctrl->tx_bufsize) - 1))
+#endif
+
#include <linux/module.h>
#include <linux/errno.h>
@@ -289,30 +578,44 @@
#include <linux/bios32.h>
#include <linux/pci.h>
-#define small_delay(x) for(j=0;j<x;j++)k++;
+#include <linux/version.h>
+#ifdef CONFIG_PROC_FS
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#endif
-#define SERIAL_PARANOIA_CHECK
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_THROTTLE
-#undef SERIAL_DEBUG_OTHER
-#undef SERIAL_DEBUG_IO
-#undef SERIAL_DEBUG_COUNT
-#undef SERIAL_DEBUG_DTR
-#undef CYCLOM_16Y_HACK
-#undef CYCLOM_ENABLE_MONITORING
+#define __initfunc(__arginit) __arginit
+#define copy_from_user memcpy_fromfs
+#define copy_to_user memcpy_tofs
+#define cy_get_user get_fs_long
+#define cy_put_user put_fs_long
+#define ioremap vremap
#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
#endif
-#define WAKEUP_CHARS 256
+#define IS_CYC_Z(card) ((card).num_chips == -1)
+
+#define Z_FPGA_CHECK(card) \
+ ((cy_readl(&((struct RUNTIME_9060 *) \
+ ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
+
+#define ISZLOADED(card) (((ZO_V1==cy_readl(&((struct RUNTIME_9060 *) \
+ ((card).ctl_addr))->mail_box_0)) || \
+ Z_FPGA_CHECK(card)) && \
+ (ZFIRM_ID==cy_readl(&((struct FIRM_ID *) \
+ ((card).base_addr+ID_ADDRESS))->signature)))
+
+#define WAKEUP_CHARS (SERIAL_XMIT_SIZE-256)
#define STD_COM_FLAGS (0)
#define SERIAL_TYPE_NORMAL 1
#define SERIAL_TYPE_CALLOUT 2
+#define JIFFIES_DIFF(n, j) ((j) - (n))
DECLARE_TASK_QUEUE(tq_cyclades);
@@ -321,75 +624,41 @@
static volatile int cy_irq_triggered;
static volatile int cy_triggered;
static int cy_wild_int_mask;
-static unsigned char *intr_base_addr;
+static volatile ucchar *intr_base_addr;
-
-/* This is the address lockup table. The driver will probe for Cyclom-Y/ISA
- boards at all addresses in here. If you want the driver to probe addresses
- in a different address, add it to this table.
- If the driver is probing some other board and causing problems, remove the
- address from this table. */
+/* This is the address lookup table. The driver will probe for
+ Cyclom-Y/ISA boards at all addresses in here. If you want the
+ driver to probe addresses at a different address, add it to
+ this table. If the driver is probing some other board and
+ causing problems, remove the offending address from this table.
+ The cy_setup function extracts additional addresses from the
+ boot options line. The form is "cyclades=address,address..."
+*/
static unsigned char *cy_isa_addresses[] = {
- (unsigned char *) 0xD0000,
- (unsigned char *) 0xD2000,
- (unsigned char *) 0xD4000,
- (unsigned char *) 0xD6000,
- (unsigned char *) 0xD8000,
- (unsigned char *) 0xDA000,
- (unsigned char *) 0xDC000,
- (unsigned char *) 0xDE000,
+ (unsigned char *) 0xD0000,
+ (unsigned char *) 0xD2000,
+ (unsigned char *) 0xD4000,
+ (unsigned char *) 0xD6000,
+ (unsigned char *) 0xD8000,
+ (unsigned char *) 0xDA000,
+ (unsigned char *) 0xDC000,
+ (unsigned char *) 0xDE000,
+ 0,0,0,0,0,0,0,0
};
-#define NR_ISA_ADDRESSES (sizeof(cy_isa_addresses)/sizeof(unsigned char *))
+#define NR_ISA_ADDRS (sizeof(cy_isa_addresses)/sizeof(unsigned char*))
/* This is the per-card data structure containing address, irq, number of
- channels, etc. This driver supports a maximum of NR_CARDS cards. If
- you need to install more boards, change this constant in the definition
- below. No other change is necessary to support more boards. */
-
-#define NR_CARDS 4
-
+ channels, etc. This driver supports a maximum of NR_CARDS cards.
+*/
static struct cyclades_card cy_card[NR_CARDS];
/* This is the per-channel data structure containing pointers, flags
- and variables for the port. This driver supports a maximum of NR_PORTS.
- If the total number of ports is larger than NR_PORTS, change this
- constant in the definition below. No other change is necessary to
- support more boards/ports. */
-
-#define NR_PORTS 64
-
+ and variables for the port. This driver supports a maximum of NR_PORTS.
+*/
static struct cyclades_port cy_port[NR_PORTS];
-/* The Cyclom-Ye has placed the sequential chips in non-sequential
- * address order. This look-up table overcomes that problem.
- */
-static int cy_chip_offset [] =
- { 0x0000,
- 0x0400,
- 0x0800,
- 0x0C00,
- 0x0200,
- 0x0600,
- 0x0A00,
- 0x0E00
- };
-
-/* PCI related definitions */
-
-static unsigned short cy_pci_nboard = 0;
-static unsigned short cy_isa_nboard = 0;
-static unsigned short cy_nboard = 0;
-static unsigned short cy_pci_dev_id[] = {
- PCI_DEVICE_ID_CYCLOM_Y_Lo,/* PCI below 1Mb */
- PCI_DEVICE_ID_CYCLOM_Y_Hi,/* PCI above 1Mb */
- 0 /* end of table */
- };
-
-int cy_detect_isa(void);
-int cy_detect_pci(void);
-
-static int cy_next_channel = 0; /* next minor available */
+static int cy_next_channel = 0; /* next minor available */
static int serial_refcount;
@@ -400,17 +669,18 @@
/* This is the per-irq data structure,
it maps an irq to the corresponding card */
-struct cyclades_card *IRQ_cards[16];
+static struct cyclades_card *IRQ_cards[16];
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
+ * lock it in case the copy_from_user blocks while swapping in a page,
* and some other program tries to do a serial write at the same time.
* Since the lock will only come under contention when the system is
* swapping and available memory is low, it makes sense to share one
* buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
+ * memory if large numbers of serial ports are open. This buffer is
+ * allocated when the first cy_open occurs.
*/
static unsigned char *tmp_buf = 0;
static struct semaphore tmp_buf_sem = MUTEX;
@@ -419,83 +689,173 @@
* This is used to look up the divisor speeds and the timeouts
* We're normally limited to 15 distinct baud rates. The extra
* are accessed via settings in info->flags.
- * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
- * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
- * HI VHI
+ * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
+ * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
+ * HI VHI
+ * 20
*/
static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
- 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000,
- 0};
-
-static char baud_co[] = { /* 25 MHz clock option table */
- /* value => 00 01 02 03 04 */
- /* divide by 8 32 128 512 2048 */
- 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
- 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-static char baud_bpr[] = { /* 25 MHz baud rate period table */
- 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
- 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15};
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
+ 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000,
+ 230400, 0};
+
+static char baud_co_25[] = { /* 25 MHz clock option table */
+ /* value => 00 01 02 03 04 */
+ /* divide by 8 32 128 512 2048 */
+ 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
+ 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+static char baud_bpr_25[] = { /* 25 MHz baud rate period table */
+ 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
+ 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15};
+
+static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
+ /* value => 00 01 02 03 04 */
+ /* divide by 8 32 128 512 2048 */
+ 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
+ 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00};
+
+static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
+ 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
+ 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
+ 0x21};
static char baud_cor3[] = { /* receive threshold */
- 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
- 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07};
+ 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
+ 0x07};
+
+/*
+ * The Cyclades driver implements HW flow control as any serial driver.
+ * The cyclades_port structure member rflow and the vector rflow_thr
+ * allows us to take advantage of a special feature in the CD1400 to avoid
+ * data loss even when the system interrupt latency is too high. These flags
+ * are to be used only with very special applications. Setting these flags
+ * requires the use of a special cable (DTR and RTS reversed). In the new
+ * CD1400-based boards (rev. 6.00 or later), there is no need for special
+ * cables.
+ */
+
+static char rflow_thr[] = { /* rflow threshold */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a};
+/* The Cyclom-Ye has placed the sequential chips in non-sequential
+ * address order. This look-up table overcomes that problem.
+ */
+static int cy_chip_offset [] =
+ { 0x0000,
+ 0x0400,
+ 0x0800,
+ 0x0C00,
+ 0x0200,
+ 0x0600,
+ 0x0A00,
+ 0x0E00
+ };
+/* PCI related definitions */
-static void shutdown(struct cyclades_port *);
-static int startup (struct cyclades_port *);
-static void cy_throttle(struct tty_struct *);
-static void cy_unthrottle(struct tty_struct *);
-static void config_setup(struct cyclades_port *);
-#ifdef CYCLOM_SHOW_STATUS
+static unsigned short cy_pci_nboard = 0;
+static unsigned short cy_isa_nboard = 0;
+static unsigned short cy_nboard = 0;
+static unsigned short cy_pci_dev_id[] = {
+ PCI_DEVICE_ID_CYCLOM_Y_Lo,/* PCI below 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Y_Hi,/* PCI above 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Z_Lo,/* PCI below 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Z_Hi,/* PCI above 1Mb */
+ 0 /* end of table */
+ };
+
+
+static void cy_start(struct tty_struct *);
+static void set_line_char(struct cyclades_port *);
+static void cy_probe(int, void *, struct pt_regs *);
+static void cyz_poll(unsigned long);
+#ifdef CY_SHOW_STATUS
static void show_status(int);
#endif
+#if defined(CONFIG_PROC_FS) && !defined(MODULE)
+static int cyclades_get_proc_info(char *, char **, off_t, int, int);
+static struct proc_dir_entry cyclades_proc_entry = {
+ 0,
+ 8,
+ "cyclades",
+ S_IFREG | S_IRUGO,
+ 1,
+ 0,
+ 0,
+ 0,
+ 0,
+ cyclades_get_proc_info
+};
+#endif
+
+/* The Cyclades-Z polling cycle is defined by this variable */
+static long cyz_polling_cycle = CZ_DEF_POLL;
+
+static int cyz_timeron = 0;
+static struct timer_list
+cyz_timerlist = {
+ NULL, NULL, 0, 0, cyz_poll
+};
+
+/**************************************************
+error = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned long));
+copy_to_user (to, from, count);
+***************************************************************
+error = verify_area(VERIFY_READ, (void *) arg, sizeof(unsigned long *));
+copy_from_user(to, from, count);
+**************************************************/
+
static inline int
serial_paranoia_check(struct cyclades_port *info,
- kdev_t device, const char *routine)
+ kdev_t device, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
- "Warning: bad magic number for serial struct (%s) in %s\n";
+ "cyc Warning: bad magic number for serial struct (%s) in %s\n";
static const char *badinfo =
- "Warning: null cyclades_port for (%s) in %s\n";
+ "cyc Warning: null cyclades_port for (%s) in %s\n";
static const char *badrange =
- "Warning: cyclades_port out of range for (%s) in %s\n";
+ "cyc Warning: cyclades_port out of range for (%s) in %s\n";
if (!info) {
- printk(badinfo, kdevname(device), routine);
- return 1;
+ printk(badinfo, kdevname(device), routine);
+ return 1;
}
if( (long)info < (long)(&cy_port[0])
|| (long)(&cy_port[NR_PORTS]) < (long)info ){
- printk(badrange, kdevname(device), routine);
- return 1;
+ printk(badrange, kdevname(device), routine);
+ return 1;
}
if (info->magic != CYCLADES_MAGIC) {
- printk(badmagic, kdevname(device), routine);
- return 1;
+ printk(badmagic, kdevname(device), routine);
+ return 1;
}
#endif
- return 0;
+ return 0;
} /* serial_paranoia_check */
+
/* The following diagnostic routines allow the driver to spew
information on the screen, even (especially!) during interrupts.
*/
-void
+static void
SP(char *data){
unsigned long flags;
save_flags(flags); cli();
console_print(data);
restore_flags(flags);
-}
-void
+}/* SP */
+
+static void
CP(char data){
unsigned long flags;
char scrn[2];
@@ -506,111 +866,17 @@
restore_flags(flags);
}/* CP */
-void CP1(int data) { (data<10)? CP(data+'0'): CP(data+'A'-10); }/* CP1 */
-void CP2(int data) { CP1((data>>4) & 0x0f); CP1( data & 0x0f); }/* CP2 */
-void CP4(int data) { CP2((data>>8) & 0xff); CP2(data & 0xff); }/* CP4 */
-void CP8(long data) { CP4((data>>16) & 0xffff); CP4(data & 0xffff); }/* CP8 */
-
-/* This routine waits up to 1000 micro-seconds for the previous
- command to the Cirrus chip to complete and then issues the
- new command. An error is returned if the previous command
- didn't finish within the time limit.
- */
-u_short
-write_cy_cmd(u_char *base_addr, u_char cmd, int index)
-{
- unsigned long flags;
- volatile int i;
-
- save_flags(flags); cli();
- /* Check to see that the previous command has completed */
- for(i = 0 ; i < 100 ; i++){
- if (base_addr[CyCCR<<index] == 0){
- break;
- }
- udelay(10L);
- }
- /* if the CCR never cleared, the previous command
- didn't finish within the "reasonable time" */
- if ( i == 100 ) {
- restore_flags(flags);
- return (-1);
- }
-
- /* Issue the new command */
- base_addr[CyCCR<<index] = cmd;
- restore_flags(flags);
- return(0);
-} /* write_cy_cmd */
-
-
-/* cy_start and cy_stop provide software output flow control as a
- function of XON/XOFF, software CTS, and other such stuff. */
-
-static void
-cy_stop(struct tty_struct *tty)
-{
- struct cyclades_card *cinfo;
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned char *base_addr;
- int chip,channel,index;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_stop ttyC%d\n", info->line); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->device, "cy_stop"))
- return;
-
- cinfo = &cy_card[info->card];
- index = cinfo->bus_index;
- channel = info->line - cinfo->first_line;
- chip = channel>>2;
- channel &= 0x03;
- base_addr = (unsigned char*)
- (cy_card[info->card].base_addr + (cy_chip_offset[chip]<<index));
-
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)(channel & 0x0003); /* index channel */
- base_addr[CySRER<<index] &= ~CyTxMpty;
- restore_flags(flags);
-
- return;
-} /* cy_stop */
-
-static void
-cy_start(struct tty_struct *tty)
-{
- struct cyclades_card *cinfo;
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned char *base_addr;
- int chip,channel,index;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_start ttyC%d\n", info->line); /* */
+static void CP4(int data)
+ { (data<10)? CP(data+'0'): CP(data+'A'-10); }/* CP4 */
+static void CP8(int data)
+ { CP4((data>>4) & 0x0f); CP4( data & 0x0f); }/* CP8 */
+#if 0
+static void CP16(int data)
+ { CP8((data>>8) & 0xff); CP8(data & 0xff); }/* CP16 */
+static void CP32(long data)
+ { CP16((data>>16) & 0xffff); CP16(data & 0xffff); }/* CP32 */
#endif
- if (serial_paranoia_check(info, tty->device, "cy_start"))
- return;
-
- cinfo = &cy_card[info->card];
- index = cinfo->bus_index;
- channel = info->line - cinfo->first_line;
- chip = channel>>2;
- channel &= 0x03;
- base_addr = (unsigned char*)
- (cy_card[info->card].base_addr + (cy_chip_offset[chip]<<index));
-
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)(channel & 0x0003);
- base_addr[CySRER<<index] |= CyTxMpty;
- restore_flags(flags);
-
- return;
-} /* cy_start */
-
/*
* This routine is used by the interrupt handler to schedule
@@ -622,304 +888,601 @@
cy_sched_event(struct cyclades_port *info, int event)
{
info->event |= 1 << event; /* remember what kind of event and who */
- queue_task_irq_off(&info->tqueue, &tq_cyclades); /* it belongs to */
+ queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */
mark_bh(CYCLADES_BH); /* then trigger event */
} /* cy_sched_event */
-static int probe_ready;
-
/*
- * This interrupt routine is used
- * while we are probing for submarines.
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using cy_sched_event(), and they get done here.
+ *
+ * This is done through one level of indirection--the task queue.
+ * When a hardware interrupt service routine wants service by the
+ * driver's bottom half, it enqueues the appropriate tq_struct (one
+ * per port) to the tq_cyclades work queue and sets a request flag
+ * via mark_bh for processing that queue. When the time is right,
+ * do_cyclades_bh is called (because of the mark_bh) and it requests
+ * that the work queue be processed.
+ *
+ * Although this may seem unwieldy, it gives the system a way to
+ * pass an argument (in this case the pointer to the cyclades_port
+ * structure) to the bottom half of the driver. Previous kernels
+ * had to poll every port to see if that port needed servicing.
*/
static void
-cy_probe(int irq, void *dev_id, struct pt_regs *regs)
+do_cyclades_bh(void)
{
- int save_xir, save_car;
- int index = 0; /* probing interrupts is only for ISA */
+ run_task_queue(&tq_cyclades);
+} /* do_cyclades_bh */
- if (!probe_ready) {
- *(intr_base_addr + (Cy_ClrIntr<<index)) = 0;
+static void
+do_softint(void *private_)
+{
+ struct cyclades_port *info = (struct cyclades_port *) private_;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
return;
+
+ if (clear_bit(Cy_EVENT_HANGUP, &info->event)) {
+ tty_hangup(info->tty);
+ wake_up_interruptible(&info->open_wait);
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|
+ ASYNC_CALLOUT_ACTIVE);
+ }
+ if (clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
+ wake_up_interruptible(&info->open_wait);
+ }
+ if (clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
+ if((tty->flags & (1<< TTY_DO_WRITE_WAKEUP))
+ && tty->ldisc.write_wakeup){
+ (tty->ldisc.write_wakeup)(tty);
+ }
+ wake_up_interruptible(&tty->write_wait);
}
+#ifdef Z_WAKE
+ if (clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) {
+ wake_up_interruptible(&info->shutdown_wait);
+ }
+#endif
+} /* do_softint */
- cy_irq_triggered = irq;
- cy_triggered |= 1 << irq;
- if(intr_base_addr[CySVRR<<index] != 0) {
- save_xir = (u_char) intr_base_addr[CyTIR<<index];
- save_car = intr_base_addr[CyCAR<<index];
- if ((save_xir & 0x3) != 0){
- SP("channel ");
- CP2(save_xir);
- SP(" requesting unexpected interrupt\n");
- }
- intr_base_addr[CyCAR<<index] = (save_xir & 0x3);
- intr_base_addr[CySRER<<index] &= ~CyTxMpty;
- intr_base_addr[CyTIR<<index] = (save_xir & 0x3f);
- intr_base_addr[CyCAR<<index] = (save_car);
- }
- *(intr_base_addr + (Cy_ClrIntr<<index)) = 0; /* Cy_ClrIntr is 0x1800 */
- return;
-} /* cy_probe */
+/***********************************************************/
+/********* Start of block of Cyclom-Y specific code ********/
-/* The real interrupt service routine is called
- whenever the card wants its hand held--chars
- received, out buffer empty, modem change, etc.
+/* This routine waits up to 1000 micro-seconds for the previous
+ command to the Cirrus chip to complete and then issues the
+ new command. An error is returned if the previous command
+ didn't finish within the time limit.
*/
-static void
-cy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static int
+cyy_issue_cmd(volatile ucchar *base_addr, u_char cmd, int index)
{
- struct tty_struct *tty;
- int status;
- struct cyclades_card *cinfo;
- struct cyclades_port *info;
- volatile unsigned char *base_addr, *card_base_addr;
- int chip;
- int save_xir, channel, save_car;
- char data;
- int char_count;
- int outch;
- int i,j,index;
- int too_many;
- int had_work;
- int mdm_change;
- int mdm_status;
+ unsigned long flags;
+ volatile int i;
- if((cinfo = IRQ_cards[irq]) == 0){
- return; /* spurious interrupt */
- }
+ save_flags(flags); cli();
+ /* Check to see that the previous command has completed */
+ for(i = 0 ; i < 100 ; i++){
+ if (cy_readb(base_addr+(CyCCR<<index)) == 0){
+ break;
+ }
+ udelay(10L);
+ }
+ /* if the CCR never cleared, the previous command
+ didn't finish within the "reasonable time" */
+ if ( i == 100 ) {
+ restore_flags(flags);
+ return (-1);
+ }
- card_base_addr = (unsigned char *)cinfo->base_addr;
- index = cinfo->bus_index;
+ /* Issue the new command */
+ cy_writeb((u_long)base_addr+(CyCCR<<index), cmd);
+ restore_flags(flags);
+ return(0);
+} /* cyy_issue_cmd */
- /* This loop checks all chips in the card. Make a note whenever
- _any_ chip had some work to do, as this is considered an
- indication that there will be more to do. Only when no chip
- has any work does this outermost loop exit.
- */
- do{
- had_work = 0;
- for ( chip = 0 ; chip < cinfo->num_chips ; chip ++) {
- base_addr = (unsigned char *)
- (cinfo->base_addr + (cy_chip_offset[chip]<<index));
- too_many = 0;
- while ( (status = base_addr[CySVRR<<index]) != 0x00) {
- had_work++;
- /* The purpose of the following test is to ensure that
- no chip can monopolize the driver. This forces the
+static int probe_ready;
+
+/*
+ * Grab all interrupts in preparation for doing an automatic irq
+ * detection. dontgrab is a mask of irq's _not_ to grab. Returns a
+ * mask of irq's which were grabbed and should therefore be freed
+ * using free_all_interrupts().
+ */
+static int
+grab_all_interrupts(int dontgrab)
+{
+ int irq_lines = 0;
+ int i, mask;
+
+ for (i = 0, mask = 1; i < 16; i++, mask <<= 1) {
+ if (!(mask & dontgrab)
+ && !request_irq(i, cy_probe,
+ SA_INTERRUPT, "serial probe", NULL)) {
+ irq_lines |= mask;
+ }
+ }
+ return irq_lines;
+} /* grab_all_interrupts */
+
+/*
+ * Release all interrupts grabbed by grab_all_interrupts
+ */
+static void
+free_all_interrupts(int irq_lines)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ if (irq_lines & (1 << i)) {
+ free_irq(i,NULL);
+ }
+ }
+} /* free_all_interrupts */
+
+/*
+ * This routine returns a bitfield of "wild interrupts". Basically,
+ * any unclaimed interrupts which is flapping around.
+ */
+static int
+check_wild_interrupts(void)
+{
+ int i, mask;
+ int wild_interrupts = 0;
+ int irq_lines;
+ unsigned long timeout;
+ unsigned long flags;
+
+ /*Turn on interrupts (they may be off) */
+ save_flags(flags); sti();
+
+ irq_lines = grab_all_interrupts(0);
+
+ /*
+ * Delay for 0.1 seconds -- we use a busy loop since this may
+ * occur during the bootup sequence
+ */
+ timeout = jiffies+(HZ/10);
+ while (timeout >= jiffies)
+ ;
+
+ cy_triggered = 0; /* Reset after letting things settle */
+
+ timeout = jiffies+(HZ/10);
+ while (timeout >= jiffies)
+ ;
+
+ for (i = 0, mask = 1; i < 16; i++, mask <<= 1) {
+ if ((cy_triggered & (1 << i)) &&
+ (irq_lines & (1 << i))) {
+ wild_interrupts |= mask;
+ }
+ }
+ free_all_interrupts(irq_lines);
+ restore_flags(flags);
+ return wild_interrupts;
+} /* check_wild_interrupts */
+
+/*
+ * This routine is called by do_auto_irq(); it attempts to determine
+ * which interrupt a serial port is configured to use. It is not
+ * fool-proof, but it works a large part of the time.
+ */
+static int
+get_auto_irq(volatile ucchar *address)
+{
+ unsigned long timeout;
+ volatile ucchar *base_addr;
+ int index;
+ unsigned long flags;
+
+ index = 0; /* IRQ probing is only for ISA */
+ base_addr = address;
+ intr_base_addr = address;
+
+ /*
+ * Enable interrupts and see who answers
+ */
+ cy_irq_triggered = 0;
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), 0);
+ cyy_issue_cmd(base_addr,CyCHAN_CTL|CyENB_XMTR,index);
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyTxMpty);
+ probe_ready = 1;
+ restore_flags(flags);
+
+ timeout = jiffies+(HZ/50);
+ while (timeout >= jiffies) {
+ if (cy_irq_triggered)
+ break;
+ }
+ probe_ready = 0;
+ return(cy_irq_triggered);
+} /* get_auto_irq */
+
+/*
+ * Calls get_auto_irq() multiple times, to make sure we don't get
+ * faked out by random interrupts
+ */
+static int
+do_auto_irq(volatile ucchar *address)
+{
+ int irq_lines = 0;
+ int irq_try_1 = 0, irq_try_2 = 0;
+ int retries;
+ unsigned long flags;
+
+ /* Turn on interrupts (they may be off) */
+ save_flags(flags); sti();
+
+ probe_ready = 0;
+
+ cy_wild_int_mask = check_wild_interrupts();
+
+ irq_lines = grab_all_interrupts(cy_wild_int_mask);
+
+ for (retries = 0; retries < 5; retries++) {
+ if (!irq_try_1)
+ irq_try_1 = get_auto_irq(address);
+ if (!irq_try_2)
+ irq_try_2 = get_auto_irq(address);
+ if (irq_try_1 && irq_try_2) {
+ if (irq_try_1 == irq_try_2)
+ break;
+ irq_try_1 = irq_try_2 = 0;
+ }
+ }
+ restore_flags(flags);
+ free_all_interrupts(irq_lines);
+ return (irq_try_1 == irq_try_2) ? irq_try_1 : 0;
+} /* do_auto_irq */
+
+
+/*
+ * This interrupt routine is used
+ * while we are probing for submarines.
+ */
+static void
+cy_probe(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int save_xir, save_car;
+ int index = 0; /* probing interrupts is only for ISA */
+
+ if (!probe_ready) {
+ cy_writeb((u_long)intr_base_addr+(Cy_ClrIntr<<index), 0);
+ return;
+ }
+
+ cy_irq_triggered = irq;
+ cy_triggered |= 1 << irq;
+
+ if(cy_readb(intr_base_addr+(CySVRR<<index)) != 0) {
+ save_xir = (u_char) cy_readb(intr_base_addr+(CyTIR<<index));
+ save_car = cy_readb(intr_base_addr+(CyCAR<<index));
+ if ((save_xir & 0x3) != 0){
+ SP("channel ");
+ CP8(save_xir);
+ SP(" requesting unexpected interrupt\n");
+ }
+ cy_writeb((u_long)intr_base_addr+(CyCAR<<index), (save_xir & 0x3));
+ cy_writeb((u_long)intr_base_addr+(CySRER<<index),
+ cy_readb(intr_base_addr+(CySRER<<index)) & ~CyTxMpty);
+ cy_writeb((u_long)intr_base_addr+(CyTIR<<index), (save_xir & 0x3f));
+ cy_writeb((u_long)intr_base_addr+(CyCAR<<index), (save_car));
+ }
+ cy_writeb((u_long)intr_base_addr+(Cy_ClrIntr<<index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+ return;
+} /* cy_probe */
+
+/* The real interrupt service routine is called
+ whenever the card wants its hand held--chars
+ received, out buffer empty, modem change, etc.
+ */
+static void
+cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct tty_struct *tty;
+ int status;
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info;
+ volatile unsigned char *base_addr, *card_base_addr;
+ int chip;
+ int save_xir, channel, save_car;
+ char data;
+ volatile int char_count;
+ int outch;
+ int i,j,index;
+ int too_many;
+ int had_work;
+ int mdm_change;
+ int mdm_status;
+
+ if((cinfo = IRQ_cards[irq]) == 0){
+#ifdef CY_DEBUG_INTERRUPTS
+printk("cy_interrupt: spurious interrupt %d\n\r", irq);
+#endif
+ return; /* spurious interrupt */
+ }
+
+ card_base_addr = (unsigned char *)cinfo->base_addr;
+ index = cinfo->bus_index;
+
+
+ /* This loop checks all chips in the card. Make a note whenever
+ _any_ chip had some work to do, as this is considered an
+ indication that there will be more to do. Only when no chip
+ has any work does this outermost loop exit.
+ */
+ do{
+ had_work = 0;
+ for ( chip = 0 ; chip < cinfo->num_chips ; chip ++) {
+ base_addr = (unsigned char *)
+ (cinfo->base_addr + (cy_chip_offset[chip]<<index));
+ too_many = 0;
+ while ( (status = cy_readb(base_addr+(CySVRR<<index))) != 0x00) {
+ had_work++;
+ /* The purpose of the following test is to ensure that
+ no chip can monopolize the driver. This forces the
chips to be checked in a round-robin fashion (after
draining each of a bunch (1000) of characters).
- */
+ */
if(1000<too_many++){
break;
}
- if (status & CySRReceive) { /* reception interrupt */
- /* determine the channel and change to that context */
- save_xir = (u_char) base_addr[CyRIR<<index];
+ if (status & CySRReceive) { /* reception interrupt */
+#ifdef CY_DEBUG_INTERRUPTS
+printk("cy_interrupt: rcvd intr, chip %d\n\r", chip);
+#endif
+ /* determine the channel & change to that context */
+ save_xir = (u_char) cy_readb(base_addr+(CyRIR<<index));
channel = (u_short ) (save_xir & CyIRChannel);
i = channel + chip * 4 + cinfo->first_line;
info = &cy_port[i];
info->last_active = jiffies;
- save_car = base_addr[CyCAR<<index];
- base_addr[CyCAR<<index] = save_xir;
+ save_car = cy_readb(base_addr+(CyCAR<<index));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), save_xir);
/* if there is nowhere to put the data, discard it */
if(info->tty == 0){
- j = (base_addr[CyRIVR<<index] & CyIVRMask);
+ j = (cy_readb(base_addr+(CyRIVR<<index)) & CyIVRMask);
if ( j == CyIVRRxEx ) { /* exception */
- data = base_addr[CyRDSR<<index];
+ data = cy_readb(base_addr+(CyRDSR<<index));
} else { /* normal character reception */
- char_count = base_addr[CyRDCR<<index];
+ char_count = cy_readb(base_addr+(CyRDCR<<index));
while(char_count--){
- data = base_addr[CyRDSR<<index];
+ data = cy_readb(base_addr+(CyRDSR<<index));
}
}
}else{ /* there is an open port for this data */
tty = info->tty;
- j = (base_addr[CyRIVR<<index] & CyIVRMask);
+ j = (cy_readb(base_addr+(CyRIVR<<index)) & CyIVRMask);
if ( j == CyIVRRxEx ) { /* exception */
- data = base_addr[CyRDSR<<index];
+ data = cy_readb(base_addr+(CyRDSR<<index));
if(data & info->ignore_status_mask){
continue;
}
if (tty->flip.count < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
- if (data & info->read_status_mask){
- if(data & CyBREAK){
- *tty->flip.flag_buf_ptr++ =
- TTY_BREAK;
- *tty->flip.char_buf_ptr++ =
- base_addr[CyRDSR<<index];
- if (info->flags & ASYNC_SAK){
- do_SAK(tty);
- }
- }else if(data & CyFRAME){
- *tty->flip.flag_buf_ptr++ =
- TTY_FRAME;
- *tty->flip.char_buf_ptr++ =
- base_addr[CyRDSR<<index];
- }else if(data & CyPARITY){
- *tty->flip.flag_buf_ptr++ =
- TTY_PARITY;
- *tty->flip.char_buf_ptr++ =
- base_addr[CyRDSR<<index];
- }else if(data & CyOVERRUN){
- *tty->flip.flag_buf_ptr++ =
- TTY_OVERRUN;
- *tty->flip.char_buf_ptr++ = 0;
- /* If the flip buffer itself is
- overflowing, we still loose
- the next incoming character.
- */
- if(tty->flip.count < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ =
- TTY_NORMAL;
- *tty->flip.char_buf_ptr++ =
- base_addr[CyRDSR<<index];
- }
- /* These two conditions may imply */
- /* a normal read should be done. */
- /* }else if(data & CyTIMEOUT){ */
- /* }else if(data & CySPECHAR){ */
- }else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
- }
- }else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
- }
+ tty->flip.count++;
+ if (data & info->read_status_mask){
+ if(data & CyBREAK){
+ *tty->flip.flag_buf_ptr++ =
+ TTY_BREAK;
+ *tty->flip.char_buf_ptr++ =
+ cy_readb(base_addr+(CyRDSR<<index));
+ if (info->flags & ASYNC_SAK){
+ do_SAK(tty);
+ }
+ }else if(data & CyFRAME){
+ *tty->flip.flag_buf_ptr++ =
+ TTY_FRAME;
+ *tty->flip.char_buf_ptr++ =
+ cy_readb(base_addr+(CyRDSR<<index));
+ info->idle_stats.frame_errs++;
+ }else if(data & CyPARITY){
+ *tty->flip.flag_buf_ptr++ =
+ TTY_PARITY;
+ *tty->flip.char_buf_ptr++ =
+ cy_readb(base_addr+(CyRDSR<<index));
+ info->idle_stats.parity_errs++;
+ }else if(data & CyOVERRUN){
+ *tty->flip.flag_buf_ptr++ =
+ TTY_OVERRUN;
+ *tty->flip.char_buf_ptr++ = 0;
+ /* If the flip buffer itself is
+ overflowing, we still loose
+ the next incoming character.
+ */
+ if(tty->flip.count
+ < TTY_FLIPBUF_SIZE){
+ tty->flip.count++;
+ *tty->flip.flag_buf_ptr++ =
+ TTY_NORMAL;
+ *tty->flip.char_buf_ptr++ =
+ cy_readb(base_addr+(CyRDSR<<index));
+ }
+ info->idle_stats.overruns++;
+ /* These two conditions may imply */
+ /* a normal read should be done. */
+ /* }else if(data & CyTIMEOUT){ */
+ /* }else if(data & CySPECHAR){ */
+ }else{
+ *tty->flip.flag_buf_ptr++ = 0;
+ *tty->flip.char_buf_ptr++ = 0;
+ }
+ }else{
+ *tty->flip.flag_buf_ptr++ = 0;
+ *tty->flip.char_buf_ptr++ = 0;
+ }
}else{
- /* there was a software buffer overrun
- and nothing could be done about it!!! */
+ /* there was a software buffer
+ overrun and nothing could be
+ done about it!!! */
+ info->idle_stats.overruns++;
}
} else { /* normal character reception */
- /* load # characters available from the chip */
- char_count = base_addr[CyRDCR<<index];
+ /* load # chars available from the chip */
+ char_count = cy_readb(base_addr+(CyRDCR<<index));
-#ifdef CYCLOM_ENABLE_MONITORING
- ++info->mon.int_count;
- info->mon.char_count += char_count;
- if (char_count > info->mon.char_max)
- info->mon.char_max = char_count;
- info->mon.char_last = char_count;
+#ifdef CY_ENABLE_MONITORING
+ ++info->mon.int_count;
+ info->mon.char_count += char_count;
+ if (char_count > info->mon.char_max)
+ info->mon.char_max = char_count;
+ info->mon.char_last = char_count;
#endif
+ info->idle_stats.recv_bytes += char_count;
+ info->idle_stats.recv_idle = jiffies;
+
while(char_count--){
- if (tty->flip.count >= TTY_FLIPBUF_SIZE){
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE){
break;
}
- tty->flip.count++;
- data = base_addr[CyRDSR<<index];
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = data;
-#ifdef CYCLOM_16Y_HACK
- udelay(10L);
+ tty->flip.count++;
+ data = cy_readb(base_addr+(CyRDSR<<index));
+ *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+ *tty->flip.char_buf_ptr++ = data;
+#ifdef CY_16Y_HACK
+ udelay(10L);
#endif
}
}
- queue_task_irq_off(&tty->flip.tqueue, &tq_timer);
+ queue_task(&tty->flip.tqueue, &tq_timer);
}
/* end of service */
- base_addr[CyRIR<<index] = (save_xir & 0x3f);
- base_addr[CyCAR<<index] = (save_car);
+ cy_writeb((u_long)base_addr+(CyRIR<<index), (save_xir & 0x3f));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (save_car));
}
- if (status & CySRTransmit) { /* transmission interrupt */
- /* Since we only get here when the transmit buffer is empty,
- we know we can always stuff a dozen characters. */
+ if (status & CySRTransmit) { /* transmission interrupt */
+ /* Since we only get here when the transmit buffer
+ is empty, we know we can always stuff a dozen
+ characters. */
+#ifdef CY_DEBUG_INTERRUPTS
+printk("cy_interrupt: xmit intr, chip %d\n\r", chip);
+#endif
- /* determine the channel and change to that context */
- save_xir = (u_char) base_addr[CyTIR<<index];
+ /* determine the channel & change to that context */
+ save_xir = (u_char) cy_readb(base_addr+(CyTIR<<index));
channel = (u_short ) (save_xir & CyIRChannel);
i = channel + chip * 4 + cinfo->first_line;
- save_car = base_addr[CyCAR<<index];
- base_addr[CyCAR<<index] = save_xir;
+ save_car = cy_readb(base_addr+(CyCAR<<index));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), save_xir);
- /* validate the port number (as configured and open) */
+ /* validate the port# (as configured and open) */
if( (i < 0) || (NR_PORTS <= i) ){
- base_addr[CySRER<<index] &= ~CyTxMpty;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) & ~CyTxMpty);
goto txend;
}
info = &cy_port[i];
info->last_active = jiffies;
if(info->tty == 0){
- base_addr[CySRER<<index] &= ~CyTxMpty;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) & ~CyTxMpty);
goto txdone;
}
- /* load the on-chip space available for outbound data */
+ /* load the on-chip space for outbound data */
char_count = info->xmit_fifo_size;
if(info->x_char) { /* send special char */
outch = info->x_char;
- base_addr[CyTDR<<index] = outch;
+ cy_writeb((u_long)base_addr+(CyTDR<<index), outch);
char_count--;
info->x_char = 0;
}
- if (info->x_break){
- /* The Cirrus chip requires the "Embedded Transmit
- Commands" of start break, delay, and end break
- sequences to be sent. The duration of the
- break is given in TICs, which runs at HZ
- (typically 100) and the PPR runs at 200 Hz,
- so the delay is duration * 200/HZ, and thus a
- break can run from 1/100 sec to about 5/4 sec.
- */
- base_addr[CyTDR<<index] = 0; /* start break */
- base_addr[CyTDR<<index] = 0x81;
- base_addr[CyTDR<<index] = 0; /* delay a bit */
- base_addr[CyTDR<<index] = 0x82;
- base_addr[CyTDR<<index] = info->x_break*200/HZ;
- base_addr[CyTDR<<index] = 0; /* terminate break */
- base_addr[CyTDR<<index] = 0x83;
- char_count -= 7;
- info->x_break = 0;
- }
+ if (info->x_break){
+ /* The Cirrus chip requires the "Embedded
+ Transmit Commands" of start break, delay,
+ and end break sequences to be sent. The
+ duration of the break is given in TICs,
+ which runs at HZ (typically 100) and the
+ PPR runs at 200 Hz, so the delay is
+ duration * 200/HZ, and thus a break can
+ run from 1/100 sec to about 5/4 sec.
+ For CD1400 J or later, replace the 200 Hz
+ by 500 Hz.
+ */
+ /* start break */
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0);
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0x81);
+ /* delay a bit */
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0);
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0x82);
+ if (info->chip_rev >= CD1400_REV_J ) {
+ /* It is a CD1400 rev. J or later */
+ cy_writeb((u_long)base_addr + (CyTDR<<index),
+ info->x_break*500/HZ);
+ } else {
+ cy_writeb((u_long)base_addr + (CyTDR<<index),
+ info->x_break*200/HZ);
+ }
+ /* finish break */
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0);
+ cy_writeb((u_long)base_addr + (CyTDR<<index), 0x83);
+ char_count -= 7;
+ info->x_break = 0;
+ }
while (char_count-- > 0){
- if (!info->xmit_cnt){
- base_addr[CySRER<<index] &= ~CyTxMpty;
+ if (!info->xmit_cnt){
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) &
+ ~CyTxMpty);
goto txdone;
- }
+ }
if (info->xmit_buf == 0){
- base_addr[CySRER<<index] &= ~CyTxMpty;
- goto txdone;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) &
+ ~CyTxMpty);
+ goto txdone;
}
if (info->tty->stopped || info->tty->hw_stopped){
- base_addr[CySRER<<index] &= ~CyTxMpty;
- goto txdone;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) &
+ ~CyTxMpty);
+ goto txdone;
}
- /* Because the Embedded Transmit Commands have been
- enabled, we must check to see if the escape
- character, NULL, is being sent. If it is, we
- must ensure that there is room for it to be
- doubled in the output stream. Therefore we
- no longer advance the pointer when the character
- is fetched, but rather wait until after the check
- for a NULL output character. (This is necessary
- because there may not be room for the two chars
- needed to send a NULL.
- */
+ /* Because the Embedded Transmit Commands have
+ been enabled, we must check to see if the
+ escape character, NULL, is being sent. If it
+ is, we must ensure that there is room for it
+ to be doubled in the output stream. Therefore
+ we no longer advance the pointer when the
+ character is fetched, but rather wait until
+ after the check for a NULL output character.
+ This is necessary because there may not be
+ room for the two chars needed to send a NULL.)
+ */
outch = info->xmit_buf[info->xmit_tail];
if( outch ){
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (PAGE_SIZE - 1);
- base_addr[CyTDR<<index] = outch;
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
+ cy_writeb((u_long)base_addr+(CyTDR<<index), outch);
}else{
if(char_count > 1){
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (PAGE_SIZE - 1);
- base_addr[CyTDR<<index] = outch;
- base_addr[CyTDR<<index] = 0;
- char_count--;
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
+ cy_writeb((u_long)base_addr+(CyTDR<<index),
+ outch);
+ cy_writeb((u_long)base_addr+(CyTDR<<index), 0);
+ char_count--;
}else{
}
}
@@ -929,52 +1492,64 @@
if (info->xmit_cnt < WAKEUP_CHARS) {
cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
}
-
txend:
/* end of service */
- base_addr[CyTIR<<index] = (save_xir & 0x3f);
- base_addr[CyCAR<<index] = (save_car);
+ cy_writeb((u_long)base_addr+(CyTIR<<index),
+ (save_xir & 0x3f));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (save_car));
}
if (status & CySRModem) { /* modem interrupt */
- /* determine the channel and change to that context */
- save_xir = (u_char) base_addr[CyMIR<<index];
+ /* determine the channel & change to that context */
+ save_xir = (u_char) cy_readb(base_addr+(CyMIR<<index));
channel = (u_short ) (save_xir & CyIRChannel);
- info = &cy_port[channel + chip * 4 + cinfo->first_line];
+ info = &cy_port[channel + chip * 4
+ + cinfo->first_line];
info->last_active = jiffies;
- save_car = base_addr[CyCAR<<index];
- base_addr[CyCAR<<index] = save_xir;
+ save_car = cy_readb(base_addr+(CyCAR<<index));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), save_xir);
- mdm_change = base_addr[CyMISR<<index];
- mdm_status = base_addr[CyMSVR1<<index];
+ mdm_change = cy_readb(base_addr+(CyMISR<<index));
+ mdm_status = cy_readb(base_addr+(CyMSVR1<<index));
- if(info->tty == 0){ /* nowhere to put the data, ignore it */
+ if(info->tty == 0){/* no place for data, ignore it*/
;
}else{
if((mdm_change & CyDCD)
&& (info->flags & ASYNC_CHECK_CD)){
if(mdm_status & CyDCD){
- cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP);
- }else if(!((info->flags & ASYNC_CALLOUT_ACTIVE)
- &&(info->flags & ASYNC_CALLOUT_NOHUP))){
- cy_sched_event(info, Cy_EVENT_HANGUP);
+ cy_sched_event(info,
+ Cy_EVENT_OPEN_WAKEUP);
+ }else if(!((info->flags
+ & ASYNC_CALLOUT_ACTIVE)
+ &&(info->flags
+ & ASYNC_CALLOUT_NOHUP))){
+ cy_sched_event(info,
+ Cy_EVENT_HANGUP);
}
}
if((mdm_change & CyCTS)
&& (info->flags & ASYNC_CTS_FLOW)){
if(info->tty->hw_stopped){
if(mdm_status & CyCTS){
- /* !!! cy_start isn't used because... */
+ /* cy_start isn't used
+ because... !!! */
info->tty->hw_stopped = 0;
- base_addr[CySRER<<index] |= CyTxMpty;
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) |
+ CyTxMpty);
+ cy_sched_event(info,
+ Cy_EVENT_WRITE_WAKEUP);
}
}else{
if(!(mdm_status & CyCTS)){
- /* !!! cy_stop isn't used because... */
+ /* cy_stop isn't used
+ because ... !!! */
info->tty->hw_stopped = 1;
- base_addr[CySRER<<index] &= ~CyTxMpty;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) &
+ ~CyTxMpty);
}
}
}
@@ -984,225 +1559,426 @@
}
}
/* end of service */
- base_addr[CyMIR<<index] = (save_xir & 0x3f);
- base_addr[CyCAR<<index] = save_car;
+ cy_writeb((u_long)base_addr+(CyMIR<<index),
+ (save_xir & 0x3f));
+ cy_writeb((u_long)base_addr+(CyCAR<<index), save_car);
}
} /* end while status != 0 */
} /* end loop for chips... */
} while(had_work);
/* clear interrupts */
- *(card_base_addr + (Cy_ClrIntr<<index)) = 0; /* Cy_ClrIntr is 0x1800 */
+ cy_writeb((u_long)card_base_addr + (Cy_ClrIntr<<index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+} /* cyy_interrupt */
+
+/***********************************************************/
+/********* End of block of Cyclom-Y specific code **********/
+/******** Start of block of Cyclades-Z specific code *********/
+/***********************************************************/
-} /* cy_interrupt */
-
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * cy_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using cy_sched_event(), and they get done here.
- *
- * This is done through one level of indirection--the task queue.
- * When a hardware interrupt service routine wants service by the
- * driver's bottom half, it enqueues the appropriate tq_struct (one
- * per port) to the tq_cyclades work queue and sets a request flag
- * via mark_bh for processing that queue. When the time is right,
- * do_cyclades_bh is called (because of the mark_bh) and it requests
- * that the work queue be processed.
- *
- * Although this may seem unwieldy, it gives the system a way to
- * pass an argument (in this case the pointer to the cyclades_port
- * structure) to the bottom half of the driver. Previous kernels
- * had to poll every port to see if that port needed servicing.
- */
-static void
-do_cyclades_bh(void)
-{
- run_task_queue(&tq_cyclades);
-} /* do_cyclades_bh */
-static void
-do_softint(void *private_)
+static int
+cyz_fetch_msg( struct cyclades_card *cinfo,
+ uclong *channel, ucchar *cmd, uclong *param)
{
- struct cyclades_port *info = (struct cyclades_port *) private_;
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-
- if (clear_bit(Cy_EVENT_HANGUP, &info->event)) {
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|
- ASYNC_CALLOUT_ACTIVE);
- }
- if (clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->open_wait);
- }
- if (clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
- if((tty->flags & (1<< TTY_DO_WRITE_WAKEUP))
- && tty->ldisc.write_wakeup){
- (tty->ldisc.write_wakeup)(tty);
- }
- wake_up_interruptible(&tty->write_wait);
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ unsigned long loc_doorbell;
+
+ firm_id = (struct FIRM_ID *)(cinfo->base_addr + ID_ADDRESS);
+ if (!ISZLOADED(*cinfo)){
+ return (-1);
+ }
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cinfo->base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+
+ loc_doorbell = cy_readl(&((struct RUNTIME_9060 *)
+ (cinfo->ctl_addr))->loc_doorbell);
+ if (loc_doorbell){
+ *cmd = (char)(0xff & loc_doorbell);
+ *channel = cy_readl(&board_ctrl->fwcmd_channel);
+ *param = (uclong)cy_readl(&board_ctrl->fwcmd_param);
+ cy_writel(&((struct RUNTIME_9060 *)(cinfo->ctl_addr))->loc_doorbell,
+ 0xffffffff);
+ return 1;
}
-} /* do_softint */
+ return 0;
+} /* cyz_fetch_msg */
-/*
- * Grab all interrupts in preparation for doing an automatic irq
- * detection. dontgrab is a mask of irq's _not_ to grab. Returns a
- * mask of irq's which were grabbed and should therefore be freed
- * using free_all_interrupts().
- */
static int
-grab_all_interrupts(int dontgrab)
+cyz_issue_cmd( struct cyclades_card *cinfo,
+ uclong channel, ucchar cmd, uclong param)
{
- int irq_lines = 0;
- int i, mask;
-
- for (i = 0, mask = 1; i < 16; i++, mask <<= 1) {
- if (!(mask & dontgrab)
- && !request_irq(i, cy_probe, SA_INTERRUPT, "serial probe", NULL)) {
- irq_lines |= mask;
- }
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ volatile uclong *pci_doorbell;
+ int index;
+
+ firm_id = (struct FIRM_ID *)(cinfo->base_addr + ID_ADDRESS);
+ if (!ISZLOADED(*cinfo)){
+ return (-1);
+ }
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cinfo->base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+
+ index = 0;
+ pci_doorbell = (uclong *)(&((struct RUNTIME_9060 *)
+ (cinfo->ctl_addr))->pci_doorbell);
+ while( (cy_readl(pci_doorbell) & 0xff) != 0){
+ if (index++ == 1000){
+ return(-1);
+ }
+ udelay(50L);
}
- return irq_lines;
-} /* grab_all_interrupts */
+ cy_writel((u_long)&board_ctrl->hcmd_channel, channel);
+ cy_writel((u_long)&board_ctrl->hcmd_param , param);
+ cy_writel((u_long)pci_doorbell, (long)cmd);
+
+ return(0);
+} /* cyz_issue_cmd */
+
+
+#if 0
+static int
+cyz_update_channel( struct cyclades_card *cinfo,
+ u_long channel, u_char mode, u_char cmd)
+{
+ struct FIRM_ID *firm_id =
+ (struct FIRM_ID *)(cinfo->base_addr + ID_ADDRESS);
+ struct ZFW_CTRL *zfw_ctrl;
+ struct CH_CTRL *ch_ctrl;
+
+ if (!ISZLOADED(*cinfo)){
+ return (-1);
+ }
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cinfo->base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ cy_writel(&ch_ctrl[channel].op_mode, (uclong)mode);
+
+ return cyz_issue_cmd(cinfo, channel, cmd, 0L);
+
+} /* cyz_update_channel */
+#endif
+
-/*
- * Release all interrupts grabbed by grab_all_interrupts
- */
static void
-free_all_interrupts(int irq_lines)
+cyz_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- int i;
-
- for (i = 0; i < 16; i++) {
- if (irq_lines & (1 << i))
- free_irq(i,NULL);
- }
-} /* free_all_interrupts */
+} /* cyz_interrupt */
-/*
- * This routine returns a bitfield of "wild interrupts". Basically,
- * any unclaimed interrupts which is flapping around.
- */
-static int
-check_wild_interrupts(void)
+
+static void
+cyz_poll(unsigned long arg)
{
- int i, mask;
- int wild_interrupts = 0;
- int irq_lines;
- unsigned long timeout;
- unsigned long flags;
-
- /*Turn on interrupts (they may be off) */
- save_flags(flags); sti();
+ static volatile struct FIRM_ID *firm_id;
+ static volatile struct ZFW_CTRL *zfw_ctrl;
+ static volatile struct BOARD_CTRL *board_ctrl;
+ static volatile struct CH_CTRL *ch_ctrl;
+ static volatile struct BUF_CTRL *buf_ctrl;
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info;
+ struct tty_struct *tty;
+ int card, port;
+ int char_count;
+#ifdef BLOCKMOVE
+ int small_count;
+#endif
+ char data;
+ uclong channel;
+ ucchar cmd;
+ uclong param;
+ uclong hw_ver, fw_ver;
+ volatile uclong tx_put, tx_get, tx_bufsize;
+ volatile uclong rx_put, rx_get, rx_bufsize;
+
+ cyz_timerlist.expires = jiffies + (HZ);
+ for (card = 0 ; card < NR_CARDS ; card++){
+ cinfo = &cy_card[card];
+ if (!IS_CYC_Z(*cinfo)) continue;
+
+
+ firm_id = (struct FIRM_ID *)(cinfo->base_addr + ID_ADDRESS);
+ if (!ISZLOADED(*cinfo)) {
+ cinfo->inact_ctrl = 0;
+ continue;
+ }
- irq_lines = grab_all_interrupts(0);
-
- /*
- * Delay for 0.1 seconds -- we use a busy loop since this may
- * occur during the bootup sequence
- */
- timeout = jiffies+10;
- while (timeout >= jiffies)
- ;
-
- cy_triggered = 0; /* Reset after letting things settle */
-
- timeout = jiffies+10;
- while (timeout >= jiffies)
- ;
-
- for (i = 0, mask = 1; i < 16; i++, mask <<= 1) {
- if ((cy_triggered & (1 << i)) &&
- (irq_lines & (1 << i))) {
- wild_interrupts |= mask;
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cinfo->base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &(zfw_ctrl->board_ctrl);
+ fw_ver = cy_readl(&board_ctrl->fw_version);
+ hw_ver = cy_readl(&((struct RUNTIME_9060 *)
+ (cinfo->ctl_addr))->mail_box_0);
+
+ /* Enables the firmware inactivity control */
+ if ((fw_ver > 0x00000310L) && (!cinfo->inact_ctrl)) {
+ param = cyz_issue_cmd( &cy_card[card], 0L, C_CM_TINACT, 0L);
+ cinfo->inact_ctrl = 1;
+ }
+
+ while(cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1){
+ char_count = 0;
+ info = &cy_port[ channel + cinfo->first_line ];
+ if((tty = info->tty) == 0) continue;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
+ info->jiffies[0] = jiffies;
+
+ switch(cmd){
+ case C_CM_PR_ERROR:
+ tty->flip.count++;
+ *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ *tty->flip.char_buf_ptr++ = 0;
+ char_count++;
+ break;
+ case C_CM_FR_ERROR:
+ tty->flip.count++;
+ *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ *tty->flip.char_buf_ptr++ = 0;
+ char_count++;
+ break;
+ case C_CM_RXBRK:
+ tty->flip.count++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ *tty->flip.char_buf_ptr++ = 0;
+ char_count++;
+ break;
+ case C_CM_MDCD:
+ if (info->flags & ASYNC_CHECK_CD){
+ if ((fw_ver > 241 ?
+ ((u_long)param) :
+ cy_readl(&ch_ctrl[channel].rs_status)) & C_RS_DCD) {
+ /* SP("Open Wakeup\n"); */
+ cy_sched_event(info,
+ Cy_EVENT_OPEN_WAKEUP);
+ }else if(!((info->flags
+ & ASYNC_CALLOUT_ACTIVE)
+ &&(info->flags
+ & ASYNC_CALLOUT_NOHUP))){
+ /* SP("Hangup\n"); */
+ cy_sched_event(info,
+ Cy_EVENT_HANGUP);
+ }
+ }
+ break;
+ case C_CM_MCTS:
+ if (info->flags & ASYNC_CTS_FLOW) {
+ if(info->tty->hw_stopped){
+ if( cy_readl(&ch_ctrl[channel].rs_status) & C_RS_DCD){
+ /* cy_start isn't used because...
+ HW flow is handled by the board */
+ /* SP("Write Wakeup\n"); */
+ cy_sched_event(info,
+ Cy_EVENT_WRITE_WAKEUP);
+ }
+ }else{
+ if(!(cy_readl(&ch_ctrl[channel].rs_status) & C_RS_CTS)){
+ /* cy_stop isn't used because
+ HW flow is handled by the board */
+ /* SP("Write stop\n"); */
+ }
+ }
+ }
+ break;
+ case C_CM_MRI:
+ break;
+ case C_CM_MDSR:
+ break;
+#ifdef Z_WAKE
+ case C_CM_IOCTLW:
+ cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP);
+ break;
+#endif
+ case C_CM_FATAL:
+ /* should do something with this !!! */
+ break;
+ }
+ if(char_count){
+ queue_task(&tty->flip.tqueue, &tq_timer);
}
}
- free_all_interrupts(irq_lines);
- restore_flags(flags);
- return wild_interrupts;
-} /* check_wild_interrupts */
+ for (port = 0; port < cy_readl(&board_ctrl->n_channel); port++){
+ info = &cy_port[ port + cinfo->first_line ];
+ tty = info->tty;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
+
+/* Removed due to compilation problems in Alpha systems */
+// if ((char_count = CHARS_IN_BUF(buf_ctrl))){
+
+ rx_get = cy_readl(&buf_ctrl->rx_get);
+ rx_put = cy_readl(&buf_ctrl->rx_put);
+ rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize);
+ if (rx_put >= rx_get)
+ char_count = rx_put - rx_get;
+ else
+ char_count = rx_put - rx_get + rx_bufsize;
+
+ if ( char_count ){
+
+ info->last_active = jiffies;
+ info->jiffies[1] = jiffies;
+
+#ifdef CY_ENABLE_MONITORING
+ info->mon.int_count++;
+ info->mon.char_count += char_count;
+ if (char_count > info->mon.char_max)
+ info->mon.char_max = char_count;
+ info->mon.char_last = char_count;
+#endif
+ info->idle_stats.recv_bytes += char_count;
+ info->idle_stats.recv_idle = jiffies;
+ if( tty == 0){
+ /* flush received characters */
+ rx_get = (rx_get + char_count) & (rx_bufsize - 1);
+ /* SP("-"); */
+ info->rflush_count++;
+ }else{
+#ifdef BLOCKMOVE
+ /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
+ for performance, but because of buffer boundaries, there
+ may be several steps to the operation */
+ while(0 < (small_count
+ = cy_min((rx_bufsize - rx_get),
+ cy_min((TTY_FLIPBUF_SIZE - tty->flip.count),
+ char_count)))){
+
+ memcpy_fromio(tty->flip.char_buf_ptr,
+ (char *)(cinfo->base_addr
+ + cy_readl(&buf_ctrl->rx_bufaddr)
+ + rx_get),
+ small_count);
+
+ tty->flip.char_buf_ptr += small_count;
+ memset(tty->flip.flag_buf_ptr,
+ TTY_NORMAL,
+ small_count);
+ tty->flip.flag_buf_ptr += small_count;
+ rx_get = (rx_get + small_count) & (rx_bufsize - 1);
+ char_count -= small_count;
+ tty->flip.count += small_count;
+ }
+#else
+ while(char_count--){
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE){
+ break;
+ }
+ data = cy_readb(cinfo->base_addr +
+ cy_readl(&buf_ctrl->rx_bufaddr) + rx_get);
+ rx_get = (rx_get + 1) & (rx_bufsize - 1);
+ tty->flip.count++;
+ *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+ *tty->flip.char_buf_ptr++ = data;
+ }
+#endif
+ queue_task(&tty->flip.tqueue, &tq_timer);
+ }
+ /* Update rx_get */
+ cy_writel(&buf_ctrl->rx_get, rx_get);
+ }
-/*
- * This routine is called by do_auto_irq(); it attempts to determine
- * which interrupt a serial port is configured to use. It is not
- * fool-proof, but it works a large part of the time.
- */
-static int
-get_auto_irq(unsigned char *address)
-{
- unsigned long timeout;
- unsigned char *base_addr;
- int index;
+/* Removed due to compilation problems in Alpha systems */
+// if ((char_count = SPACE_IN_BUF(buf_ctrl))){
- index = 0; /* IRQ probing is only for ISA */
- base_addr = address;
- intr_base_addr = address;
-
- /*
- * Enable interrupts and see who answers
- */
- cy_irq_triggered = 0;
- cli();
- base_addr[CyCAR<<index] = 0;
- write_cy_cmd(base_addr,CyCHAN_CTL|CyENB_XMTR,index);
- base_addr[CySRER<<index] |= CyTxMpty;
- probe_ready = 1;
- sti();
-
- timeout = jiffies+2;
- while (timeout >= jiffies) {
- if (cy_irq_triggered)
- break;
- }
- probe_ready = 0;
- return(cy_irq_triggered);
-} /* get_auto_irq */
+ tx_get = cy_readl(&buf_ctrl->tx_get);
+ tx_put = cy_readl(&buf_ctrl->tx_put);
+ tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
+ if (tx_put >= tx_get)
+ char_count = tx_get - tx_put - 1 + tx_bufsize;
+ else
+ char_count = tx_get - tx_put - 1;
-/*
- * Calls get_auto_irq() multiple times, to make sure we don't get
- * faked out by random interrupts
- */
-static int
-do_auto_irq(unsigned char *address)
-{
- int irq_lines = 0;
- int irq_try_1 = 0, irq_try_2 = 0;
- int retries;
- unsigned long flags;
+ if ( char_count ){
- /* Turn on interrupts (they may be off) */
- save_flags(flags); sti();
+ if( tty == 0 ){
+ goto ztxdone;
+ }
- probe_ready = 0;
+ if(info->x_char) { /* send special char */
+ data = info->x_char;
- cy_wild_int_mask = check_wild_interrupts();
+ cy_writeb((cinfo->base_addr +
+ cy_readl(&buf_ctrl->tx_bufaddr) + tx_put), data);
+ tx_put = (tx_put + 1) & (tx_bufsize - 1);
+ info->x_char = 0;
+ char_count--;
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
+ if (info->x_break){
+ printk("cyc cyz_poll shouldn't see x_break\n");
+ info->x_break = 0;
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
+#ifdef BLOCKMOVE
+ while(0 < (small_count
+ = cy_min((tx_bufsize - tx_put),
+ cy_min ((SERIAL_XMIT_SIZE - info->xmit_tail),
+ cy_min(info->xmit_cnt, char_count))))){
+
+ memcpy_toio((char *)(cinfo->base_addr
+ + cy_readl(&buf_ctrl->tx_bufaddr) + tx_put),
+ &info->xmit_buf[info->xmit_tail],
+ small_count);
+
+ tx_put = (tx_put + small_count) & (tx_bufsize - 1);
+ char_count -= small_count;
+ info->xmit_cnt -= small_count;
+ info->xmit_tail =
+ (info->xmit_tail + small_count) & (SERIAL_XMIT_SIZE - 1);
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
+#else
+ while (info->xmit_cnt && char_count){
+ data = info->xmit_buf[info->xmit_tail];
+ info->xmit_cnt--;
+ info->xmit_tail =
+ (info->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
+
+ cy_writeb(cinfo->base_addr +
+ cy_readl(&buf_ctrl->tx_bufaddr) + tx_put,
+ data);
+ tx_put = (tx_put + 1) & (tx_bufsize - 1);
+ char_count--;
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
- irq_lines = grab_all_interrupts(cy_wild_int_mask);
-
- for (retries = 0; retries < 5; retries++) {
- if (!irq_try_1)
- irq_try_1 = get_auto_irq(address);
- if (!irq_try_2)
- irq_try_2 = get_auto_irq(address);
- if (irq_try_1 && irq_try_2) {
- if (irq_try_1 == irq_try_2)
- break;
- irq_try_1 = irq_try_2 = 0;
+#endif
+ ztxdone:
+ if (info->xmit_cnt < WAKEUP_CHARS) {
+ cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
+ }
+ /* Update tx_put */
+ cy_writel(&buf_ctrl->tx_put, tx_put);
}
}
- restore_flags(flags);
- free_all_interrupts(irq_lines);
- return (irq_try_1 == irq_try_2) ? irq_try_1 : 0;
-} /* do_auto_irq */
+ /* poll every 40 ms */
+ cyz_timerlist.expires = jiffies + cyz_polling_cycle;
+
+ /* refresh inactivity counter */
+ if (cinfo->inact_ctrl) {
+ cy_writel(&board_ctrl->inactivity, (uclong) ZF_TINACT);
+ }
+ }
+ add_timer(&cyz_timerlist);
+
+ return;
+} /* cyz_poll */
+
+
+/********** End of block of Cyclades-Z specific code *********/
+/***********************************************************/
/* This is called whenever a port becomes active;
@@ -1216,72 +1992,144 @@
int card,chip,channel,index;
if (info->flags & ASYNC_INITIALIZED){
- return 0;
+ return 0;
}
if (!info->type){
- if (info->tty){
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- return 0;
+ if (info->tty){
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ return 0;
}
if (!info->xmit_buf){
- info->xmit_buf = (unsigned char *) get_free_page (GFP_KERNEL);
- if (!info->xmit_buf){
- return -ENOMEM;
- }
+ info->xmit_buf = (unsigned char *) get_free_page (GFP_KERNEL);
+ if (!info->xmit_buf){
+ return -ENOMEM;
+ }
}
- config_setup(info);
+ set_line_char(info);
card = info->card;
channel = (info->line) - (cy_card[card].first_line);
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
(cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
-#ifdef SERIAL_DEBUG_OPEN
- printk("startup card %d, chip %d, channel %d, base_addr %lx",
- card, chip, channel, (long)base_addr);/**/
+#ifdef CY_DEBUG_OPEN
+ printk("cyc startup card %d, chip %d, channel %d, base_addr %lx\n",
+ card, chip, channel, (long)base_addr);/**/
#endif
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
+ save_flags(flags); cli();
+ cy_writeb((ulong)base_addr+(CyCAR<<index), (u_char)channel);
- base_addr[CyRTPR<<index] = (info->default_timeout
- ? info->default_timeout
- : 0x02); /* 10ms rx timeout */
+ cy_writeb((ulong)base_addr+(CyRTPR<<index), (info->default_timeout
+ ? info->default_timeout
+ : 0x02)); /* 10ms rx timeout */
- write_cy_cmd(base_addr,CyCHAN_CTL|CyENB_RCVR|CyENB_XMTR,index);
+ cyy_issue_cmd(base_addr,CyCHAN_CTL|CyENB_RCVR|CyENB_XMTR,index);
- base_addr[CyCAR<<index] = (u_char)channel; /* !!! Is this needed? */
- base_addr[CyMSVR1<<index] = CyRTS;
- base_addr[CyMSVR2<<index] = CyDTR;
+ cy_writeb((ulong)base_addr+(CyCAR<<index), (u_char)channel);
+ cy_writeb((ulong)base_addr+(CyMSVR1<<index), CyRTS);
+ cy_writeb((ulong)base_addr+(CyMSVR2<<index), CyDTR);
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:startup raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
#endif
- base_addr[CySRER<<index] |= CyRxData;
- info->flags |= ASYNC_INITIALIZED;
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyRxData);
+ info->flags |= ASYNC_INITIALIZED;
+
+ if (info->tty){
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+ info->idle_stats.in_use =
+ info->idle_stats.recv_idle =
+ info->idle_stats.xmit_idle = jiffies;
+ restore_flags(flags);
+ } else {
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
+ int retval;
+
+ base_addr = (unsigned char*) (cy_card[card].base_addr);
+
+ firm_id = (struct FIRM_ID *) (base_addr + ID_ADDRESS);
+ if (!ISZLOADED(cy_card[card])){
+ return -ENODEV;
+ }
+
+ zfw_ctrl =
+ (struct ZFW_CTRL *)
+ (cy_card[card].base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+#ifdef CY_DEBUG_OPEN
+ printk("cyc startup Z card %d, channel %d, base_addr %lx\n",
+ card, channel, (long)base_addr);/**/
+#endif
+
+ cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+#ifdef Z_WAKE
+ cy_writel(&ch_ctrl[channel].intr_enable,
+ C_IN_MDCD|C_IN_MCTS|C_IN_IOCTLW);
+#else
+ cy_writel(&ch_ctrl[channel].intr_enable,
+ C_IN_MDCD|C_IN_MCTS);
+#endif
+ retval = cyz_issue_cmd( &cy_card[card],
+ channel, C_CM_IOCTL, 0L); /* was C_CM_RESET */
+ if (retval != 0){
+ printk("cyc:startup(1) retval was %x\n", retval);
+ }
+
+ /* set timeout !!! */
+ /* set RTS and DTR !!! */
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | C_RS_DTR) ;
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM, 0L);
+ if (retval != 0){
+ printk("cyc:startup(2) retval was %x\n", retval);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:startup raising Z DTR\n");
+#endif
+ /* enable send, recv, modem !!! */
+
+ info->flags |= ASYNC_INITIALIZED;
if (info->tty){
clear_bit(TTY_IO_ERROR, &info->tty->flags);
}
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+ info->idle_stats.in_use =
+ info->idle_stats.recv_idle =
+ info->idle_stats.xmit_idle = jiffies;
+ }
- restore_flags(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk(" done\n");
+#ifdef CY_DEBUG_OPEN
+ printk(" cyc startup done\n");
#endif
- return 0;
+ return 0;
} /* startup */
-void
+
+static void
start_xmit( struct cyclades_port *info )
{
unsigned long flags;
@@ -1290,18 +2138,25 @@
card = info->card;
channel = (info->line) - (cy_card[card].first_line);
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = channel;
- base_addr[CySRER<<index] |= CyTxMpty;
- restore_flags(flags);
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), channel);
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyTxMpty);
+ restore_flags(flags);
+ } else {
+ /* Don't have to do anything at this time */
+ }
} /* start_xmit */
+
/*
* This routine shuts down a serial port; interrupts are disabled,
* and DTR is dropped if the hangup on close termio flag is on.
@@ -1314,326 +2169,661 @@
int card,chip,channel,index;
if (!(info->flags & ASYNC_INITIALIZED)){
- return;
+ return;
}
card = info->card;
channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
-#ifdef SERIAL_DEBUG_OPEN
- printk("shutdown card %d, chip %d, channel %d, base_addr %lx\n",
- card, chip, channel, (long)base_addr);
+#ifdef CY_DEBUG_OPEN
+ printk("cyc shutdown Y card %d, chip %d, channel %d, base_addr %lx\n",
+ card, chip, channel, (long)base_addr);
#endif
- /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE
- SENT BEFORE DROPPING THE LINE !!! (Perhaps
- set some flag that is read when XMTY happens.)
- Other choices are to delay some fixed interval
- or schedule some later processing.
- */
- save_flags(flags); cli();
- if (info->xmit_buf){
- unsigned char * temp;
- temp = info->xmit_buf;
- info->xmit_buf = 0;
- free_page((unsigned long) temp);
- }
-
- base_addr[CyCAR<<index] = (u_char)channel;
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
- base_addr[CyMSVR1<<index] = ~CyRTS;
- base_addr[CyMSVR2<<index] = ~CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
-#endif
- }
- write_cy_cmd(base_addr,CyCHAN_CTL|CyDIS_RCVR,index);
- /* it may be appropriate to clear _XMIT at
- some later date (after testing)!!! */
+ save_flags(flags); cli();
- if (info->tty){
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->xmit_buf){
+ unsigned char * temp;
+ temp = info->xmit_buf;
+ info->xmit_buf = 0;
+ free_page((unsigned long) temp);
+ }
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc shutdown dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
+#endif
+ }
+ cyy_issue_cmd(base_addr,CyCHAN_CTL|CyDIS_RCVR,index);
+ /* it may be appropriate to clear _XMIT at
+ some later date (after testing)!!! */
+
+ if (info->tty){
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->flags &= ~ASYNC_INITIALIZED;
+ restore_flags(flags);
+ } else {
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
+ int retval;
+
+ base_addr = (unsigned char*) (cy_card[card].base_addr);
+#ifdef CY_DEBUG_OPEN
+ printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n",
+ card, channel, (long)base_addr);
+#endif
+
+ firm_id = (struct FIRM_ID *) (base_addr + ID_ADDRESS);
+ if (!ISZLOADED(cy_card[card])) {
+ return;
}
- info->flags &= ~ASYNC_INITIALIZED;
- restore_flags(flags);
-#ifdef SERIAL_DEBUG_OPEN
- printk(" done\n");
+ zfw_ctrl =
+ (struct ZFW_CTRL *)
+ (cy_card[card].base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &(zfw_ctrl->board_ctrl);
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ save_flags(flags); cli();
+
+ if (info->xmit_buf){
+ unsigned char * temp;
+ temp = info->xmit_buf;
+ info->xmit_buf = 0;
+ free_page((unsigned long) temp);
+ }
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ cy_writel((u_long)&ch_ctrl[channel].rs_control,
+ (uclong)(cy_readl(&ch_ctrl[channel].rs_control) &
+ ~(C_RS_RTS | C_RS_DTR)));
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM, 0L);
+ if (retval != 0){
+ printk("cyc:shutdown retval (2) was %x\n", retval);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:shutdown dropping Z DTR\n");
+#endif
+ }
+
+ if (info->tty){
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->flags &= ~ASYNC_INITIALIZED;
+
+ restore_flags(flags);
+ }
+
+#ifdef CY_DEBUG_OPEN
+ printk(" cyc shutdown done\n");
#endif
return;
} /* shutdown */
+
/*
- * This routine finds or computes the various line characteristics.
+ * ------------------------------------------------------------
+ * cy_open() and friends
+ * ------------------------------------------------------------
*/
-static void
-config_setup(struct cyclades_port * info)
+
+static int
+block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct cyclades_port *info)
{
+ struct wait_queue wait = { current, NULL };
+ struct cyclades_card *cinfo;
unsigned long flags;
- unsigned char *base_addr;
- int card,chip,channel,index;
- unsigned cflag;
- int i;
-
- if (!info->tty || !info->tty->termios){
- return;
- }
- if (info->line == -1){
- return;
- }
- cflag = info->tty->termios->c_cflag;
+ int chip, channel,index;
+ int retval;
+ char *base_addr;
- /* baud rate */
- i = cflag & CBAUD;
-#ifdef CBAUDEX
-/* Starting with kernel 1.1.65, there is direct support for
- higher baud rates. The following code supports those
- changes. The conditional aspect allows this driver to be
- used for earlier as well as later kernel versions. (The
- mapping is slightly different from serial.c because there
- is still the possibility of supporting 75 kbit/sec with
- the Cyclades board.)
- */
- if (i & CBAUDEX) {
- if (i == B57600)
- i = 16;
- else if(i == B115200)
- i = 18;
-#ifdef B78600
- else if(i == B78600)
- i = 17;
-#endif
- else
- info->tty->termios->c_cflag &= ~CBAUDEX;
- }
-#endif
- if (i == 15) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- i += 1;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- i += 3;
- }
- info->tbpr = baud_bpr[i]; /* Tx BPR */
- info->tco = baud_co[i]; /* Tx CO */
- info->rbpr = baud_bpr[i]; /* Rx BPR */
- info->rco = baud_co[i]; /* Rx CO */
- if (baud_table[i] == 134) {
- info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
- /* get it right for 134.5 baud */
- } else if (baud_table[i]) {
- info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2;
- /* this needs to be propagated into the card info */
- } else {
- info->timeout = 0;
- }
- /* By tradition (is it a standard?) a baud rate of zero
- implies the line should be/has been closed. A bit
- later in this routine such a test is performed. */
-
- /* byte size and parity */
- info->cor5 = 0;
- info->cor4 = 0;
- info->cor3 = (info->default_threshold
- ? info->default_threshold
- : baud_cor3[i]); /* receive threshold */
- info->cor2 = CyETC;
- switch(cflag & CSIZE){
- case CS5:
- info->cor1 = Cy_5_BITS;
- break;
- case CS6:
- info->cor1 = Cy_6_BITS;
- break;
- case CS7:
- info->cor1 = Cy_7_BITS;
- break;
- case CS8:
- info->cor1 = Cy_8_BITS;
- break;
- }
- if(cflag & CSTOPB){
- info->cor1 |= Cy_2_STOP;
- }
- if (cflag & PARENB){
- if (cflag & PARODD){
- info->cor1 |= CyPARITY_O;
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&info->close_wait);
+ }
+ if (info->flags & ASYNC_HUP_NOTIFY){
+ return -EAGAIN;
}else{
- info->cor1 |= CyPARITY_E;
+ return -ERESTARTSYS;
}
- }else{
- info->cor1 |= CyPARITY_NONE;
}
-
- /* CTS flow control flag */
- if (cflag & CRTSCTS){
- info->flags |= ASYNC_CTS_FLOW;
- info->cor2 |= CyCtsAE;
- }else{
- info->flags &= ~ASYNC_CTS_FLOW;
- info->cor2 &= ~CyCtsAE;
+
+ /*
+ * If this is a callout device, then just make sure the normal
+ * device isn't being used.
+ */
+ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
+ if (info->flags & ASYNC_NORMAL_ACTIVE){
+ return -EBUSY;
+ }
+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (info->flags & ASYNC_SESSION_LOCKOUT) &&
+ (info->session != current->session)){
+ return -EBUSY;
+ }
+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
+ (info->flags & ASYNC_PGRP_LOCKOUT) &&
+ (info->pgrp != current->pgrp)){
+ return -EBUSY;
+ }
+ info->flags |= ASYNC_CALLOUT_ACTIVE;
+ return 0;
}
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- /***********************************************
- The hardware option, CyRtsAO, presents RTS when
- the chip has characters to send. Since most modems
- use RTS as reverse (inbound) flow control, this
- option is not used. If inbound flow control is
- necessary, DTR can be programmed to provide the
- appropriate signals for use with a non-standard
- cable. Contact Marcio Saito for details.
- ***********************************************/
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ /*
+ * If non-blocking mode is set, then make the check up front
+ * and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ if (info->flags & ASYNC_CALLOUT_ACTIVE){
+ return -EBUSY;
+ }
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * cy_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+#ifdef CY_DEBUG_OPEN
+ printk("cyc block_til_ready before block: ttyC%d, count = %d\n",
+ info->line, info->count);/**/
+#endif
save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
+ if (!tty_hung_up_p(filp))
+ info->count--;
+ restore_flags(flags);
+#ifdef CY_DEBUG_COUNT
+ printk("cyc block_til_ready: (%d): decrementing count to %d\n",
+ current->pid, info->count);
+#endif
+ info->blocked_open++;
- /* tx and rx baud rate */
+ cinfo = &cy_card[info->card];
+ channel = info->line - cinfo->first_line;
+ if (!IS_CYC_Z(*cinfo)) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cinfo->bus_index;
+ base_addr = (char *)(cinfo->base_addr
+ + (cy_chip_offset[chip]<<index));
- base_addr[CyTCOR<<index] = info->tco;
- base_addr[CyTBPR<<index] = info->tbpr;
- base_addr[CyRCOR<<index] = info->rco;
- base_addr[CyRBPR<<index] = info->rbpr;
-
- /* set line characteristics according configuration */
-
- base_addr[CySCHR1<<index] = START_CHAR(info->tty);
- base_addr[CySCHR2<<index] = STOP_CHAR(info->tty);
- base_addr[CyCOR1<<index] = info->cor1;
- base_addr[CyCOR2<<index] = info->cor2;
- base_addr[CyCOR3<<index] = info->cor3;
- base_addr[CyCOR4<<index] = info->cor4;
- base_addr[CyCOR5<<index] = info->cor5;
-
- write_cy_cmd(base_addr,CyCOR_CHANGE|CyCOR1ch|CyCOR2ch|CyCOR3ch,index);
-
- base_addr[CyCAR<<index] = (u_char)channel; /* !!! Is this needed? */
-
- base_addr[CyRTPR<<index] = (info->default_timeout
- ? info->default_timeout
- : 0x02); /* 10ms rx timeout */
-
- if (C_CLOCAL(info->tty)) {
- base_addr[CySRER<<index] |= CyMdmCh; /* without modem intr */
- /* act on 1->0 modem transitions */
- base_addr[CyMCOR1<<index] = CyCTS;
- /* act on 0->1 modem transitions */
- base_addr[CyMCOR2<<index] = CyCTS;
- } else {
- base_addr[CySRER<<index] |= CyMdmCh; /* with modem intr */
- /* act on 1->0 modem transitions */
- base_addr[CyMCOR1<<index] = CyDSR|CyCTS|CyRI|CyDCD;
- /* act on 0->1 modem transitions */
- base_addr[CyMCOR2<<index] = CyDSR|CyCTS|CyRI|CyDCD;
+ while (1) {
+ save_flags(flags); cli();
+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE)){
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:block_til_ready raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
+#endif
+ }
+ restore_flags(flags);
+ current->state = TASK_INTERRUPTIBLE;
+ if (tty_hung_up_p(filp)
+ || !(info->flags & ASYNC_INITIALIZED) ){
+ if (info->flags & ASYNC_HUP_NOTIFY) {
+ retval = -EAGAIN;
+ }else{
+ retval = -ERESTARTSYS;
+ }
+ break;
+ }
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE)
+ && !(info->flags & ASYNC_CLOSING)
+ && (C_CLOCAL(tty)
+ || (cy_readb(base_addr+(CyMSVR1<<index)) & CyDCD))) {
+ restore_flags(flags);
+ break;
+ }
+ restore_flags(flags);
+ if (current->signal & ~current->blocked) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef CY_DEBUG_OPEN
+ printk("cyc block_til_ready blocking: ttyC%d, count = %d\n",
+ info->line, info->count);/**/
+#endif
+ schedule();
+ }
+ } else {
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
+ int retval;
+
+ base_addr = (char *)(cinfo->base_addr);
+ firm_id = (struct FIRM_ID *)
+ (base_addr + ID_ADDRESS);
+ if (!ISZLOADED(*cinfo)){
+ return -EINVAL;
}
- if(i == 0){ /* baud rate is zero, turn off line */
- base_addr[CyMSVR2<<index] = ~CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+ zfw_ctrl =
+ (struct ZFW_CTRL *)
+ (base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ while (1) {
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | C_RS_DTR);
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM, 0L);
+ if (retval != 0){
+ printk("cyc:block_til_ready retval was %x\n", retval);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:block_til_ready raising Z DTR\n");
#endif
- }else{
- base_addr[CyMSVR2<<index] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+
+ current->state = TASK_INTERRUPTIBLE;
+ if (tty_hung_up_p(filp)
+ || !(info->flags & ASYNC_INITIALIZED) ){
+ if (info->flags & ASYNC_HUP_NOTIFY) {
+ retval = -EAGAIN;
+ }else{
+ retval = -ERESTARTSYS;
+ }
+ break;
+ }
+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE)
+ && !(info->flags & ASYNC_CLOSING)
+ && (C_CLOCAL(tty)
+ || (cy_readl(&ch_ctrl[channel].rs_status) & C_RS_DCD))) {
+ break;
+ }
+ if (current->signal & ~current->blocked) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef CY_DEBUG_OPEN
+ printk("cyc block_til_ready blocking: ttyC%d, count = %d\n",
+ info->line, info->count);/**/
#endif
+ schedule();
}
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (!tty_hung_up_p(filp)){
+ info->count++;
+#ifdef CY_DEBUG_COUNT
+ printk("cyc:block_til_ready (%d): incrementing count to %d\n",
+ current->pid, info->count);
+#endif
+ }
+ info->blocked_open--;
+#ifdef CY_DEBUG_OPEN
+ printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n",
+ info->line, info->count);/**/
+#endif
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+} /* block_til_ready */
- if (info->tty){
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+/*
+ * This routine is called whenever a serial port is opened. It
+ * performs the serial-specific initialization for the tty structure.
+ */
+int
+cy_open(struct tty_struct *tty, struct file * filp)
+{
+ struct cyclades_port *info;
+ int retval, line;
+
+ line = MINOR(tty->device) - tty->driver.minor_start;
+ if ((line < 0) || (NR_PORTS <= line)){
+ return -ENODEV;
+ }
+ info = &cy_port[line];
+ if (info->line < 0){
+ return -ENODEV;
+ }
+
+ /* If the card's firmware hasn't been loaded,
+ treat it as absent from the system. This
+ will make the user pay attention.
+ */
+ if (IS_CYC_Z(cy_card[info->card])) {
+ if (!ISZLOADED(cy_card[info->card])) {
+ if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 *)
+ ((cy_card[info->card]).ctl_addr))->mail_box_0)) &&
+ Z_FPGA_CHECK(cy_card[info->card])) &&
+ (ZFIRM_HLT==cy_readl(&((struct FIRM_ID *)
+ ((cy_card[info->card]).base_addr+ID_ADDRESS))->signature)))
+ {
+ printk ("Cyclades-Z Error: you need an external power supply for this number of ports.\n\rFirmware halted.\r\n");
+ } else {
+ printk("Cyclades-Z firmware not yet loaded\n");
+ }
+ return -ENODEV;
}
+ }
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_open ttyC%d\n", info->line); /* */
+#endif
+ if (serial_paranoia_check(info, tty->device, "cy_open")){
+ return -ENODEV;
+ }
+#ifdef CY_DEBUG_OPEN
+ printk("cyc:cy_open ttyC%d, count = %d\n",
+ info->line, info->count);/**/
+#endif
+ info->count++;
+#ifdef CY_DEBUG_COUNT
+ printk("cyc:cy_open (%d): incrementing count to %d\n",
+ current->pid, info->count);
+#endif
+ tty->driver_data = info;
+ info->tty = tty;
- restore_flags(flags);
+ /* Some drivers have (incorrect/incomplete) code to test
+ against a race condition. Should add good code here!!! */
+ if (!tmp_buf) {
+ tmp_buf = (unsigned char *) get_free_page(GFP_KERNEL);
+ if (!tmp_buf){
+ return -ENOMEM;
+ }
+ }
+
+ if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+ if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
+ *tty->termios = info->normal_termios;
+ else
+ *tty->termios = info->callout_termios;
+ }
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval){
+ return retval;
+ }
-} /* config_setup */
+ MOD_INC_USE_COUNT;
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+#ifdef CY_DEBUG_OPEN
+ printk("cyc:cy_open returning after block_til_ready with %d\n",
+ retval);
+#endif
+ return retval;
+ }
-static void
-cy_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
+ info->session = current->session;
+ info->pgrp = current->pgrp;
-#ifdef SERIAL_DEBUG_IO
- printk("cy_put_char ttyC%d\n", info->line);
+#ifdef CY_DEBUG_OPEN
+ printk(" cyc:cy_open done\n");/**/
#endif
- if (serial_paranoia_check(info, tty->device, "cy_put_char"))
- return;
+ return 0;
+} /* cy_open */
- if (!tty || !info->xmit_buf)
+/*
+ * cy_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
+ unsigned char *base_addr;
+ int card,chip,channel,index;
+ unsigned long orig_jiffies, char_time;
+
+ if (serial_paranoia_check(info, tty->device, "cy_wait_until_sent"))
return;
- save_flags(flags); cli();
- if (info->xmit_cnt >= PAGE_SIZE - 1) {
- restore_flags(flags);
- return;
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout < 0)
+ timeout = 0;
+ if (timeout)
+ char_time = MIN(char_time, timeout);
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+ printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char *)
+ (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ while (cy_readb(base_addr+(CySRER<<index)) & CyTxMpty) {
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+ printk("Not clean (jiff=%lu)...", jiffies);
+#endif
+ current->state = TASK_INTERRUPTIBLE;
+ current->counter = 0; /* make us low-priority */
+ current->timeout = jiffies + char_time;
+ schedule();
+ if (current->signal & ~current->blocked)
+ break;
+ if (timeout && ((orig_jiffies + timeout) < jiffies))
+ break;
}
+ current->state = TASK_RUNNING;
+ } else {
+ // Nothing to do!
+ }
+ /* Run one more char cycle */
+ current->state = TASK_INTERRUPTIBLE;
+ current->counter = 0; /* make us low-priority */
+ current->timeout = jiffies + (char_time * 5);
+ schedule();
+ current->state = TASK_RUNNING;
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+ printk("Clean (jiff=%lu)...done\n", jiffies);
+#endif
+}
- info->xmit_buf[info->xmit_head++] = ch;
- info->xmit_head &= PAGE_SIZE - 1;
- info->xmit_cnt++;
- restore_flags(flags);
-} /* cy_put_char */
-
-
+/*
+ * This routine is called when a particular tty device is closed.
+ */
static void
-cy_flush_chars(struct tty_struct *tty)
+cy_close(struct tty_struct * tty, struct file * filp)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
unsigned long flags;
- unsigned char *base_addr;
- int card,chip,channel,index;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_flush_chars ttyC%d\n", info->line); /* */
+
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_close ttyC%d\n", info->line);
#endif
- if (serial_paranoia_check(info, tty->device, "cy_flush_chars"))
- return;
+ if (!info
+ || serial_paranoia_check(info, tty->device, "cy_close")){
+ return;
+ }
+#ifdef CY_DEBUG_OPEN
+ printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count);
+#endif
- if (info->xmit_cnt <= 0 || tty->stopped
- || tty->hw_stopped || !info->xmit_buf)
- return;
+ save_flags(flags); cli();
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ /* If the TTY is being hung up, nothing to do */
+ if (tty_hung_up_p(filp)) {
+ MOD_DEC_USE_COUNT;
+ restore_flags(flags);
+ return;
+ }
+
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("cyc:cy_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+#ifdef CY_DEBUG_COUNT
+ printk("cyc:cy_close at (%d): decrementing count to %d\n",
+ current->pid, info->count - 1);
+#endif
+ if (--info->count < 0) {
+#ifdef CY_DEBUG_COUNT
+ printk("cyc:cyc_close setting count to 0\n");
+#endif
+ info->count = 0;
+ }
+ if (info->count) {
+ MOD_DEC_USE_COUNT;
+ restore_flags(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ /*
+ * Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
+ if (info->flags & ASYNC_CALLOUT_ACTIVE)
+ info->callout_termios = *tty->termios;
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = channel;
- base_addr[CySRER<<index] |= CyTxMpty;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != CY_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+
+ if (!IS_CYC_Z(cy_card[info->card])) {
+ int channel = info->line - cy_card[info->card].first_line;
+ int index = cy_card[info->card].bus_index;
+ unsigned char *base_addr = (unsigned char *)
+ (cy_card[info->card].base_addr +
+ (cy_chip_offset[channel>>2] <<index));
+ /* Stop accepting input */
+ channel &= 0x03;
+ cy_writeb((ulong)base_addr+(CyCAR<<index), (u_char)channel);
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) & ~CyRxData);
+ if (info->flags & ASYNC_INITIALIZED) {
+ /* Waiting for on-board buffers to be empty before closing
+ the port */
+ cy_wait_until_sent(tty, info->timeout);
+ }
+ } else {
+#ifdef Z_WAKE
+ /* Waiting for on-board buffers to be empty before closing the port */
+ unsigned char *base_addr = (unsigned char *)
+ cy_card[info->card].base_addr;
+ struct FIRM_ID *firm_id = (struct FIRM_ID *) (base_addr + ID_ADDRESS);
+ struct ZFW_CTRL *zfw_ctrl =
+ (struct ZFW_CTRL *) (base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ struct CH_CTRL *ch_ctrl = zfw_ctrl->ch_ctrl;
+ int channel = info->line - cy_card[info->card].first_line;
+ int retval;
+
+ if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+ retval = cyz_issue_cmd(&cy_card[info->card], channel,
+ C_CM_IOCTLW, 0L);
+ if (retval != 0){
+ printk("cyc:shutdown retval (1) was %x\n", retval);
+ }
+ interruptible_sleep_on(&info->shutdown_wait);
+ }
+#endif
+ }
+
+ shutdown(info);
+ if (tty->driver.flush_buffer)
+ tty->driver.flush_buffer(tty);
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ current->state = TASK_INTERRUPTIBLE;
+ current->timeout = jiffies + info->close_delay;
+ schedule();
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
+ ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+
+#ifdef CY_DEBUG_OTHER
+ printk(" cyc:cy_close done\n");
+#endif
+
+ MOD_DEC_USE_COUNT;
restore_flags(flags);
-} /* cy_flush_chars */
+} /* cy_close */
/* This routine gets called when tty_write has put something into
- the write_queue. If the port is not already transmitting stuff,
- start it off by enabling interrupts. The interrupt service
- routine will then ensure that the characters are sent. If the
- port is already active, there is no need to kick it.
+ * the write_queue. The characters may come from user space or
+ * kernel space.
+ *
+ * This routine will return the number of characters actually
+ * accepted for writing.
+ *
+ * If the port is not already transmitting stuff, start it off by
+ * enabling interrupts. The interrupt service routine will then
+ * ensure that the characters are sent.
+ * If the port is already active, there is no need to kick it.
+ *
*/
static int
cy_write(struct tty_struct * tty, int from_user,
@@ -1643,197 +2833,633 @@
unsigned long flags;
int c, total = 0;
-#ifdef SERIAL_DEBUG_IO
- printk("cy_write ttyC%d\n", info->line); /* */
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_write ttyC%d\n", info->line); /* */
#endif
if (serial_paranoia_check(info, tty->device, "cy_write")){
- return 0;
+ return 0;
}
-
+
if (!tty || !info->xmit_buf || !tmp_buf){
return 0;
}
+ if (from_user)
+ down(&tmp_buf_sem);
+ save_flags(flags);
while (1) {
- save_flags(flags); cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0){
- restore_flags(flags);
- break;
- }
+ cli();
+ c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
- if (from_user) {
- down(&tmp_buf_sem);
- memcpy_fromfs(tmp_buf, buf, c);
- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- up(&tmp_buf_sem);
- } else
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- restore_flags(flags);
- buf += c;
- count -= c;
- total += c;
+ if (from_user) {
+ copy_from_user(tmp_buf, buf, c);
+ c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
+ } else
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt += c;
+ restore_flags(flags);
+ buf += c;
+ count -= c;
+ total += c;
+#if 0
+ SP("CW");
+ CP16(c);
+ SP(" ");
+#endif
}
-
- if (info->xmit_cnt
- && !tty->stopped
- && !tty->hw_stopped ) {
+ info->idle_stats.xmit_bytes += total;
+ info->idle_stats.xmit_idle = jiffies;
+
+ if (from_user)
+ up(&tmp_buf_sem);
+ if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
start_xmit(info);
}
+ restore_flags(flags);
return total;
} /* cy_write */
-static int
-cy_write_room(struct tty_struct *tty)
+/*
+ * This routine is called by the kernel to write a single
+ * character to the tty device. If the kernel uses this routine,
+ * it must call the flush_chars() routine (if defined) when it is
+ * done stuffing characters into the driver. If there is no room
+ * in the queue, the character is ignored.
+ */
+static void
+cy_put_char(struct tty_struct *tty, unsigned char ch)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- int ret;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_write_room ttyC%d\n", info->line); /* */
+ unsigned long flags;
+
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_put_char ttyC%d\n", info->line);
#endif
- if (serial_paranoia_check(info, tty->device, "cy_write_room"))
- return 0;
- ret = PAGE_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-} /* cy_write_room */
+ if (serial_paranoia_check(info, tty->device, "cy_put_char"))
+ return;
+ if (!tty || !info->xmit_buf)
+ return;
-static int
-cy_chars_in_buffer(struct tty_struct *tty)
-{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */
+ save_flags(flags); cli();
+ if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
+ restore_flags(flags);
+ return;
+ }
+
+ info->xmit_buf[info->xmit_head++] = ch;
+ info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+ info->xmit_cnt++;
+ info->idle_stats.xmit_bytes++;
+ info->idle_stats.xmit_idle = jiffies;
+ restore_flags(flags);
+#if 0
+ SP("+");
#endif
-
- if (serial_paranoia_check(info, tty->device, "cy_chars_in_buffer"))
- return 0;
-
- return info->xmit_cnt;
-} /* cy_chars_in_buffer */
+} /* cy_put_char */
+/*
+ * This routine is called by the kernel after it has written a
+ * series of characters to the tty device using put_char().
+ */
static void
-cy_flush_buffer(struct tty_struct *tty)
+cy_flush_chars(struct tty_struct *tty)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
unsigned long flags;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_flush_buffer ttyC%d\n", info->line); /* */
+ unsigned char *base_addr;
+ int card,chip,channel,index;
+
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->device, "cy_flush_buffer"))
- return;
- save_flags(flags); cli();
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- restore_flags(flags);
- wake_up_interruptible(&tty->write_wait);
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
- && tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
-} /* cy_flush_buffer */
+ if (serial_paranoia_check(info, tty->device, "cy_flush_chars"))
+ return;
+ if (info->xmit_cnt <= 0 || tty->stopped
+ || tty->hw_stopped || !info->xmit_buf)
+ return;
-/* This routine is called by the upper-layer tty layer to signal
- that incoming characters should be throttled or that the
- throttle should be released.
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), channel);
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyTxMpty);
+ restore_flags(flags);
+ } else {
+ /* Since polling is already in place,
+ nothing further need be done. */
+ }
+} /* cy_flush_chars */
+
+
+/*
+ * This routine returns the numbers of characters the tty driver
+ * will accept for queuing to be written. This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is activated.
*/
-static void
-cy_throttle(struct tty_struct * tty)
+static int
+cy_write_room(struct tty_struct *tty)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
- unsigned char *base_addr;
- int card,chip,channel,index;
-
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", _tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
- printk("cy_throttle ttyC%d\n", info->line);
+ int ret;
+
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_write_room ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->device, "cy_nthrottle")){
- return;
- }
+ if (serial_paranoia_check(info, tty->device, "cy_write_room"))
+ return 0;
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
+} /* cy_write_room */
- if (I_IXOFF(tty)) {
- info->x_char = STOP_CHAR(tty);
- /* Should use the "Send Special Character" feature!!! */
- }
+
+static int
+cy_chars_in_buffer(struct tty_struct *tty)
+{
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, channel;
+
+ if (serial_paranoia_check(info, tty->device, "cy_chars_in_buffer"))
+ return 0;
card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ channel = (info->line) - (cy_card[card].first_line);
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = ~CyRTS;
- restore_flags(flags);
+ if (!IS_CYC_Z(cy_card[card])) {
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_chars_in_buffer ttyC%d %d\n",
+ info->line, info->xmit_cnt); /* */
+#endif
+ return info->xmit_cnt;
+ } else {
+ static volatile struct FIRM_ID *firm_id;
+ static volatile struct ZFW_CTRL *zfw_ctrl;
+ static volatile struct CH_CTRL *ch_ctrl;
+ static volatile struct BUF_CTRL *buf_ctrl;
+ int char_count;
+ volatile uclong tx_put, tx_get, tx_bufsize;
+
+ firm_id = (struct FIRM_ID *)(cy_card[card].base_addr + ID_ADDRESS);
+ zfw_ctrl = (struct ZFW_CTRL *) (cy_card[card].base_addr +
+ cy_readl(&firm_id->zfwctrl_addr));
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
+
+ tx_get = cy_readl(&buf_ctrl->tx_get);
+ tx_put = cy_readl(&buf_ctrl->tx_put);
+ tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
+ if (tx_put >= tx_get)
+ char_count = tx_put - tx_get;
+ else
+ char_count = tx_put - tx_get + tx_bufsize;
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_chars_in_buffer ttyC%d %d\n",
+ info->line, info->xmit_cnt + char_count); /* */
+#endif
+ return (info->xmit_cnt + char_count);
+ }
+} /* cy_chars_in_buffer */
- return;
-} /* cy_throttle */
+
+/*
+ * ------------------------------------------------------------
+ * cy_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+/*
+ * This routine finds or computes the various line characteristics.
+ * It used to be called config_setup
+ */
static void
-cy_unthrottle(struct tty_struct * tty)
+set_line_char(struct cyclades_port * info)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
unsigned long flags;
unsigned char *base_addr;
int card,chip,channel,index;
+ unsigned cflag, iflag;
+ unsigned short chip_number;
+ int i;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", _tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
- printk("cy_unthrottle ttyC%d\n", info->line);
-#endif
- if (serial_paranoia_check(info, tty->device, "cy_nthrottle")){
- return;
+ if (!info->tty || !info->tty->termios){
+ return;
}
-
- if (I_IXOFF(tty)) {
- info->x_char = START_CHAR(tty);
- /* Should use the "Send Special Character" feature!!! */
+ if (info->line == -1){
+ return;
}
+ cflag = info->tty->termios->c_cflag;
+ iflag = info->tty->termios->c_iflag;
card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ channel = (info->line) - (cy_card[card].first_line);
+ chip_number = channel / 4;
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = CyRTS;
- restore_flags(flags);
+ if (!IS_CYC_Z(cy_card[card])) {
+
+ index = cy_card[card].bus_index;
+
+ /* baud rate */
+ i = cflag & CBAUD;
+
+ if (i & CBAUDEX) {
+ if (i == B57600)
+ i = 16;
+#ifdef B76800
+ else if(i == B76800)
+ i = 17;
+#endif
+ else if(i == B115200)
+ i = 18;
+ else if(i == B230400 && (info->chip_rev >= CD1400_REV_J)) {
+ /* It is a CD1400 rev. J or later */
+ i = 20;
+ }
+ else
+ info->tty->termios->c_cflag &= ~CBAUDEX;
+ }
+
+ if (i == 15) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ i += 1;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ i += 3;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST){
+ switch(info->baud) {
+ case 57600:
+ i += 1; break;
+#ifdef B76800
+ case 76800:
+ i += 2; break;
+#endif
+ case 115200:
+ i += 3; break;
+ case 230400:
+ i += 5; break;
+ default:
+ break;
+ }
+ }
+ }
+ if(info->chip_rev >= CD1400_REV_J) {
+ /* It is a CD1400 rev. J or later */
+ info->tbpr = baud_bpr_60[i]; /* Tx BPR */
+ info->tco = baud_co_60[i]; /* Tx CO */
+ info->rbpr = baud_bpr_60[i]; /* Rx BPR */
+ info->rco = baud_co_60[i]; /* Rx CO */
+ } else {
+ info->tbpr = baud_bpr_25[i]; /* Tx BPR */
+ info->tco = baud_co_25[i]; /* Tx CO */
+ info->rbpr = baud_bpr_25[i]; /* Rx BPR */
+ info->rco = baud_co_25[i]; /* Rx CO */
+ }
+ if (baud_table[i] == 134) {
+ info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
+ /* get it right for 134.5 baud */
+ } else if (baud_table[i]) {
+ info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2;
+ /* this needs to be propagated into the card info */
+ } else {
+ info->timeout = 0;
+ }
+ /* By tradition (is it a standard?) a baud rate of zero
+ implies the line should be/has been closed. A bit
+ later in this routine such a test is performed. */
+
+ /* byte size and parity */
+ info->cor5 = 0;
+ info->cor4 = 0;
+ info->cor3 = (info->default_threshold
+ ? info->default_threshold
+ : baud_cor3[i]); /* receive threshold */
+ info->cor2 = CyETC;
+ switch(cflag & CSIZE){
+ case CS5:
+ info->cor1 = Cy_5_BITS;
+ break;
+ case CS6:
+ info->cor1 = Cy_6_BITS;
+ break;
+ case CS7:
+ info->cor1 = Cy_7_BITS;
+ break;
+ case CS8:
+ info->cor1 = Cy_8_BITS;
+ break;
+ }
+ if(cflag & CSTOPB){
+ info->cor1 |= Cy_2_STOP;
+ }
+ if (cflag & PARENB){
+ if (cflag & PARODD){
+ info->cor1 |= CyPARITY_O;
+ }else{
+ info->cor1 |= CyPARITY_E;
+ }
+ }else{
+ info->cor1 |= CyPARITY_NONE;
+ }
+
+ /* CTS flow control flag */
+ if (cflag & CRTSCTS){
+ info->flags |= ASYNC_CTS_FLOW;
+ info->cor2 |= CyCtsAE;
+ }else{
+ info->flags &= ~ASYNC_CTS_FLOW;
+ info->cor2 &= ~CyCtsAE;
+ }
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else
+ info->flags |= ASYNC_CHECK_CD;
+
+ /***********************************************
+ The hardware option, CyRtsAO, presents RTS when
+ the chip has characters to send. Since most modems
+ use RTS as reverse (inbound) flow control, this
+ option is not used. If inbound flow control is
+ necessary, DTR can be programmed to provide the
+ appropriate signals for use with a non-standard
+ cable. Contact Marcio Saito for details.
+ ***********************************************/
+
+ chip = channel>>2;
+ channel &= 0x03;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+
+ /* tx and rx baud rate */
+
+ cy_writeb((u_long)base_addr+(CyTCOR<<index), info->tco);
+ cy_writeb((u_long)base_addr+(CyTBPR<<index), info->tbpr);
+ cy_writeb((u_long)base_addr+(CyRCOR<<index), info->rco);
+ cy_writeb((u_long)base_addr+(CyRBPR<<index), info->rbpr);
+
+ /* set line characteristics according configuration */
+
+ cy_writeb((u_long)base_addr+(CySCHR1<<index),
+ START_CHAR(info->tty));
+ cy_writeb((u_long)base_addr+(CySCHR2<<index),
+ STOP_CHAR(info->tty));
+ cy_writeb((u_long)base_addr+(CyCOR1<<index), info->cor1);
+ cy_writeb((u_long)base_addr+(CyCOR2<<index), info->cor2);
+ cy_writeb((u_long)base_addr+(CyCOR3<<index), info->cor3);
+ cy_writeb((u_long)base_addr+(CyCOR4<<index), info->cor4);
+ cy_writeb((u_long)base_addr+(CyCOR5<<index), info->cor5);
+
+ cyy_issue_cmd(base_addr,
+ CyCOR_CHANGE|CyCOR1ch|CyCOR2ch|CyCOR3ch,index);
+
+ cy_writeb((u_long)base_addr+(CyCAR<<index),
+ (u_char)channel); /* !!! Is this needed? */
+ cy_writeb((u_long)base_addr+(CyRTPR<<index), (info->default_timeout
+ ? info->default_timeout
+ : 0x02)); /* 10ms rx timeout */
+
+ if (C_CLOCAL(info->tty)) {
+ /* without modem intr */
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyMdmCh);
+ /* act on 1->0 modem transitions */
+ if ((cflag & CRTSCTS) && info->rflow) {
+ cy_writeb((u_long)base_addr+(CyMCOR1<<index),
+ (CyCTS|rflow_thr[i]));
+ } else {
+ cy_writeb((u_long)base_addr+(CyMCOR1<<index), CyCTS);
+ }
+ /* act on 0->1 modem transitions */
+ cy_writeb((u_long)base_addr+(CyMCOR2<<index), CyCTS);
+ } else {
+ /* without modem intr */
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyMdmCh);
+ /* act on 1->0 modem transitions */
+ if ((cflag & CRTSCTS) && info->rflow) {
+ cy_writeb((u_long)base_addr+(CyMCOR1<<index),
+ (CyDSR|CyCTS|CyRI|CyDCD|rflow_thr[i]));
+ } else {
+ cy_writeb((u_long)base_addr+(CyMCOR1<<index),
+ CyDSR|CyCTS|CyRI|CyDCD);
+ }
+ /* act on 0->1 modem transitions */
+ cy_writeb((u_long)base_addr+(CyMCOR2<<index),
+ CyDSR|CyCTS|CyRI|CyDCD);
+ }
+
+ if(i == 0){ /* baud rate is zero, turn off line */
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_line_char dropping DTR\n");
+ printk(" status: 0x%x,
+ 0x%x\n", cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
+#endif
+ }else{
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_line_char raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
+#endif
+ }
+
+ if (info->tty){
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+
+ restore_flags(flags);
+ } else {
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
+ struct BUF_CTRL *buf_ctrl;
+ int retval;
+
+ firm_id = (struct FIRM_ID *)
+ (cy_card[card].base_addr + ID_ADDRESS);
+ if (!ISZLOADED(cy_card[card])) {
+ return;
+ }
+
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cy_card[card].base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
+ /* baud rate */
+ switch(i = cflag & CBAUD){
+ /*
+ case B0: cy_writel(&ch_ctrl->comm_baud , 0); break;
+ */
+ case B50: cy_writel(&ch_ctrl->comm_baud , 50); break;
+ case B75: cy_writel(&ch_ctrl->comm_baud , 75); break;
+ case B110: cy_writel(&ch_ctrl->comm_baud , 110); break;
+ case B134: cy_writel(&ch_ctrl->comm_baud , 134); break;
+ case B150: cy_writel(&ch_ctrl->comm_baud , 150); break;
+ case B200: cy_writel(&ch_ctrl->comm_baud , 200); break;
+ case B300: cy_writel(&ch_ctrl->comm_baud , 300); break;
+ case B600: cy_writel(&ch_ctrl->comm_baud , 600); break;
+ case B1200: cy_writel(&ch_ctrl->comm_baud , 1200); break;
+ case B1800: cy_writel(&ch_ctrl->comm_baud , 1800); break;
+ case B2400: cy_writel(&ch_ctrl->comm_baud , 2400); break;
+ case B4800: cy_writel(&ch_ctrl->comm_baud , 4800); break;
+ case B9600: cy_writel(&ch_ctrl->comm_baud , 9600); break;
+ case B19200: cy_writel(&ch_ctrl->comm_baud , 19200); break;
+ case B38400:
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI){
+ cy_writel(&ch_ctrl->comm_baud , 57600);
+ }else if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI){
+ cy_writel(&ch_ctrl->comm_baud , 115200);
+ }else if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST){
+ cy_writel(&ch_ctrl->comm_baud , info->baud);
+ }else{
+ cy_writel(&ch_ctrl->comm_baud , 38400);
+ }
+ break;
+ case B57600: cy_writel(&ch_ctrl->comm_baud , 57600); break;
+#ifdef B76800
+ case B76800: cy_writel(&ch_ctrl->comm_baud , 76800); break;
+#endif
+ case B115200: cy_writel(&ch_ctrl->comm_baud , 115200); break;
+ case B230400: cy_writel(&ch_ctrl->comm_baud , 230400); break;
+ case B460800: cy_writel(&ch_ctrl->comm_baud , 460800); break;
+ }
+
+ if ((i = cy_readl(&ch_ctrl->comm_baud)) == 134) {
+ info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
+ /* get it right for 134.5 baud */
+ } else if (i) {
+ info->timeout = (info->xmit_fifo_size*HZ*15/i) + 2;
+ /* this needs to be propagated into the card info */
+ } else {
+ info->timeout = 0;
+ }
+
+ /* byte size and parity */
+ switch(cflag & CSIZE){
+ case CS5: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS5); break;
+ case CS6: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS6); break;
+ case CS7: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS7); break;
+ case CS8: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS8); break;
+ }
+ if(cflag & CSTOPB){
+ cy_writel(&ch_ctrl->comm_data_l,
+ cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
+ }else{
+ cy_writel(&ch_ctrl->comm_data_l,
+ cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
+ }
+ if (cflag & PARENB){
+ if (cflag & PARODD){
+ cy_writel(&ch_ctrl->comm_parity , C_PR_ODD);
+ }else{
+ cy_writel(&ch_ctrl->comm_parity , C_PR_EVEN);
+ }
+ }else{
+ cy_writel(&ch_ctrl->comm_parity , C_PR_NONE);
+ }
+
+ /* CTS flow control flag */
+ if (cflag & CRTSCTS){
+ info->flags |= ASYNC_CTS_FLOW;
+ cy_writel(&ch_ctrl->hw_flow,
+ cy_readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
+ }else{
+ info->flags &= ~ASYNC_CTS_FLOW;
+ cy_writel(&ch_ctrl->hw_flow,
+ cy_readl(&ch_ctrl->hw_flow) & ~(C_RS_CTS | C_RS_RTS));
+ }
+
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
+ if (retval != 0){
+ printk("cyc:set_line_char retval at %d was %x\n",
+ __LINE__, retval);
+ }
+
+ /* CD sensitivity */
+ if (cflag & CLOCAL){
+ info->flags &= ~ASYNC_CHECK_CD;
+ }else{
+ info->flags |= ASYNC_CHECK_CD;
+ }
+
+ if (iflag & IXON){
+ cy_writel(&ch_ctrl->sw_flow,
+ cy_readl(&ch_ctrl->sw_flow) | C_FL_OXX);
+ } else {
+ cy_writel(&ch_ctrl->sw_flow,
+ cy_readl(&ch_ctrl->sw_flow) & ~C_FL_OXX);
+ }
+
+ if(i == 0){ /* baud rate is zero, turn off line */
+ cy_writel(&ch_ctrl->rs_control,
+ cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_line_char dropping Z DTR\n");
+#endif
+ }else{
+ cy_writel(&ch_ctrl->rs_control,
+ cy_readl(&ch_ctrl->rs_control) | C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_line_char raising Z DTR\n");
+#endif
+ }
+
+ retval = cyz_issue_cmd( &cy_card[card], channel, C_CM_IOCTLM, 0L);
+ if (retval != 0){
+ printk("cyc:set_line_char retval at %d was %x\n",
+ __LINE__, retval);
+ }
+
+ if (info->tty){
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ }
+
+} /* set_line_char */
- return;
-} /* cy_unthrottle */
static int
get_serial_info(struct cyclades_port * info,
@@ -1850,14 +3476,15 @@
tmp.port = info->card * 0x100 + info->line - cinfo->first_line;
tmp.irq = cinfo->irq;
tmp.flags = info->flags;
- tmp.baud_base = 0; /*!!!*/
tmp.close_delay = info->close_delay;
+ tmp.baud_base = info->baud;
tmp.custom_divisor = 0; /*!!!*/
tmp.hub6 = 0; /*!!!*/
- memcpy_tofs(retinfo,&tmp,sizeof(*retinfo));
+ copy_to_user(retinfo,&tmp,sizeof(*retinfo));
return 0;
} /* get_serial_info */
+
static int
set_serial_info(struct cyclades_port * info,
struct serial_struct * new_info)
@@ -1866,18 +3493,20 @@
struct cyclades_port old_info;
if (!new_info)
- return -EFAULT;
- memcpy_fromfs(&new_serial,new_info,sizeof(new_serial));
+ return -EFAULT;
+ copy_from_user(&new_serial,new_info,sizeof(new_serial));
old_info = *info;
if (!suser()) {
- if ((new_serial.close_delay != info->close_delay) ||
+ if ((new_serial.close_delay != info->close_delay) ||
+ (new_serial.baud_base != info->baud) ||
((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
(info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- goto check_and_exit;
+ return -EPERM;
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ info->baud = new_serial.baud_base;
+ goto check_and_exit;
}
@@ -1886,20 +3515,23 @@
* At this point, we start making changes.....
*/
+ info->baud = new_serial.baud_base;
info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->close_delay = new_serial.close_delay;
-
+ (new_serial.flags & ASYNC_FLAGS));
+ info->close_delay = new_serial.close_delay * HZ/100;
+ info->closing_wait = new_serial.closing_wait * HZ/100;
+
check_and_exit:
if (info->flags & ASYNC_INITIALIZED){
- config_setup(info);
- return 0;
+ set_line_char(info);
+ return 0;
}else{
return startup(info);
}
} /* set_serial_info */
+
static int
get_modem_info(struct cyclades_port * info, unsigned int *value)
{
@@ -1907,32 +3539,73 @@
unsigned char *base_addr;
unsigned long flags;
unsigned char status;
+ unsigned long lstatus;
unsigned int result;
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
card = info->card;
channel = (info->line) - (cy_card[card].first_line);
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- status = base_addr[CyMSVR1<<index];
- status |= base_addr[CyMSVR2<<index];
- restore_flags(flags);
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ status = cy_readb(base_addr+(CyMSVR1<<index));
+ status |= cy_readb(base_addr+(CyMSVR2<<index));
+ restore_flags(flags);
+
+
+ if (info->rtsdtr_inv) {
+ result = ((status & CyRTS) ? TIOCM_DTR : 0)
+ | ((status & CyDTR) ? TIOCM_RTS : 0);
+ } else {
+ result = ((status & CyRTS) ? TIOCM_RTS : 0)
+ | ((status & CyDTR) ? TIOCM_DTR : 0);
+ }
+ result |= ((status & CyDCD) ? TIOCM_CAR : 0)
+ | ((status & CyRI) ? TIOCM_RNG : 0)
+ | ((status & CyDSR) ? TIOCM_DSR : 0)
+ | ((status & CyCTS) ? TIOCM_CTS : 0);
+ } else {
+ base_addr = (unsigned char*) (cy_card[card].base_addr);
+
+ if (cy_card[card].num_chips != -1){
+ return -EINVAL;
+ }
+
+ firm_id = (struct FIRM_ID *)
+ (cy_card[card].base_addr + ID_ADDRESS);
+ if (ISZLOADED(cy_card[card])) {
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cy_card[card].base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+ lstatus = cy_readl(&ch_ctrl[channel].rs_status);
+ result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0)
+ | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0)
+ | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0)
+ | ((lstatus & C_RS_RI) ? TIOCM_RNG : 0)
+ | ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0)
+ | ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
+ }else{
+ result = 0;
+ return -ENODEV;
+ }
- result = ((status & CyRTS) ? TIOCM_RTS : 0)
- | ((status & CyDTR) ? TIOCM_DTR : 0)
- | ((status & CyDCD) ? TIOCM_CAR : 0)
- | ((status & CyRI) ? TIOCM_RNG : 0)
- | ((status & CyDSR) ? TIOCM_DSR : 0)
- | ((status & CyCTS) ? TIOCM_CTS : 0);
- put_fs_long(result,(unsigned long *) value);
+ }
+ cy_put_user(result,(unsigned long *) value);
return 0;
} /* get_modem_info */
+
static int
set_modem_info(struct cyclades_port * info, unsigned int cmd,
unsigned int *value)
@@ -1940,221 +3613,398 @@
int card,chip,channel,index;
unsigned char *base_addr;
unsigned long flags;
- unsigned int arg = get_fs_long((unsigned long *) value);
+ unsigned int arg = cy_get_user((unsigned long *) value);
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+ struct CH_CTRL *ch_ctrl;
+ int retval;
card = info->card;
channel = (info->line) - (cy_card[card].first_line);
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
- switch (cmd) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = CyRTS;
- restore_flags(flags);
- }
- if (arg & TIOCM_DTR){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR2<<index] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+ switch (cmd) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ }
+ restore_flags(flags);
+ }
+ if (arg & TIOCM_DTR){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
#endif
- restore_flags(flags);
- }
- break;
- case TIOCMBIC:
- if (arg & TIOCM_RTS){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = ~CyRTS;
- restore_flags(flags);
- }
- if (arg & TIOCM_DTR){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR2<<index] = ~CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+ restore_flags(flags);
+ }
+ break;
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index),
+ (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ }
+ restore_flags(flags);
+ }
+ if (arg & TIOCM_DTR){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
#endif
- restore_flags(flags);
- }
- break;
- case TIOCMSET:
- if (arg & TIOCM_RTS){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = CyRTS;
- restore_flags(flags);
- }else{
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = ~CyRTS;
- restore_flags(flags);
- }
- if (arg & TIOCM_DTR){
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR2<<index] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+ restore_flags(flags);
+ }
+ break;
+ case TIOCMSET:
+ if (arg & TIOCM_RTS){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ }
+ restore_flags(flags);
+ }else{
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ }
+ restore_flags(flags);
+ }
+ if (arg & TIOCM_DTR){
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
#endif
- restore_flags(flags);
- }else{
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR2<<index] = ~CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
+ restore_flags(flags);
+ }else{
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ }
+
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr+(CyMSVR1<<index)),
+ cy_readb(base_addr+(CyMSVR2<<index)));
#endif
- restore_flags(flags);
+ restore_flags(flags);
+ }
+ break;
+ default:
+ return -EINVAL;
}
- break;
- default:
+ } else {
+ base_addr = (unsigned char*) (cy_card[card].base_addr);
+
+ firm_id = (struct FIRM_ID *)
+ (cy_card[card].base_addr + ID_ADDRESS);
+ if (ISZLOADED(cy_card[card])) {
+ zfw_ctrl = (struct ZFW_CTRL *)
+ (cy_card[card].base_addr + cy_readl(&firm_id->zfwctrl_addr));
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ switch (cmd) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS);
+ }
+ if (arg & TIOCM_DTR){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info raising Z DTR\n");
+#endif
+ }
+ break;
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_RTS);
+ }
+ if (arg & TIOCM_DTR){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info clearing Z DTR\n");
+#endif
+ }
+ break;
+ case TIOCMSET:
+ if (arg & TIOCM_RTS){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS);
+ }else{
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_RTS);
+ }
+ if (arg & TIOCM_DTR){
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info raising Z DTR\n");
+#endif
+ }else{
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+ printk("cyc:set_modem_info clearing Z DTR\n");
+#endif
+ }
+ break;
+ default:
return -EINVAL;
- }
+ }
+ }else{
+ return -ENODEV;
+ }
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM,0L);
+ if (retval != 0){
+ printk("cyc:set_modem_info retval at %d was %x\n",
+ __LINE__, retval);
+ }
+ }
return 0;
} /* set_modem_info */
+
static void
send_break( struct cyclades_port * info, int duration)
-{ /* Let the transmit ISR take care of this (since it
- requires stuffing characters into the output stream).
- */
- info->x_break = duration;
- if (!info->xmit_cnt ) {
- start_xmit(info);
+{
+
+ if (!IS_CYC_Z(cy_card[info->card])) {
+ /* Let the transmit ISR take care of this (since it
+ requires stuffing characters into the output stream).
+ */
+ info->x_break = duration;
+ if (!info->xmit_cnt ) {
+ start_xmit(info);
+ }
+ } else {
+ /* For the moment we ignore the duration parameter!!!
+ A better implementation will use C_CM_SET_BREAK
+ and C_CM_CLR_BREAK with the appropriate delay.
+ */
+#if 1
+// this appears to wedge the output data stream
+int retval;
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ (info->line) - (cy_card[info->card].first_line),
+ C_CM_SENDBRK, 0L);
+ if (retval != 0){
+ printk("cyc:send_break retval at %d was %x\n",
+ __LINE__, retval);
+ }
+#endif
}
} /* send_break */
+
static int
get_mon_info(struct cyclades_port * info, struct cyclades_monitor * mon)
{
- memcpy_tofs(mon, &info->mon, sizeof(struct cyclades_monitor));
- info->mon.int_count = 0;
- info->mon.char_count = 0;
- info->mon.char_max = 0;
- info->mon.char_last = 0;
- return 0;
-}
+ copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor));
+ info->mon.int_count = 0;
+ info->mon.char_count = 0;
+ info->mon.char_max = 0;
+ info->mon.char_last = 0;
+ return 0;
+}/* get_mon_info */
+
static int
set_threshold(struct cyclades_port * info, unsigned long value)
{
- unsigned char *base_addr;
- int card,channel,chip,index;
+ unsigned char *base_addr;
+ int card,channel,chip,index;
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ info->cor3 &= ~CyREC_FIFO;
+ info->cor3 |= value & CyREC_FIFO;
+ cy_writeb((u_long)base_addr+(CyCOR3<<index), info->cor3);
+ cyy_issue_cmd(base_addr,CyCOR_CHANGE|CyCOR3ch,index);
+ } else {
+ // Nothing to do!
+ }
+ return 0;
+}/* set_threshold */
- info->cor3 &= ~CyREC_FIFO;
- info->cor3 |= value & CyREC_FIFO;
- base_addr[CyCOR3<<index] = info->cor3;
- write_cy_cmd(base_addr,CyCOR_CHANGE|CyCOR3ch,index);
- return 0;
-}
static int
get_threshold(struct cyclades_port * info, unsigned long *value)
{
- unsigned char *base_addr;
- int card,channel,chip,index;
- unsigned long tmp;
+ unsigned char *base_addr;
+ int card,channel,chip,index;
+ unsigned long tmp;
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ tmp = cy_readb(base_addr+(CyCOR3<<index)) & CyREC_FIFO;
+ cy_put_user(tmp,value);
+ } else {
+ // Nothing to do!
+ }
+ return 0;
+}/* get_threshold */
- tmp = base_addr[CyCOR3<<index] & CyREC_FIFO;
- put_fs_long(tmp,value);
- return 0;
-}
static int
set_default_threshold(struct cyclades_port * info, unsigned long value)
{
- info->default_threshold = value & 0x0f;
- return 0;
-}
+ info->default_threshold = value & 0x0f;
+ return 0;
+}/* set_default_threshold */
+
static int
get_default_threshold(struct cyclades_port * info, unsigned long *value)
{
- put_fs_long(info->default_threshold,value);
- return 0;
-}
+ cy_put_user(info->default_threshold,value);
+ return 0;
+}/* get_default_threshold */
+
static int
set_timeout(struct cyclades_port * info, unsigned long value)
{
- unsigned char *base_addr;
- int card,channel,chip,index;
+ unsigned char *base_addr;
+ int card,channel,chip,index;
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ cy_writeb((u_long)base_addr+(CyRTPR<<index), value & 0xff);
+ } else {
+ // Nothing to do!
+ }
+ return 0;
+}/* set_timeout */
- base_addr[CyRTPR<<index] = value & 0xff;
- return 0;
-}
static int
get_timeout(struct cyclades_port * info, unsigned long *value)
{
- unsigned char *base_addr;
- int card,channel,chip,index;
- unsigned long tmp;
+ unsigned char *base_addr;
+ int card,channel,chip,index;
+ unsigned long tmp;
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ tmp = cy_readb(base_addr+(CyRTPR<<index));
+ cy_put_user(tmp,value);
+ } else {
+ // Nothing to do!
+ }
+ return 0;
+}/* get_timeout */
- tmp = base_addr[CyRTPR<<index];
- put_fs_long(tmp,value);
- return 0;
-}
static int
set_default_timeout(struct cyclades_port * info, unsigned long value)
{
- info->default_timeout = value & 0xff;
- return 0;
-}
+ info->default_timeout = value & 0xff;
+ return 0;
+}/* set_default_timeout */
+
static int
get_default_timeout(struct cyclades_port * info, unsigned long *value)
{
- put_fs_long(info->default_timeout,value);
- return 0;
-}
+ cy_put_user(info->default_timeout,value);
+ return 0;
+}/* get_default_timeout */
+/*
+ * This routine allows the tty driver to implement device-
+ * specific ioctl's. If the ioctl number passed in cmd is
+ * not recognized by the driver, it should return ENOIOCTLCMD.
+ */
static int
cy_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@@ -2163,8 +4013,9 @@
struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
int ret_val = 0;
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
+ info->line, cmd, arg); /* */
#endif
switch (cmd) {
@@ -2176,7 +4027,7 @@
break;
}
ret_val = get_mon_info(info, (struct cyclades_monitor *)arg);
- break;
+ break;
case CYGETTHRESH:
error = verify_area(VERIFY_WRITE, (void *) arg
,sizeof(unsigned long));
@@ -2184,11 +4035,11 @@
ret_val = error;
break;
}
- ret_val = get_threshold(info, (unsigned long *)arg);
- break;
+ ret_val = get_threshold(info, (unsigned long *)arg);
+ break;
case CYSETTHRESH:
ret_val = set_threshold(info, (unsigned long)arg);
- break;
+ break;
case CYGETDEFTHRESH:
error = verify_area(VERIFY_WRITE, (void *) arg
,sizeof(unsigned long));
@@ -2196,11 +4047,11 @@
ret_val = error;
break;
}
- ret_val = get_default_threshold(info, (unsigned long *)arg);
- break;
+ ret_val = get_default_threshold(info, (unsigned long *)arg);
+ break;
case CYSETDEFTHRESH:
ret_val = set_default_threshold(info, (unsigned long)arg);
- break;
+ break;
case CYGETTIMEOUT:
error = verify_area(VERIFY_WRITE, (void *) arg
,sizeof(unsigned long));
@@ -2208,11 +4059,11 @@
ret_val = error;
break;
}
- ret_val = get_timeout(info, (unsigned long *)arg);
- break;
+ ret_val = get_timeout(info, (unsigned long *)arg);
+ break;
case CYSETTIMEOUT:
ret_val = set_timeout(info, (unsigned long)arg);
- break;
+ break;
case CYGETDEFTIMEOUT:
error = verify_area(VERIFY_WRITE, (void *) arg
,sizeof(unsigned long));
@@ -2220,23 +4071,65 @@
ret_val = error;
break;
}
- ret_val = get_default_timeout(info, (unsigned long *)arg);
- break;
+ ret_val = get_default_timeout(info, (unsigned long *)arg);
+ break;
case CYSETDEFTIMEOUT:
ret_val = set_default_timeout(info, (unsigned long)arg);
+ break;
+ case CYSETRFLOW:
+ info->rflow = (int)arg;
+ ret_val = 0;
+ break;
+ case CYGETRFLOW:
+ ret_val = info->rflow;
+ break;
+ case CYSETRTSDTR_INV:
+ info->rtsdtr_inv = (int)arg;
+ ret_val = 0;
+ break;
+ case CYGETRTSDTR_INV:
+ ret_val = info->rtsdtr_inv;
+ break;
+ case CYGETCARDINFO:
+ error = verify_area(VERIFY_WRITE, (void *) arg
+ ,sizeof(struct cyclades_card));
+ if (error){
+ ret_val = error;
+ break;
+ }
+ copy_to_user((void *)arg, (void *)&cy_card[info->card],
+ sizeof (struct cyclades_card));
+ ret_val = 0;
+ break;
+ case CYGETCD1400VER:
+ ret_val = info->chip_rev;
+ break;
+ case CYZSETPOLLCYCLE:
+ cyz_polling_cycle = (arg * HZ) / 1000;
+ ret_val = 0;
+ break;
+ case CYZGETPOLLCYCLE:
+ ret_val = (cyz_polling_cycle * 1000) / HZ;
+ break;
+ case CYSETWAIT:
+ info->closing_wait = (unsigned short)arg * HZ/100;
+ ret_val = 0;
+ break;
+ case CYGETWAIT:
+ ret_val = info->closing_wait / (HZ/100);
break;
case TCSBRK: /* SVID version: non-zero arg --> no break */
- ret_val = tty_check_change(tty);
- if (ret_val)
- return ret_val;
+ ret_val = tty_check_change(tty);
+ if (ret_val)
+ return ret_val;
tty_wait_until_sent(tty,0);
if (!arg)
send_break(info, HZ/4); /* 1/4 second */
break;
case TCSBRKP: /* support for POSIX tcsendbreak() */
- ret_val = tty_check_change(tty);
- if (ret_val)
- return ret_val;
+ ret_val = tty_check_change(tty);
+ if (ret_val)
+ return ret_val;
tty_wait_until_sent(tty,0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
break;
@@ -2254,18 +4147,18 @@
ret_val = error;
break;
}
- put_fs_long(C_CLOCAL(tty) ? 1 : 0,
+ cy_put_user(C_CLOCAL(tty) ? 1 : 0,
(unsigned long *) arg);
break;
case TIOCSSOFTCAR:
- error = verify_area(VERIFY_READ, (void *) arg
- ,sizeof(unsigned long *));
- if (error) {
- ret_val = error;
- break;
- }
+ error = verify_area(VERIFY_READ, (void *) arg
+ ,sizeof(unsigned long *));
+ if (error) {
+ ret_val = error;
+ break;
+ }
- arg = get_fs_long((unsigned long *) arg);
+ arg = cy_get_user((unsigned long *) arg);
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
@@ -2300,31 +4193,35 @@
(struct serial_struct *) arg);
break;
default:
- ret_val = -ENOIOCTLCMD;
+ ret_val = -ENOIOCTLCMD;
}
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_ioctl done\n");
+#ifdef CY_DEBUG_OTHER
+ printk(" cyc:cy_ioctl done\n");
#endif
return ret_val;
} /* cy_ioctl */
-
-
+/*
+ * This routine allows the tty driver to be notified when
+ * device's termios settings have changed. Note that a
+ * well-designed tty driver should be prepared to accept the case
+ * where old == NULL, and try to do something rational.
+ */
static void
cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_set_termios ttyC%d\n", info->line);
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_set_termios ttyC%d\n", info->line);
#endif
if (tty->termios->c_cflag == old_termios->c_cflag)
return;
- config_setup(info);
+ set_line_char(info);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -2341,353 +4238,281 @@
} /* cy_set_termios */
+/*
+ * void (*set_ldisc)(struct tty_struct *tty);
+ *
+ * This routine allows the tty driver to be notified when the
+ * device's termios settings have changed.
+ *
+ */
+
+
+/* This routine is called by the upper-layer tty layer to signal
+ that incoming characters should be throttled because the input
+ buffers are close to full.
+ */
static void
-cy_close(struct tty_struct * tty, struct file * filp)
+cy_throttle(struct tty_struct * tty)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
unsigned long flags;
+ unsigned char *base_addr;
+ int card,chip,channel,index;
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_close ttyC%d\n", info->line);
-#endif
+#ifdef CY_DEBUG_THROTTLE
+ char buf[64];
- if (!info
- || serial_paranoia_check(info, tty->device, "cy_close")){
- return;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_close ttyC%d, count = %d\n", info->line, info->count);
+ printk("cyc:throttle %s: %d....ttyC%d\n",
+ _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty), info->line);
#endif
- save_flags(flags); cli();
-
- /* If the TTY is being hung up, nothing to do */
- if (tty_hung_up_p(filp)) {
- MOD_DEC_USE_COUNT;
- restore_flags(flags);
- return;
- }
-
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("cy_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d(%d): decrementing count to %d\n", __LINE__, current->pid, info->count - 1);
-#endif
- if (--info->count < 0) {
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
- info->count = 0;
+ if (serial_paranoia_check(info, tty->device, "cy_throttle")){
+ return;
}
- if (info->count)
- {
- MOD_DEC_USE_COUNT;
- restore_flags(flags);
- return;
+
+ if (I_IXOFF(tty)) {
+ info->x_char = STOP_CHAR(tty);
+ /* Should use the "Send Special Character" feature!!! */
}
- info->flags |= ASYNC_CLOSING;
- /*
- * Save the termios structure, since this port may have
- * separate termios for callout and dialin.
- */
- if (info->flags & ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
- if (info->flags & ASYNC_CALLOUT_ACTIVE)
- info->callout_termios = *tty->termios;
- if (info->flags & ASYNC_INITIALIZED)
- tty_wait_until_sent(tty, 30*HZ); /* 30 seconds timeout */
- shutdown(info);
- if (tty->driver.flush_buffer)
- tty->driver.flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
- info->event = 0;
- info->tty = 0;
- if (info->blocked_open) {
- if (info->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- current->timeout = jiffies + info->close_delay;
- schedule();
+
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), ~CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), ~CyRTS);
}
- wake_up_interruptible(&info->open_wait);
+ restore_flags(flags);
+ } else {
+ // Nothing to do!
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
- ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_close done\n");
-#endif
-
- MOD_DEC_USE_COUNT;
- restore_flags(flags);
return;
-} /* cy_close */
+} /* cy_throttle */
+
/*
- * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
+ * This routine notifies the tty driver that it should signal
+ * that characters can now be sent to the tty without fear of
+ * overrunning the input buffers of the line disciplines.
*/
-void
-cy_hangup(struct tty_struct *tty)
+static void
+cy_unthrottle(struct tty_struct * tty)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_hangup ttyC%d\n", info->line); /* */
-#endif
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
+ unsigned char *base_addr;
+ int card,chip,channel,index;
- if (serial_paranoia_check(info, tty->device, "cy_hangup"))
- return;
-
- shutdown(info);
- info->event = 0;
- info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d(%d): setting count to 0\n", __LINE__, current->pid);
+#ifdef CY_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("cyc:unthrottle %s: %d....ttyC%d\n",
+ _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty), info->line);
#endif
- info->tty = 0;
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
- wake_up_interruptible(&info->open_wait);
-} /* cy_hangup */
+ if (serial_paranoia_check(info, tty->device, "cy_unthrottle")){
+ return;
+ }
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ info->x_char = START_CHAR(tty);
+ /* Should use the "Send Special Character" feature!!! */
+ }
-/*
- * ------------------------------------------------------------
- * cy_open() and friends
- * ------------------------------------------------------------
- */
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel>>2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
-static int
-block_til_ready(struct tty_struct *tty, struct file * filp,
- struct cyclades_port *info)
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index), (u_char)channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb((u_long)base_addr+(CyMSVR2<<index), CyDTR);
+ } else {
+ cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
+ }
+ restore_flags(flags);
+ }else{
+ // Nothing to do!
+ }
+
+ return;
+} /* cy_unthrottle */
+
+
+/* cy_start and cy_stop provide software output flow control as a
+ function of XON/XOFF, software CTS, and other such stuff.
+*/
+static void
+cy_stop(struct tty_struct *tty)
{
- struct wait_queue wait = { current, NULL };
struct cyclades_card *cinfo;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned char *base_addr;
+ int chip,channel,index;
unsigned long flags;
- int chip, channel,index;
- int retval;
- char *base_addr;
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
- if (info->flags & ASYNC_HUP_NOTIFY){
- return -EAGAIN;
- }else{
- return -ERESTARTSYS;
- }
- }
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_stop ttyC%d\n", info->line); /* */
+#endif
- /*
- * If this is a callout device, then just make sure the normal
- * device isn't being used.
- */
- if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
- if (info->flags & ASYNC_NORMAL_ACTIVE){
- return -EBUSY;
- }
- if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
- (info->flags & ASYNC_SESSION_LOCKOUT) &&
- (info->session != current->session)){
- return -EBUSY;
- }
- if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
- (info->flags & ASYNC_PGRP_LOCKOUT) &&
- (info->pgrp != current->pgrp)){
- return -EBUSY;
- }
- info->flags |= ASYNC_CALLOUT_ACTIVE;
- return 0;
+ if (serial_paranoia_check(info, tty->device, "cy_stop"))
+ return;
+
+ cinfo = &cy_card[info->card];
+ channel = info->line - cinfo->first_line;
+ if (!IS_CYC_Z(*cinfo)) {
+ index = cinfo->bus_index;
+ chip = channel>>2;
+ channel &= 0x03;
+ base_addr = (unsigned char*)
+ (cy_card[info->card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index),
+ (u_char)(channel & 0x0003)); /* index channel */
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) & ~CyTxMpty);
+ restore_flags(flags);
+ } else {
+ // Nothing to do!
}
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if (filp->f_flags & O_NONBLOCK) {
- if (info->flags & ASYNC_CALLOUT_ACTIVE){
- return -EBUSY;
- }
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
+ return;
+} /* cy_stop */
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * cy_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttyC%d, count = %d\n",
- info->line, info->count);/**/
-#endif
- info->count--;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d(%d): decrementing count to %d\n", __LINE__, current->pid, info->count);
+
+static void
+cy_start(struct tty_struct *tty)
+{
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned char *base_addr;
+ int chip,channel,index;
+ unsigned long flags;
+
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_start ttyC%d\n", info->line); /* */
#endif
- info->blocked_open++;
+ if (serial_paranoia_check(info, tty->device, "cy_start"))
+ return;
+
cinfo = &cy_card[info->card];
channel = info->line - cinfo->first_line;
- chip = channel>>2;
- channel &= 0x03;
index = cinfo->bus_index;
- base_addr = (char *) (cinfo->base_addr + (cy_chip_offset[chip]<<index));
-
- while (1) {
- save_flags(flags); cli();
- if (!(info->flags & ASYNC_CALLOUT_ACTIVE)){
- base_addr[CyCAR<<index] = (u_char)channel;
- base_addr[CyMSVR1<<index] = CyRTS;
- base_addr[CyMSVR2<<index] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
-#endif
- }
- restore_flags(flags);
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp)
- || !(info->flags & ASYNC_INITIALIZED) ){
- if (info->flags & ASYNC_HUP_NOTIFY) {
- retval = -EAGAIN;
- }else{
- retval = -ERESTARTSYS;
- }
- break;
- }
- save_flags(flags); cli();
- base_addr[CyCAR<<index] = (u_char)channel;
- if (!(info->flags & ASYNC_CALLOUT_ACTIVE)
- && !(info->flags & ASYNC_CLOSING)
- && (C_CLOCAL(tty)
- || (base_addr[CyMSVR1<<index] & CyDCD))) {
- restore_flags(flags);
- break;
- }
- restore_flags(flags);
- if (current->signal & ~current->blocked) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttyC%d, count = %d\n",
- info->line, info->count);/**/
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp)){
- info->count++;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d(%d): incrementing count to %d\n", __LINE__, current->pid, info->count);
-#endif
+ if (!IS_CYC_Z(*cinfo)) {
+ chip = channel>>2;
+ channel &= 0x03;
+ base_addr = (unsigned char*)
+ (cy_card[info->card].base_addr
+ + (cy_chip_offset[chip]<<index));
+
+ save_flags(flags); cli();
+ cy_writeb((u_long)base_addr+(CyCAR<<index),
+ (u_char)(channel & 0x0003)); /* index channel */
+ cy_writeb((u_long)base_addr+(CySRER<<index),
+ cy_readb(base_addr+(CySRER<<index)) | CyTxMpty);
+ restore_flags(flags);
+ } else {
+ // Nothing to do!
}
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttyC%d, count = %d\n",
- info->line, info->count);/**/
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-} /* block_til_ready */
-/*
- * This routine is called whenever a serial port is opened. It
- * performs the serial-specific initialization for the tty structure.
- */
-int
-cy_open(struct tty_struct *tty, struct file * filp)
-{
- struct cyclades_port *info;
- int retval, line;
+ return;
+} /* cy_start */
- line = MINOR(tty->device) - tty->driver.minor_start;
- if ((line < 0) || (NR_PORTS <= line)){
- return -ENODEV;
- }
- info = &cy_port[line];
- if (info->line < 0){
- return -ENODEV;
- }
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_open ttyC%d\n", info->line); /* */
-#endif
- if (serial_paranoia_check(info, tty->device, "cy_open")){
- return -ENODEV;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open ttyC%d, count = %d\n", info->line, info->count);/**/
-#endif
- info->count++;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d(%d): incrementing count to %d\n", __LINE__, current->pid, info->count);
+
+static void
+cy_flush_buffer(struct tty_struct *tty)
+{
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, channel;
+ unsigned long flags;
+
+#ifdef CY_DEBUG_IO
+ printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */
#endif
- tty->driver_data = info;
- info->tty = tty;
- if (!tmp_buf) {
- tmp_buf = (unsigned char *) get_free_page(GFP_KERNEL);
- if (!tmp_buf){
- return -ENOMEM;
- }
- }
+ if (serial_paranoia_check(info, tty->device, "cy_flush_buffer"))
+ return;
+ save_flags(flags); cli();
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ restore_flags(flags);
+
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
- if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
- if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
- *tty->termios = info->normal_termios;
- else
- *tty->termios = info->callout_termios;
- }
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval){
- return retval;
+ if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board
+ buffers as well */
+ static volatile struct FIRM_ID *firm_id;
+ static volatile struct ZFW_CTRL *zfw_ctrl;
+ static volatile struct CH_CTRL *ch_ctrl;
+ static volatile struct BUF_CTRL *buf_ctrl;
+
+ firm_id = (struct FIRM_ID *)(cy_card[card].base_addr + ID_ADDRESS);
+ zfw_ctrl = (struct ZFW_CTRL *) (cy_card[card].base_addr +
+ cy_readl(&firm_id->zfwctrl_addr));
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
+
+ while (cy_readl(&buf_ctrl->tx_get) != cy_readl(&buf_ctrl->tx_put))
+ cy_writel(&buf_ctrl->tx_put, cy_readl(&buf_ctrl->tx_get));
}
+ wake_up_interruptible(&tty->write_wait);
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
+ && tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+} /* cy_flush_buffer */
- MOD_INC_USE_COUNT;
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open returning after block_til_ready with %d\n",
- retval);
+/*
+ * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void
+cy_hangup(struct tty_struct *tty)
+{
+ struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
+
+#ifdef CY_DEBUG_OTHER
+ printk("cyc:cy_hangup ttyC%d\n", info->line); /* */
#endif
- return retval;
- }
- info->session = current->session;
- info->pgrp = current->pgrp;
+ if (serial_paranoia_check(info, tty->device, "cy_hangup"))
+ return;
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open done\n");/**/
+ cy_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ info->count = 0;
+#ifdef CY_DEBUG_COUNT
+ printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid);
#endif
- return 0;
-} /* cy_open */
-
+ info->tty = 0;
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
+ wake_up_interruptible(&info->open_wait);
+} /* cy_hangup */
/*
@@ -2698,33 +4523,25 @@
* ---------------------------------------------------------------------
*/
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static void
-show_version(void)
-{
- printk("Cyclom driver %s\n",rcsid);
-} /* show_version */
-
-/* initialize chips on card -- return number of valid
+/* initialize chips on Cyclom-Y card -- return number of valid
chips (which is number of ports/4) */
-int
-cy_init_card(unsigned char *true_base_addr,int index)
+__initfunc(static unsigned short
+cyy_init_card(volatile ucchar *true_base_addr,int index))
{
unsigned int chip_number;
- unsigned char* base_addr;
+ volatile ucchar* base_addr;
- true_base_addr[Cy_HwReset<<index] = 0; /* Cy_HwReset is 0x1400 */
- true_base_addr[Cy_ClrIntr<<index] = 0; /* Cy_ClrIntr is 0x1800 */
+ cy_writeb((u_long)true_base_addr+(Cy_HwReset<<index), 0);
+ /* Cy_HwReset is 0x1400 */
+ cy_writeb((u_long)true_base_addr+(Cy_ClrIntr<<index), 0);
+ /* Cy_ClrIntr is 0x1800 */
udelay(500L);
- for(chip_number=0; chip_number<CyMaxChipsPerCard; chip_number++){
- base_addr = true_base_addr + (cy_chip_offset[chip_number]<<index);
+ for(chip_number=0; chip_number<CyMAX_CHIPS_PER_CARD; chip_number++){
+ base_addr = true_base_addr
+ + (cy_chip_offset[chip_number]<<index);
udelay(1000L);
- if(base_addr[CyCCR<<index] != 0x00){
+ if(cy_readb(base_addr+(CyCCR<<index)) != 0x00){
/*************
printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
chip_number, (unsigned long)base_addr);
@@ -2732,7 +4549,7 @@
return chip_number;
}
- base_addr[CyGFRCR<<index] = 0;
+ cy_writeb((u_long)base_addr+(CyGFRCR<<index), 0);
udelay(10L);
/* The Cyclom-16Y does not decode address bit 9 and therefore
@@ -2742,39 +4559,629 @@
and this must be a Cyclom-16Y, not a Cyclom-32Ye.
*/
if (chip_number == 4
- && *(true_base_addr + (cy_chip_offset[0]<<index) + (CyGFRCR<<index)) == 0){
- return chip_number;
+ && cy_readb(true_base_addr
+ + (cy_chip_offset[0]<<index)
+ + (CyGFRCR<<index)) == 0){
+ return chip_number;
}
- base_addr[CyCCR<<index] = CyCHIP_RESET;
+ cy_writeb((u_long)base_addr+(CyCCR<<index), CyCHIP_RESET);
udelay(1000L);
- if(base_addr[CyGFRCR<<index] == 0x00){
- /*
- printk(" chip #%d at %#6lx is not responding (GFRCR stayed 0)\n",
+ if(cy_readb(base_addr+(CyGFRCR<<index)) == 0x00){
+ /*
+ printk(" chip #%d at %#6lx is not responding ",
chip_number, (unsigned long)base_addr);
- */
+ printk("(GFRCR stayed 0)\n",
+ */
return chip_number;
}
- if((0xf0 & base_addr[CyGFRCR<<index]) != 0x40){
- /*
+ if((0xf0 & (cy_readb(base_addr+(CyGFRCR<<index)))) != 0x40){
+ /*
printk(" chip #%d at %#6lx is not valid (GFRCR == %#2x)\n",
- chip_number, (unsigned long)base_addr, base_addr[CyGFRCR<<index]);
- */
+ chip_number, (unsigned long)base_addr,
+ base_addr[CyGFRCR<<index]);
+ */
return chip_number;
}
- base_addr[CyGCR<<index] = CyCH0_SERIAL;
- base_addr[CyPPR<<index] = 244; /* better value than CyCLOCK_25_1MS * 5
- to run clock at 200 Hz */
+ cy_writeb((u_long)base_addr+(CyGCR<<index), CyCH0_SERIAL);
+ if (cy_readb(base_addr+(CyGFRCR<<index)) >= CD1400_REV_J){
+ /* It is a CD1400 rev. J or later */
+ /* Impossible to reach 5ms with this chip.
+ Changed to 2ms instead (f = 500 Hz). */
+ cy_writeb((u_long)base_addr+(CyPPR<<index), CyCLOCK_60_2MS);
+ } else {
+ /* f = 200 Hz */
+ cy_writeb((u_long)base_addr+(CyPPR<<index), CyCLOCK_25_5MS);
+ }
- /*
+ /*
printk(" chip #%d at %#6lx is rev 0x%2x\n",
- chip_number, (unsigned long)base_addr, base_addr[CyGFRCR<<index]);
- */
+ chip_number, (unsigned long)base_addr,
+ cy_readb(base_addr+(CyGFRCR<<index)));
+ */
}
-
return chip_number;
-} /* cy_init_card */
+} /* cyy_init_card */
+
+/*
+ * ---------------------------------------------------------------------
+ * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
+ * sets global variables and return the number of ISA boards found.
+ * ---------------------------------------------------------------------
+ */
+__initfunc(static int
+cy_detect_isa(void))
+{
+ unsigned short cy_isa_irq,nboard;
+ volatile ucchar *cy_isa_address;
+ unsigned short i,j,cy_isa_nchan;
+
+ nboard = 0;
+
+ /* scan the address table probing for Cyclom-Y/ISA boards */
+ for (i = 0 ; i < NR_ISA_ADDRS ; i++) {
+ cy_isa_address = cy_isa_addresses[i];
+ if (cy_isa_address == 0x0000) {
+ return(nboard);
+ }
+
+ /* probe for CD1400... */
+
+ cy_isa_nchan = CyPORTS_PER_CHIP *
+ cyy_init_card(cy_isa_address,0);
+ if (cy_isa_nchan == 0) {
+ continue;
+ }
+
+ /* find out the board's irq by probing */
+ cy_isa_irq = do_auto_irq(cy_isa_address);
+ if (cy_isa_irq == 0) {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long) cy_isa_address);
+ printk("but the IRQ could not be detected.\n");
+ continue;
+ }
+
+ if((cy_next_channel+cy_isa_nchan) > NR_PORTS) {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long) cy_isa_address);
+ printk("but no more channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
+ return(nboard);
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0 ; j < NR_CARDS ; j++) {
+ if (cy_card[j].base_addr == 0) break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long) cy_isa_address);
+ printk("but no more cards can be used .\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ return(nboard);
+ }
+
+ /* allocate IRQ */
+ if(request_irq(cy_isa_irq, cyy_interrupt,
+ SA_INTERRUPT, "cyclomY", NULL))
+ {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long) cy_isa_address);
+ printk("but could not allocate IRQ#%d.\n",
+ cy_isa_irq);
+ return(nboard);
+ }
+
+ /* set cy_card */
+ cy_card[j].base_addr = (u_long) cy_isa_address;
+ cy_card[j].ctl_addr = 0;
+ cy_card[j].irq = (int) cy_isa_irq;
+ cy_card[j].bus_index = 0;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = cy_isa_nchan/4;
+ IRQ_cards[cy_isa_irq] = &cy_card[j];
+ nboard++;
+
+ /* print message */
+ printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j+1, (unsigned long) cy_isa_address,
+ (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
+ cy_isa_irq);
+ printk("%d channels starting from port %d.\n",
+ cy_isa_nchan, cy_next_channel);
+ cy_next_channel += cy_isa_nchan;
+ }
+ return(nboard);
+
+} /* cy_detect_isa */
+
+/*
+ * ---------------------------------------------------------------------
+ * cy_detect_pci() - Test PCI bus presence and Cyclom-Ye/PCI.
+ * sets global variables and return the number of PCI boards found.
+ * ---------------------------------------------------------------------
+ */
+__initfunc(static int
+cy_detect_pci(void))
+{
+#ifdef CONFIG_PCI
+ unsigned char cyy_bus, cyy_dev_fn, cyy_rev_id;
+ unsigned long pci_intr_ctrl;
+ unsigned char cy_pci_irq;
+ uclong cy_pci_addr0, cy_pci_addr1, cy_pci_addr2;
+ unsigned short i,j,cy_pci_nchan, plx_ver;
+ unsigned short device_id,dev_index = 0,board_index = 0;
+ uclong mailbox;
+ uclong Ze_addr0[NR_CARDS], Ze_addr2[NR_CARDS], ZeIndex = 0;
+
+ if(pcibios_present() == 0) { /* PCI bus not present */
+ return(0);
+ }
+ for (i = 0; i < NR_CARDS; i++) {
+ /* look for a Cyclades card by vendor and device id */
+ while((device_id = cy_pci_dev_id[dev_index]) != 0) {
+ if(pcibios_find_device(PCI_VENDOR_ID_CYCLADES,
+ device_id,board_index,
+ &cyy_bus, &cyy_dev_fn) != 0)
+ {
+ dev_index++; /* try next device id */
+ board_index = 0;
+ } else {
+ board_index++;
+ break; /* found a board */
+ }
+ }
+
+ if (device_id == 0)
+ break;
+
+ /* read PCI configuration area */
+ pcibios_read_config_byte(cyy_bus, cyy_dev_fn,
+ PCI_INTERRUPT_LINE, &cy_pci_irq);
+ pcibios_read_config_dword(cyy_bus, cyy_dev_fn,
+ PCI_BASE_ADDRESS_0,
+ (unsigned int *) &cy_pci_addr0);
+ pcibios_read_config_dword(cyy_bus, cyy_dev_fn,
+ PCI_BASE_ADDRESS_1,
+ (unsigned int *) &cy_pci_addr1);
+ pcibios_read_config_dword(cyy_bus, cyy_dev_fn,
+ PCI_BASE_ADDRESS_2,
+ (unsigned int *) &cy_pci_addr2);
+ pcibios_read_config_byte(cyy_bus, cyy_dev_fn,
+ PCI_REVISION_ID, &cyy_rev_id);
+
+ if ((device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo)
+ || (device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi)){
+#ifdef CY_PCI_DEBUG
+ printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
+ cyy_bus, cyy_dev_fn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclom-Y/PCI:found winaddr=0x%lx ioaddr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr1);
+#endif
+ cy_pci_addr1 &= PCI_BASE_ADDRESS_IO_MASK;
+ cy_pci_addr2 &= PCI_BASE_ADDRESS_MEM_MASK;
+
+#if defined(__alpha__)
+ if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
+ printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
+ cyy_bus, cyy_dev_fn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclom-Y/PCI:found winaddr=0x%lx ioaddr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr1);
+ printk("Cyclom-Y/PCI not supported for low addresses in "
+ "Alpha systems.\n");
+ i--;
+ continue;
+ }
+#else
+ if ((ulong)cy_pci_addr2 >= 0x100000) /* above 1M? */
+ cy_pci_addr2 = (ulong) ioremap(cy_pci_addr2, CyPCI_Ywin);
+#endif
+
+#ifdef CY_PCI_DEBUG
+ printk("Cyclom-Y/PCI: relocate winaddr=0x%lx ioaddr=0x%lx\n",
+ (u_long)cy_pci_addr2, (u_long)cy_pci_addr1);
+#endif
+ cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP *
+ cyy_init_card((volatile ucchar *)cy_pci_addr2, 1));
+ if(cy_pci_nchan == 0) {
+ printk("Cyclom-Y PCI host card with ");
+ printk("no Serial-Modules at 0x%lx.\n",
+ (ulong) cy_pci_addr2);
+ i--;
+ continue;
+ }
+ if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_addr2);
+ printk("but no channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0 ; j < NR_CARDS ; j++) {
+ if (cy_card[j].base_addr == 0) break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_addr2);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+
+ /* allocate IRQ */
+ if(request_irq(cy_pci_irq, cyy_interrupt,
+ SA_INTERRUPT, "cyclomY", NULL))
+ {
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_addr2);
+ printk("but could not allocate IRQ%d.\n",
+ cy_pci_irq);
+ return(i);
+ }
+
+ /* set cy_card */
+ cy_card[j].base_addr = (ulong)cy_pci_addr2;
+ cy_card[j].ctl_addr = 0;
+ cy_card[j].irq = (int) cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = cy_pci_nchan/4;
+ IRQ_cards[cy_pci_irq] = &cy_card[j];
+
+ /* enable interrupts in the PCI interface */
+ plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f;
+ switch (plx_ver) {
+ case PLX_9050:
+
+ outw(inw(cy_pci_addr1+0x4c)|0x0040,cy_pci_addr1+0x4c);
+ pci_intr_ctrl = (unsigned long)
+ (inw(cy_pci_addr1+0x4c)
+ | inw(cy_pci_addr1+0x4e)<<16);
+ break;
+
+ case PLX_9060:
+ case PLX_9080:
+ default: /* Old boards, use PLX_9060 */
+
+ outw(inw(cy_pci_addr1+0x68)|0x0900,cy_pci_addr1+0x68);
+ pci_intr_ctrl = (unsigned long)
+ (inw(cy_pci_addr1+0x68)
+ | inw(cy_pci_addr1+0x6a)<<16);
+ break;
+ }
+
+ /* print message */
+ printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j+1,
+ (ulong)cy_pci_addr2,
+ (ulong)(cy_pci_addr2 + CyPCI_Ywin - 1),
+ (int)cy_pci_irq);
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan, cy_next_channel);
+
+ cy_next_channel += cy_pci_nchan;
+ }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo){
+ /* print message */
+ printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
+ cyy_bus, cyy_dev_fn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
+ printk("Cyclades-Z/PCI not supported for low addresses\n");
+ break;
+ }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi){
+#ifdef CY_PCI_DEBUG
+ printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
+ cyy_bus, cyy_dev_fn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
+#endif
+ cy_pci_addr0 &= PCI_BASE_ADDRESS_MEM_MASK;
+#if !defined(__alpha__)
+ cy_pci_addr0 = (unsigned int) ioremap(
+ cy_pci_addr0 & PAGE_MASK,
+ PAGE_ALIGN(CyPCI_Zctl))
+ + (cy_pci_addr0 & (PAGE_SIZE-1));
+#endif
+ mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 *)
+ cy_pci_addr0)->mail_box_0);
+ cy_pci_addr2 &= PCI_BASE_ADDRESS_MEM_MASK;
+ if (mailbox == ZE_V1) {
+#if !defined(__alpha__)
+ cy_pci_addr2 = (unsigned int) ioremap(
+ cy_pci_addr2 & PAGE_MASK,
+ PAGE_ALIGN(CyPCI_Ze_win))
+ + (cy_pci_addr2 & (PAGE_SIZE-1));
+#endif
+ if (ZeIndex == NR_CARDS) {
+ printk("Cyclades-Ze/PCI found at 0x%lx ",
+ (ulong)cy_pci_addr2);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ } else {
+ Ze_addr0[ZeIndex] = cy_pci_addr0;
+ Ze_addr2[ZeIndex] = cy_pci_addr2;
+ ZeIndex++;
+ }
+ i--;
+ continue;
+ } else {
+#if !defined(__alpha__)
+ cy_pci_addr2 = (unsigned int) ioremap(
+ cy_pci_addr2 & PAGE_MASK,
+ PAGE_ALIGN(CyPCI_Zwin))
+ + (cy_pci_addr2 & (PAGE_SIZE-1));
+#endif
+ }
+
+#ifdef CY_PCI_DEBUG
+ printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
+ if (mailbox == ZO_V1) {
+ cy_writel(&((struct RUNTIME_9060 *)
+ (cy_pci_addr0))->loc_addr_base, WIN_CREG);
+ PAUSE
+ printk("Cyclades-8Zo/PCI: FPGA id %lx, ver %lx\n",
+ (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *)
+ (cy_pci_addr2))->fpga_id)),
+ (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *)
+ (cy_pci_addr2))->fpga_version)));
+ cy_writel(&((struct RUNTIME_9060 *)
+ (cy_pci_addr0))->loc_addr_base, WIN_RAM);
+ } else {
+ printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n");
+ }
+#endif
+ /* The following clears the firmware id word. This ensures
+ that the driver will not attempt to talk to the board
+ until it has been properly initialized.
+ */
+ PAUSE
+ if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
+ cy_writel((ulong)(cy_pci_addr2+ID_ADDRESS), 0L);
+
+ /* This must be a Cyclades-8Zo/PCI. The extendable
+ version will have a different device_id and will
+ be allocated its maximum number of ports. */
+ cy_pci_nchan = 8;
+
+ if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclades-8Zo/PCI found at 0x%lx ",
+ (ulong)cy_pci_addr2);
+ printk("but no channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+
+ /* fill the next cy_card structure available */
+ for (j = 0 ; j < NR_CARDS ; j++) {
+ if (cy_card[j].base_addr == 0) break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclades-8Zo/PCI found at 0x%lx ",
+ (ulong)cy_pci_addr2);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+
+ /* allocate IRQ only if board has an IRQ */
+ if( (1 < cy_pci_irq) && (cy_pci_irq < 15) ) {
+ if(request_irq(cy_pci_irq,cyz_interrupt,
+ SA_INTERRUPT,"cyclomZ",NULL))
+ {
+ printk("Could not allocate IRQ%d ",
+ cy_pci_irq);
+ printk("for Cyclades-8Zo/PCI at 0x%lx.\n",
+ (ulong)cy_pci_addr2);
+ return(i);
+ }
+ }
+
+
+ /* set cy_card */
+ cy_card[j].base_addr = cy_pci_addr2;
+ cy_card[j].ctl_addr = cy_pci_addr0;
+ cy_card[j].irq = (int) cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = -1;
+ IRQ_cards[cy_pci_irq] = &cy_card[j];
+
+ /* print message */
+ /* don't report IRQ if board is no IRQ */
+ if( (cy_pci_irq < 15) && (cy_pci_irq > 1) ) {
+ printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j+1,(ulong)cy_pci_addr2,
+ (ulong)(cy_pci_addr2 + CyPCI_Zwin - 1),
+ (int)cy_pci_irq);
+ }else{
+ printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ",
+ j+1,(ulong)cy_pci_addr2,
+ (ulong)(cy_pci_addr2 + CyPCI_Zwin - 1));
+ }
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan,cy_next_channel);
+ cy_next_channel += cy_pci_nchan;
+ }
+ }
+
+ for (; ZeIndex != 0 && i < NR_CARDS; i++) {
+ cy_pci_addr0 = Ze_addr0[0];
+ cy_pci_addr2 = Ze_addr2[0];
+ for (j = 0 ; j < ZeIndex-1 ; j++) {
+ Ze_addr0[j] = Ze_addr0[j+1];
+ Ze_addr2[j] = Ze_addr2[j+1];
+ }
+ ZeIndex--;
+ mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 *)
+ cy_pci_addr0)->mail_box_0);
+#ifdef CY_PCI_DEBUG
+ printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
+ printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n");
+#endif
+ /* The following clears the firmware id word. This ensures
+ that the driver will not attempt to talk to the board
+ until it has been properly initialized.
+ */
+ PAUSE
+ /* This must be the new Cyclades-Ze/PCI. */
+ cy_pci_nchan = ZE_V1_NPORTS;
+
+ if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclades-Ze/PCI found at 0x%lx ",
+ (ulong)cy_pci_addr2);
+ printk("but no channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+
+ /* fill the next cy_card structure available */
+ for (j = 0 ; j < NR_CARDS ; j++) {
+ if (cy_card[j].base_addr == 0) break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclades-Ze/PCI found at 0x%lx ",
+ (ulong)cy_pci_addr2);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ return(i);
+ }
+
+ /* allocate IRQ only if board has an IRQ */
+ if( (1 < cy_pci_irq) && (cy_pci_irq < 15) ) {
+ if(request_irq(cy_pci_irq,cyz_interrupt,
+ SA_INTERRUPT,"cyclomZ",NULL))
+ {
+ printk("Could not allocate IRQ%d ",
+ cy_pci_irq);
+ printk("for Cyclades-Ze/PCI at 0x%lx.\n",
+ (ulong) cy_pci_addr2);
+ return(i);
+ }
+ }
+
+ /* set cy_card */
+ cy_card[j].base_addr = cy_pci_addr2;
+ cy_card[j].ctl_addr = cy_pci_addr0;
+ cy_card[j].irq = (int) cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = -1;
+ IRQ_cards[cy_pci_irq] = &cy_card[j];
+
+ /* print message */
+ /* don't report IRQ if board is no IRQ */
+ if( (cy_pci_irq < 15) && (cy_pci_irq > 1) ) {
+ printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j+1,(ulong)cy_pci_addr2,
+ (ulong)(cy_pci_addr2 + CyPCI_Ze_win - 1),
+ (int)cy_pci_irq);
+ }else{
+ printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ",
+ j+1,(ulong)cy_pci_addr2,
+ (ulong)(cy_pci_addr2 + CyPCI_Ze_win - 1));
+ }
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan,cy_next_channel);
+ cy_next_channel += cy_pci_nchan;
+ }
+ if (ZeIndex != 0) {
+ printk("Cyclades-Ze/PCI found at 0x%x ",
+ (unsigned int) Ze_addr2[0]);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ }
+ return(i);
+#else
+ return(0);
+#endif /* ifdef CONFIG_PCI */
+} /* cy_detect_pci */
+
+
+/*
+ * This routine prints out the appropriate serial driver version number
+ * and identifies which options were configured into this driver.
+ */
+static inline void
+show_version(void)
+{
+ char *rcsvers, *rcsdate, *tmp;
+ rcsvers = strchr(rcsid, ' '); rcsvers++;
+ tmp = strchr(rcsvers, ' '); *tmp++ = '\0';
+ rcsdate = strchr(tmp, ' '); rcsdate++;
+ tmp = strrchr(rcsdate, ' '); *tmp = '\0';
+ printk("Cyclades driver %s %s\n",
+ rcsvers, rcsdate);
+ printk(" built %s %s\n",
+ __DATE__, __TIME__);
+} /* show_version */
+
+#if defined(CONFIG_PROC_FS) && !defined(MODULE)
+int cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
+ int dummy)
+{
+ struct cyclades_port *info;
+ int i;
+ int len=0;
+ off_t begin=0;
+ off_t pos=0;
+ int size;
+ __u32 cur_jifs = jiffies;
+
+ size = sprintf(buf+len, "Dev TimeOpen BytesOut IdleOut BytesIn IdleIn Overruns Ldisc\n");
+
+ len += size;
+ pos += size;
+
+ /* Output one line for each known port */
+ for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) {
+ info = &cy_port[i];
+
+ if (info->count)
+ size = sprintf(buf+len,
+ "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6d\n",
+ info->line,
+ JIFFIES_DIFF(info->idle_stats.in_use, cur_jifs) / HZ,
+ info->idle_stats.xmit_bytes,
+ JIFFIES_DIFF(info->idle_stats.xmit_idle, cur_jifs) / HZ,
+ info->idle_stats.recv_bytes,
+ JIFFIES_DIFF(info->idle_stats.recv_idle, cur_jifs) / HZ,
+ info->idle_stats.overruns,
+ info->tty->ldisc.num);
+ else
+ size = sprintf(buf+len,
+ "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6ld\n",
+ info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
+ len += size;
+ pos = begin + len;
+
+ if (pos < offset) {
+ len = 0;
+ begin = pos;
+ }
+ if (pos > offset + length)
+ break;
+ }
+
+ *start = buf + (offset - begin); /* Start of wanted data */
+ len -= (offset - begin); /* Start slop */
+ if (len > length)
+ len = length; /* Ending slop */
+ return len;
+}
+#endif
+
/* The serial driver boot-time initialization code!
Hardware I/O ports are mapped to character special devices on a
@@ -2789,15 +5196,21 @@
device driver because the Cyclom is more properly a multiplexer,
not just an aggregation of serial ports on one card.
- If there are more cards with more ports than have been statically
- allocated above, a warning is printed and the extra ports are ignored.
+ If there are more cards with more ports than have been
+ statically allocated above, a warning is printed and the
+ extra ports are ignored.
*/
-int
-cy_init(void)
+
+__initfunc(int
+cy_init(void))
{
- struct cyclades_port *info;
+ struct cyclades_port *info;
struct cyclades_card *cinfo;
- int board,port,i;
+ int number_z_boards = 0;
+ int board,port,i,index;
+ unsigned long mailbox;
+ unsigned short chip_number;
+ int nports;
show_version();
@@ -2813,7 +5226,7 @@
cy_serial_driver.subtype = SERIAL_TYPE_NORMAL;
cy_serial_driver.init_termios = tty_std_termios;
cy_serial_driver.init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
cy_serial_driver.flags = TTY_DRIVER_REAL_RAW;
cy_serial_driver.refcount = &serial_refcount;
cy_serial_driver.table = serial_table;
@@ -2845,31 +5258,31 @@
cy_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
if (tty_register_driver(&cy_serial_driver))
- panic("Couldn't register Cyclom serial driver\n");
+ panic("Couldn't register Cyclades serial driver\n");
if (tty_register_driver(&cy_callout_driver))
- panic("Couldn't register Cyclom callout driver\n");
+ panic("Couldn't register Cyclades callout driver\n");
init_bh(CYCLADES_BH, do_cyclades_bh);
for (i = 0; i < 16; i++) {
- IRQ_cards[i] = 0;
+ IRQ_cards[i] = 0;
}
for (i = 0; i < NR_CARDS; i++) {
- /* base_addr=0 indicates board not found */
- cy_card[i].base_addr = 0;
+ /* base_addr=0 indicates board not found */
+ cy_card[i].base_addr = 0;
}
/* the code below is responsible to find the boards. Each different
type of board has its own detection routine. If a board is found,
the next cy_card structure available is set by the detection
- routine. These functions are responsible for checking the availability
- of cy_card and cy_port data structures and updating the
- cy_next_channel. */
+ routine. These functions are responsible for checking the
+ availability of cy_card and cy_port data structures and updating
+ the cy_next_channel. */
/* look for isa boards */
cy_isa_nboard = cy_detect_isa();
-
+
/* look for pci boards */
cy_pci_nboard = cy_detect_pci();
@@ -2877,288 +5290,229 @@
/* invalidate remaining cy_card structures */
for (i = 0 ; i < NR_CARDS ; i++) {
- if (cy_card[i].base_addr == 0) {
- cy_card[i].first_line = -1;
- }
+ if (cy_card[i].base_addr == 0) {
+ cy_card[i].first_line = -1;
+ cy_card[i].ctl_addr = 0;
+ cy_card[i].irq = 0;
+ cy_card[i].bus_index = 0;
+ cy_card[i].first_line = 0;
+ cy_card[i].num_chips = 0;
+ }
}
/* invalidate remaining cy_port structures */
for (i = cy_next_channel ; i < NR_PORTS ; i++) {
- cy_port[i].line = -1;
- cy_port[i].magic = -1;
+ cy_port[i].line = -1;
+ cy_port[i].magic = -1;
}
/* initialize per-port data structures for each valid board found */
for (board = 0 ; board < cy_nboard ; board++) {
- cinfo = &cy_card[board];
- for (port = cinfo->first_line ;
- port < cinfo->first_line + 4*cinfo->num_chips ;
- port++)
- {
- info = &cy_port[port];
- info->magic = CYCLADES_MAGIC;
- info->type = PORT_CIRRUS;
- info->card = board;
- info->line = port;
- info->flags = STD_COM_FLAGS;
- info->tty = 0;
- info->xmit_fifo_size = 12;
- info->cor1 = CyPARITY_NONE|Cy_1_STOP|Cy_8_BITS;
- info->cor2 = CyETC;
- info->cor3 = 0x08; /* _very_ small receive threshold */
- info->cor4 = 0;
- info->cor5 = 0;
- info->tbpr = baud_bpr[13]; /* Tx BPR */
- info->tco = baud_co[13]; /* Tx CO */
- info->rbpr = baud_bpr[13]; /* Rx BPR */
- info->rco = baud_co[13]; /* Rx CO */
- info->close_delay = 0;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
- info->blocked_open = 0;
- info->default_threshold = 0;
- info->default_timeout = 0;
- info->tqueue.routine = do_softint;
- info->tqueue.data = info;
- info->callout_termios =cy_callout_driver.init_termios;
- info->normal_termios = cy_serial_driver.init_termios;
- info->open_wait = 0;
- info->close_wait = 0;
- /* info->session */
- /* info->pgrp */
- info->read_status_mask = CyTIMEOUT| CySPECHAR| CyBREAK
- | CyPARITY| CyFRAME| CyOVERRUN;
- /* info->timeout */
- }
+ cinfo = &cy_card[board];
+ if (cinfo->num_chips == -1){ /* Cyclades-Z */
+ number_z_boards++;
+ mailbox = cy_readl(&((struct RUNTIME_9060 *)
+ cy_card[board].ctl_addr)->mail_box_0);
+ nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
+ for (port = cinfo->first_line ;
+ port < cinfo->first_line + nports;
+ port++)
+ {
+ info = &cy_port[port];
+ info->magic = CYCLADES_MAGIC;
+ info->type = PORT_STARTECH;
+ info->card = board;
+ info->line = port;
+ info->chip_rev = 0;
+ info->flags = STD_COM_FLAGS;
+ info->tty = 0;
+ if (mailbox == ZO_V1)
+ info->xmit_fifo_size = CYZ_FIFO_SIZE;
+ else
+ info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
+ info->cor1 = 0;
+ info->cor2 = 0;
+ info->cor3 = 0;
+ info->cor4 = 0;
+ info->cor5 = 0;
+ info->tbpr = 0;
+ info->tco = 0;
+ info->rbpr = 0;
+ info->rco = 0;
+ info->close_delay = 5*HZ/10;
+ info->closing_wait = CLOSING_WAIT_DELAY;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+#ifdef CY_DEBUG_COUNT
+// printk("cyc:cy_init(1) setting Z count to 0\n");
+#endif
+ info->blocked_open = 0;
+ info->default_threshold = 0;
+ info->default_timeout = 0;
+ info->tqueue.routine = do_softint;
+ info->tqueue.data = info;
+ info->callout_termios =
+ cy_callout_driver.init_termios;
+ info->normal_termios =
+ cy_serial_driver.init_termios;
+ info->open_wait = 0;
+ info->close_wait = 0;
+ info->shutdown_wait = 0;
+ /* info->session */
+ /* info->pgrp */
+ info->read_status_mask = 0;
+ /* info->timeout */
+ /* Bentson's vars */
+ info->jiffies[0] = 0;
+ info->jiffies[1] = 0;
+ info->jiffies[2] = 0;
+ info->rflush_count = 0;
+ }
+ continue;
+ }else{ /* Cyclom-Y of some kind*/
+ index = cinfo->bus_index;
+ for (port = cinfo->first_line ;
+ port < cinfo->first_line + 4*cinfo->num_chips ;
+ port++)
+ {
+ info = &cy_port[port];
+ info->magic = CYCLADES_MAGIC;
+ info->type = PORT_CIRRUS;
+ info->card = board;
+ info->line = port;
+ info->flags = STD_COM_FLAGS;
+ info->tty = 0;
+ info->xmit_fifo_size = CyMAX_CHAR_FIFO;
+ info->cor1 = CyPARITY_NONE|Cy_1_STOP|Cy_8_BITS;
+ info->cor2 = CyETC;
+ info->cor3 = 0x08; /* _very_ small rcv threshold */
+ info->cor4 = 0;
+ info->cor5 = 0;
+ info->close_delay = 5*HZ/10;
+ info->closing_wait = CLOSING_WAIT_DELAY;
+ chip_number = (port - cinfo->first_line) / 4;
+ if ((info->chip_rev = cy_readb(cinfo->base_addr +
+ (cy_chip_offset[chip_number]<<index) +
+ (CyGFRCR<<index))) >= CD1400_REV_J) {
+ /* It is a CD1400 rev. J or later */
+ info->tbpr = baud_bpr_60[13]; /* Tx BPR */
+ info->tco = baud_co_60[13]; /* Tx CO */
+ info->rbpr = baud_bpr_60[13]; /* Rx BPR */
+ info->rco = baud_co_60[13]; /* Rx CO */
+ info->rflow = 0;
+ info->rtsdtr_inv = 1;
+ } else {
+ info->tbpr = baud_bpr_25[13]; /* Tx BPR */
+ info->tco = baud_co_25[13]; /* Tx CO */
+ info->rbpr = baud_bpr_25[13]; /* Rx BPR */
+ info->rco = baud_co_25[13]; /* Rx CO */
+ info->rflow = 0;
+ info->rtsdtr_inv = 0;
+ }
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+#ifdef CY_DEBUG_COUNT
+// printk("cyc:cy_init(2) setting Y count to 0\n");
+#endif
+ info->blocked_open = 0;
+ info->default_threshold = 0;
+ info->default_timeout = 0;
+ info->tqueue.routine = do_softint;
+ info->tqueue.data = info;
+ info->callout_termios =
+ cy_callout_driver.init_termios;
+ info->normal_termios =
+ cy_serial_driver.init_termios;
+ info->open_wait = 0;
+ info->close_wait = 0;
+ info->shutdown_wait = 0;
+ /* info->session */
+ /* info->pgrp */
+ info->read_status_mask =
+ CyTIMEOUT| CySPECHAR| CyBREAK
+ | CyPARITY| CyFRAME| CyOVERRUN;
+ /* info->timeout */
+ }
+ }
+ }
+
+ if ( number_z_boards && !cyz_timeron){
+ cyz_timeron++;
+ cyz_timerlist.expires = jiffies + 1;
+ add_timer(&cyz_timerlist);
+#ifdef CY_PCI_DEBUG
+ printk("Cyclades-Z polling initialized\n");
+#endif
}
+
+#if defined(CONFIG_PROC_FS) && !defined(MODULE)
+ proc_register_dynamic(&proc_root, &cyclades_proc_entry);
+#endif
+
return 0;
} /* cy_init */
#ifdef MODULE
+/* See linux/drivers/char/riscom.c for ideas on how to
+ pass additional base addresses to the driver!!! */
int
init_module(void)
{
return(cy_init());
-}
+} /* init_module */
void
cleanup_module(void)
{
int i;
+ unsigned long flags;
+
+ if (cyz_timeron){
+ cyz_timeron = 0;
+ del_timer(&cyz_timerlist);
+ }
+ save_flags(flags); cli();
+ free_page((unsigned long)tmp_buf);
if (tty_unregister_driver(&cy_callout_driver))
- printk("Couldn't unregister Cyclom callout driver\n");
+ printk("Couldn't unregister Cyclades callout driver\n");
if (tty_unregister_driver(&cy_serial_driver))
- printk("Couldn't unregister Cyclom serial driver\n");
+ printk("Couldn't unregister Cyclades serial driver\n");
+
+ restore_flags(flags);
for (i = 0; i < NR_CARDS; i++) {
- if (cy_card[i].base_addr != 0)
- {
- free_irq(cy_card[i].irq,NULL);
- }
+ if (cy_card[i].base_addr != 0
+ && cy_card[i].irq)
+ {
+ free_irq(cy_card[i].irq,NULL);
+ }
}
-}
-#endif
-
-/*
- * ---------------------------------------------------------------------
- * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
- * sets global variables and return the number of ISA boards found.
- * ---------------------------------------------------------------------
- */
-int
-cy_detect_isa()
-{
- unsigned int cy_isa_irq,nboard;
- unsigned char *cy_isa_address;
- unsigned short i,j,cy_isa_nchan;
-
- nboard = 0;
-
- /* scan the address table probing for Cyclom-Y/ISA boards */
- for (i = 0 ; i < NR_ISA_ADDRESSES ; i++) {
- cy_isa_address = cy_isa_addresses[i];
- if (cy_isa_address == 0x0000) {
- return(nboard);
- }
-
- /* probe for CD1400... */
- cy_isa_nchan = 4 * cy_init_card(cy_isa_address,0);
- if (cy_isa_nchan == 0) {
- continue;
- }
-
- /* find out the board's irq by probing */
- cy_isa_irq = do_auto_irq(cy_isa_address);
- if (cy_isa_irq == 0) {
- printk("Cyclom-Y/ISA found at 0x%x but the IRQ could not be detected.\n",
- (unsigned int) cy_isa_address);
- continue;
- }
-
- if((cy_next_channel+cy_isa_nchan) > NR_PORTS) {
- printk("Cyclom-Y/ISA found at 0x%x but no more channel structures are available.\n",
- (unsigned int) cy_isa_address);
- return(nboard);
- }
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/ISA found at 0x%x but no more card structures are available.\n",
- (unsigned int) cy_isa_address);
- return(nboard);
- }
-
- /* allocate IRQ */
- if(request_irq(cy_isa_irq,cy_interrupt,SA_INTERRUPT,"cyclades",NULL))
- {
- printk("Cyclom-Y/ISA found at 0x%x but could not allocate interrupt IRQ#%d.\n",
- (unsigned int) cy_isa_address,cy_isa_irq);
- return(nboard);
- }
-
- /* set cy_card */
- cy_card[j].base_addr = (int) cy_isa_address;
- cy_card[j].irq = (int) cy_isa_irq;
- cy_card[j].bus_index = 0;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan/4;
- IRQ_cards[cy_isa_irq] = &cy_card[j];
- nboard++;
-
- /* print message */
- printk("Cyclom-Y/ISA #%d: 0x%x-0x%x, IRQ%d, %d channels starting from port %d.\n",
- j+1,(unsigned int) cy_isa_address,
- (unsigned int)(cy_isa_address + 0x1fff),
- cy_isa_irq,cy_isa_nchan,cy_next_channel);
- cy_next_channel += cy_isa_nchan;
- }
- return(nboard);
-
-}
-
-/*
- * ---------------------------------------------------------------------
- * cy_detect_pci() - Test PCI bus presence and Cyclom-Ye/PCI.
- * sets global variables and return the number of PCI boards found.
- * ---------------------------------------------------------------------
- */
-int
-cy_detect_pci()
+} /* cleanup_module */
+#else
+/* called by linux/init/main.c to parse command line options */
+void
+cy_setup(char *str, int *ints)
{
-#ifdef CONFIG_PCI
- unsigned char cyy_bus, cyy_dev_fn, cyy_rev_id;
- unsigned long pci_intr_ctrl;
- unsigned char cy_pci_irq;
- unsigned int cy_pci_address, cy_pci_io;
- unsigned short i,j,cy_pci_nchan;
- unsigned short device_id,dev_index = 0,board_index = 0;
-
- if(pcibios_present() == 0) { /* PCI bus not present */
- return(0);
- }
- for (i = 0; i < NR_CARDS; i++) {
- /* look for a Cyclom-Y card by vendor and device id */
- while((device_id = cy_pci_dev_id[dev_index]) != 0) {
- if(pcibios_find_device(PCI_VENDOR_ID_CYCLADES,
- device_id,board_index,
- &cyy_bus, &cyy_dev_fn) != 0)
- {
- dev_index++; /* try next device id */
- board_index = 0;
- } else {
- board_index++;
- break; /* found a board */
- }
- }
- if (device_id == 0) break;
-
- /* read PCI configuration area */
- pcibios_read_config_byte(cyy_bus, cyy_dev_fn,
- PCI_INTERRUPT_LINE, &cy_pci_irq);
- pcibios_read_config_dword(cyy_bus, cyy_dev_fn,
- PCI_BASE_ADDRESS_1, &cy_pci_io);
- pcibios_read_config_dword(cyy_bus, cyy_dev_fn,
- PCI_BASE_ADDRESS_2, &cy_pci_address);
- pcibios_read_config_byte(cyy_bus, cyy_dev_fn,
- PCI_REVISION_ID, &cyy_rev_id);
- cy_pci_address &= 0xfffffff0;
- if ((ulong)cy_pci_address >= 0x100000) { /* above 1M? */
- cy_pci_address =
- (unsigned int) vremap(cy_pci_address,0x4000);
- }
- cy_pci_io &= 0xfffffffc;
- cy_pci_nchan = 4 * cy_init_card((unsigned char *)
- cy_pci_address,1);
- if(cy_pci_nchan == 0) {
- printk("Cyclom-Y PCI host card with no Serial-Modules at 0x%x.\n",
- (unsigned int) cy_pci_address);
- continue;
- }
- if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
- printk("Cyclom-Y/PCI found at 0x%x but no more channel structures are available.\n",
- (unsigned int) cy_pci_address);
- return(i);
- }
-#ifdef CY_PCI_DEBUG
- printk("Cyclom-Ye/PCI #%d (bus=0x0%x, pci_id=0x%x, rev_id=%d).\n",
- i+1,cyy_bus,cyy_dev_fn,cyy_rev_id);
- printk("Cyclom-Ye/PCI: found at 0x%x, IRQ%d, ioaddr = 0x%lx.\n",
- cy_pci_address,(int)cy_pci_irq,cy_pci_io);
-#endif
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/PCI found at 0x%x but no more card structures are available.\n",
- (unsigned int) cy_pci_address);
- return(i);
- }
-
- /* allocate IRQ */
- if(request_irq(cy_pci_irq,cy_interrupt,SA_INTERRUPT,"cyclades",NULL))
- {
- printk("Cyclom-Y/PCI found at 0x%x but could not allocate interrupt IRQ%d.\n",
- (unsigned int) cy_pci_address,cy_pci_irq);
- return(i);
- }
+ int i, j;
- /* set cy_card */
- cy_card[j].base_addr = (int) cy_pci_address;
- cy_card[j].irq = (int) cy_pci_irq;
- cy_card[j].bus_index = 1;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_pci_nchan/4;
- IRQ_cards[cy_pci_irq] = &cy_card[j];
-
- /* enable interrupts in the PCI interface */
- outw(inw(cy_pci_io+0x68)|0x0900,cy_pci_io+0x68);
- pci_intr_ctrl = (unsigned long)(inw(cy_pci_io+0x68) | inw(cy_pci_io+0x6a)<<16);
-
- /* print message */
- printk("Cyclom-Y/PCI #%d: 0x%x-0x%x, IRQ%d, %d channels starting from port %d.\n",
- j+1,(unsigned int) cy_pci_address,
- (unsigned int)(cy_pci_address + 0x3fff),
- (int)cy_pci_irq,cy_pci_nchan,cy_next_channel);
+ for (i = 0 ; i < NR_ISA_ADDRS ; i++) {
+ if (cy_isa_addresses[i] == 0) break;
+ }
+ for (j = 1; j <= ints[0]; j++){
+ if ( i < NR_ISA_ADDRS ){
+ cy_isa_addresses[i++] = (unsigned char *)(ints[j]);
+ }
+ }
- cy_next_channel += cy_pci_nchan;
- }
- return(i);
-#else
- return(0);
-#endif /* ifdef CONFIG_PCI */
-}
+} /* cy_setup */
+#endif
-#ifdef CYCLOM_SHOW_STATUS
+#ifdef CY_SHOW_STATUS
static void
show_status(int line_num)
{
@@ -3183,7 +5537,8 @@
printk(" cy_port\n");
printk(" card line flags = %d %d %x\n",
info->card, info->line, info->flags);
- printk(" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
+ printk(" *tty read_status_mask timeout xmit_fifo_size ",
+ printk("= %lx %x %x %x\n",
(long)info->tty, info->read_status_mask,
info->timeout, info->xmit_fifo_size);
printk(" cor1,cor2,cor3,cor4,cor5 = %x %x %x %x %x\n",
@@ -3200,59 +5555,60 @@
save_flags(flags); cli();
- base_addr = (unsigned char*)
- (cy_card[card].base_addr + (cy_chip_offset[chip]<<index));
+ base_addr = (unsigned char*)
+ (cy_card[card].base_addr
+ + (cy_chip_offset[chip]<<index));
/* Global Registers */
- printk(" CyGFRCR %x\n", base_addr[CyGFRCR<<index]);
- printk(" CyCAR %x\n", base_addr[CyCAR<<index]);
- printk(" CyGCR %x\n", base_addr[CyGCR<<index]);
- printk(" CySVRR %x\n", base_addr[CySVRR<<index]);
- printk(" CyRICR %x\n", base_addr[CyRICR<<index]);
- printk(" CyTICR %x\n", base_addr[CyTICR<<index]);
- printk(" CyMICR %x\n", base_addr[CyMICR<<index]);
- printk(" CyRIR %x\n", base_addr[CyRIR<<index]);
- printk(" CyTIR %x\n", base_addr[CyTIR<<index]);
- printk(" CyMIR %x\n", base_addr[CyMIR<<index]);
- printk(" CyPPR %x\n", base_addr[CyPPR<<index]);
+ printk(" CyGFRCR %x\n", cy_readb(base_addr + CyGFRCR<<index));
+ printk(" CyCAR %x\n", cy_readb(base_addr + CyCAR<<index));
+ printk(" CyGCR %x\n", cy_readb(base_addr + CyGCR<<index));
+ printk(" CySVRR %x\n", cy_readb(base_addr + CySVRR<<index));
+ printk(" CyRICR %x\n", cy_readb(base_addr + CyRICR<<index));
+ printk(" CyTICR %x\n", cy_readb(base_addr + CyTICR<<index));
+ printk(" CyMICR %x\n", cy_readb(base_addr + CyMICR<<index));
+ printk(" CyRIR %x\n", cy_readb(base_addr + CyRIR<<index));
+ printk(" CyTIR %x\n", cy_readb(base_addr + CyTIR<<index));
+ printk(" CyMIR %x\n", cy_readb(base_addr + CyMIR<<index));
+ printk(" CyPPR %x\n", cy_readb(base_addr + CyPPR<<index));
- base_addr[CyCAR<<index] = (u_char)channel;
+ cy_writeb(base_addr + CyCAR<<index, (u_char)channel);
/* Virtual Registers */
- printk(" CyRIVR %x\n", base_addr[CyRIVR<<index]);
- printk(" CyTIVR %x\n", base_addr[CyTIVR<<index]);
- printk(" CyMIVR %x\n", base_addr[CyMIVR<<index]);
- printk(" CyMISR %x\n", base_addr[CyMISR<<index]);
+ printk(" CyRIVR %x\n", cy_readb(base_addr + CyRIVR<<index));
+ printk(" CyTIVR %x\n", cy_readb(base_addr + CyTIVR<<index));
+ printk(" CyMIVR %x\n", cy_readb(base_addr + CyMIVR<<index));
+ printk(" CyMISR %x\n", cy_readb(base_addr + CyMISR<<index));
/* Channel Registers */
- printk(" CyCCR %x\n", base_addr[CyCCR<<index]);
- printk(" CySRER %x\n", base_addr[CySRER<<index]);
- printk(" CyCOR1 %x\n", base_addr[CyCOR1<<index]);
- printk(" CyCOR2 %x\n", base_addr[CyCOR2<<index]);
- printk(" CyCOR3 %x\n", base_addr[CyCOR3<<index]);
- printk(" CyCOR4 %x\n", base_addr[CyCOR4<<index]);
- printk(" CyCOR5 %x\n", base_addr[CyCOR5<<index]);
- printk(" CyCCSR %x\n", base_addr[CyCCSR<<index]);
- printk(" CyRDCR %x\n", base_addr[CyRDCR<<index]);
- printk(" CySCHR1 %x\n", base_addr[CySCHR1<<index]);
- printk(" CySCHR2 %x\n", base_addr[CySCHR2<<index]);
- printk(" CySCHR3 %x\n", base_addr[CySCHR3<<index]);
- printk(" CySCHR4 %x\n", base_addr[CySCHR4<<index]);
- printk(" CySCRL %x\n", base_addr[CySCRL<<index]);
- printk(" CySCRH %x\n", base_addr[CySCRH<<index]);
- printk(" CyLNC %x\n", base_addr[CyLNC<<index]);
- printk(" CyMCOR1 %x\n", base_addr[CyMCOR1<<index]);
- printk(" CyMCOR2 %x\n", base_addr[CyMCOR2<<index]);
- printk(" CyRTPR %x\n", base_addr[CyRTPR<<index]);
- printk(" CyMSVR1 %x\n", base_addr[CyMSVR1<<index]);
- printk(" CyMSVR2 %x\n", base_addr[CyMSVR2<<index]);
- printk(" CyRBPR %x\n", base_addr[CyRBPR<<index]);
- printk(" CyRCOR %x\n", base_addr[CyRCOR<<index]);
- printk(" CyTBPR %x\n", base_addr[CyTBPR<<index]);
- printk(" CyTCOR %x\n", base_addr[CyTCOR<<index]);
+ printk(" CyCCR %x\n", cy_readb(base_addr + CyCCR<<index));
+ printk(" CySRER %x\n", cy_readb(base_addr + CySRER<<index));
+ printk(" CyCOR1 %x\n", cy_readb(base_addr + CyCOR1<<index));
+ printk(" CyCOR2 %x\n", cy_readb(base_addr + CyCOR2<<index));
+ printk(" CyCOR3 %x\n", cy_readb(base_addr + CyCOR3<<index));
+ printk(" CyCOR4 %x\n", cy_readb(base_addr + CyCOR4<<index));
+ printk(" CyCOR5 %x\n", cy_readb(base_addr + CyCOR5<<index));
+ printk(" CyCCSR %x\n", cy_readb(base_addr + CyCCSR<<index));
+ printk(" CyRDCR %x\n", cy_readb(base_addr + CyRDCR<<index));
+ printk(" CySCHR1 %x\n", cy_readb(base_addr + CySCHR1<<index));
+ printk(" CySCHR2 %x\n", cy_readb(base_addr + CySCHR2<<index));
+ printk(" CySCHR3 %x\n", cy_readb(base_addr + CySCHR3<<index));
+ printk(" CySCHR4 %x\n", cy_readb(base_addr + CySCHR4<<index));
+ printk(" CySCRL %x\n", cy_readb(base_addr + CySCRL<<index));
+ printk(" CySCRH %x\n", cy_readb(base_addr + CySCRH<<index));
+ printk(" CyLNC %x\n", cy_readb(base_addr + CyLNC<<index));
+ printk(" CyMCOR1 %x\n", cy_readb(base_addr + CyMCOR1<<index));
+ printk(" CyMCOR2 %x\n", cy_readb(base_addr + CyMCOR2<<index));
+ printk(" CyRTPR %x\n", cy_readb(base_addr + CyRTPR<<index));
+ printk(" CyMSVR1 %x\n", cy_readb(base_addr + CyMSVR1<<index));
+ printk(" CyMSVR2 %x\n", cy_readb(base_addr + CyMSVR2<<index));
+ printk(" CyRBPR %x\n", cy_readb(base_addr + CyRBPR<<index));
+ printk(" CyRCOR %x\n", cy_readb(base_addr + CyRCOR<<index));
+ printk(" CyTBPR %x\n", cy_readb(base_addr + CyTBPR<<index));
+ printk(" CyTCOR %x\n", cy_readb(base_addr + CyTCOR<<index));
restore_flags(flags);
} /* show_status */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov