patch-2.4.10 linux/Documentation/arm/SA1100/Itsy
Next file: linux/Documentation/arm/SA1100/PCMCIA
Previous file: linux/Documentation/arm/SA1100/HUW_WEBPANEL
Back to the patch index
Back to the overall index
- Lines: 42
- Date:
Fri Sep 7 09:28:38 2001
- Orig file:
v2.4.9/linux/Documentation/arm/SA1100/Itsy
- Orig date:
Wed Oct 20 16:29:07 1999
diff -u --recursive --new-file v2.4.9/linux/Documentation/arm/SA1100/Itsy linux/Documentation/arm/SA1100/Itsy
@@ -2,11 +2,38 @@
Research Center in Palo Alto, CA. The Itsy project is one of several
research projects at Compaq that are related to pocket computing.
-Itsy support has yet to be fully integrated in this kernel. Linux 2.0.x
-support is available though.
-
For more information, see:
http://www.research.digital.com/wrl/itsy/index.html
+Notes on initial 2.4 Itsy support (8/27/2000) :
+The port was done on an Itsy version 1.5 machine with a daughtercard with
+64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for
+serial console (to see what you're doing). No other devices have been
+enabled.
+
+To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support.
+Disable Flash and LCD support. and then do a make dep and a make zImage.
+Finally, you will need to cd to arch/arm/boot/tools and execute a make there
+to build the params-itsy program used to boot the kernel.
+
+In order to install the port of 2.4 to the itsy, You will need to set the
+configuration parameters in the monitor as follows:
+Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0
+Make sure the start-routine address is set to 0x00060000.
+
+Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the
+flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000
+("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000
+("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on
+handhelds.org.
+
+The serial connection we established was at:
+ 8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the
+params-itsy program, and in the kernel itself. This can be changed, but
+not easily. The monitor parameters are easily changed, the params program
+setup is assembly outl's, and the kernel is a configuration item specific to
+the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.)
+
+This should get you a properly booting 2.4 kernel on the itsy.
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)