patch-2.4.10 linux/drivers/char/ite_gpio.c

Next file: linux/drivers/char/joystick/Config.in
Previous file: linux/drivers/char/isicom.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.9/linux/drivers/char/ite_gpio.c linux/drivers/char/ite_gpio.c
@@ -0,0 +1,430 @@
+/*
+ * FILE NAME ite_gpio.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ *  API for ITE GPIO device.
+ *  Driver for ITE GPIO device.
+ *
+ *  Author: MontaVista Software, Inc.  <source@mvista.com>
+ *          Hai-Pao Fan <haipao@mvista.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE	LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <asm/addrspace.h>
+#include <asm/it8172/it8172_int.h>
+#include <linux/sched.h>
+#include <linux/ite_gpio.h>
+
+#define ite_gpio_base 0x14013800
+
+#define	ITE_GPADR	(*(volatile __u8 *)(0x14013800 + KSEG1))
+#define	ITE_GPBDR	(*(volatile __u8 *)(0x14013808 + KSEG1))
+#define	ITE_GPCDR	(*(volatile __u8 *)(0x14013810 + KSEG1))
+#define	ITE_GPACR	(*(volatile __u16 *)(0x14013802 + KSEG1))
+#define	ITE_GPBCR	(*(volatile __u16 *)(0x1401380a + KSEG1))
+#define	ITE_GPCCR	(*(volatile __u16 *)(0x14013812 + KSEG1))
+#define ITE_GPAICR	(*(volatile __u16 *)(0x14013804 + KSEG1))
+#define	ITE_GPBICR	(*(volatile __u16 *)(0x1401380c + KSEG1))
+#define	ITE_GPCICR	(*(volatile __u16 *)(0x14013814 + KSEG1))
+#define	ITE_GPAISR	(*(volatile __u8 *)(0x14013806 + KSEG1))
+#define	ITE_GPBISR	(*(volatile __u8 *)(0x1401380e + KSEG1))
+#define	ITE_GPCISR	(*(volatile __u8 *)(0x14013816 + KSEG1))
+#define	ITE_GCR		(*(volatile __u8 *)(0x14013818 + KSEG1))
+
+#define MAX_GPIO_LINE		21
+static int ite_gpio_irq=IT8172_GPIO_IRQ;
+
+static long ite_irq_counter[MAX_GPIO_LINE];
+wait_queue_head_t ite_gpio_wait[MAX_GPIO_LINE];
+static int ite_gpio_irq_pending[MAX_GPIO_LINE];
+
+static int ite_gpio_debug=0;
+#define DEB(x)  if (ite_gpio_debug>=1) x
+
+int ite_gpio_in(__u32 device, __u32 mask, volatile __u32 *data)
+{
+	DEB(printk("ite_gpio_in mask=0x%x\n",mask)); 
+
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		ITE_GPACR = (__u16)mask;	/* 0xffff */
+		*data = ITE_GPADR;
+		break;
+	case ITE_GPIO_PORTB:
+		ITE_GPBCR = (__u16)mask;	/* 0xffff */
+		*data = ITE_GPBDR;
+		break;
+	case ITE_GPIO_PORTC:
+		ITE_GPCCR = (__u16)mask;	/* 0x03ff */
+		*data = ITE_GPCDR;
+		break;
+	default:
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+
+int ite_gpio_out(__u32 device, __u32 mask, __u32 data)
+{
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		ITE_GPACR = (__u16)mask;	/* 0x5555 */
+		ITE_GPADR = (__u8)data;
+		break;
+	case ITE_GPIO_PORTB:
+		ITE_GPBCR = (__u16)mask;	/* 0x5555 */
+		ITE_GPBDR = (__u8)data;
+		break;
+	case ITE_GPIO_PORTC:
+		ITE_GPCCR = (__u16)mask;	/* 0x0155 */
+		ITE_GPCDR = (__u8)data;
+		break;
+	default:
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+int ite_gpio_int_ctrl(__u32 device, __u32 mask, __u32 data)
+{
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		ITE_GPAICR = (ITE_GPAICR & ~mask) | (data & mask);
+		break;
+	case ITE_GPIO_PORTB:
+		ITE_GPBICR = (ITE_GPBICR & ~mask) | (data & mask);
+		break;
+	case ITE_GPIO_PORTC:
+		ITE_GPCICR = (ITE_GPCICR & ~mask) | (data & mask);
+		break;
+	default:
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+int ite_gpio_in_status(__u32 device, __u32 mask, volatile __u32 *data)
+{
+	int ret=-1;
+
+	if (MAX_GPIO_LINE > *data >= 0) 
+		ret=ite_gpio_irq_pending[*data];
+ 
+	DEB(printk("ite_gpio_in_status %d ret=%d\n",*data, ret));
+
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		*data = ITE_GPAISR & mask;
+		break;
+	case ITE_GPIO_PORTB:
+		*data = ITE_GPBISR & mask;
+		break;
+	case ITE_GPIO_PORTC:
+		*data = ITE_GPCISR & mask;
+		break;
+	default:
+		return -EFAULT;
+	}
+
+	return ret;
+}
+
+int ite_gpio_out_status(__u32 device, __u32 mask, __u32 data)
+{
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		ITE_GPAISR = (ITE_GPAISR & ~mask) | (data & mask);
+		break;
+	case ITE_GPIO_PORTB:
+		ITE_GPBISR = (ITE_GPBISR & ~mask) | (data & mask);
+		break;
+	case ITE_GPIO_PORTC:
+		ITE_GPCISR = (ITE_GPCISR & ~mask) | (data & mask);
+		break;
+	default:
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+int ite_gpio_gen_ctrl(__u32 device, __u32 mask, __u32 data)
+{
+	ITE_GCR = (ITE_GCR & ~mask) | (data & mask);
+
+	return 0;
+}
+
+int ite_gpio_int_wait (__u32 device, __u32 mask, __u32 data)
+{
+	int i,line=0, ret=0;
+	unsigned long flags;
+
+	switch (device) {
+	case ITE_GPIO_PORTA:
+		line = data & mask;
+		break;
+	case ITE_GPIO_PORTB:
+		line = (data & mask) <<8;
+		break;
+	case ITE_GPIO_PORTC:
+		line = (data & mask) <<16;
+		break;
+	}
+	for (i=MAX_GPIO_LINE-1; i >= 0; i--) {
+		if ( (line) & (1 << i))
+			break;
+	}
+
+	DEB(printk("wait device=0x%d mask=0x%x data=0x%x index %d\n", 
+		device, mask, data, i));
+
+	if (line & ~(1<<i))
+		return -EFAULT;
+
+	if (ite_gpio_irq_pending[i]==1)
+		return -EFAULT;
+
+	save_flags (flags);
+	cli();
+	ite_gpio_irq_pending[i] = 1;
+	ret = interruptible_sleep_on_timeout(&ite_gpio_wait[i], 3*HZ);
+	restore_flags (flags);
+	ite_gpio_irq_pending[i] = 0;
+
+	return ret;
+}
+
+EXPORT_SYMBOL(ite_gpio_in);
+EXPORT_SYMBOL(ite_gpio_out);
+EXPORT_SYMBOL(ite_gpio_int_ctrl);
+EXPORT_SYMBOL(ite_gpio_in_status);
+EXPORT_SYMBOL(ite_gpio_out_status);
+EXPORT_SYMBOL(ite_gpio_gen_ctrl);
+EXPORT_SYMBOL(ite_gpio_int_wait);
+
+static int ite_gpio_open(struct inode *inode, struct file *file)
+{
+	unsigned int minor = MINOR(inode->i_rdev); 
+	if (minor != GPIO_MINOR)
+		return -ENODEV;
+
+#ifdef MODULE
+	MOD_INC_USE_COUNT;
+#endif
+
+	return 0;
+}
+
+
+static int ite_gpio_release(struct inode *inode, struct file *file)
+{
+
+#ifdef MODULE
+	MOD_DEC_USE_COUNT;
+#endif
+
+	return 0;
+}
+
+
+static int ite_gpio_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+
+	static struct ite_gpio_ioctl_data ioctl_data;
+
+	if (copy_from_user(&ioctl_data, (struct ite_gpio_ioctl_data *)arg,
+			sizeof(ioctl_data)))
+		return -EFAULT;
+	if ((ioctl_data.device < ITE_GPIO_PORTA) ||
+			(ioctl_data.device > ITE_GPIO_PORTC) )
+				return -EFAULT;
+
+	switch(cmd) {
+		case ITE_GPIO_IN:
+			if (ite_gpio_in(ioctl_data.device, ioctl_data.mask,
+					   &ioctl_data.data))
+				return -EFAULT;
+
+			if (copy_to_user((struct ite_gpio_ioctl_data *)arg,
+					 &ioctl_data, sizeof(ioctl_data)))
+				return -EFAULT;
+			break;
+
+		case ITE_GPIO_OUT:
+			return ite_gpio_out(ioctl_data.device,
+					ioctl_data.mask, ioctl_data.data);
+			break;
+
+		case ITE_GPIO_INT_CTRL:
+			return ite_gpio_int_ctrl(ioctl_data.device,
+					ioctl_data.mask, ioctl_data.data);
+			break;
+
+		case ITE_GPIO_IN_STATUS:
+			if (ite_gpio_in_status(ioctl_data.device, ioctl_data.mask,
+					&ioctl_data.data))
+				return -EFAULT;
+			if (copy_to_user((struct ite_gpio_ioctl_data *)arg,
+					&ioctl_data, sizeof(ioctl_data))) 
+				return -EFAULT;
+			break;
+
+		case ITE_GPIO_OUT_STATUS:
+			return ite_gpio_out_status(ioctl_data.device,
+					ioctl_data.mask, ioctl_data.data);
+			break;
+
+		case ITE_GPIO_GEN_CTRL:
+			return ite_gpio_gen_ctrl(ioctl_data.device,
+					ioctl_data.mask, ioctl_data.data);
+			break;
+
+		case ITE_GPIO_INT_WAIT:
+			return ite_gpio_int_wait(ioctl_data.device,
+					ioctl_data.mask, ioctl_data.data);
+			break;
+
+		default:
+			return -ENOIOCTLCMD;
+
+	}
+	return 0;
+}
+
+static void ite_gpio_irq_handler(int this_irq, void *dev_id, struct pt_regs *regs)
+{
+	int i,line;
+
+	line = ITE_GPCISR & 0x1f;
+	for (i=4; i >=0; i--) {
+		if ( line & (1 << i)) { 
+			++ite_irq_counter[i+16];
+			ite_gpio_irq_pending[i+16] = 2;
+			wake_up_interruptible(&ite_gpio_wait[i+16]);
+
+DEB(printk("interrupt 0x%x %d\n", &ite_gpio_wait[i+16], i+16));
+
+			ITE_GPCISR = ITE_GPCISR & (1<<i);
+			return;
+		}
+	}
+	line = ITE_GPBISR;
+	for (i=7; i >= 0; i--) {
+		if ( line & (1 << i)) {
+			++ite_irq_counter[i+8];
+			ite_gpio_irq_pending[i+8] = 2;
+			wake_up_interruptible(&ite_gpio_wait[i+8]);
+
+DEB(printk("interrupt 0x%x %d\n",ITE_GPBISR, i+8));
+
+			ITE_GPBISR = ITE_GPBISR & (1<<i);
+			return;
+		}
+	}
+	line = ITE_GPAISR;
+	for (i=7; i >= 0; i--) {
+		if ( line & (1 << i)) {
+			++ite_irq_counter[i];
+			ite_gpio_irq_pending[i] = 2;
+			wake_up_interruptible(&ite_gpio_wait[i]);
+
+DEB(printk("interrupt 0x%x %d\n",ITE_GPAISR, i));
+
+			ITE_GPAISR = ITE_GPAISR & (1<<i);
+			return;
+		}
+	}
+}
+
+static struct file_operations ite_gpio_fops =
+{
+	owner:		THIS_MODULE,
+	ioctl:		ite_gpio_ioctl,
+	open:		ite_gpio_open,
+	release:	ite_gpio_release,
+};
+
+/* GPIO_MINOR in include/linux/miscdevice.h */
+static struct miscdevice ite_gpio_miscdev =
+{
+	GPIO_MINOR,
+	"ite_gpio",
+	&ite_gpio_fops
+};
+
+int __init ite_gpio_init(void)
+{
+	int i;
+
+	misc_register(&ite_gpio_miscdev);
+
+	if (check_region(ite_gpio_base, 0x1c) < 0 ) {
+           return -ENODEV;
+        } else {
+           request_region(ite_gpio_base, 0x1c, "ITE GPIO");
+        }     
+
+	/* initialize registers */
+        ITE_GPACR = 0xffff;
+        ITE_GPBCR = 0xffff;
+        ITE_GPCCR = 0xffff;
+        ITE_GPAICR = 0x00ff;
+        ITE_GPBICR = 0x00ff;
+        ITE_GPCICR = 0x00ff;
+        ITE_GCR = 0;
+
+	for (i = 0; i < MAX_GPIO_LINE; i++) {
+		ite_gpio_irq_pending[i]=0;	
+		init_waitqueue_head(&ite_gpio_wait[i]);
+	}
+	if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, SA_SHIRQ, "gpio", 0) < 0)
+		return 0;
+	printk("GPIO at 0x%x (irq = %d)\n", ite_gpio_base, ite_gpio_irq);
+
+	return 0;
+}	
+
+void __exit ite_gpio_exit(void)
+{
+	misc_deregister(&ite_gpio_miscdev);
+}
+
+module_init(ite_gpio_init);
+module_exit(ite_gpio_exit);
+
+MODULE_LICENSE("GPL");

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)