patch-2.4.10 linux/drivers/i2c/i2c-ite.h

Next file: linux/drivers/i2o/i2o_block.c
Previous file: linux/drivers/i2c/i2c-algo-ite.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.9/linux/drivers/i2c/i2c-ite.h linux/drivers/i2c/i2c-ite.h
@@ -0,0 +1,117 @@
+/*
+   --------------------------------------------------------------------
+   i2c-ite.h: Global defines for the I2C controller on board the    
+                 ITE MIPS processor.                                
+   --------------------------------------------------------------------
+   Hai-Pao Fan, MontaVista Software, Inc.
+   hpfan@mvista.com or source@mvista.com
+
+   Copyright 2001 MontaVista Software Inc.
+
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef I2C_ITE_H
+#define I2C_ITE_H 1
+
+#include <asm/it8172/it8172.h>
+
+/* I2C Registers */
+#define ITE_I2CHCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
+#define ITE_I2CHSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
+#define ITE_I2CSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
+#define ITE_I2CSSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
+#define ITE_I2CCKCNT	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
+#define ITE_I2CSHDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
+#define ITE_I2CRSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
+#define ITE_I2CPSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
+
+#define ITE_I2CFDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
+#define ITE_I2CFBCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
+#define ITE_I2CFCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
+#define ITE_I2CFSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
+
+
+/* Host Control Register ITE_I2CHCR */
+#define	ITE_I2CHCR_HCE	0x01	/* Enable I2C Host Controller */
+#define	ITE_I2CHCR_IE	0x02	/* Enable the interrupt after completing
+				   the current transaction */
+#define ITE_I2CHCR_CP_W	0x00	/* bit2-4 000 - Write */
+#define	ITE_I2CHCR_CP_R	0x08	/*	  010 - Current address read */
+#define	ITE_I2CHCR_CP_S	0x10	/*	  100 - Sequential read */
+#define ITE_I2CHCR_ST	0x20	/* Initiates the I2C host controller to execute
+				   the command and send the data programmed in
+				   all required registers to I2C bus */
+#define ITE_CMD		ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
+#define ITE_WRITE	ITE_CMD | ITE_I2CHCR_CP_W
+#define ITE_READ	ITE_CMD | ITE_I2CHCR_CP_R
+#define ITE_SREAD	ITE_CMD | ITE_I2CHCR_CP_S
+
+/* Host Status Register ITE_I2CHSR */
+#define	ITE_I2CHSR_DB	0x01	/* Device is busy, receives NACK response except
+				   in the first and last bytes */
+#define	ITE_I2CHSR_DNE	0x02	/* Target address on I2C bus does not exist */
+#define	ITE_I2CHSR_TDI	0x04	/* R/W Transaction on I2C bus was completed */
+#define	ITE_I2CHSR_HB	0x08	/* Host controller is processing transactions */
+#define	ITE_I2CHSR_FER	0x10	/* Error occurs in the FIFO */
+
+/* Slave Address Register ITE_I2CSAR */
+#define	ITE_I2CSAR_SA_MASK	0xfe	/* Target I2C device address */
+#define	ITE_I2CSAR_ASO		0x0100	/* Output 1/0 to I2CAS port when the
+					   next slave address is addressed */
+
+/* Slave Sub-address Register ITE_I2CSSAR */
+#define	ITE_I2CSSAR_SUBA_MASK	0xff	/* Target I2C device sub-address */
+
+/* Clock Counter Register ITE_I2CCKCNT */
+#define	ITE_I2CCKCNT_STOP	0x00	/* stop I2C clock */
+#define	ITE_I2CCKCNT_HPCC_MASK	0x7f	/* SCL high period counter */
+#define	ITE_I2CCKCNT_LPCC_MASK	0x7f00	/* SCL low period counter */
+
+/* START Hold Time Register ITE_I2CSHDR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CSHDR_FM	0x0a	/* START condition at fast mode */
+#define	ITE_I2CSHDR_SM	0x47	/* START contition at standard mode */
+
+/* (Repeated) START Setup Time Register ITE_I2CRSUR */
+/* value is counted based on 16 MHz internal clock */
+#define	ITE_I2CRSUR_FM	0x0a	/* repeated START condition at fast mode */
+#define	ITE_I2CRSUR_SM	0x50	/* repeated START condition at standard mode */
+
+/* STOP setup Time Register ITE_I2CPSUR */
+
+/* FIFO Data Register ITE_I2CFDR */
+#define	ITE_I2CFDR_MASK		0xff
+
+/* FIFO Byte Count Register ITE_I2CFBCR */
+#define ITE_I2CFBCR_MASK	0x3f
+
+/* FIFO Control Register ITE_I2CFCR */
+#define	ITE_I2CFCR_FLUSH	0x01	/* Flush FIFO and reset the FIFO point
+					   and I2CFSR */
+/* FIFO Status Register ITE_I2CFSR */
+#define	ITE_I2CFSR_FO	0x01	/* FIFO is overrun when write */
+#define	ITE_I2CFSR_FU	0x02	/* FIFO is underrun when read */
+#define	ITE_I2CFSR_FF	0x04	/* FIFO is full when write */
+#define	ITE_I2CFSR_FE	0x08	/* FIFO is empty when read */
+
+#endif  /* I2C_ITE_H */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)