patch-2.4.20 linux-2.4.20/arch/mips64/config.in

Next file: linux-2.4.20/arch/mips64/defconfig
Previous file: linux-2.4.20/arch/mips64/arc/tree.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/mips64/config.in linux-2.4.20/arch/mips64/config.in
@@ -3,336 +3,7 @@
 # see Documentation/kbuild/config-language.txt.
 #
 define_bool CONFIG_MIPS y
+define_bool CONFIG_MIPS32 n
 define_bool CONFIG_MIPS64 y
 
-mainmenu_name "Linux/MIPS64 Kernel Configuration"
-
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'Machine selection'
-dep_bool 'Support for MIPS Atlas board (EXPERIMENTAL)' CONFIG_MIPS_ATLAS $CONFIG_EXPERIMENTAL
-dep_bool 'Support for MIPS Malta board (EXPERIMENTAL)' CONFIG_MIPS_MALTA $CONFIG_EXPERIMENTAL
-dep_bool 'Support for SGI-IP22 (Indy/Indigo2) (EXPERIMENTAL)' CONFIG_SGI_IP22 $CONFIG_EXPERIMENTAL
-bool 'Support for SGI-IP27 (Origin200/2000)' CONFIG_SGI_IP27
-if [ "$CONFIG_SGI_IP27" = "y" ]; then
-   bool '  IP27 N-Mode' CONFIG_SGI_SN0_N_MODE
-   bool '  Discontiguous Memory Support' CONFIG_DISCONTIGMEM
-   bool '  NUMA support' CONFIG_NUMA
-   bool '  Mapped kernel support' CONFIG_MAPPED_KERNEL
-   bool '  Kernel text replication support' CONFIG_REPLICATE_KTEXT
-   bool '  Exception handler replication support' CONFIG_REPLICATE_EXHANDLERS
-   bool '  Multi-Processing support' CONFIG_SMP
-   #bool '  IP27 XXL' CONFIG_SGI_SN0_XXL
-fi
-dep_bool 'Support for SGI-IP32 (O2) (EXPERIMENTAL)' CONFIG_SGI_IP32 $CONFIG_EXPERIMENTAL
-bool 'Support for SiByte SB1250 SOC' CONFIG_SIBYTE_SB1250
-if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
-   bool '  Support for SB1250 onchip PCI controller' CONFIG_PCI
-   bool '  Support for SB1250 profiling - SB1/SCD perf counters' CONFIG_SIBYTE_SB1250_PROF
-   bool '  Support for BCM1250 profiling using trace buffer' CONFIG_BCM1250_TBPROF
-   bool '  Remote debugging (kgdb over UART 1)' CONFIG_REMOTE_DEBUG
-   bool '  Support for SiByte SWARM board' CONFIG_SIBYTE_SWARM
-   if [ "$CONFIG_SIBYTE_SWARM" = "y" ]; then
-      bool '    Running under simulation' CONFIG_SIMULATION
-      bool '    Configure for L3proc Demo' CONFIG_L3DEMO
-      int '    Maximum memory chunks' CONFIG_SIBYTE_SWARM_MAX_MEM_REGIONS 16
-      bool '    Multi-Processing support' CONFIG_SMP
-   fi
-fi
-
-define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
-define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
-
-#
-# Select some configuration options automatically based on user selections.
-#
-
-if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then
-   define_bool CONFIG_BOOT_ELF32 y
-   define_int CONFIG_L1_CACHE_SHIFT 5
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_SWAP_IO_SPACE y
-fi
-if [ "$CONFIG_MIPS_MALTA" = "y" ]; then
-   define_bool CONFIG_BOOT_ELF32 y
-   define_bool CONFIG_I8259 y
-   define_int CONFIG_L1_CACHE_SHIFT 5
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_SWAP_IO_SPACE y
-fi
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_ARC_CONSOLE y
-   define_bool CONFIG_ARC_MEMORY y
-   define_bool CONFIG_BOARD_SCACHE y
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_BOOT_ELF32 y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_SGI y
-   define_int CONFIG_L1_CACHE_SHIFT 5
-fi
-if [ "$CONFIG_SGI_IP27" = "y" ]; then
-   define_bool CONFIG_BOOT_ELF64 y
-   define_bool CONFIG_ARC64 y
-   define_bool CONFIG_MAPPED_PCI_IO y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_QL_ISP_A64 y
-   define_int CONFIG_L1_CACHE_SHIFT 7
-fi
-if [ "$CONFIG_SGI_IP32" = "y" ]; then
-   define_bool CONFIG_BOOT_ELF32 y
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_PCI y
-   #define_bool CONFIG_BOARD_SCACHE y
-   define_bool CONFIG_MAPPED_PCI_IO n
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_ARC_MEMORY y
-   define_int CONFIG_L1_CACHE_SHIFT 5
-fi
-if [ "$CONFIG_SIBYTE_SWARM" = "y" ]; then
-   define_bool CONFIG_BOOT_ELF32 y
-   define_bool CONFIG_SWAP_IO_SPACE y
-   define_bool CONFIG_CFE y
-   define_bool CONFIG_SIBYTE_SB1250 y
-   define_int CONFIG_L1_CACHE_SHIFT 5
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'CPU selection'
-
-choice 'CPU type' \
-	"R4300	CONFIG_CPU_R4300 \
-	 R4x00	CONFIG_CPU_R4X00 \
-	 R5000	CONFIG_CPU_R5000 \
-	 R52x0	CONFIG_CPU_NEVADA \
-	 R8000	CONFIG_CPU_R8000 \
-	 R10000	CONFIG_CPU_R10000 \
-	 SB1	CONFIG_CPU_SB1" R4x00
-endmenu
-
-if [ "$CONFIG_CPU_SB1" = "y" ]; then
-   bool '  Workarounds for pass 1 sb1 bugs' CONFIG_SB1_PASS_1_WORKAROUNDS
-   bool '  Support for SB1 Cache Error handler' CONFIG_SB1_CACHE_ERROR
-   define_bool CONFIG_VTAG_ICACHE y
-fi
-
-define_bool CONFIG_CPU_HAS_LLSC y
-define_bool CONFIG_CPU_HAS_LLDSCD y
-
-mainmenu_option next_comment
-comment 'General setup'
-
-if [ "$CONFIG_CPU_R10000" = "y" ]; then
-   bool 'Support for large 64-bit configurations' CONFIG_MIPS_INSANE_LARGE
-fi
-bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
-
-if [ "$CONFIG_ARC32" = "y" ]; then
-   bool 'ARC console support' CONFIG_ARC_CONSOLE
-fi
-
-bool 'Networking support' CONFIG_NET
-
-if [ "$CONFIG_PCI" != "y" ]; then
-   define_bool CONFIG_PCI n
-fi
-
-source drivers/pci/Config.in
-
-if [ "$CONFIG_ISA" != "y" ]; then
-   define_bool CONFIG_ISA n
-   define_bool CONFIG_EISA n
-else
-   define_bool CONFIG_EISA y
-fi
-
-define_bool CONFIG_MCA n
-define_bool CONFIG_SBUS n
-
-bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
-
-if [ "$CONFIG_HOTPLUG" = "y" ] ; then
-   source drivers/pcmcia/Config.in
-   source drivers/hotplug/Config.in
-else
-   define_bool CONFIG_PCMCIA n
-   define_bool CONFIG_HOTPLUG_PCI n
-fi
-
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
-define_bool CONFIG_KCORE_ELF y
-define_bool CONFIG_KCORE_AOUT n
-tristate 'Kernel support for 64-bit ELF binaries' CONFIG_BINFMT_ELF
-bool 'Kernel support for Linux/MIPS 32-bit binary compatibility' CONFIG_MIPS32_COMPAT
-define_bool CONFIG_BINFMT_ELF32 $CONFIG_MIPS32_COMPAT
-tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-endmenu
-
-source drivers/mtd/Config.in
-
-source drivers/parport/Config.in
-
-source drivers/pnp/Config.in
-
-source drivers/block/Config.in
-
-source drivers/md/Config.in
-
-if [ "$CONFIG_NET" = "y" ]; then
-   source net/Config.in
-fi
-
-source drivers/telephony/Config.in
-
-if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
-
-   mainmenu_option next_comment
-   comment 'ATA/IDE/MFM/RLL support'
-
-   tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
-
-   if [ "$CONFIG_IDE" != "n" ]; then
-      source drivers/ide/Config.in
-   else
-      define_bool CONFIG_BLK_DEV_IDE_MODES n
-      define_bool CONFIG_BLK_DEV_HD n
-   fi
-   endmenu
-fi
-
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
-if [ "$CONFIG_SCSI" != "n" ]; then
-   source drivers/scsi/Config.in
-fi
-endmenu
-
-if [ "$CONFIG_PCI" = "y" ]; then
-   source drivers/message/i2o/Config.in
-fi
-
-if [ "$CONFIG_NET" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Network device support'
-
-   bool 'Network device support' CONFIG_NETDEVICES
-   if [ "$CONFIG_NETDEVICES" = "y" ]; then
-      source drivers/net/Config.in
-      if [ "$CONFIG_ATM" = "y" ]; then
-	 source drivers/atm/Config.in
-      fi
-   fi
-   endmenu
-fi
-
-source net/ax25/Config.in
-
-source net/irda/Config.in
-
-if [ "$CONFIG_NET" != "n" ]; then
-   mainmenu_option next_comment
-   comment 'ISDN subsystem'
-
-   tristate 'ISDN support' CONFIG_ISDN
-   if [ "$CONFIG_ISDN" != "n" ]; then
-      source drivers/isdn/Config.in
-   fi
-   endmenu
-fi
-
-if [ "$CONFIG_ISA" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Old CD-ROM drivers (not SCSI, not IDE)'
-
-   bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
-   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
-      source drivers/cdrom/Config.in
-   fi
-   endmenu
-fi
-
-source drivers/char/Config.in
-
-#source drivers/misc/Config.in
-
-source drivers/media/Config.in
-
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'SGI Character devices'
-   if [ "$CONFIG_VT" = "y" ]; then
-      tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
-      if [ "$CONFIG_SGI_NEWPORT_CONSOLE" = "y" ]; then
-         define_bool CONFIG_FONT_8x16 y
-      fi
-      define_bool CONFIG_DUMMY_CONSOLE y
-   fi
-   endmenu
-fi
-
-source fs/Config.in
-
-if [ "$CONFIG_VT" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Console drivers'
-   bool 'VGA text console' CONFIG_VGA_CONSOLE
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-      tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE
-      source drivers/video/Config.in
-   fi
-   endmenu
-fi
-
-mainmenu_option next_comment
-comment 'Sound'
-
-tristate 'Sound card support' CONFIG_SOUND
-if [ "$CONFIG_SOUND" != "n" ]; then
-   source drivers/sound/Config.in
-fi
-endmenu
-
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   source drivers/sgi/Config.in
-fi
-
-source drivers/usb/Config.in
-
-source net/bluetooth/Config.in
-
-source drivers/input/Config.in
-
-mainmenu_option next_comment
-comment 'Kernel hacking'
-
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
-bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
-bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
-bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
-if [ "$CONFIG_SMP" != "y" ]; then
-   bool 'Run uncached' CONFIG_MIPS_UNCACHED
-fi
-endmenu
+source arch/mips/config-shared.in

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)