patch-2.4.20 linux-2.4.20/arch/ppc/kernel/idle_6xx.S

Next file: linux-2.4.20/arch/ppc/kernel/indirect_pci.c
Previous file: linux-2.4.20/arch/ppc/kernel/idle.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/ppc/kernel/idle_6xx.S linux-2.4.20/arch/ppc/kernel/idle_6xx.S
@@ -0,0 +1,224 @@
+/*
+ * BK Id: %F% %I% %G% %U% %#%
+ */
+/*
+ *  This file contains the power_save function for 6xx & 7xxx CPUs
+ *  rewritten in assembler
+ *
+ *  Warning ! This code assumes that if your machine has a 750fx
+ *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ *  if this is not the case some additional changes will have to
+ *  be done to check a runtime var (a bit like powersave-nap)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include "ppc_defs.h"
+
+#undef DEBUG
+
+	.text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * Make sure no rest of NAP mode remains in HID0, save default
+ * values for some CPU specific registers. Called with r24
+ * containing CPU number and r3 reloc offset
+ */
+ 	.globl	init_idle_6xx
+init_idle_6xx:
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,10,8	/* Clear NAP */
+	mtspr	SPRN_HID0, r4
+	b	1f
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	blr
+1:
+	slwi	r5,r24,2
+	add	r5,r5,r3
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_MSSCR0
+	addis	r6,r5, nap_save_msscr0@ha
+	stw	r4,nap_save_msscr0@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID1
+	addis	r6,r5,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+	.globl	power_save_6xx
+power_save_6xx:
+	/* Check if we can nap or doze, put HID0 mask in r3
+	 */
+	lis	r3, 0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	/* We must dynamically check for the NAP feature as it
+	 * can be cleared by CPU init after the fixups are done
+	 */
+	lis	r4,cur_cpu_spec@ha
+	lwz	r4,cur_cpu_spec@l(r4)
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+	andi.	r0,r4,CPU_FTR_CAN_NAP
+	beq	1f
+	/* Now check if user or arch enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpi	0,r4,0
+	beq	1f
+	lis	r3,HID0_NAP@h
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	cmpi	0,r3,0
+	beqlr
+
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* Check current->need_resched */
+	lwz	r4,NEED_RESCHED(r2)
+	cmpi	0,r4,0
+	beq+	1f
+	mtmsr	r7	/* out of line this ? */
+	blr
+1:	
+	/* Some pre-nap cleanups needed on some CPUs */
+	andis.	r0,r3,HID0_NAP@h
+	beq	2f
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+#ifdef DEBUG
+	lis	r6,nap_enter_count@ha
+	lwz	r4,nap_enter_count@l(r6)
+	addi	r4,r4,1
+	stw	r4,nap_enter_count@l(r6)
+#endif	
+2:
+BEGIN_FTR_SECTION
+	/* Go to low speed mode on some 750FX */
+	lis	r4,powersave_lowspeed@ha
+	lwz	r4,powersave_lowspeed@l(r4)
+	cmpi	0,r4,0
+	beq	1f
+	mfspr	r4,SPRN_HID1
+	oris	r4,r4,0x0001
+	mtspr	SPRN_HID1,r4
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+
+	/* Go to NAP or DOZE now */	
+	mfspr	r4,SPRN_HID0
+	lis	r5,(HID0_NAP|HID0_SLEEP)@h
+BEGIN_FTR_SECTION
+	oris	r5,r5,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	andc	r4,r4,r5
+	or	r4,r4,r3
+	oris	r4,r4,HID0_DPM@h	/* that should be done once for all ... */
+	mtspr	SPRN_HID0,r4
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	oris	r7,r7,MSR_POW@h
+	sync
+	isync
+	mtmsr	r7
+	.globl	power_save_6xx_ret
+power_save_6xx_ret:
+	isync
+	sync
+	blr
+	
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * we are called with DR/IR still off and r2 containing physical
+ * address of current.
+ */
+ 	.globl power_save_6xx_restore
+power_save_6xx_restore:
+	mfspr	r22,SPRN_HID0
+	rlwinm.	r22,r22,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
+	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
+BEGIN_FTR_SECTION
+	rlwinm	r22,r22,0,9,7	/* Clear DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	mtspr	SPRN_HID0, r22
+
+#ifdef DEBUG
+	beq	cr1,1f
+	lis	r22,(nap_return_count-KERNELBASE)@ha
+	lwz	r24,nap_return_count@l(r22)
+	addi	r24,r24,1
+	stw	r24,nap_return_count@l(r22)
+1:
+#endif
+	
+	lwz	r24,PROCESSOR(r2)
+	slwi	r24,r24,2
+	/* Todo make sure all these are in the same page
+	 * and load r22 (@ha part + CPU offset) only once
+	 */
+BEGIN_FTR_SECTION
+	beq	cr1,1f
+	addis	r22,r24,(nap_save_msscr0-KERNELBASE)@ha
+	lwz	r22,nap_save_msscr0@l(r22)
+	mtspr	SPRN_MSSCR0, r22
+	sync
+	isync
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	addis	r22,r24,(nap_save_hid1-KERNELBASE)@ha
+	lwz	r22,nap_save_hid1@l(r22)
+	mtspr	SPRN_HID1, r22
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	b	transfer_to_handler_cont
+
+	.data
+
+	.globl nap_save_msscr0
+nap_save_msscr0:
+	.space	4*NR_CPUS
+
+	.globl nap_save_hid1
+nap_save_hid1:
+	.space	4*NR_CPUS
+
+#ifdef DEBUG
+	.globl nap_enter_count
+nap_enter_count:
+	.space	4
+	.globl nap_return_count
+nap_return_count:
+	.space	4
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)