patch-2.3.4 linux/drivers/net/irda/actisys.c

• Lines: 267
• Date: Sun May 30 10:27:03 1999
• Orig file: v2.3.3/linux/drivers/net/irda/actisys.c
• Orig date: Sat Apr 24 17:49:37 1999

diff -u --recursive --new-file v2.3.3/linux/drivers/net/irda/actisys.c linux/drivers/net/irda/actisys.c
@@ -1,16 +1,16 @@
 /*********************************************************************
  *                
  * Filename:      actisys.c
- * Version:       0.5
+ * Version:       0.8
  * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
  *                dongles
  * Status:        Experimental.
  * Author:        Dag Brattli <dagb@cs.uit.no>
  * Created at:    Wed Oct 21 20:02:35 1998
- * Modified at:   Mon Apr 12 11:56:35 1999
+ * Modified at:   Mon May 10 15:12:54 1999
  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  * 
- *     Copyright (c) 1998 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
  *      
  *     This program is free software; you can redistribute it and/or 
  *     modify it under the terms of the GNU General Public License as 
@@ -36,15 +36,14 @@
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
 #include <net/irda/irda_device.h>
-#include <net/irda/irtty.h>
 #include <net/irda/dongle.h>
 
-static void actisys_reset( struct irda_device *dev, int unused);
-static void actisys_open( struct irda_device *idev, int type);
-static void actisys_close( struct irda_device *dev);
+static void actisys_reset(struct irda_device *dev, int unused);
+static void actisys_open(struct irda_device *idev, int type);
+static void actisys_close(struct irda_device *dev);
 static void actisys_change_speed( struct irda_device *dev, int baudrate);
-static void actisys_reset( struct irda_device *dev, int unused);
-static void actisys_init_qos( struct irda_device *idev, struct qos_info *qos);
+static void actisys_reset(struct irda_device *dev, int unused);
+static void actisys_init_qos(struct irda_device *idev, struct qos_info *qos);
 
 /* These are the baudrates supported */
 static int baud_rates[] = { 9600, 19200, 57600, 115200, 38400};
@@ -58,17 +57,37 @@
 	actisys_init_qos,
 };
 
-__initfunc(void actisys_init(void))
+static struct dongle dongle_plus = {
+	ACTISYS_PLUS_DONGLE,
+	actisys_open,
+	actisys_close,
+	actisys_reset,
+	actisys_change_speed,
+	actisys_init_qos,
+};
+
+__initfunc(int actisys_init(void))
 {
-	irtty_register_dongle(&dongle);
+	int ret;
+
+	ret = irda_device_register_dongle(&dongle);
+	if (ret < 0)
+		return ret;
+	ret = irda_device_register_dongle(&dongle_plus);
+	if (ret < 0) {
+		irda_device_unregister_dongle(&dongle);
+		return ret;
+	}	
+	return 0;
 }
 
 void actisys_cleanup(void)
 {
-	irtty_unregister_dongle(&dongle);
+	irda_device_unregister_dongle(&dongle);
+	irda_device_unregister_dongle(&dongle_plus);
 }
 
-static void actisys_open( struct irda_device *idev, int type)
+static void actisys_open(struct irda_device *idev, int type)
 {
 	strcat(idev->description, " <-> actisys");
 
@@ -78,8 +97,11 @@
 	MOD_INC_USE_COUNT;
 }
 
-static void actisys_close( struct irda_device *dev)
+static void actisys_close(struct irda_device *idev)
 {
+	/* Power off dongle */
+	irda_device_set_dtr_rts(idev, FALSE, FALSE);
+
 	MOD_DEC_USE_COUNT;
 }
 
@@ -90,25 +112,16 @@
  *    To cycle through the available baud rates, pulse RTS low for a few
  *    ms.  
  */
-static void actisys_change_speed( struct irda_device *idev, int baudrate)
+static void actisys_change_speed(struct irda_device *idev, int baudrate)
 {
-        struct irtty_cb *self;
-        struct tty_struct *tty;
-        struct termios old_termios;
-	int cflag;
         int current_baudrate;
         int index = 0;
 	
-	DEBUG( 4, __FUNCTION__ "()\n");
+	DEBUG(4, __FUNCTION__ "()\n");
 
-	ASSERT( idev != NULL, return;);
-	ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return;);
-	
-	self = (struct irtty_cb *) idev->priv;
+	ASSERT(idev != NULL, return;);
+	ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;);
 	
-	ASSERT( self != NULL, return;);
-	ASSERT( self->magic == IRTTY_MAGIC, return;);
-
 	current_baudrate = idev->qos.baud_rate.value;
 
 	/* Find the correct baudrate index for the currently used baudrate */
@@ -117,69 +130,34 @@
 
         DEBUG( 4, __FUNCTION__ "(), index=%d\n", index);
 
-	if ( !self->tty)
-		return;
-
-	tty = self->tty;
-
 	/* Cycle through avaiable baudrates until we reach the correct one */
-        while ( current_baudrate != baudrate) {	
-                DEBUG( 4, __FUNCTION__ "(), current baudrate = %d\n",
-                       baud_rates[index]);
+        while (current_baudrate != baudrate) {	
+                DEBUG(4, __FUNCTION__ "(), current baudrate = %d\n",
+		      baud_rates[index]);
 		
 		/* Set DTR, clear RTS */
-		irtty_set_dtr_rts(tty, TRUE, FALSE);
+		irda_device_set_dtr_rts(idev, TRUE, FALSE);
 		
 		/* Wait at a few ms */
 		current->state = TASK_INTERRUPTIBLE;
 		schedule_timeout(2);
 
 		/* Set DTR, Set RTS */
-		irtty_set_dtr_rts(tty, TRUE, TRUE);
+		irda_device_set_dtr_rts(idev, TRUE, TRUE);
 		
 		/* Wait at a few ms again */
 		current->state = TASK_INTERRUPTIBLE;
-		schedule_timeout( 2);
+		schedule_timeout(2);
 
                 /* Go to next baudrate */
-		if ( idev->io.dongle_id == ACTISYS_DONGLE)
+		if (idev->io.dongle_id == ACTISYS_DONGLE)
                         index = (index+1) % 4; /* IR-220L */
 		else
                         index = (index+1) % 5; /* IR-220L+ */
 
                 current_baudrate = baud_rates[index];
         }
-	DEBUG(4, __FUNCTION__ "(), current baudrate = %d\n", 
-	      baud_rates[index]);
-
-	/* Now change the speed of the serial port */
-	old_termios = *(tty->termios);
-	cflag = tty->termios->c_cflag;
-
-	cflag &= ~CBAUD;
-
-        switch ( baudrate) {
-        case 9600:
-        default:
-		cflag |= B9600;
-		break;
-	case 19200:
-		cflag |= B19200;
-		break;
-	case 38400:
-		cflag |= B38400;
-		break;
-	case 57600:
-		cflag |= B57600;
-		break;
-	case 115200:
-		cflag |= B115200;
-		break;
-	}
-
-	/* Change speed of serial port */
-	tty->termios->c_cflag = cflag;
-	tty->driver.set_termios( tty, &old_termios);
+	DEBUG(4, __FUNCTION__ "(), current baudrate = %d\n",baud_rates[index]);
 }
 
 /*
@@ -191,32 +169,20 @@
  *    	1. Clear DTR for a few ms.
  *
  */
-static void actisys_reset( struct irda_device *idev, int unused)
+static void actisys_reset(struct irda_device *idev, int unused)
 {
-	struct irtty_cb *self;
-        struct tty_struct *tty;
-
-	ASSERT( idev != NULL, return;);
-	ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return;);
-	
-	self = (struct irtty_cb *) idev->priv;
+	ASSERT(idev != NULL, return;);
+	ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;);
 	
-	ASSERT( self != NULL, return;);
-	ASSERT( self->magic == IRTTY_MAGIC, return;);
-
-	tty = self->tty;
-	if ( !tty)
-		return;
-
 	/* Clear DTR */
-	irtty_set_dtr_rts(tty, FALSE, TRUE);
+	irda_device_set_dtr_rts(idev, FALSE, TRUE);
 
 	/* Sleep 10-20 ms*/
 	current->state = TASK_INTERRUPTIBLE;
 	schedule_timeout(2);
 	
 	/* Go back to normal mode */
-	irtty_set_dtr_rts(tty, TRUE, TRUE);
+	irda_device_set_dtr_rts(idev, TRUE, TRUE);
 	
 	idev->qos.baud_rate.value = 9600;
 }
@@ -227,12 +193,12 @@
  *    Initialize QoS capabilities
  *
  */
-static void actisys_init_qos( struct irda_device *idev, struct qos_info *qos)
+static void actisys_init_qos(struct irda_device *idev, struct qos_info *qos)
 {
 	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
 
 	/* Remove support for 38400 if this is not a 220L+ dongle */
-	if ( idev->io.dongle_id == ACTISYS_DONGLE)
+	if (idev->io.dongle_id == ACTISYS_DONGLE)
 		qos->baud_rate.bits &= ~IR_38400;
 	
 	qos->min_turn_time.bits &= 0x40; /* Needs 0.01 ms */
@@ -251,8 +217,7 @@
  */
 int init_module(void)
 {
-	actisys_init();
-	return(0);
+	return actisys_init();
 }
 
 /*