patch-2.3.4 linux/drivers/net/irda/w83977af_ir.c
Next file: linux/drivers/net/lapbether.c
Previous file: linux/drivers/net/irda/uircc.c
Back to the patch index
Back to the overall index
- Lines: 1127
- Date:
Sun May 30 10:27:04 1999
- Orig file:
v2.3.3/linux/drivers/net/irda/w83977af_ir.c
- Orig date:
Sat Apr 24 17:49:37 1999
diff -u --recursive --new-file v2.3.3/linux/drivers/net/irda/w83977af_ir.c linux/drivers/net/irda/w83977af_ir.c
@@ -1,16 +1,16 @@
/*********************************************************************
*
* Filename: w83977af_ir.c
- * Version: 0.8
- * Description: FIR/MIR driver for the Winbond W83977AF Super I/O chip
+ * Version: 1.0
+ * Description: FIR driver for the Winbond W83977AF Super I/O chip
* Status: Experimental.
* Author: Paul VanderSpek
* Created at: Wed Nov 4 11:46:16 1998
- * Modified at: Tue Apr 20 11:15:00 1999
+ * Modified at: Thu May 13 08:03:27 1999
* Modified by: Dag Brattli <dagb@cs.uit.no>
*
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>
* Copyright (c) 1998 Corel Computer Corp.
- * Copyright (c) 1998 Dag Brattli <dagb@cs.uit.no>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -40,7 +40,7 @@
********************************************************************/
#include <linux/module.h>
-
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
@@ -61,44 +61,45 @@
#include <net/irda/w83977af.h>
#include <net/irda/w83977af_ir.h>
-#define NETWINDER
+#define CONFIG_NETWINDER /* Adjust to NetWinder differences */
+#undef CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
+#define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
+#undef CONFIG_USE_INTERNAL_TIMER /* Just cannot make that timer work */
+#define CONFIG_USE_W977_PNP /* Currently needed */
+#define PIO_MAX_SPEED 115200
static char *driver_name = "w83977af_ir";
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
#define CHIP_IO_EXTENT 8
static unsigned int io[] = { 0x180, ~0, ~0, ~0 };
static unsigned int irq[] = { 6, 0, 0, 0 };
-static unsigned int dma[] = { 0, 0, 0, 0 };
-
-static struct irda_device *dev_self[] = { NULL, NULL, NULL, NULL};
+static unsigned int dma[] =
+{ 1, 0, 0, 0 };
-/* For storing entries in the status FIFO */
-struct st_fifo_entry {
- int status;
- int len;
-};
+static struct w83977af_ir *dev_self[] = { NULL, NULL, NULL, NULL};
static struct st_fifo_entry prev;
/* Some prototypes */
-static int w83977af_open( int i, unsigned int iobase, unsigned int irq,
- unsigned int dma);
-static int w83977af_close( struct irda_device *idev);
-static int w83977af_probe( int iobase, int irq, int dma);
+static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
+ unsigned int dma);
+static int w83977af_close(struct irda_device *idev);
+static int w83977af_probe(int iobase, int irq, int dma);
static int w83977af_dma_receive(struct irda_device *idev);
static int w83977af_dma_receive_complete(struct irda_device *idev);
-static int w83977af_hard_xmit( struct sk_buff *skb, struct device *dev);
-static int w83977af_pio_write( int iobase, __u8 *buf, int len, int fifo_size);
-static void w83977af_dma_write( struct irda_device *idev, int iobase);
-static void w83977af_change_speed( struct irda_device *idev, int baud);
+static int w83977af_hard_xmit(struct sk_buff *skb, struct device *dev);
+static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
+static void w83977af_dma_write(struct irda_device *idev, int iobase);
+static void w83977af_change_speed(struct irda_device *idev, int baud);
static void w83977af_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static void w83977af_wait_until_sent( struct irda_device *idev);
-static int w83977af_is_receiving( struct irda_device *idev);
+static void w83977af_wait_until_sent(struct irda_device *idev);
+static int w83977af_is_receiving(struct irda_device *idev);
-static int w83977af_net_init( struct device *dev);
-static int w83977af_net_open( struct device *dev);
-static int w83977af_net_close( struct device *dev);
+static int w83977af_net_init(struct device *dev);
+static int w83977af_net_open(struct device *dev);
+static int w83977af_net_close(struct device *dev);
/*
* Function w83977af_init ()
@@ -108,13 +109,13 @@
*/
__initfunc(int w83977af_init(void))
{
- int i;
+ int i;
- DEBUG( 0, __FUNCTION__ "()\n");
+ DEBUG(0, __FUNCTION__ "()\n");
prev.status = 0;
- for ( i=0; (io[i] < 2000) && (i < 4); i++) {
+ for (i=0; (io[i] < 2000) && (i < 4); i++) {
int ioaddr = io[i];
if (check_region(ioaddr, CHIP_IO_EXTENT) < 0)
continue;
@@ -135,11 +136,11 @@
{
int i;
- DEBUG( 4, __FUNCTION__ "()\n");
+ DEBUG(4, __FUNCTION__ "()\n");
- for ( i=0; i < 4; i++) {
- if ( dev_self[i])
- w83977af_close( dev_self[i]);
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ w83977af_close(&(dev_self[i]->idev));
}
}
#endif /* MODULE */
@@ -154,26 +155,29 @@
unsigned int dma)
{
struct irda_device *idev;
+ struct w83977af_ir *self;
int ret;
DEBUG( 0, __FUNCTION__ "()\n");
- if ( w83977af_probe( iobase, irq, dma) == -1)
+ if (w83977af_probe(iobase, irq, dma) == -1)
return -1;
/*
* Allocate new instance of the driver
*/
- idev = kmalloc( sizeof(struct irda_device), GFP_KERNEL);
- if ( idev == NULL) {
+ self = kmalloc(sizeof(struct w83977af_ir), GFP_KERNEL);
+ if (self == NULL) {
printk( KERN_ERR "IrDA: Can't allocate memory for "
"IrDA control block!\n");
return -ENOMEM;
}
- memset( idev, 0, sizeof(struct irda_device));
+ memset(self, 0, sizeof(struct w83977af_ir));
/* Need to store self somewhere */
- dev_self[i] = idev;
+ dev_self[i] = self;
+
+ idev = &self->idev;
/* Initialize IO */
idev->io.iobase = iobase;
@@ -183,17 +187,17 @@
idev->io.fifo_size = 32;
/* Lock the port that we need */
- ret = check_region( idev->io.iobase, idev->io.io_ext);
- if ( ret < 0) {
+ ret = check_region(idev->io.iobase, idev->io.io_ext);
+ if (ret < 0) {
DEBUG( 0, __FUNCTION__ "(), can't get iobase of 0x%03x\n",
idev->io.iobase);
/* w83977af_cleanup( self->idev); */
return -ENODEV;
}
- request_region( idev->io.iobase, idev->io.io_ext, idev->name);
+ request_region(idev->io.iobase, idev->io.io_ext, idev->name);
/* Initialize QoS for this device */
- irda_init_max_qos_capabilies( &idev->qos);
+ irda_init_max_qos_capabilies(&idev->qos);
/* The only value we must override it the baudrate */
@@ -202,8 +206,8 @@
IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
/* The HP HDLS-1100 needs 1 ms according to the specs */
- idev->qos.min_turn_time.bits = 0x03; /* 1ms and more */
- irda_qos_bits_to_value( &idev->qos);
+ idev->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&idev->qos);
idev->flags = IFF_FIR|IFF_MIR|IFF_SIR|IFF_DMA|IFF_PIO;
@@ -221,13 +225,13 @@
idev->is_receiving = w83977af_is_receiving;
/* Override the network functions we need to use */
- idev->netdev.init = w83977af_net_init;
+ idev->netdev.init = w83977af_net_init;
idev->netdev.hard_start_xmit = w83977af_hard_xmit;
- idev->netdev.open = w83977af_net_open;
- idev->netdev.stop = w83977af_net_close;
+ idev->netdev.open = w83977af_net_open;
+ idev->netdev.stop = w83977af_net_close;
/* Open the IrDA device */
- irda_device_open( idev, driver_name, NULL);
+ irda_device_open(idev, driver_name, self);
return 0;
}
@@ -240,15 +244,18 @@
*/
static int w83977af_close( struct irda_device *idev)
{
+ struct w83977af_ir *self;
int iobase;
- DEBUG( 0, __FUNCTION__ "()\n");
+ DEBUG(0, __FUNCTION__ "()\n");
- ASSERT( idev != NULL, return -1;);
- ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return -1;);
+ ASSERT(idev != NULL, return -1;);
+ ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return -1;);
iobase = idev->io.iobase;
+ self = (struct w83977af_ir *) idev->priv;
+#ifdef CONFIG_USE_W977_PNP
/* enter PnP configuration mode */
w977_efm_enter();
@@ -258,13 +265,15 @@
w977_write_reg(0x30, 0x00);
w977_efm_exit();
-
+#endif /* CONFIG_USE_W977_PNP */
/* Release the PORT that this driver is using */
DEBUG(0 , __FUNCTION__ "(), Releasing Region %03x\n",
idev->io.iobase);
- release_region( idev->io.iobase, idev->io.io_ext);
+ release_region(idev->io.iobase, idev->io.io_ext);
+
+ irda_device_close(idev);
- irda_device_close( idev);
+ kfree(self);
return 0;
}
@@ -280,7 +289,7 @@
int version;
DEBUG( 0, __FUNCTION__ "()\n");
-
+#ifdef CONFIG_USE_W977_PNP
/* Enter PnP configuration mode */
w977_efm_enter();
@@ -289,14 +298,14 @@
/* Configure PnP port, IRQ, and DMA channel */
w977_write_reg(0x60, (iobase >> 8) & 0xff);
w977_write_reg(0x61, (iobase) & 0xff);
- /* w977_write_reg(0x70, 0x06); */
+
w977_write_reg(0x70, irq);
-#ifdef NETWINDER
- w977_write_reg(0x74, dma+1); /* Netwinder uses one higher than Linux */
+#ifdef CONFIG_NETWINDER
+ w977_write_reg(0x74, dma+1); /* Netwinder uses 1 higher than Linux */
#else
w977_write_reg(0x74, dma);
#endif
- w977_write_reg(0x75, dma); /* Disable Tx DMA */
+ w977_write_reg(0x75, 0x04); /* Disable Tx DMA */
/* Set append hardware CRC, enable IR bank selection */
w977_write_reg(0xf0, APEDCRC|ENBNKSEL);
@@ -305,26 +314,26 @@
w977_write_reg(0x30, 0x01);
w977_efm_exit();
-
+#endif
/* Disable Advanced mode */
- switch_bank( iobase, SET2);
+ switch_bank(iobase, SET2);
outb(iobase+2, 0x00);
/* Turn on UART (global) interrupts */
- switch_bank( iobase, SET0);
- outb( HCR_EN_IRQ, iobase+HCR);
+ switch_bank(iobase, SET0);
+ outb(HCR_EN_IRQ, iobase+HCR);
/* Switch to advanced mode */
- switch_bank( iobase, SET2);
- outb( inb( iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
+ switch_bank(iobase, SET2);
+ outb(inb(iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
/* Set default IR-mode */
- switch_bank( iobase, SET0);
- outb( HCR_SIR, iobase+HCR);
+ switch_bank(iobase, SET0);
+ outb(HCR_SIR, iobase+HCR);
/* Read the Advanced IR ID */
switch_bank(iobase, SET3);
- version = inb( iobase+AUID);
+ version = inb(iobase+AUID);
/* Should be 0x1? */
if (0x10 != (version & 0xf0)) {
@@ -333,18 +342,17 @@
}
/* Set FIFO size to 32 */
- switch_bank( iobase, SET2);
- outb( ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+ switch_bank(iobase, SET2);
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
/* Set FIFO threshold to TX17, RX16 */
switch_bank(iobase, SET0);
outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|UFR_EN_FIFO,iobase+UFR);
-/* outb( 0xa7, iobase+UFR); */
/* Receiver frame length */
- switch_bank( iobase, SET4);
- outb( 2048 & 0xff, iobase+6);
- outb(( 2048 >> 8) & 0x1f, iobase+7);
+ switch_bank(iobase, SET4);
+ outb(2048 & 0xff, iobase+6);
+ outb((2048 >> 8) & 0x1f, iobase+7);
/*
* Init HP HSDL-1100 transceiver.
@@ -358,8 +366,8 @@
* FIRRX pin 39 connected to receiver (IRSL0)
* CIRRX pin 40 connected to pin 37
*/
- switch_bank( iobase, SET7);
- outb( 0x40, iobase+7);
+ switch_bank(iobase, SET7);
+ outb(0x40, iobase+7);
DEBUG(0, "W83977AF (IR) driver loaded. Version: 0x%02x\n", version);
@@ -372,16 +380,14 @@
* Change the speed of the device
*
*/
-void w83977af_change_speed( struct irda_device *idev, int speed)
+void w83977af_change_speed(struct irda_device *idev, int speed)
{
int ir_mode = HCR_SIR;
int iobase;
__u8 set;
- DEBUG( 0, __FUNCTION__ "()\n");
-
- ASSERT( idev != NULL, return;);
- ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return;);
+ ASSERT(idev != NULL, return;);
+ ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;);
iobase = idev->io.iobase;
@@ -389,22 +395,22 @@
idev->io.baudrate = speed;
/* Save current bank */
- set = inb( iobase+SSR);
+ set = inb(iobase+SSR);
/* Disable interrupts */
- switch_bank( iobase, SET0);
- outb( 0, iobase+ICR);
+ switch_bank(iobase, SET0);
+ outb(0, iobase+ICR);
/* Select Set 2 */
- switch_bank( iobase, SET2);
+ switch_bank(iobase, SET2);
+ outb(0x00, iobase+ABHL);
- outb( 0x00, iobase+ABHL);
- switch ( speed) {
- case 9600: outb( 0x0c, iobase+ABLL); break;
- case 19200: outb( 0x06, iobase+ABLL); break;
- case 37600: outb( 0x03, iobase+ABLL); break;
- case 57600: outb( 0x02, iobase+ABLL); break;
- case 115200: outb( 0x01, iobase+ABLL); break;
+ switch (speed) {
+ case 9600: outb(0x0c, iobase+ABLL); break;
+ case 19200: outb(0x06, iobase+ABLL); break;
+ case 37600: outb(0x03, iobase+ABLL); break;
+ case 57600: outb(0x02, iobase+ABLL); break;
+ case 115200: outb(0x01, iobase+ABLL); break;
case 576000:
ir_mode = HCR_MIR_576;
DEBUG(0, __FUNCTION__ "(), handling baud of 576000\n");
@@ -419,34 +425,37 @@
break;
default:
ir_mode = HCR_FIR;
- DEBUG( 0, __FUNCTION__ "(), unknown baud rate of %d\n", speed);
+ DEBUG(0, __FUNCTION__ "(), unknown baud rate of %d\n", speed);
break;
}
/* Set speed mode */
switch_bank(iobase, SET0);
- outb( ir_mode, iobase+HCR);
+ outb(ir_mode, iobase+HCR);
/* set FIFO size to 32 */
- switch_bank( iobase, SET2);
- outb( ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+ switch_bank(iobase, SET2);
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
/* set FIFO threshold to TX17, RX16 */
switch_bank(iobase, SET0);
- outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
-
+
+ outb(0x00, iobase+UFR); /* Reset */
+ outb(UFR_EN_FIFO, iobase+UFR); /* First we must enable FIFO */
+ outb(0xa7, iobase+UFR);
+
idev->netdev.tbusy = 0;
/* Enable some interrupts so we can receive frames */
switch_bank(iobase, SET0);
- if ( speed > 115200) {
- outb( ICR_EFSFI, iobase+ICR);
- w83977af_dma_receive( idev);
+ if (speed > PIO_MAX_SPEED) {
+ outb(ICR_EFSFI, iobase+ICR);
+ w83977af_dma_receive(idev);
} else
- outb( ICR_ERBRI, iobase+ICR);
+ outb(ICR_ERBRI, iobase+ICR);
/* Restore SSR */
- outb( set, iobase+SSR);
+ outb(set, iobase+SSR);
}
/*
@@ -455,7 +464,7 @@
* Sets up a DMA transfer to send the current frame.
*
*/
-int w83977af_hard_xmit( struct sk_buff *skb, struct device *dev)
+int w83977af_hard_xmit(struct sk_buff *skb, struct device *dev)
{
struct irda_device *idev;
int iobase;
@@ -474,20 +483,21 @@
/* Lock transmit buffer */
if (irda_lock((void *) &dev->tbusy) == FALSE)
return -EBUSY;
-
+
/* Save current set */
set = inb(iobase+SSR);
/* Decide if we should use PIO or DMA transfer */
- if (idev->io.baudrate > 115200) {
+ if (idev->io.baudrate > PIO_MAX_SPEED) {
+ idev->tx_buff.data = idev->tx_buff.head;
memcpy(idev->tx_buff.data, skb->data, skb->len);
idev->tx_buff.len = skb->len;
- idev->tx_buff.data = idev->tx_buff.head;
mtt = irda_get_mtt(skb);
+#ifdef CONFIG_USE_INTERNAL_TIMER
if (mtt > 50) {
/* Adjust for timer resolution */
- mtt = mtt / 1000 + 1;
+ mtt /= 1000+1;
/* Setup timer */
switch_bank(iobase, SET4);
@@ -502,6 +512,8 @@
switch_bank(iobase, SET0);
outb(ICR_ETMRI, iobase+ICR);
} else {
+#endif
+ DEBUG(4,__FUNCTION__ "(%ld), mtt=%d\n", jiffies, mtt);
if (mtt)
udelay(mtt);
@@ -509,7 +521,9 @@
switch_bank(iobase, SET0);
outb(ICR_EDMAI, iobase+ICR);
w83977af_dma_write(idev, iobase);
+#ifdef CONFIG_USE_INTERNAL_TIMER
}
+#endif
} else {
idev->tx_buff.data = idev->tx_buff.head;
idev->tx_buff.len = async_wrap_skb(skb, idev->tx_buff.data,
@@ -527,41 +541,57 @@
return 0;
}
-
/*
* Function w83977af_dma_write (idev, iobase)
*
- *
+ * Send frame using DMA
*
*/
-static void w83977af_dma_write( struct irda_device *idev, int iobase)
+static void w83977af_dma_write(struct irda_device *idev, int iobase)
{
__u8 set;
-
- DEBUG( 4, __FUNCTION__ "()\n");
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ unsigned long flags;
+ __u8 hcr;
+#endif
+ DEBUG(4, __FUNCTION__ "(), len=%d\n", idev->tx_buff.len);
/* Save current set */
- set = inb( iobase+SSR);
+ set = inb(iobase+SSR);
/* Disable DMA */
switch_bank(iobase, SET0);
- outb( inb( iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
-
- setup_dma(idev->io.dma, idev->tx_buff.data, idev->tx_buff.len,
- DMA_MODE_WRITE);
-
- /* idev->media_busy = TRUE; */
- idev->io.direction = IO_XMIT;
-
+ outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
+
/* Choose transmit DMA channel */
switch_bank(iobase, SET2);
- outb(inb(iobase+ADCR1) | ADCR1_D_CHSW|ADCR1_DMA_F|ADCR1_ADV_SL,
- iobase+ADCR1);
+ outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ save_flags(flags);
+ cli();
+
+ disable_dma(idev->io.dma);
+ clear_dma_ff(idev->io.dma);
+ set_dma_mode(idev->io.dma, DMA_MODE_READ);
+ set_dma_addr(idev->io.dma, virt_to_bus(idev->tx_buff.data));
+ set_dma_count(idev->io.dma, idev->tx_buff.len);
+#else
+ setup_dma(idev->io.dma, idev->tx_buff.data, idev->tx_buff.len,
+ DMA_MODE_WRITE);
+#endif
+ idev->io.direction = IO_XMIT;
/* Enable DMA */
switch_bank(iobase, SET0);
- outb(inb(iobase+HCR) | HCR_EN_DMA, iobase+HCR);
-
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ hcr = inb(iobase+HCR);
+ outb(hcr | HCR_EN_DMA, iobase+HCR);
+ enable_dma(idev->io.dma);
+ restore_flags(flags);
+#else
+ outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
+#endif
+
/* Restore set register */
outb(set, iobase+SSR);
}
@@ -577,17 +607,17 @@
int actual = 0;
__u8 set;
- DEBUG( 4, __FUNCTION__ "()\n");
+ DEBUG(4, __FUNCTION__ "()\n");
/* Save current bank */
- set = inb( iobase+SSR);
+ set = inb(iobase+SSR);
- switch_bank( iobase, SET0);
+ switch_bank(iobase, SET0);
if (!(inb_p(iobase+USR) & USR_TSRE)) {
- DEBUG( 4, __FUNCTION__ "(), warning, FIFO not empty yet!\n");
+ DEBUG(4, __FUNCTION__ "(), warning, FIFO not empty yet!\n");
fifo_size -= 17;
- DEBUG( 4, __FUNCTION__ "%d bytes left in tx fifo\n", fifo_size);
+ DEBUG(4, __FUNCTION__ "%d bytes left in tx fifo\n", fifo_size);
}
/* Fill FIFO with current frame */
@@ -597,7 +627,7 @@
}
DEBUG(4, __FUNCTION__ "(), fifo_size %d ; %d sent of %d\n",
- fifo_size, actual, len);
+ fifo_size, actual, len);
/* Restore bank */
outb(set, iobase+SSR);
@@ -617,7 +647,7 @@
int iobase;
__u8 set;
- DEBUG(4, __FUNCTION__ "()\n");
+ DEBUG(4, __FUNCTION__ "(%ld)\n", jiffies);
ASSERT(idev != NULL, return;);
ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;);
@@ -663,9 +693,10 @@
*/
int w83977af_dma_receive(struct irda_device *idev)
{
+ struct w83977af_ir *self;
int iobase;
__u8 set;
-#ifdef NETWINDER
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
unsigned long flags;
__u8 hcr;
#endif
@@ -673,62 +704,60 @@
ASSERT(idev != NULL, return -1;);
ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return -1;);
- DEBUG(0, __FUNCTION__ "\n");
+ DEBUG(4, __FUNCTION__ "\n");
+ self = idev->priv;
iobase= idev->io.iobase;
/* Save current set */
- set = inb( iobase+SSR);
+ set = inb(iobase+SSR);
/* Disable DMA */
- switch_bank( iobase, SET0);
- outb( inb( iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
+ switch_bank(iobase, SET0);
+ outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
-#ifdef NETWINDER
+ /* Choose DMA Rx, DMA Fairness, and Advanced mode */
+ switch_bank(iobase, SET2);
+ outb((inb(iobase+ADCR1) & ~ADCR1_D_CHSW)/*|ADCR1_DMA_F*/|ADCR1_ADV_SL,
+ iobase+ADCR1);
+
+ idev->io.direction = IO_RECV;
+ idev->rx_buff.data = idev->rx_buff.head;
+
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
save_flags(flags);
cli();
- disable_dma( idev->io.dma);
- clear_dma_ff( idev->io.dma);
- set_dma_mode( idev->io.dma, DMA_MODE_READ);
- set_dma_addr( idev->io.dma, virt_to_bus(idev->rx_buff.data));
- set_dma_count( idev->io.dma, idev->rx_buff.truesize);
+ disable_dma(idev->io.dma);
+ clear_dma_ff(idev->io.dma);
+ set_dma_mode(idev->io.dma, DMA_MODE_READ);
+ set_dma_addr(idev->io.dma, virt_to_bus(idev->rx_buff.data));
+ set_dma_count(idev->io.dma, idev->rx_buff.truesize);
#else
- setup_dma(idev->io.dma, idev->rx_buff.data,
- idev->rx_buff.truesize, DMA_MODE_READ);
+ setup_dma(idev->io.dma, idev->rx_buff.data, idev->rx_buff.truesize,
+ DMA_MODE_READ);
#endif
- /* driver->media_busy = FALSE; */
- idev->io.direction = IO_RECV;
- idev->rx_buff.data = idev->rx_buff.head;
-
/*
* Reset Rx FIFO. This will also flush the ST_FIFO, it's very
* important that we don't reset the Tx FIFO since it might not
* be finished transmitting yet
*/
- outb( UFR_RXTL|UFR_TXTL|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
- prev.status = 0;
-
- /* Choose DMA Rx, DMA Fairness, and Advanced mode */
- switch_bank(iobase, SET2);
- outb(( inb( iobase+ADCR1) & ~ADCR1_D_CHSW)|ADCR1_DMA_F|ADCR1_ADV_SL,
- iobase+ADCR1);
+ switch_bank(iobase, SET0);
+ outb(UFR_RXTL|UFR_TXTL|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
+ self->st_fifo.len = self->st_fifo.tail = self->st_fifo.head = 0;
/* Enable DMA */
switch_bank(iobase, SET0);
-#ifdef NETWINDER
- hcr = inb( iobase+HCR);
- enable_dma( idev->io.dma);
- outb( hcr | HCR_EN_DMA, iobase+HCR);
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+ hcr = inb(iobase+HCR);
+ outb(hcr | HCR_EN_DMA, iobase+HCR);
+ enable_dma(idev->io.dma);
restore_flags(flags);
#else
- outb( inb( iobase+HCR) | HCR_EN_DMA, iobase+HCR);
+ outb(inb(iobase+HCR) | HCR_EN_DMA, iobase+HCR);
#endif
-
/* Restore set */
- outb( set, iobase+SSR);
-
- DEBUG( 4, __FUNCTION__ "(), done!\n");
+ outb(set, iobase+SSR);
return 0;
}
@@ -742,12 +771,17 @@
int w83977af_dma_receive_complete(struct irda_device *idev)
{
struct sk_buff *skb;
+ struct w83977af_ir *self;
+ struct st_fifo *st_fifo;
int len;
int iobase;
__u8 set;
__u8 status;
- DEBUG(0, __FUNCTION__ "\n");
+ DEBUG(4, __FUNCTION__ "\n");
+
+ self = idev->priv;
+ st_fifo = &self->st_fifo;
iobase = idev->io.iobase;
@@ -756,22 +790,28 @@
iobase = idev->io.iobase;
+ /* Read status FIFO */
switch_bank(iobase, SET5);
- if (prev.status & FS_FO_FSFDR) {
- status = prev.status;
- len = prev.len;
+ while ((status = inb(iobase+FS_FO)) & FS_FO_FSFDR) {
+ st_fifo->entries[st_fifo->tail].status = status;
- prev.status = 0;
- } else {
- status = inb(iobase+FS_FO);
- len = inb(iobase+RFLFL);
- len |= inb(iobase+RFLFH) << 8;
+ st_fifo->entries[st_fifo->tail].len = inb(iobase+RFLFL);
+ st_fifo->entries[st_fifo->tail].len |= inb(iobase+RFLFH) << 8;
+
+ st_fifo->tail++;
+ st_fifo->len++;
}
+
+ while (st_fifo->len) {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->head++;
+ st_fifo->len--;
- while (status & FS_FO_FSFDR) {
/* Check for errors */
if (status & FS_FO_ERR_MSK) {
- if ( status & FS_FO_LST_FR) {
+ if (status & FS_FO_LST_FR) {
/* Add number of lost frames to stats */
idev->stats.rx_errors += len;
} else {
@@ -800,14 +840,20 @@
/* Check if we have transfered all data to memory */
switch_bank(iobase, SET0);
if (inb(iobase+USR) & USR_RDR) {
+#ifdef CONFIG_USE_INTERNAL_TIMER
/* Put this entry back in fifo */
- prev.status = status;
- prev.len = len;
-
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->entries[st_fifo->head].status = status;
+ st_fifo->entries[st_fifo->head].len = len;
+
/* Restore set register */
- outb( set, iobase+SSR);
+ outb(set, iobase+SSR);
return FALSE; /* I'll be back! */
+#else
+ udelay(80); /* Should be enough!? */
+#endif
}
skb = dev_alloc_skb(len+1);
@@ -824,28 +870,23 @@
skb_reserve(skb, 1);
/* Copy frame without CRC */
- if ( idev->io.baudrate < 4000000) {
- skb_put( skb, len-2);
- memcpy( skb->data, idev->rx_buff.data, len-2);
+ if (idev->io.baudrate < 4000000) {
+ skb_put(skb, len-2);
+ memcpy(skb->data, idev->rx_buff.data, len-2);
} else {
- skb_put( skb, len-4);
- memcpy( skb->data, idev->rx_buff.data, len-4);
+ skb_put(skb, len-4);
+ memcpy(skb->data, idev->rx_buff.data, len-4);
}
/* Move to next frame */
idev->rx_buff.data += len;
+ idev->stats.rx_packets++;
skb->dev = &idev->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
- netif_rx( skb);
- idev->stats.rx_packets++;
+ netif_rx(skb);
}
- /* Read next entry in ST_FIFO */
- switch_bank(iobase, SET5);
- status = inb( iobase+FS_FO);
- len = inb( iobase+RFLFL);
- len |= inb( iobase+RFLFH) << 8;
}
/* Restore set register */
outb(set, iobase+SSR);
@@ -875,7 +916,6 @@
do {
byte = inb(iobase+RBR);
async_unwrap_char(idev, byte);
-
} while (inb(iobase+USR) & USR_RDR); /* Data available */
}
@@ -889,9 +929,12 @@
{
int actual;
__u8 new_icr = 0;
+ __u8 set;
+ int iobase;
DEBUG(4, __FUNCTION__ "(), isr=%#x\n", isr);
+ iobase = idev->io.iobase;
/* Transmit FIFO low on data */
if (isr & ISR_TXTH_I) {
/* Write data left in transmit buffer */
@@ -899,16 +942,21 @@
idev->tx_buff.data,
idev->tx_buff.len,
idev->io.fifo_size);
+
idev->tx_buff.data += actual;
idev->tx_buff.len -= actual;
idev->io.direction = IO_XMIT;
/* Check if finished */
- if (idev->tx_buff.len > 0)
+ if (idev->tx_buff.len > 0) {
new_icr |= ICR_ETXTHI;
- else {
- DEBUG( 4, __FUNCTION__ "(), finished with frame!\n");
+ } else {
+ set = inb(iobase+SSR);
+ switch_bank(iobase, SET0);
+ outb(AUDR_SFEND, iobase+AUDR);
+ outb(set, iobase+SSR);
+
idev->netdev.tbusy = 0; /* Unlock */
idev->stats.tx_packets++;
@@ -917,7 +965,6 @@
new_icr |= ICR_ETBREI;
}
-
}
/* Check if transmission has completed */
if (isr & ISR_TXEMP_I) {
@@ -943,22 +990,20 @@
* Handle MIR/FIR interrupt
*
*/
-static __u8 w83977af_fir_interrupt( struct irda_device *idev, int isr)
+static __u8 w83977af_fir_interrupt(struct irda_device *idev, int isr)
{
__u8 new_icr = 0;
__u8 set;
int iobase;
- DEBUG( 4, __FUNCTION__ "(), isr=%#x\n", isr);
-
iobase = idev->io.iobase;
-
set = inb(iobase+SSR);
/* End of frame detected in FIFO */
if (isr & (ISR_FEND_I|ISR_FSF_I)) {
if (w83977af_dma_receive_complete(idev)) {
+ /* Wait for next status FIFO interrupt */
new_icr |= ICR_EFSFI;
} else {
/* DMA not finished yet */
@@ -982,7 +1027,7 @@
/* Clear timer event */
/* switch_bank(iobase, SET0); */
-/* outb( ASCR_CTE, iobase+ASCR); */
+/* outb(ASCR_CTE, iobase+ASCR); */
/* Check if this is a TX timer interrupt */
if (idev->io.direction == IO_XMIT) {
@@ -998,15 +1043,18 @@
}
/* Finished with DMA */
if (isr & ISR_DMA_I) {
- w83977af_dma_xmit_complete( idev);
-
+ w83977af_dma_xmit_complete(idev);
+
/* Check if there are more frames to be transmitted */
- if (irda_device_txqueue_empty( idev)) {
+ /* if (irda_device_txqueue_empty(idev)) { */
- /* Prepare for receive */
- w83977af_dma_receive(idev);
- new_icr = ICR_EFSFI;
- }
+ /* Prepare for receive
+ *
+ * ** Netwinder Tx DMA likes that we do this anyway **
+ */
+ w83977af_dma_receive(idev);
+ new_icr = ICR_EFSFI;
+ /* } */
}
/* Restore set */
@@ -1030,7 +1078,7 @@
if (idev == NULL) {
printk(KERN_WARNING "%s: irq %d for unknown device.\n",
- driver_name, irq);
+ driver_name, irq);
return;
}
@@ -1049,7 +1097,7 @@
if (isr) {
/* Dispatch interrupt handler for the current speed */
- if ( idev->io.baudrate > 115200)
+ if (idev->io.baudrate > PIO_MAX_SPEED )
icr = w83977af_fir_interrupt(idev, isr);
else
icr = w83977af_sir_interrupt(idev, isr);
@@ -1070,7 +1118,7 @@
static void w83977af_wait_until_sent(struct irda_device *idev)
{
current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(6);
+ schedule_timeout(60*HZ/1000);
}
/*
@@ -1085,16 +1133,16 @@
int iobase;
__u8 set;
- ASSERT( idev != NULL, return FALSE;);
- ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return FALSE;);
+ ASSERT(idev != NULL, return FALSE;);
+ ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return FALSE;);
- if ( idev->io.baudrate > 115200) {
+ if (idev->io.baudrate > 115200) {
iobase = idev->io.iobase;
/* Check if rx FIFO is not empty */
set = inb(iobase+SSR);
- switch_bank( iobase, SET2);
- if (( inb( iobase+RXFDTH) & 0x3f) != 0) {
+ switch_bank(iobase, SET2);
+ if ((inb(iobase+RXFDTH) & 0x3f) != 0) {
/* We are receiving something */
status = TRUE;
}
@@ -1111,12 +1159,12 @@
*
*
*/
-static int w83977af_net_init( struct device *dev)
+static int w83977af_net_init(struct device *dev)
{
DEBUG(0, __FUNCTION__ "()\n");
/* Set up to be a normal IrDA network device driver */
- irda_device_setup( dev);
+ irda_device_setup(dev);
/* Insert overrides below this line! */
@@ -1130,7 +1178,7 @@
* Start the device
*
*/
-static int w83977af_net_open( struct device *dev)
+static int w83977af_net_open(struct device *dev)
{
struct irda_device *idev;
int iobase;
@@ -1147,7 +1195,7 @@
iobase = idev->io.iobase;
if (request_irq(idev->io.irq, w83977af_interrupt, 0, idev->name,
- (void *) idev)) {
+ (void *) idev)) {
return -EAGAIN;
}
/*
@@ -1170,13 +1218,13 @@
/* Enable some interrupts so we can receive frames again */
switch_bank(iobase, SET0);
if (idev->io.baudrate > 115200) {
- outb( ICR_EFSFI, iobase+ICR);
- w83977af_dma_receive( idev);
+ outb(ICR_EFSFI, iobase+ICR);
+ w83977af_dma_receive(idev);
} else
- outb( ICR_ERBRI, iobase+ICR);
+ outb(ICR_ERBRI, iobase+ICR);
/* Restore bank register */
- outb( set, iobase+SSR);
+ outb(set, iobase+SSR);
MOD_INC_USE_COUNT;
@@ -1195,34 +1243,34 @@
int iobase;
__u8 set;
- DEBUG( 0, __FUNCTION__ "()\n");
+ DEBUG(0, __FUNCTION__ "()\n");
/* Stop device */
dev->tbusy = 1;
dev->start = 0;
- ASSERT( dev != NULL, return -1;);
+ ASSERT(dev != NULL, return -1;);
idev = (struct irda_device *) dev->priv;
- ASSERT( idev != NULL, return 0;);
- ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return 0;);
+ ASSERT(idev != NULL, return 0;);
+ ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return 0;);
iobase = idev->io.iobase;
- disable_dma( idev->io.dma);
+ disable_dma(idev->io.dma);
/* Save current set */
- set = inb( iobase+SSR);
+ set = inb(iobase+SSR);
/* Disable interrupts */
- switch_bank( iobase, SET0);
- outb( 0, iobase+ICR);
+ switch_bank(iobase, SET0);
+ outb(0, iobase+ICR);
- free_irq( idev->io.irq, idev);
- free_dma( idev->io.dma);
+ free_irq(idev->io.irq, idev);
+ free_dma(idev->io.dma);
/* Restore bank register */
- outb( set, iobase+SSR);
+ outb(set, iobase+SSR);
MOD_DEC_USE_COUNT;
@@ -1230,6 +1278,11 @@
}
#ifdef MODULE
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Winbond W83977AF IrDA Device Driver");
+
+MODULE_PARM(qos_mtt_bits, "i");
/*
* Function init_module (void)
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)