patch-2.1.67 linux/drivers/net/README.dgrs

• Lines: 53
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.1.66/linux/drivers/net/README.dgrs
• Orig date: Sat Dec 21 07:23:20 1996

diff -u --recursive --new-file v2.1.66/linux/drivers/net/README.dgrs linux/drivers/net/README.dgrs
@@ -1,52 +0,0 @@
-	The Digi Intl. RightSwitch SE-X (dgrs) Device Driver
-
-This is a Linux driver for the Digi International RightSwitch SE-X
-EISA and PCI boards.  These are 4 (EISA) or 6 (PCI) port ethernet
-switches and a NIC combined into a single board.  This driver can
-be compiled into the kernel statically or as a loadable module.
-
-There is also a companion management tool, called "xrightswitch".
-The management tool lets you watch the performance graphically,
-as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
-Tree, and Aging time.  These can also be set from the command line
-when the driver is loaded.  The driver command line options are:
-
-	debug=NNN		Debug printing level
-	dma=0/1			Disable/Enable DMA on PCI card
-	spantree=0/1		Disable/Enable IEEE spanning tree
-	hashexpire=NNN		Change address aging time (default 300 seconds)
-	ipaddr=A,B,C,D		Set SNMP agent IP address i.e. 199,86,8,221
-	iptrap=A,B,C,D		Set SNMP agent IP trap address i.e. 199,86,8,221
-	ipxnet=NNN		Set SNMP agent IPX network number
-	nicmode=0/1		Disable/Enable multiple NIC mode
-
-There is also a tool for setting up input and output packet filters
-on each port, called "dgrsfilt".
-
-Both the management tool and the filtering tool are available
-separately from the following FTP site:
-
-	ftp://ftp.dgii.com/drivers/rightswitch/linux/
-
-When nicmode=1, the board and driver operate as 4 or 6 individual
-NIC ports (eth0...eth5) instead of as a switch.  All switching
-functions are disabled.  In the future, the board firmware may include
-a routing cache when in this mode.
-
-Copyright 1995-1996 Digi International Inc.
-
-This software may be used and distributed according to the terms
-of the GNU General Public License, incorporated herein by reference.
-
-For information on purchasing a RightSwitch SE-4 or SE-6
-board, please contact Digi's sales department at 1-612-912-3444
-or 1-800-DIGIBRD.  Outside the U.S., please check our Web page at:
-
-	http://www.dgii.com
-
-for sales offices worldwide.  Tech support is also available through
-the channels listed on the Web site, although as long as I am
-employed on networking products at Digi I will be happy to provide
-any bug fixes that may be needed.
-
--Rick Richardson, rick@dgii.com