patch-2.4.20 linux-2.4.20/arch/ppc/platforms/chrp_pci.c

Next file: linux-2.4.20/arch/ppc/platforms/chrp_setup.c
Previous file: linux-2.4.20/arch/ppc/platforms/bseip.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/ppc/platforms/chrp_pci.c linux-2.4.20/arch/ppc/platforms/chrp_pci.c
@@ -0,0 +1,322 @@
+/*
+ * BK Id: %F% %I% %G% %U% %#%
+ */
+/*
+ * CHRP pci routines.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+
+/* LongTrail */
+unsigned long gg2_pci_config_base;
+
+#define pci_config_addr(dev, offset) \
+(gg2_pci_config_base | ((dev->bus->number)<<16) | ((dev->devfn)<<8) | (offset))
+
+volatile struct Hydra *Hydra = NULL;
+
+/*
+ * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
+ * limit the bus number to 3 bits
+ */
+
+#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
+#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
+
+#define cfg_read_bad(val, size)		*val = bad_##size;
+#define cfg_write_bad(val, size)
+
+#define bad_byte	0xff
+#define bad_word	0xffff
+#define bad_dword	0xffffffffU
+
+#define GG2_PCI_OP(rw, size, type, op)					    \
+int __chrp gg2_##rw##_config_##size(struct pci_dev *dev, int off, type val) \
+{									    \
+	if (dev->bus->number > 7) {					    \
+		cfg_##rw##_bad(val, size)				    \
+		return PCIBIOS_DEVICE_NOT_FOUND;			    \
+	}								    \
+	cfg_##rw(val, pci_config_addr(dev, off), type, op);		    \
+	return PCIBIOS_SUCCESSFUL;					    \
+}
+
+GG2_PCI_OP(read, byte, u8 *, in_8)
+GG2_PCI_OP(read, word, u16 *, in_le16)
+GG2_PCI_OP(read, dword, u32 *, in_le32)
+GG2_PCI_OP(write, byte, u8, out_8)
+GG2_PCI_OP(write, word, u16, out_le16)
+GG2_PCI_OP(write, dword, u32, out_le32)
+
+static struct pci_ops gg2_pci_ops =
+{
+	gg2_read_config_byte,
+	gg2_read_config_word,
+	gg2_read_config_dword,
+	gg2_write_config_byte,
+	gg2_write_config_word,
+	gg2_write_config_dword
+};
+
+/*
+ * Access functions for PCI config space on IBM "python" host bridges.
+ */
+#define PYTHON_CFA(b, d, o)	(0x80 | ((b) << 8) | ((d) << 16) \
+				 | (((o) & ~3) << 24))
+
+#define PYTHON_PCI_OP(rw, size, type, op, mask)			    	     \
+int __chrp								     \
+python_##rw##_config_##size(struct pci_dev *dev, int offset, type val) 	     \
+{									     \
+	struct pci_controller *hose = dev->sysdata;			     \
+									     \
+	out_be32(hose->cfg_addr,					     \
+		 PYTHON_CFA(dev->bus->number, dev->devfn, offset));	     \
+	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);   	     \
+	return PCIBIOS_SUCCESSFUL;					     \
+}
+
+PYTHON_PCI_OP(read, byte, u8 *, in_8, 3)
+PYTHON_PCI_OP(read, word, u16 *, in_le16, 2)
+PYTHON_PCI_OP(read, dword, u32 *, in_le32, 0)
+PYTHON_PCI_OP(write, byte, u8, out_8, 3)
+PYTHON_PCI_OP(write, word, u16, out_le16, 2)
+PYTHON_PCI_OP(write, dword, u32, out_le32, 0)
+
+static struct pci_ops python_pci_ops =
+{
+	python_read_config_byte,
+	python_read_config_word,
+	python_read_config_dword,
+	python_write_config_byte,
+	python_write_config_word,
+	python_write_config_dword
+};
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+#define RTAS_PCI_READ_OP(size, type, nbytes)			    	  \
+int __chrp								  \
+rtas_read_config_##size(struct pci_dev *dev, int offset, type val) 	  \
+{									  \
+	unsigned long addr = (offset & 0xff) | ((dev->devfn & 0xff) << 8) \
+		| ((dev->bus->number & 0xff) << 16);			  \
+	unsigned long ret = ~0UL;					  \
+	int rval;							  \
+									  \
+	rval = call_rtas("read-pci-config", 2, 2, &ret, addr, nbytes);	  \
+	*val = ret;							  \
+	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;    	  \
+}
+
+#define RTAS_PCI_WRITE_OP(size, type, nbytes)				  \
+int __chrp								  \
+rtas_write_config_##size(struct pci_dev *dev, int offset, type val)	  \
+{									  \
+	unsigned long addr = (offset & 0xff) | ((dev->devfn & 0xff) << 8) \
+		| ((dev->bus->number & 0xff) << 16);			  \
+	int rval;							  \
+									  \
+	rval = call_rtas("write-pci-config", 3, 1, NULL,		  \
+			 addr, nbytes, (ulong)val);			  \
+	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;	  \
+}
+
+RTAS_PCI_READ_OP(byte, u8 *, 1)
+RTAS_PCI_READ_OP(word, u16 *, 2)
+RTAS_PCI_READ_OP(dword, u32 *, 4)
+RTAS_PCI_WRITE_OP(byte, u8, 1)
+RTAS_PCI_WRITE_OP(word, u16, 2)
+RTAS_PCI_WRITE_OP(dword, u32, 4)
+
+static struct pci_ops rtas_pci_ops =
+{
+	rtas_read_config_byte,
+	rtas_read_config_word,
+	rtas_read_config_dword,
+	rtas_write_config_byte,
+	rtas_write_config_word,
+	rtas_write_config_dword
+};
+
+int __init
+hydra_init(void)
+{
+	struct device_node *np;
+
+	np = find_devices("mac-io");
+	if (np == NULL || np->n_addrs == 0)
+		return 0;
+	Hydra = ioremap(np->addrs[0].address, np->addrs[0].size);
+	printk("Hydra Mac I/O at %x\n", np->addrs[0].address);
+	out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
+					   HYDRA_FC_SCSI_CELL_EN |
+					   HYDRA_FC_SCCA_ENABLE |
+					   HYDRA_FC_SCCB_ENABLE |
+					   HYDRA_FC_ARB_BYPASS |
+					   HYDRA_FC_MPIC_ENABLE |
+					   HYDRA_FC_SLOW_SCC_PCLK |
+					   HYDRA_FC_MPIC_IS_MASTER));
+	return 1;
+}
+
+void __init
+chrp_pcibios_fixup(void)
+{
+	struct pci_dev *dev;
+	struct device_node *np;
+
+	/* PCI interrupts are controlled by the OpenPIC */
+	pci_for_each_dev(dev) {
+		np = pci_device_to_OF_node(dev);
+		if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
+			dev->irq = np->intrs[0].line;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	}
+}
+
+#define PRG_CL_RESET_VALID 0x00010000
+
+static void __init
+setup_python(struct pci_controller *hose, struct device_node *dev)
+{
+	u32 *reg, val;
+	volatile unsigned char *cfg;
+
+	hose->ops = &python_pci_ops;
+	cfg = ioremap(dev->addrs[0].address + 0xf8000, 0x20);
+	hose->cfg_addr = (volatile unsigned int *) cfg;
+	hose->cfg_data = cfg + 0x10;
+
+	/* Clear the magic go-slow bit */
+	reg = (u32 *) ioremap(dev->addrs[0].address + 0xf6000, 0x40);
+	val = in_be32(&reg[12]);
+	if (val & PRG_CL_RESET_VALID) {
+		out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
+		in_be32(&reg[12]);
+	}
+	iounmap(reg);
+}
+
+void __init
+chrp_find_bridges(void)
+{
+	struct device_node *dev;
+	int *bus_range;
+	int len, index = -1;
+	struct pci_controller *hose;
+	unsigned int *dma;
+	char *model, *machine;
+	int is_longtrail = 0, is_mot = 0;
+	struct device_node *root = find_path_device("/");
+
+	/*
+	 * The PCI host bridge nodes on some machines don't have
+	 * properties to adequately identify them, so we have to
+	 * look at what sort of machine this is as well.
+	 */
+	machine = get_property(root, "model", NULL);
+	if (machine != NULL) {
+		is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
+		is_mot = strncmp(machine, "MOT", 3) == 0;
+	}
+	for (dev = root->child; dev != NULL; dev = dev->sibling) {
+		if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
+			continue;
+		++index;
+		/* The GG2 bridge on the LongTrail doesn't have an address */
+		if (dev->n_addrs < 1 && !is_longtrail) {
+			printk(KERN_WARNING "Can't use %s: no address\n",
+			       dev->full_name);
+			continue;
+		}
+		bus_range = (int *) get_property(dev, "bus-range", &len);
+		if (bus_range == NULL || len < 2 * sizeof(int)) {
+			printk(KERN_WARNING "Can't get bus-range for %s\n",
+				dev->full_name);
+			continue;
+		}
+		if (bus_range[1] == bus_range[0])
+			printk(KERN_INFO "PCI bus %d", bus_range[0]);
+		else
+			printk(KERN_INFO "PCI buses %d..%d",
+			       bus_range[0], bus_range[1]);
+		printk(" controlled by %s", dev->type);
+		if (dev->n_addrs > 0)
+			printk(" at %x", dev->addrs[0].address);
+		printk("\n");
+
+		hose = pcibios_alloc_controller();
+		if (!hose) {
+			printk("Can't allocate PCI controller structure for %s\n",
+				dev->full_name);
+			continue;
+		}
+		hose->arch_data = dev;
+		hose->first_busno = bus_range[0];
+		hose->last_busno = bus_range[1];
+
+		model = get_property(dev, "model", NULL);
+		if (model == NULL)
+			model = "<none>";
+		if (device_is_compatible(dev, "IBM,python")) {
+			setup_python(hose, dev);
+		} else if (is_mot
+			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
+			setup_grackle(hose);
+		} else if (is_longtrail) {
+			hose->ops = &gg2_pci_ops;
+			gg2_pci_config_base = (unsigned long)
+				ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
+		} else if (!strncmp(model, "IBM,CPC710", 10)) {
+			setup_indirect_pci(hose,
+				dev->addrs[0].address + 0x000f8000,
+				dev->addrs[0].address + 0x000f8010);
+			if (index == 0) {
+				dma = (unsigned int *)
+					get_property(dev, "system-dma-base", &len);
+			 	if (dma && len >= sizeof(*dma)) {
+					dma = (unsigned int *)(((unsigned long)dma) +
+						len - sizeof(*dma));
+					pci_dram_offset = *dma;
+				}
+			}
+		} else {
+			printk("No methods for %s (model %s), using RTAS\n",
+			       dev->full_name, model);
+			hose->ops = &rtas_pci_ops;
+		}
+
+		pci_process_bridge_OF_ranges(hose, dev, index == 0);
+
+		/* check the first bridge for a property that we can
+		   use to set pci_dram_offset */
+		dma = (unsigned int *)
+			get_property(dev, "ibm,dma-ranges", &len);
+		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
+			pci_dram_offset = dma[2] - dma[3];
+			printk("pci_dram_offset = %lx\n", pci_dram_offset);
+		}
+	}
+
+	ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)