patch-2.3.4 linux/Documentation/isdn/README.eicon

• Lines: 93
• Date: Sun May 23 10:03:41 1999
• Orig file: v2.3.3/linux/Documentation/isdn/README.eicon
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.3/linux/Documentation/isdn/README.eicon linux/Documentation/isdn/README.eicon
@@ -0,0 +1,92 @@
+$Id: README.eicon,v 1.3 1999/03/29 11:10:04 armin Exp $
+
+(c) 1999 Cytronics & Melware
+
+This document describes the eicon driver for the
+Eicon.Diehl active ISDN cards.
+
+It is meant to be used with isdn4linux, an ISDN link-level module for Linux.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+NOTE : Since the eicon driver is still experimental, this README file
+       may be incomplete and not up to date.
+
+
+However, the driver should work under following conditions :
+
+Supported Cards
+---------------
+
+- S-Card ISA
+- SX-Card ISA
+- SXn-Card ISA
+- SCOM-Card ISA
+- Quadro-Card ISA
+- S2M-Card ISA
+- DIVA Server BRI/PCI 2M
+- DIVA Server PRI/PCI 2M (9M 23M 30M)
+  (Only analog modem functions of the DSPs are currently implemented)
+
+ISDN D-Channel Protocols
+------------------------
+
+- ETSI (Euro-DSS1) 
+- 1TR6 (German ISDN) *not testet*
+
+
+
+You can load the module simply by using the insmod or modprobe function :
+
+  insmod eicon [id=driverid] [membase=<membase>] [irq=<irq>]
+
+
+The module will automatically probe the PCI-cards. If the id-options
+is omitted, the driver will assume 'eicon0' for the first pci card and
+increases the digit with each further card. With a given driver-id
+the module appends a number starting with '0'.
+
+For ISA-cards you have to specify membase, irq and id. If id or
+membase is missing/invalid, the driver will not be loaded except
+PCI-cards were found. Additional ISA-cards and irq/membase changes
+can be done with the eiconctrl utility.
+
+After loading the module, you have to download the protocol and
+dsp-code by using the eiconctrl utility of isdn4k-utils.
+
+
+Example for loading and starting a BRI card with E-DSS1 Protocol.
+
+	eiconctrl [-d DriverId] load etsi
+
+
+Example for loading and starting a PRI card with E-DSS1 Protocol.
+
+	eiconctrl [-d DriverId] load etsi -s2 -n
+
+
+Details about using the eiconctrl utility are in 'man eiconctrl'
+or will be printed by starting eiconctrl without any parameters.
+
+
+
+Any reports about bugs, errors and even wishes are welcome.
+
+
+Have fun !
+
+Armin Schindler
+mac@melware.de
+http://www.melware.de