patch-2.4.20 linux-2.4.20/arch/mips/config.in

Next file: linux-2.4.20/arch/mips/ddb5074/Makefile
Previous file: linux-2.4.20/arch/mips/config-shared.in
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/mips/config.in linux-2.4.20/arch/mips/config.in
@@ -4,631 +4,6 @@
 #
 define_bool CONFIG_MIPS y
 define_bool CONFIG_MIPS32 y
+define_bool CONFIG_MIPS64 n
 
-mainmenu_name "Linux/MIPS Kernel Configuration"
-
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'Machine selection'
-dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
-bool 'Support for Alchemy Semi PB1000 board' CONFIG_MIPS_PB1000
-if [ "$CONFIG_MIPS_PB1000" = "y" ]; then
-   bool '  Support for PCI AUTO Config' CONFIG_PCI_AUTO
-fi
-bool 'Support for Alchemy Semi PB1500 board' CONFIG_MIPS_PB1500
-dep_bool 'Support for Algorithmics P4032 (EXPERIMENTAL)' CONFIG_ALGOR_P4032 $CONFIG_EXPERIMENTAL
-dep_bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS $CONFIG_EXPERIMENTAL
-dep_bool 'Support for Cobalt Server (EXPERIMENTAL)' CONFIG_MIPS_COBALT $CONFIG_EXPERIMENTAL
-bool 'Support for DECstations' CONFIG_DECSTATION
-dep_bool 'Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV64120 $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
-   bool '  Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
-   choice '  Galileo Chip Clock' \
-	"75	CONFIG_SYSCLK_75 \
-	 83.3	CONFIG_SYSCLK_83 \
-	 100	CONFIG_SYSCLK_100" 83.3
-fi
-dep_bool 'Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV96100 $CONFIG_EXPERIMENTAL
-bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR
-bool 'Support for Hewlett Packard LaserJet board' CONFIG_HP_LASERJET
-bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172
-if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
-   bool '  Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC
-fi
-dep_bool 'Support for MIPS Atlas board (EXPERIMENTAL)' CONFIG_MIPS_ATLAS $CONFIG_EXPERIMENTAL
-bool 'Support for MIPS Magnum 4000' CONFIG_MIPS_MAGNUM_4000
-dep_bool 'Support for MIPS Malta board (EXPERIMENTAL)' CONFIG_MIPS_MALTA $CONFIG_EXPERIMENTAL
-bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
-dep_bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074 $CONFIG_EXPERIMENTAL
-bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476
-bool 'Support for NEC DDB Vrc-5477' CONFIG_DDB5477
-bool 'Support for NEC Osprey board' CONFIG_NEC_OSPREY
-bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
-dep_bool 'Support for Philips Nino (EXPERIMENTAL)' CONFIG_NINO $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_NINO" = "y" ]; then
-   choice 'Nino Model Number' \
-	"Model-300/301/302/319			CONFIG_NINO_4MB \
-	 Model-200/210/312/320/325/350/390	CONFIG_NINO_8MB \
-	 Model-500/510				CONFIG_NINO_16MB" Model-200
-fi
-bool 'Support for SGI IP22 (Indy/Indigo2)' CONFIG_SGI_IP22
-dep_bool 'Support for SiByte SB1250 SOC (EXPERIMENTAL)' CONFIG_SIBYTE_SB1250 $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
-   bool '  Support for SB1250 onchip PCI controller' CONFIG_PCI
-   bool '  Support for SB1250 profiling - SB1/SCD perf counters' CONFIG_SIBYTE_SB1250_PROF
-   bool '  Support for BCM1250 profiling using trace buffer' CONFIG_BCM1250_TBPROF
-   bool '  Remote debugging (kgdb over UART 1)' CONFIG_REMOTE_DEBUG
-   bool '  Support for SiByte SWARM board' CONFIG_SIBYTE_SWARM
-   if [ "$CONFIG_SIBYTE_SWARM" = "y" ]; then
-      bool '    Running under simulation' CONFIG_SIMULATION
-      bool '    Configure for L3proc Demo' CONFIG_L3DEMO
-      int '    Maximum memory chunks' CONFIG_SIBYTE_SWARM_MAX_MEM_REGIONS 16
-      bool '    Multi-Processing support' CONFIG_SMP
-   fi
-fi
-bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
-bool 'Support for Toshiba JMR-TX3927 board' CONFIG_TOSHIBA_JMR3927
-
-dep_bool 'High Memory Support (EXPERIMENTAL)' CONFIG_HIGHMEM $CONFIG_EXPERIMENTAL
-
-define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
-define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
-
-#
-# Select some configuration options automatically based on user selections.
-#
-
-if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_ISA y
-   define_bool CONFIG_MIPS_JAZZ y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_ROTTEN_IRQ y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_MIPS_PB1000" = "y" ]; then
-   define_bool CONFIG_MIPS_AU1000 y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PC_KEYB y
-   define_int  MAX_HWIFS 1
-fi
-if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
-   define_bool CONFIG_MIPS_AU1000 y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PC_KEYB y
-fi
-if [ "$CONFIG_ALGOR_P4032" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_MIPS_COBALT" = "y" ]; then
-   define_bool CONFIG_COBALT_LCD y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-fi
-if [ "$CONFIG_DECSTATION" = "y" ]; then
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NONCOHERENT_IO y
-fi
-if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_ISA n
-   define_bool CONFIG_MIPS_GT64120 y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_MIPS_GT96100 y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_SWAP_IO_SPACE y
-fi
-if [ "$CONFIG_MIPS_IVR" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_IT8172_CIR y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-fi
-if [ "$CONFIG_HP_LASERJET" = "y" ]; then
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI y
-   #not yet define_bool CONFIG_PCI_AUTO y
-fi
-if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_IT8712 y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_IT8172_CIR y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-fi
-if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_SWAP_IO_SPACE y
-fi
-if [ "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
-     "$CONFIG_OLIVETTI_M700" = "y" ]; then
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_ISA y
-   define_bool CONFIG_FB y
-   define_bool CONFIG_FB_G364 y
-   define_bool CONFIG_MIPS_JAZZ y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_MIPS_MALTA" = "y" ]; then
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_SWAP_IO_SPACE y
-   define_bool CONFIG_PC_KEYB y
-fi
-if [ "$CONFIG_MOMENCO_OCELOT" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_SYSCLK_100 y
-   define_bool CONFIG_SWAP_IO_SPACE y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_DDB5074" = "y" ]; then
-   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_ISA y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_ROTTEN_IRQ y
-   define_bool CONFIG_OLD_TIME_C y
-fi
-if [ "$CONFIG_DDB5476"  = "y" ]; then
-   define_bool CONFIG_ISA y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-fi
-if [ "$CONFIG_DDB5477" = "y" ]; then
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_DUMMY_KEYB y
-fi
-if [ "$CONFIG_NEC_OSPREY" = "y" ]; then
-   define_bool CONFIG_VR4181 y
-   define_bool CONFIG_SERIAL y
-   define_bool CONFIG_SERIAL_MANY_PORTS y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_DUMMY_KEYB y
-   define_bool CONFIG_SCSI n
-fi
-if [ "$CONFIG_NINO" = "y" ]; then
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_PC_KEYB y
-fi
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_BOARD_SCACHE y
-   define_bool CONFIG_IRQ_CPU y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_SGI y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-fi
-if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_DUMMY_KEYB y
-   define_bool CONFIG_SWAP_IO_SPACE y
-fi
-if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
-   define_bool CONFIG_ARC32 y
-   define_bool CONFIG_I8259 y
-   define_bool CONFIG_ISA y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_OLD_TIME_C y
-   define_bool CONFIG_PC_KEYB y
-   define_bool CONFIG_PCI y
-fi
-if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
-   define_bool CONFIG_TOSHIBA_BOARDS y
-   define_bool CONFIG_PCI y
-   define_bool CONFIG_NEW_PCI y
-   define_bool CONFIG_PCI_AUTO y
-   define_bool CONFIG_NEW_IRQ y
-   define_bool CONFIG_NEW_TIME_C y
-   define_bool CONFIG_NONCOHERENT_IO y
-   define_bool CONFIG_SWAP_IO_SPACE y
-   define_bool CONFIG_PC_KEYB y
-fi
-
-if [ "$CONFIG_MIPS_AU1000" != "y" ]; then
-   define_bool CONFIG_MIPS_AU1000 n
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'CPU selection'
-
-choice 'CPU type' \
-	"R3000	CONFIG_CPU_R3000 \
-	 R39XX	CONFIG_CPU_TX39XX \
-	 R6000	CONFIG_CPU_R6000 \
-	 R41xx	CONFIG_CPU_VR41XX \
-	 R4300	CONFIG_CPU_R4300 \
-	 R4x00	CONFIG_CPU_R4X00 \
-	 R49XX	CONFIG_CPU_TX49XX \
-	 R5000	CONFIG_CPU_R5000 \
-	 R5432	CONFIG_CPU_R5432 \
-	 RM7000	CONFIG_CPU_RM7000 \
-	 R52xx	CONFIG_CPU_NEVADA \
-	 R10000	CONFIG_CPU_R10000 \
-	 SB1	CONFIG_CPU_SB1 \
-	 MIPS32	CONFIG_CPU_MIPS32 \
-	 MIPS64	CONFIG_CPU_MIPS64" R4x00
-
-if [ "$CONFIG_CPU_MIPS32" = "y" ]; then
-   define_bool CONFIG_CPU_HAS_PREFETCH y
-   bool '  Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE
-fi
-
-if [ "$CONFIG_CPU_MIPS64" = "y" ]; then
-   define_bool CONFIG_CPU_HAS_PREFETCH y
-   bool '  Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE
-fi
-
-if [ "$CONFIG_CPU_RM7000" = "y" ]; then
-   define_bool CONFIG_CPU_HAS_PREFETCH y
-fi
-
-if [ "$CONFIG_CPU_SB1" = "y" ]; then
-   bool '  Workarounds for pass 1 sb1 bugs' CONFIG_SB1_PASS_1_WORKAROUNDS
-   bool '  Support for SB1 Cache Error handler' CONFIG_SB1_CACHE_ERROR
-   define_bool CONFIG_VTAG_ICACHE y
-   define_bool CONFIG_CPU_HAS_PREFETCH y
-fi
-
-if [ "$CONFIG_CPU_R4X00"  = "y" -o \
-     "$CONFIG_CPU_R5000" = "y" -o \
-     "$CONFIG_CPU_RM7000" = "y" -o \
-     "$CONFIG_CPU_R10000" = "y" -o \
-     "$CONFIG_CPU_SB1" = "y" -o \
-     "$CONFIG_CPU_MIPS32" = "y" -o \
-     "$CONFIG_CPU_MIPS64" = "y" ]; then
-   bool '  Support for 64-bit physical address space' CONFIG_64BIT_PHYS_ADDR
-fi
-
-bool 'Override CPU Options' CONFIG_CPU_ADVANCED
-if [ "$CONFIG_CPU_ADVANCED" = "y" ]; then
-   bool '  ll/sc Instructions available' CONFIG_CPU_HAS_LLSC
-   bool '  lld/scd Instructions available' CONFIG_CPU_HAS_LLDSCD
-   bool '  Writeback Buffer available' CONFIG_CPU_HAS_WB
-else
-   if [ "$CONFIG_CPU_R3000" = "y" -o \
-        "$CONFIG_CPU_VR41XX" = "y" -o    \
-        "$CONFIG_CPU_TX39XX" = "y" ]; then
-      if [ "$CONFIG_DECSTATION" = "y" ]; then
-	 define_bool CONFIG_CPU_HAS_LLSC n
-	 define_bool CONFIG_CPU_HAS_LLDSCD n
-	 define_bool CONFIG_CPU_HAS_WB y
-      else
-	 define_bool CONFIG_CPU_HAS_LLSC n
-	 define_bool CONFIG_CPU_HAS_LLDSCD n
-	 define_bool CONFIG_CPU_HAS_WB n
-      fi
-   else
-      if [ "$CONFIG_CPU_MIPS32" = "y" ]; then
-	 define_bool CONFIG_CPU_HAS_LLSC y
-	 define_bool CONFIG_CPU_HAS_LLDSCD n
-	 define_bool CONFIG_CPU_HAS_WB n
-      else
-	 define_bool CONFIG_CPU_HAS_LLSC y
-	 define_bool CONFIG_CPU_HAS_LLDSCD y
-	 define_bool CONFIG_CPU_HAS_WB n
-      fi
-   fi
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'General setup'
-if [ "$CONFIG_DECSTATION" = "y" -o \
-     "$CONFIG_DDB5074" = "y" -o    \
-     "$CONFIG_NINO" = "y" -o       \
-     "$CONFIG_MIPS_COBALT" = "y" ]; then
-   define_bool CONFIG_CPU_LITTLE_ENDIAN y
-else
-   bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
-fi
-
-if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
-       bool 'DS1742 BRAM/RTC support' CONFIG_RTC_DS1742
-fi
-
-if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
-   bool 'Include IRIX binary compatibility' CONFIG_BINFMT_IRIX
-   bool 'Include forward keyboard' CONFIG_FORWARD_KEYBOARD
-fi
-
-if [ "$CONFIG_ARC32" = "y" ]; then
-   bool 'ARC console support' CONFIG_ARC_CONSOLE
-fi
-
-bool 'Networking support' CONFIG_NET
-
-if [ "$CONFIG_PCI" != "y" ]; then
-   define_bool CONFIG_PCI n
-fi
-
-source drivers/pci/Config.in
-
-if [ "$CONFIG_ISA" != "y" ]; then
-   define_bool CONFIG_ISA n
-   define_bool CONFIG_EISA n
-else
-   define_bool CONFIG_EISA y
-fi
-
-dep_bool 'TURBOchannel support' CONFIG_TC $CONFIG_DECSTATION
-#dep_bool 'Access.Bus support' CONFIG_ACCESSBUS $CONFIG_TC
-
-define_bool CONFIG_MCA n
-define_bool CONFIG_SBUS n
-
-bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
-
-if [ "$CONFIG_HOTPLUG" = "y" ] ; then
-   source drivers/pcmcia/Config.in
-   source drivers/hotplug/Config.in
-else
-   define_bool CONFIG_PCMCIA n
-   define_bool CONFIG_HOTPLUG_PCI n
-fi
-
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
-define_bool CONFIG_KCORE_ELF y
-define_bool CONFIG_KCORE_AOUT n
-define_bool CONFIG_BINFMT_AOUT n
-define_bool CONFIG_BINFMT_ELF y
-tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-
-dep_bool 'Power Management support (EXPERIMENTAL)' CONFIG_PM $CONFIG_EXPERIMENTAL $CONFIG_MIPS_AU1000
-endmenu
-
-source drivers/mtd/Config.in
-
-source drivers/parport/Config.in
-
-source drivers/pnp/Config.in
-
-source drivers/block/Config.in
-if [ "$CONFIG_BLK_DEV_INITRD" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'MIPS initrd options'
-   bool '  Embed root filesystem ramdisk into the kernel' CONFIG_EMBEDDED_RAMDISK
-   endmenu
-fi
-
-source drivers/md/Config.in
-
-if [ "$CONFIG_NET" = "y" ]; then
-   source net/Config.in
-fi
-
-source drivers/telephony/Config.in
-
-if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
-
-   mainmenu_option next_comment
-   comment 'ATA/IDE/MFM/RLL support'
-
-   tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
-
-   if [ "$CONFIG_IDE" != "n" ]; then
-      source drivers/ide/Config.in
-   else
-      define_bool CONFIG_BLK_DEV_IDE_MODES n
-      define_bool CONFIG_BLK_DEV_HD n
-   fi
-   endmenu
-fi
-
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
-if [ "$CONFIG_SCSI" != "n" ]; then
-   source drivers/scsi/Config.in
-fi
-endmenu
-
-if [ "$CONFIG_PCI" = "y" ]; then
-   source drivers/message/i2o/Config.in
-fi
-
-if [ "$CONFIG_NET" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Network device support'
-
-   bool 'Network device support' CONFIG_NETDEVICES
-   if [ "$CONFIG_NETDEVICES" = "y" ]; then
-      source drivers/net/Config.in
-      if [ "$CONFIG_ATM" = "y" ]; then
-	 source drivers/atm/Config.in
-      fi
-   fi
-   endmenu
-fi
-
-source net/ax25/Config.in
-
-source net/irda/Config.in
-
-if [ "$CONFIG_NET" != "n" ]; then
-   mainmenu_option next_comment
-   comment 'ISDN subsystem'
-
-   tristate 'ISDN support' CONFIG_ISDN
-   if [ "$CONFIG_ISDN" != "n" ]; then
-      source drivers/isdn/Config.in
-   fi
-   endmenu
-fi
-
-if [ "$CONFIG_ISA" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Old CD-ROM drivers (not SCSI, not IDE)'
-
-   bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
-   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
-      source drivers/cdrom/Config.in
-   fi
-   endmenu
-fi
-
-source drivers/char/Config.in
-
-#source drivers/misc/Config.in
-
-source drivers/media/Config.in
-
-if [ "$CONFIG_DECSTATION" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'DECStation Character devices'
-
-   tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
-   dep_bool '  DZ11 Serial Support' CONFIG_DZ $CONFIG_SERIAL
-   dep_bool '  Z85C30 Serial Support' CONFIG_ZS $CONFIG_SERIAL $CONFIG_TC
-   dep_bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE $CONFIG_SERIAL
-#   dep_bool 'MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
-   bool 'Enhanced Real Time Clock Support' CONFIG_RTC
-   endmenu
-fi
-
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'SGI Character devices'
-   if [ "$CONFIG_VT" = "y" ]; then
-      tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
-      if [ "$CONFIG_SGI_NEWPORT_CONSOLE" = "y" ]; then
-	 define_bool CONFIG_FONT_8x16 y
-      fi
-      define_bool CONFIG_DUMMY_CONSOLE y
-   fi
-   endmenu
-fi
-
-source fs/Config.in
-
-if [ "$CONFIG_VT" = "y" ]; then
-   mainmenu_option next_comment
-   comment 'Console drivers'
-   bool 'VGA text console' CONFIG_VGA_CONSOLE
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-      tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE
-      source drivers/video/Config.in
-   fi
-   endmenu
-fi
-
-mainmenu_option next_comment
-comment 'Sound'
-
-tristate 'Sound card support' CONFIG_SOUND
-if [ "$CONFIG_SOUND" != "n" ]; then
-   source drivers/sound/Config.in
-fi
-endmenu
-
-if [ "$CONFIG_SGI_IP22" = "y" ]; then
-   source drivers/sgi/Config.in
-fi
-
-source drivers/usb/Config.in
-
-source net/bluetooth/Config.in
-
-source drivers/input/Config.in
-
-mainmenu_option next_comment
-comment 'Kernel hacking'
-
-bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
-if [ "$CONFIG_SERIAL" = "y" -o "$CONFIG_AU1000_UART" = "y" ]; then
-  bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
-  dep_bool 'Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_REMOTE_DEBUG
-fi
-bool 'Enable run-time debugging' CONFIG_DEBUG
-bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
-if [ "$CONFIG_SMP" != "y" ]; then
-   bool 'Run uncached' CONFIG_MIPS_UNCACHED
-fi
-endmenu
+source arch/mips/config-shared.in

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)