patch-2.4.13 linux/include/asm-arm/arch-sa1100/graphicsmaster.h
Next file: linux/include/asm-arm/arch-sa1100/h3600.h
Previous file: linux/include/asm-arm/arch-sa1100/dma.h
Back to the patch index
Back to the overall index
- Lines: 67
- Date:
Thu Oct 11 09:04:57 2001
- Orig file:
v2.4.12/linux/include/asm-arm/arch-sa1100/graphicsmaster.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.12/linux/include/asm-arm/arch-sa1100/graphicsmaster.h linux/include/asm-arm/arch-sa1100/graphicsmaster.h
@@ -0,0 +1,66 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/graphicsmaster.h
+ *
+ * Created 2000/12/18 by Woojung Huh <whuh@applieddata.net>
+ *
+ * This file comes from graphicsclient.h of Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for the
+ * ADS GraphicsMaster
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define ADS_CPLD_BASE (0x10000000)
+#define ADS_p2v( x ) ((x) - ADS_CPLD_BASE + 0xf0000000)
+#define ADS_v2p( x ) ((x) - 0xf0000000 + ADS_CPLD_BASE)
+
+
+#define _ADS_SW_SWITCHES 0x10060000 /* Software Switches */
+
+/* Extra IRQ Controller */
+#define _ADS_INT_ST1 0x10080000 /* IRQ Status #1 */
+#define _ADS_INT_ST2 0x10080004 /* IRQ Status #2 */
+#define _ADS_INT_EN1 0x10080008 /* IRQ Enable #1 */
+#define _ADS_INT_EN2 0x1008000c /* IRQ Enable #2 */
+#define _ADS_DCR 0x10080018 /* Discrete Control Reg */
+
+/* Discrete Controller (AVR:Atmel AT90LS8535) */
+#define _ADS_AVR_REG 0x10080018
+
+/* On-Board Ethernet */
+#define _ADS_ETHERNET 0x100e0000 /* Ethernet */
+
+/* On-Board Quad UART 16C554 */
+#define ADS_QUAD_UART1 0x10100000
+#define ADS_QUAD_UART2 0x10120000
+#define ADS_QUAD_UART3 0x10140000
+#define ADS_QUAD_UART4 0x10160000
+
+/* LEDs */
+#define ADS_LED0 GPIO_GPIO20 /* on-board Green */
+#define ADS_LED1 GPIO_GPIO25 /* on-board Yellow */
+#define ADS_LED2 GPIO_GPIO26 /* on-board Red */
+
+/* DCR */
+#define DCR_AVR_RESET 0x01
+#define DCR_SA1111_RESET 0x02
+#define DCR_BACKLITE_ON 0x04
+
+/* Virtual register addresses */
+
+#ifndef __ASSEMBLY__
+#define ADS_INT_ST1 (*((volatile u_char *) ADS_p2v(_ADS_INT_ST1)))
+#define ADS_INT_ST2 (*((volatile u_char *) ADS_p2v(_ADS_INT_ST2)))
+#define ADS_INT_EN1 (*((volatile u_char *) ADS_p2v(_ADS_INT_EN1)))
+#define ADS_INT_EN2 (*((volatile u_char *) ADS_p2v(_ADS_INT_EN2)))
+#define ADS_ETHERNET ((int) ADS_p2v(_ADS_ETHERNET))
+#define ADS_AVR_REG (*((volatile u_char *) ADS_p2v(_ADS_AVR_REG)))
+#define ADS_DCR (*((volatile u_char *) ADS_p2v(_ADS_DCR)))
+#endif
+
+#define SA1111_BASE (0x18000000)
+
+#include "SA-1111.h"
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)