patch-2.4.20 linux-2.4.20/arch/mips/momentum/ocelot_g/int-handler.S

Next file: linux-2.4.20/arch/mips/momentum/ocelot_g/irq.c
Previous file: linux-2.4.20/arch/mips/momentum/ocelot_g/gt64240_dep.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/mips/momentum/ocelot_g/int-handler.S linux-2.4.20/arch/mips/momentum/ocelot_g/int-handler.S
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ocelot board.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#define __ASSEMBLY__
+#include <linux/config.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+		.align	5
+		NESTED(ocelot_handle_int, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0, CP0_CAUSE
+		mfc0	t2, CP0_STATUS
+
+		and	t0, t2
+
+		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
+		bnez	t1, ll_pri_enet_irq
+		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
+		bnez	t1, ll_sec_enet_irq
+		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
+		bnez	t1, ll_uart_irq
+		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
+		bnez	t1, ll_cpci_irq
+		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
+		bnez	t1, ll_galileo_p0_irq
+		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
+		bnez	t1, ll_cputimer_irq
+
+                /* now look at the extended interrupts */
+		mfc0	t0, CP0_CAUSE
+		cfc0	t1, CP0_S1_INTCONTROL
+
+		/* shift the mask 8 bits left to line up the bits */
+		 sll	t2, t1, 8
+
+		 and	t0, t2
+		 srl	t0, t0, 16
+
+		 andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
+		bnez	t1, ll_galileo_p1_irq
+		 andi	t1, t0, STATUSF_IP9	/* int7 hardware line */
+		bnez	t1, ll_pmc_irq
+		 andi	t1, t0, STATUSF_IP10	/* int8 hardware line */
+		bnez	t1, ll_cpci_abcd_irq
+		 andi	t1, t0, STATUSF_IP11	/* int9 hardware line */
+		bnez	t1, ll_testpoint_irq
+
+		.set	reorder
+
+		/* wrong alarm or masked ... */
+		j	spurious_interrupt
+		nop
+		END(ocelot_handle_int)
+
+		.align	5
+ll_pri_enet_irq:
+		li	a0, 2
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_sec_enet_irq:
+		li	a0, 3
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_uart_irq:
+		li	a0, 4
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cpci_irq:
+		li	a0, 5
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_galileo_p0_irq:
+		li	a0, 6
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cputimer_irq:
+		li	a0, 7
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_galileo_p1_irq:
+		li	a0, 8
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pmc_irq:
+		li	a0, 9
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cpci_abcd_irq:
+		li	a0, 10
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_testpoint_irq:
+		li	a0, 11
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)