patch-2.4.20 linux-2.4.20/drivers/char/amd76x_pm.c
Next file: linux-2.4.20/drivers/char/amd76x_pm.h
Previous file: linux-2.4.20/drivers/char/alim7101_wdt.c
Back to the patch index
Back to the overall index
- Lines: 689
- Date:
Thu Nov 28 15:53:12 2002
- Orig file:
linux-2.4.19/drivers/char/amd76x_pm.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.19/drivers/char/amd76x_pm.c linux-2.4.20/drivers/char/amd76x_pm.c
@@ -0,0 +1,688 @@
+/*
+ * ACPI sytle PM for SMP AMD-760MP(X) based systems.
+ * For use until the ACPI project catches up. :-)
+ *
+ * Copyright (C) 2002 Johnathan Hicks <thetech@folkwolf.net>
+ *
+ * History:
+ *
+ * 20020702 - amd-smp-idle: Tony Lindgren <tony@atomide.com>
+ * Influenced by Vcool, and LVCool. Rewrote everything from scratch to
+ * use the PCI features in Linux, and to support SMP systems. Provides
+ * C2 idling on SMP AMD-760MP systems.
+ *
+ * 20020722: JH
+ * I adapted Tony's code for the AMD-765/766 southbridge and adapted it
+ * according to the AMD-768 data sheet to provide the same capability for
+ * SMP AMD-760MPX systems. Posted to acpi-devel list.
+ *
+ * 20020722: Alan Cox
+ * Replaces non-functional amd76x_pm code in -ac tree.
+ *
+ * 20020730: JH
+ * Added ability to do normal throttling (the non-thermal kind), C3 idling
+ * and Power On Suspend (S1 sleep). It would be very easy to tie swsusp
+ * into activate_amd76x_SLP(). C3 idling doesn't happen yet; see my note
+ * in amd76x_smp_idle(). I've noticed that when NTH and idling are both
+ * enabled, my hardware locks and requires a hard reset, so I have
+ * #ifndefed around the idle loop setting to prevent this. POS locks it up
+ * too, both ought to be fixable. I've also noticed that idling and NTH
+ * make some interference that is picked up by the onboard sound chip on
+ * my ASUS A7M266-D motherboard.
+ *
+ *
+ * TODO: Thermal throttling (TTH).
+ * /proc interface for normal throttling level.
+ * /proc interface for POS.
+ *
+ *
+ * <Notes from 20020722-ac revision>
+ *
+ * Processor idle mode module for AMD SMP 760MP(X) based systems
+ *
+ * Copyright (C) 2002 Tony Lindgren <tony@atomide.com>
+ * Johnathan Hicks (768 support)
+ *
+ * Using this module saves about 70 - 90W of energy in the idle mode compared
+ * to the default idle mode. Waking up from the idle mode is fast to keep the
+ * system response time good. Currently no CPU load calculation is done, the
+ * system exits the idle mode if the idle function runs twice on the same
+ * processor in a row. This only works on SMP systems, but maybe the idle mode
+ * enabling can be integrated to ACPI to provide C2 mode at some point.
+ *
+ * NOTE: Currently there's a bug somewhere where the reading the
+ * P_LVL2 for the first time causes the system to sleep instead of
+ * idling. This means that you need to hit the power button once to
+ * wake the system after loading the module for the first time after
+ * reboot. After that the system idles as supposed.
+ *
+ *
+ * Influenced by Vcool, and LVCool. Rewrote everything from scratch to
+ * use the PCI features in Linux, and to support SMP systems.
+ *
+ * Currently only tested on a TYAN S2460 (760MP) system (Tony) and an
+ * ASUS A7M266-D (760MPX) system (Johnathan). Adding support for other Athlon
+ * SMP or single processor systems should be easy if desired.
+ *
+ * This software is licensed under GNU General Public License Version 2
+ * as specified in file COPYING in the Linux kernel source tree main
+ * directory.
+ *
+ * </Notes from 20020722-ac revision>
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include "amd76x_pm.h"
+
+#define VERSION "20020730"
+
+// #define AMD76X_C3 1
+// #define AMD76X_NTH 1
+// #define AMD76X_POS 1
+
+
+extern void default_idle(void);
+static void amd76x_smp_idle(void);
+static int amd76x_pm_main(void);
+static int __devinit amd_nb_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static void amd_nb_remove(struct pci_dev *pdev);
+static int __devinit amd_sb_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static void amd_sb_remove(struct pci_dev *pdev);
+
+
+static struct pci_dev *pdev_nb;
+static struct pci_dev *pdev_sb;
+
+struct PM_cfg {
+ unsigned int status_reg;
+ unsigned int C2_reg;
+ unsigned int C3_reg;
+ unsigned int NTH_reg;
+ unsigned int slp_reg;
+ unsigned int resume_reg;
+ void (*orig_idle) (void);
+ void (*curr_idle) (void);
+ unsigned long C2_cnt, C3_cnt;
+ int last_pr;
+};
+static struct PM_cfg amd76x_pm_cfg;
+
+struct cpu_idle_state {
+ int idle;
+ int count;
+};
+static struct cpu_idle_state prs[2];
+
+static struct pci_device_id amd_nb_tbl[] __devinitdata = {
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,}
+};
+
+static struct pci_device_id amd_sb_tbl[] __devinitdata = {
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413, PCI_ANY_ID, PCI_ANY_ID,},
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7443, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,}
+};
+
+static struct pci_driver amd_nb_driver = {
+ name:"amd76x_pm-nb",
+ id_table:amd_nb_tbl,
+ probe:amd_nb_init,
+ remove:__devexit_p(amd_nb_remove),
+};
+
+static struct pci_driver amd_sb_driver = {
+ name:"amd76x_pm-sb",
+ id_table:amd_sb_tbl,
+ probe:amd_sb_init,
+ remove:__devexit_p(amd_sb_remove),
+};
+
+
+static int __devinit
+amd_nb_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ pdev_nb = pdev;
+ printk(KERN_INFO "amd76x_pm: Initializing northbridge %s\n",
+ pdev_nb->name);
+
+ return 0;
+}
+
+
+static void __devexit
+amd_nb_remove(struct pci_dev *pdev)
+{
+}
+
+
+static int __devinit
+amd_sb_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ pdev_sb = pdev;
+ printk(KERN_INFO "amd76x_pm: Initializing southbridge %s\n",
+ pdev_sb->name);
+
+ return 0;
+}
+
+
+static void __devexit
+amd_sb_remove(struct pci_dev *pdev)
+{
+}
+
+
+/*
+ * Configures the AMD-762 northbridge to support PM calls
+ */
+static int
+config_amd762(int enable)
+{
+ unsigned int regdword;
+
+ /* Enable STPGNT in BIU Status/Control for cpu0 */
+ pci_read_config_dword(pdev_nb, 0x60, ®dword);
+ regdword |= (1 << 17);
+ pci_write_config_dword(pdev_nb, 0x60, regdword);
+
+ /* Enable STPGNT in BIU Status/Control for cpu1 */
+ pci_read_config_dword(pdev_nb, 0x68, ®dword);
+ regdword |= (1 << 17);
+ pci_write_config_dword(pdev_nb, 0x68, regdword);
+
+ /* DRAM refresh enable */
+ pci_read_config_dword(pdev_nb, 0x58, ®dword);
+ regdword &= ~(1 << 19);
+ pci_write_config_dword(pdev_nb, 0x58, regdword);
+
+ /* Self refresh enable */
+ pci_read_config_dword(pdev_nb, 0x70, ®dword);
+ regdword |= (1 << 18);
+ pci_write_config_dword(pdev_nb, 0x70, regdword);
+
+ return 0;
+}
+
+
+/*
+ * Get the base PMIO address and set the pm registers in amd76x_pm_cfg.
+ */
+static void
+amd76x_get_PM(void)
+{
+ unsigned int regdword;
+
+ /* Get the address for pm status, P_LVL2, etc */
+ pci_read_config_dword(pdev_sb, 0x58, ®dword);
+ regdword &= 0xff80;
+ amd76x_pm_cfg.status_reg = (regdword + 0x00);
+ amd76x_pm_cfg.slp_reg = (regdword + 0x04);
+ amd76x_pm_cfg.NTH_reg = (regdword + 0x10);
+ amd76x_pm_cfg.C2_reg = (regdword + 0x14);
+ amd76x_pm_cfg.C3_reg = (regdword + 0x15);
+ amd76x_pm_cfg.resume_reg = (regdword + 0x16); /* N/A for 768 */
+}
+
+
+/*
+ * En/Disable PMIO and configure W4SG & STPGNT.
+ */
+static int
+config_PMIO_amd76x(int is_766, int enable)
+{
+ unsigned char regbyte;
+
+ /* Clear W4SG, and set PMIOEN, if using a 765/766 set STPGNT as well.
+ * AMD-766: C3A41; page 59 in AMD-766 doc
+ * AMD-768: DevB:3x41C; page 94 in AMD-768 doc */
+ pci_read_config_byte(pdev_sb, 0x41, ®byte);
+ if(enable) {
+ regbyte |= ((0 << 0) | (is_766?1:0 << 1) | (1 << 7));
+ }
+ else {
+ regbyte |= (0 << 7);
+ }
+ pci_write_config_byte(pdev_sb, 0x41, regbyte);
+
+ return 0;
+}
+
+/*
+ * C2 idle support for AMD-766.
+ */
+static void
+config_amd766_C2(int enable)
+{
+ unsigned int regdword;
+
+ /* Set C2 options in C3A50, page 63 in AMD-766 doc */
+ pci_read_config_dword(pdev_sb, 0x50, ®dword);
+ if(enable) {
+ regdword &= ~((DCSTOP_EN | CPUSTP_EN | PCISTP_EN | SUSPND_EN |
+ CPURST_EN) << C2_REGS);
+ regdword |= (STPCLK_EN /* ~ 20 Watt savings max */
+ | CPUSLP_EN) /* Additional ~ 70 Watts max! */
+ << C2_REGS;
+ }
+ else
+ regdword &= ~((STPCLK_EN | CPUSLP_EN) << C2_REGS);
+ pci_write_config_dword(pdev_sb, 0x50, regdword);
+}
+
+
+#ifdef AMD76X_C3
+/*
+ * Untested C3 idle support for AMD-766.
+ */
+static void
+config_amd766_C3(int enable)
+{
+ unsigned int regdword;
+
+ /* Set C3 options in C3A50, page 63 in AMD-766 doc */
+ pci_read_config_dword(pdev_sb, 0x50, ®dword);
+ if(enable) {
+ regdword &= ~((DCSTOP_EN | PCISTP_EN | SUSPND_EN | CPURST_EN)
+ << C3_REGS);
+ regdword |= (STPCLK_EN /* ~ 20 Watt savings max */
+ | CPUSLP_EN /* Additional ~ 70 Watts max! */
+ | CPUSTP_EN) /* yet more savings! */
+ << C3_REGS;
+ }
+ else
+ regdword &= ~((STPCLK_EN | CPUSLP_EN | CPUSTP_EN) << C3_REGS);
+ pci_write_config_dword(pdev_sb, 0x50, regdword);
+}
+#endif
+
+
+#ifdef AMD76X_POS
+static void
+config_amd766_POS(int enable)
+{
+ unsigned int regdword;
+
+ /* Set C3 options in C3A50, page 63 in AMD-766 doc */
+ pci_read_config_dword(pdev_sb, 0x50, ®dword);
+ if(enable) {
+ regdword &= ~((ZZ_CACHE_EN | CPURST_EN) << POS_REGS);
+ regdword |= ((DCSTOP_EN | STPCLK_EN | CPUSTP_EN | PCISTP_EN |
+ CPUSLP_EN | SUSPND_EN) << POS_REGS);
+ }
+ else
+ regdword ^= (0xff << POS_REGS);
+ pci_write_config_dword(pdev_sb, 0x50, regdword);
+}
+#endif
+
+
+/*
+ * Configures the 765 & 766 southbridges.
+ */
+static int
+config_amd766(int enable)
+{
+ amd76x_get_PM();
+ config_PMIO_amd76x(1, 1);
+
+ config_amd766_C2(enable);
+#ifdef AMD76X_C3
+ config_amd766_C3(enable);
+#endif
+#ifdef AMD76X_POS
+ config_amd766_POS(enable);
+#endif
+
+ return 0;
+}
+
+
+/*
+ * C2 idling support for AMD-768.
+ */
+static void
+config_amd768_C2(int enable)
+{
+ unsigned char regbyte;
+
+ /* Set C2 options in DevB:3x4F, page 100 in AMD-768 doc */
+ pci_read_config_byte(pdev_sb, 0x4F, ®byte);
+ if(enable)
+ regbyte |= C2EN;
+ else
+ regbyte ^= C2EN;
+ pci_write_config_byte(pdev_sb, 0x4F, regbyte);
+}
+
+
+#ifdef AMD76X_C3
+/*
+ * C3 idle support for AMD-768. The idle loop would need some extra
+ * handling for C3, but it would make more sense for ACPI to handle CX level
+ * transitions like it is supposed to. Unfortunately ACPI doesn't do CX
+ * levels on SMP systems yet.
+ */
+static void
+config_amd768_C3(int enable)
+{
+ unsigned char regbyte;
+
+ /* Set C3 options in DevB:3x4F, page 100 in AMD-768 doc */
+ pci_read_config_byte(pdev_sb, 0x4F, ®byte);
+ if(enable)
+ regbyte |= (C3EN /* | ZZ_C3EN | CSLP_C3EN | CSTP_C3EN */);
+ else
+ regbyte ^= C3EN;
+ pci_write_config_byte(pdev_sb, 0x4F, regbyte);
+}
+#endif
+
+
+#ifdef AMD76X_POS
+/*
+ * Untested Power On Suspend support for AMD-768. This should also be handled
+ * by ACPI.
+ */
+static void
+config_amd768_POS(int enable)
+{
+ unsigned int regdword;
+
+ /* Set POS options in DevB:3x50, page 101 in AMD-768 doc */
+ pci_read_config_dword(pdev_sb, 0x50, ®dword);
+ if(enable)
+ regdword |= (POSEN | CSTP | PSTP | ASTP | DCSTP | CSLP | SUSP);
+ else
+ regdword ^= POSEN;
+ pci_write_config_dword(pdev_sb, 0x50, regdword);
+}
+#endif
+
+
+#ifdef AMD76X_NTH
+/*
+ * Normal Throttling support for AMD-768. There are several settings
+ * that can be set depending on how long you want some of the delays to be.
+ * I'm not sure if this is even neccessary at all as the 766 doesn't need this.
+ */
+static void
+config_amd768_NTH(int enable, int ntper, int thminen)
+{
+ unsigned char regbyte;
+
+ /* DevB:3x40, pg 93 of 768 doc */
+ pci_read_config_byte(pdev_sb, 0x40, ®byte);
+ /* Is it neccessary to use THMINEN at ANY time? */
+ regbyte |= (NTPER(ntper) | THMINEN(thminen));
+ pci_write_config_byte(pdev_sb, 0x40, regbyte);
+}
+#endif
+
+
+/*
+ * Configures the 768 southbridge to support idle calls, and gets
+ * the processor idle call register location.
+ */
+static int
+config_amd768(int enable)
+{
+ amd76x_get_PM();
+ config_PMIO_amd76x(0, 1);
+
+ config_amd768_C2(enable);
+#ifdef AMD76X_C3
+ config_amd768_C3(enable);
+#endif
+#ifdef AMD76X_POS
+ config_amd768_POS(enable);
+#endif
+#ifdef AMD76X_NTH
+ config_amd768_NTH(enable, 1, 2);
+#endif
+
+ return 0;
+}
+
+
+#ifdef AMD76X_NTH
+/*
+ * Activate normal throttling via its ACPI register (P_CNT).
+ */
+static void
+activate_amd76x_NTH(int enable, int ratio)
+{
+ unsigned int regdword;
+
+ /* PM10, pg 110 of 768 doc, pg 70 of 766 doc */
+ regdword=inl(amd76x_pm_cfg.NTH_reg);
+ if(enable)
+ regdword |= (NTH_EN | NTH_RATIO(ratio));
+ else
+ regdword ^= NTH_EN;
+ outl(regdword, amd76x_pm_cfg.NTH_reg);
+}
+#endif
+
+
+/*
+ * Activate sleep state via its ACPI register (PM1_CNT).
+ */
+static void
+activate_amd76x_SLP(int type)
+{
+ unsigned short regshort;
+
+ /* PM04, pg 109 of 768 doc, pg 69 of 766 doc */
+ regshort=inw(amd76x_pm_cfg.slp_reg);
+ regshort |= (SLP_EN | SLP_TYP(type)) ;
+ outw(regshort, amd76x_pm_cfg.slp_reg);
+}
+
+
+#ifdef AMD76X_POS
+/*
+ * Wrapper function to activate POS sleep state.
+ */
+static void
+activate_amd76x_POS(void)
+{
+ activate_amd76x_SLP(1);
+}
+#endif
+
+
+#if 0
+/*
+ * Idle loop for single processor systems
+ */
+void
+amd76x_up_idle(void)
+{
+ // FIXME: Optionally add non-smp idle loop here
+}
+#endif
+
+
+/*
+ * Idle loop for SMP systems, supports currently only 2 processors.
+ *
+ * Note; for 2.5 folks - not pre-empt safe
+ */
+static void
+amd76x_smp_idle(void)
+{
+
+ /*
+ * Exit idle mode immediately if the CPU does not change.
+ * Usually that means that we have some load on another CPU.
+ */
+ if (prs[0].idle && prs[1].idle && amd76x_pm_cfg.last_pr == smp_processor_id()) {
+ prs[0].idle = 0;
+ prs[1].idle = 0;
+ /* This looks redundent as it was just checked in the if() */
+ /* amd76x_pm_cfg.last_pr = smp_processor_id(); */
+ return;
+ }
+
+ prs[smp_processor_id()].count++;
+
+ /* Don't start the idle mode immediately */
+ if (prs[smp_processor_id()].count >= LAZY_IDLE_DELAY) {
+
+ /* Put the current processor into idle mode */
+ prs[smp_processor_id()].idle =
+ (prs[smp_processor_id()].idle ? 2 : 1);
+
+ /* Only idle if both processors are idle */
+ if ((prs[0].idle==1) && (prs[1].idle==1)) {
+ amd76x_pm_cfg.C2_cnt++;
+ inb(amd76x_pm_cfg.C2_reg);
+ }
+ #ifdef AMD76X_C3
+ /*
+ * JH: I've not been able to get into here. Could this have
+ * something to do with the way the kernel handles the idle
+ * loop, or and error that I've made?
+ */
+ else if ((prs[0].idle==2) && (prs[1].idle==2)) {
+ amd76x_pm_cfg.C3_cnt++;
+ inb(amd76x_pm_cfg.C3_reg);
+ }
+ #endif
+
+ prs[smp_processor_id()].count = 0;
+
+ }
+ amd76x_pm_cfg.last_pr = smp_processor_id();
+}
+
+
+/*
+ * Finds and initializes the bridges, and then sets the idle function
+ */
+static int
+amd76x_pm_main(void)
+{
+ int found;
+
+ /* Find northbridge */
+ found = pci_module_init(&amd_nb_driver);
+ if (found < 0) {
+ printk(KERN_ERR "amd76x_pm: Could not find northbridge\n");
+ return 1;
+ }
+
+ /* Find southbridge */
+ found = pci_module_init(&amd_sb_driver);
+ if (found < 0) {
+ printk(KERN_ERR "amd76x_pm: Could not find southbridge\n");
+ pci_unregister_driver(&amd_nb_driver);
+ return 1;
+ }
+
+ /* Init southbridge */
+ switch (pdev_sb->device) {
+ case PCI_DEVICE_ID_AMD_VIPER_7413: /* AMD-765 or 766 */
+ config_amd766(1);
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7443: /* AMD-768 */
+ config_amd768(1);
+ break;
+ default:
+ printk(KERN_ERR "amd76x_pm: No southbridge to initialize\n");
+ break;
+ }
+
+ /* Init northbridge and queue the new idle function */
+ switch (pdev_nb->device) {
+ case PCI_DEVICE_ID_AMD_FE_GATE_700C: /* AMD-762 */
+ config_amd762(1);
+#ifndef AMD76X_NTH
+ amd76x_pm_cfg.curr_idle = amd76x_smp_idle;
+#endif
+ break;
+ default:
+ printk(KERN_ERR "amd76x_pm: No northbridge to initialize\n");
+ break;
+ }
+
+#ifndef AMD76X_NTH
+ if (!amd76x_pm_cfg.curr_idle) {
+ printk(KERN_ERR "amd76x_pm: Idle function not changed\n");
+ return 1;
+ }
+
+ amd76x_pm_cfg.orig_idle = pm_idle;
+ pm_idle = amd76x_pm_cfg.curr_idle;
+#endif
+
+#ifdef AMD76X_NTH
+ /* Turn NTH on with maxium throttling for testing. */
+ activate_amd76x_NTH(1, 1);
+#endif
+
+#ifdef AMD76X_POS
+ /* Testing here only. */
+ activate_amd76x_POS();
+#endif
+
+ return 0;
+}
+
+
+static int __init
+amd76x_pm_init(void)
+{
+ printk(KERN_INFO "amd76x_pm: Version %s\n", VERSION);
+ return amd76x_pm_main();
+}
+
+
+static void __exit
+amd76x_pm_cleanup(void)
+{
+#ifndef AMD76X_NTH
+ pm_idle = amd76x_pm_cfg.orig_idle;
+
+ /* This isn't really needed. */
+ printk(KERN_INFO "amd76x_pm: %lu C2 calls\n", amd76x_pm_cfg.C2_cnt);
+#ifdef AMD76X_C3
+ printk(KERN_INFO "amd76x_pm: %lu C3 calls\n", amd76x_pm_cfg.C3_cnt);
+#endif
+
+ /*
+ * FIXME: We want to wait until all CPUs have set the new
+ * idle function, otherwise we will oops. This may not be
+ * the right way to do it, but seems to work.
+ *
+ * - Best answer is going to be to ban unload, but when its debugged
+ * --- Alan
+ */
+ schedule();
+ mdelay(1000);
+#endif
+
+#ifdef AMD76X_NTH
+ /* Turn NTH off*/
+ activate_amd76x_NTH(0, 0);
+#endif
+
+ pci_unregister_driver(&amd_nb_driver);
+ pci_unregister_driver(&amd_sb_driver);
+
+}
+
+
+MODULE_LICENSE("GPL");
+module_init(amd76x_pm_init);
+module_exit(amd76x_pm_cleanup);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)