patch-2.4.20 linux-2.4.20/drivers/usb/usblcd.c
Next file: linux-2.4.20/drivers/usb/usbnet.c
Previous file: linux-2.4.20/drivers/usb/usbkbd.c
Back to the patch index
Back to the overall index
- Lines: 348
- Date:
Thu Nov 28 15:53:15 2002
- Orig file:
linux-2.4.19/drivers/usb/usblcd.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.19/drivers/usb/usblcd.c linux-2.4.20/drivers/usb/usblcd.c
@@ -0,0 +1,347 @@
+/*****************************************************************************
+ * USBLCD Kernel Driver *
+ * See http://www.usblcd.de for Hardware and Documentation. *
+ * Version 1.03 *
+ * (C) 2002 Adams IT Services <info@usblcd.de> *
+ * *
+ * This file is licensed under the GPL. See COPYING in the package. *
+ * Based on rio500.c by Cesar Miquel (miquel@df.uba.ar) which is based on *
+ * hp_scanner.c by David E. Nelson (dnelson@jump.net) *
+ * *
+ * 23.7.02 RA changed minor device number to the official assigned one *
+ * 18.9.02 RA Vendor ID change, longer timeouts *
+ *****************************************************************************/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+
+#define DRIVER_VERSION "USBLCD Driver Version 1.03"
+
+#define USBLCD_MINOR 144
+
+#define IOCTL_GET_HARD_VERSION 1
+#define IOCTL_GET_DRV_VERSION 2
+
+/* stall/wait timeout for USBLCD */
+#define NAK_TIMEOUT (10*HZ)
+
+#define IBUF_SIZE 0x1000
+#define OBUF_SIZE 0x10000
+
+struct lcd_usb_data {
+ struct usb_device *lcd_dev; /* init: probe_lcd */
+ unsigned int ifnum; /* Interface number of the USB device */
+ int isopen; /* nz if open */
+ int present; /* Device is present on the bus */
+ char *obuf, *ibuf; /* transfer buffers */
+ char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
+ wait_queue_head_t wait_q; /* for timeouts */
+};
+
+static struct lcd_usb_data lcd_instance;
+
+static int open_lcd(struct inode *inode, struct file *file)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+
+ if (lcd->isopen || !lcd->present) {
+ return -EBUSY;
+ }
+ lcd->isopen = 1;
+
+ init_waitqueue_head(&lcd->wait_q);
+
+ info("USBLCD opened.");
+
+ return 0;
+}
+
+static int close_lcd(struct inode *inode, struct file *file)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+
+ lcd->isopen = 0;
+
+ info("USBLCD closed.");
+ return 0;
+}
+
+static int
+ioctl_lcd(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+ int i;
+ char buf[30];
+
+ /* Sanity check to make sure lcd is connected, powered, etc */
+ if (lcd == NULL ||
+ lcd->present == 0 ||
+ lcd->lcd_dev == NULL)
+ return -1;
+
+ switch (cmd) {
+ case IOCTL_GET_HARD_VERSION:
+ i = (lcd->lcd_dev)->descriptor.bcdDevice;
+ sprintf(buf,"%1d%1d.%1d%1d",(i & 0xF000)>>12,(i & 0xF00)>>8,
+ (i & 0xF0)>>4,(i & 0xF));
+ if (copy_to_user((void *)arg,buf,strlen(buf))!=0)
+ return -EFAULT;
+ break;
+ case IOCTL_GET_DRV_VERSION:
+ sprintf(buf,DRIVER_VERSION);
+ if (copy_to_user((void *)arg,buf,strlen(buf))!=0)
+ return -EFAULT;
+ break;
+ default:
+ return -ENOIOCTLCMD;
+ break;
+ }
+
+ return 0;
+}
+
+static ssize_t
+write_lcd(struct file *file, const char *buffer,
+ size_t count, loff_t * ppos)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+
+ unsigned long copy_size;
+ unsigned long bytes_written = 0;
+ unsigned int partial;
+
+ int result = 0;
+ int maxretry;
+
+ /* Sanity check to make sure lcd is connected, powered, etc */
+ if (lcd == NULL ||
+ lcd->present == 0 ||
+ lcd->lcd_dev == NULL)
+ return -1;
+
+ do {
+ unsigned long thistime;
+ char *obuf = lcd->obuf;
+
+ thistime = copy_size =
+ (count >= OBUF_SIZE) ? OBUF_SIZE : count;
+ if (copy_from_user(lcd->obuf, buffer, copy_size))
+ return -EFAULT;
+ maxretry = 5;
+ while (thistime) {
+ if (!lcd->lcd_dev)
+ return -ENODEV;
+ if (signal_pending(current)) {
+ return bytes_written ? bytes_written : -EINTR;
+ }
+
+ result = usb_bulk_msg(lcd->lcd_dev,
+ usb_sndbulkpipe(lcd->lcd_dev, 1),
+ obuf, thistime, &partial, 10 * HZ);
+
+ dbg("write stats: result:%d thistime:%lu partial:%u",
+ result, thistime, partial);
+
+ if (result == USB_ST_TIMEOUT) { /* NAK - so hold for a while */
+ if (!maxretry--) {
+ return -ETIME;
+ }
+ interruptible_sleep_on_timeout(&lcd-> wait_q, NAK_TIMEOUT);
+ continue;
+ } else if (!result & partial) {
+ obuf += partial;
+ thistime -= partial;
+ } else
+ break;
+ };
+ if (result) {
+ err("Write Whoops - %x", result);
+ return -EIO;
+ }
+ bytes_written += copy_size;
+ count -= copy_size;
+ buffer += copy_size;
+ } while (count > 0);
+
+ return bytes_written ? bytes_written : -EIO;
+}
+
+static ssize_t
+read_lcd(struct file *file, char *buffer, size_t count, loff_t * ppos)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+ ssize_t read_count;
+ unsigned int partial;
+ int this_read;
+ int result;
+ int maxretry = 10;
+ char *ibuf = lcd->ibuf;
+
+ /* Sanity check to make sure lcd is connected, powered, etc */
+ if (lcd == NULL ||
+ lcd->present == 0 ||
+ lcd->lcd_dev == NULL)
+ return -1;
+
+ read_count = 0;
+
+ while (count > 0) {
+ if (signal_pending(current)) {
+ return read_count ? read_count : -EINTR;
+ }
+ if (!lcd->lcd_dev)
+ return -ENODEV;
+ this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
+
+ result = usb_bulk_msg(lcd->lcd_dev,
+ usb_rcvbulkpipe(lcd->lcd_dev, 0),
+ ibuf, this_read, &partial,
+ (int) (HZ * 8));
+
+ dbg(KERN_DEBUG "read stats: result:%d this_read:%u partial:%u",
+ result, this_read, partial);
+
+ if (partial) {
+ count = this_read = partial;
+ } else if (result == USB_ST_TIMEOUT || result == 15) { /* FIXME: 15 ??? */
+ if (!maxretry--) {
+ err("read_lcd: maxretry timeout");
+ return -ETIME;
+ }
+ interruptible_sleep_on_timeout(&lcd->wait_q,
+ NAK_TIMEOUT);
+ continue;
+ } else if (result != USB_ST_DATAUNDERRUN) {
+ err("Read Whoops - result:%u partial:%u this_read:%u",
+ result, partial, this_read);
+ return -EIO;
+ } else {
+ return (0);
+ }
+
+ if (this_read) {
+ if (copy_to_user(buffer, ibuf, this_read))
+ return -EFAULT;
+ count -= this_read;
+ read_count += this_read;
+ buffer += this_read;
+ }
+ }
+ return read_count;
+}
+
+static void *probe_lcd(struct usb_device *dev, unsigned int ifnum)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+ int i;
+
+ if (dev->descriptor.idProduct != 0x0001 ) {
+ warn(KERN_INFO "USBLCD model not supported.");
+ return NULL;
+ }
+
+ if (lcd->present == 1) {
+ warn(KERN_INFO "Multiple USBLCDs are not supported!");
+ return NULL;
+ }
+
+ i = dev->descriptor.bcdDevice;
+
+ info("USBLCD Version %1d%1d.%1d%1d found at address %d",
+ (i & 0xF000)>>12,(i & 0xF00)>>8,(i & 0xF0)>>4,(i & 0xF),
+ dev->devnum);
+
+ lcd->present = 1;
+ lcd->lcd_dev = dev;
+
+ if (!(lcd->obuf = (char *) kmalloc(OBUF_SIZE, GFP_KERNEL))) {
+ err("probe_lcd: Not enough memory for the output buffer");
+ return NULL;
+ }
+ dbg("probe_lcd: obuf address:%p", lcd->obuf);
+
+ if (!(lcd->ibuf = (char *) kmalloc(IBUF_SIZE, GFP_KERNEL))) {
+ err("probe_lcd: Not enough memory for the input buffer");
+ kfree(lcd->obuf);
+ return NULL;
+ }
+ dbg("probe_lcd: ibuf address:%p", lcd->ibuf);
+
+ return lcd;
+}
+
+static void disconnect_lcd(struct usb_device *dev, void *ptr)
+{
+ struct lcd_usb_data *lcd = (struct lcd_usb_data *) ptr;
+
+ if (lcd->isopen) {
+ lcd->isopen = 0;
+ /* better let it finish - the release will do whats needed */
+ lcd->lcd_dev = NULL;
+ return;
+ }
+ kfree(lcd->ibuf);
+ kfree(lcd->obuf);
+
+ info("USBLCD disconnected.");
+
+ lcd->present = 0;
+}
+
+static struct usb_device_id id_table [] = {
+ { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
+ {},
+};
+
+MODULE_DEVICE_TABLE (usb, id_table);
+
+static struct
+file_operations usb_lcd_fops = {
+ .owner = THIS_MODULE,
+ .read = read_lcd,
+ .write = write_lcd,
+ .ioctl = ioctl_lcd,
+ .open = open_lcd,
+ .release = close_lcd,
+};
+
+static struct
+usb_driver lcd_driver = {
+ .name = "usblcd",
+ .probe = (void *)probe_lcd,
+ .disconnect = disconnect_lcd,
+ .id_table = id_table,
+ .fops = &usb_lcd_fops,
+ .minor = USBLCD_MINOR,
+};
+
+int usb_lcd_init(void)
+{
+ if (usb_register(&lcd_driver) < 0)
+ return -1;
+
+ info("%s (C) Adams IT Services http://www.usblcd.de", DRIVER_VERSION);
+ info("USBLCD support registered.");
+ return 0;
+}
+
+
+void usb_lcd_cleanup(void)
+{
+ struct lcd_usb_data *lcd = &lcd_instance;
+
+ lcd->present = 0;
+ usb_deregister(&lcd_driver);
+}
+
+module_init(usb_lcd_init);
+module_exit(usb_lcd_cleanup);
+
+MODULE_AUTHOR("Adams IT Services <info@usblcd.de>");
+MODULE_DESCRIPTION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)