patch-2.4.22 linux-2.4.22/arch/arm/mm/proc-arm1026.S

Next file: linux-2.4.22/arch/arm/mm/proc-arm2,3.S
Previous file: linux-2.4.22/arch/arm/mm/proc-arm1020.S
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/arm/mm/proc-arm1026.S linux-2.4.22/arch/arm/mm/proc-arm1026.S
@@ -0,0 +1,660 @@
+/*
+ *  linux/arch/arm/mm/arm1026.S: MMU functions for ARM1026EJ-S
+ *
+ *  Copyright (C) 2002 ARM Limited
+ *  Copyright (C) 2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm1026.
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions.  Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE	16384
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE	32
+#define ICACHELINESIZE	32
+
+/*
+ * and the page size
+ */
+#define PAGESIZE	4096
+
+	.text
+
+/*
+ * cpu_arm1026_data_abort()
+ *
+ * obtain information about current aborted instruction
+ * Note: we read user space.  This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture.  Unfortunately, this does happen.  We live with it.
+ *
+ * Inputs:
+ *  r2 = address of abort 
+ *  r3 = cpsr of abort
+ *
+ * Returns:
+ *  r0 = address of abort
+ *  r1 != 0 if writing
+ *  r3 = FSR
+ *  r4 = corrupted
+ */
+	.align	5
+ENTRY(cpu_arm1026_data_abort)
+	mrc	p15, 0, r3, c5, c0, 0		@ get FSR
+	and	r2, r3, #0b1101			@ Check for translation error
+	sub	r1, r2, #0b0101
+
+	and	r3, r3, #255
+	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
+
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_check_bugs()
+ */
+ENTRY(cpu_arm1026_check_bugs)
+	mrs	ip, cpsr
+	bic	ip, ip, #F_BIT
+	msr	cpsr, ip
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_proc_init()
+ */
+ENTRY(cpu_arm1026_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_proc_fin()
+ */
+ENTRY(cpu_arm1026_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #F_BIT | I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	cpu_arm1026_cache_clean_invalidate_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000 		@ ...i............
+	bic	r0, r0, #0x000e 		@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_arm1026_reset(loc)
+ *
+ * Perform a soft reset of the system.	Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_arm1026_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f 		@ ............wcam
+	bic	ip, ip, #0x1100 		@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_arm1026_do_idle()
+ */
+	.align	5
+ENTRY(cpu_arm1026_do_idle)
+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
+	mov	pc, lr
+
+/* ================================= CACHE ================================ */
+
+
+/*
+ * cpu_arm1026_cache_clean_invalidate_all()
+ *
+ * clean and invalidate all cache lines
+ *
+ * Note:
+ *  1. we should preserve r0 at all times
+ */
+	.align	5
+ENTRY(cpu_arm1026_cache_clean_invalidate_all)
+	mov	r2, #1
+cpu_arm1026_cache_clean_invalidate_all_r2:
+	mov	ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+#else
+1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
+	bne	1b
+#endif
+	teq	r2, #0
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_cache_clean_invalidate_range(start, end, flags)
+ *
+ * clean and invalidate all cache lines associated with this area of memory
+ *
+ * This is a little misleading, it is not intended to clean out
+ * the i-cache but to make sure that any data written to the
+ * range is made consistant.  This means that when we execute code
+ * in that region, everything works as we expect.
+ *
+ * This generally means writing back data in the Dcache and
+ * write buffer and flushing the Icache over that region
+ * start: Area start address
+ * end:   Area end address
+ * flags: nonzero for I cache as well
+ */
+	.align	5
+ENTRY(cpu_arm1026_cache_clean_invalidate_range)
+	bic	r0, r0, #DCACHELINESIZE - 1	@ && added by PGM
+	sub	r3, r1, r0
+	cmp	r3, #MAX_AREA_SIZE
+	bhi	cpu_arm1026_cache_clean_invalidate_all_r2
+
+1:	teq	r2, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #DCACHELINESIZE
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #DCACHELINESIZE
+#else
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #DCACHELINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #DCACHELINESIZE
+#endif
+        
+	cmp	r0, r1
+	blo	1b
+
+	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
+
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_flush_ram_page(page)
+ *
+ * clean and invalidate all cache lines associated with this area of memory
+ *
+ * page: page to clean and invalidate
+ */
+	.align	5
+ENTRY(cpu_arm1026_flush_ram_page)
+	mov	r1, #PAGESIZE
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #DCACHELINESIZE
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #DCACHELINESIZE
+#else
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	add	r0, r0, #DCACHELINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	add	r0, r0, #DCACHELINESIZE
+#endif
+	subs	r1, r1, #2 * DCACHELINESIZE
+	bne	1b
+	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/* ================================ D-CACHE =============================== */
+
+/*
+ * cpu_arm1026_dcache_invalidate_range(start, end)
+ *
+ * throw away all D-cached data in specified region without an obligation
+ * to write them back.	Note however that we must clean the D-cached entries
+ * around the boundaries if the start and/or end address are not cache
+ * aligned.
+ *
+ * start: virtual start address
+ * end:   virtual end address
+ */
+	.align	5
+ENTRY(cpu_arm1026_dcache_invalidate_range)
+#ifndef CONFIG_CPU_ARM1026_WRITETHROUGH
+	tst	r0, #DCACHELINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #DCACHELINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+#endif
+	bic	r0, r0, #DCACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #DCACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_dcache_clean_range(start, end)
+ *
+ * For the specified virtual address range, ensure that all caches contain
+ * clean data, such that peripheral accesses to the physical RAM fetch
+ * correct data.
+ *
+ * start: virtual start address
+ * end:   virtual end address
+ */
+	.align	5
+ENTRY(cpu_arm1026_dcache_clean_range)
+#ifndef CONFIG_CPU_ARM1026_WRITETHROUGH
+	bic	r0, r0, #DCACHELINESIZE - 1
+	sub	r3, r1, r0
+	cmp	r3, #MAX_AREA_SIZE
+	mov	r2, #0
+	bhi	cpu_arm1026_cache_clean_invalidate_all_r2
+
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #DCACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, r2, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_dcache_clean_page(page)
+ *
+ * Cleans a single page of dcache so that if we have any future aliased
+ * mappings, they will be consistent at the time that they are created.
+ *
+ * page: virtual address of page to clean from dcache
+ *
+ * Note:
+ *  1. we don't need to flush the write buffer in this case.
+ *  2. we don't invalidate the entries since when we write the page
+ *     out to disk, the entries may get reloaded into the cache.
+ */
+	.align	5
+ENTRY(cpu_arm1026_dcache_clean_page)
+#ifndef CONFIG_CPU_ARM1026_WRITETHROUGH
+	mov	r1, #PAGESIZE
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #DCACHELINESIZE
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #DCACHELINESIZE
+	subs	r1, r1, #2 * DCACHELINESIZE
+	bne	1b
+#endif
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_dcache_clean_entry(addr)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+	.align	5
+ENTRY(cpu_arm1026_dcache_clean_entry)
+#ifndef CONFIG_CPU_ARM1026_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/* ================================ I-CACHE =============================== */
+
+/*
+ * cpu_arm1026_icache_invalidate_range(start, end)
+ *
+ * This *is not* just icache.  It is to make data written to memory
+ * consistent such that instructions fetched from the region are what
+ * we expect.
+ *
+ * This is typically used after we have copied a module into kernel space,
+ * and we're about to start executing code from that module.
+ *
+ * start: virtual start address
+ * end:   virtual end address
+ */
+	.align	5
+ENTRY(cpu_arm1026_icache_invalidate_range)
+	bic	r0, r0, #DCACHELINESIZE - 1	@ Safety check
+	sub	r3, r1, r0
+	cmp	r3, #MAX_AREA_SIZE
+	bhi	cpu_arm1026_cache_clean_invalidate_all_r2
+
+1:	mcr	p15, 0, r0, c7, c5, 1		@ clean I entries
+	add	r0, r0, #DCACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(cpu_arm1026_icache_invalidate_page)
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+
+
+/* ================================== TLB ================================= */
+
+/*
+ * cpu_arm1026_tlb_invalidate_all()
+ *
+ * Invalidate all TLB entries
+ */
+	.align	5
+ENTRY(cpu_arm1026_tlb_invalidate_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_tlb_invalidate_range(start, end)
+ *
+ * invalidate TLB entries covering the specified range
+ *
+ * start: range start address
+ * end:   range end address
+ */
+	.align	5
+ENTRY(cpu_arm1026_tlb_invalidate_range)
+	sub	r3, r1, r0
+	cmp	r3, #256 * PAGESIZE		@ arbitary, should be tuned
+	bhi	cpu_arm1026_tlb_invalidate_all
+
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+
+	bic	r0, r0, #(PAGESIZE - 1) & 0x00ff
+	bic	r0, r0, #(PAGESIZE - 1) & 0xff00
+
+1:	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	mcr	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
+	add	r0, r0, #PAGESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_tlb_invalidate_page(page, flags)
+ *
+ * invalidate the TLB entries for the specified page.
+ *
+ * page:  page to invalidate
+ * flags: non-zero if we include the I TLB
+ */
+	.align	5
+ENTRY(cpu_arm1026_tlb_invalidate_page)
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	teq	r1, #0
+	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	mcrne	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
+	mov	pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1026_set_pgd(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_arm1026_set_pgd)
+	mov	ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	/* Any reason why we don't use mcr p15, 0, r0, c7, c7, 0 here? --rmk */
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
+	bne	1b
+#endif
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_set_pmd(pmdp, pmd)
+ *
+ * Set a level 1 translation table entry, and clean it out of
+ * any caches such that the MMUs can load it correctly.
+ *
+ * pmdp: pointer to PMD entry
+ * pmd:  PMD value to store
+ */
+	.align	5
+ENTRY(cpu_arm1026_set_pmd)
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	eor	r2, r1, #0x0a			@ C & Section
+	tst	r2, #0x0b
+	biceq	r1, r1, #4			@ clear bufferable bit
+#endif
+	str	r1, [r0]
+#ifndef CONFIG_CPU_ARM1026_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_arm1026_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_arm1026_set_pte)
+	str	r1, [r0], #-1024		@ linux version
+
+	eor	r1, r1, #LPTE_PRESENT | LPTE_YOUNG | LPTE_WRITE | LPTE_DIRTY
+
+	bic	r2, r1, #0xff0
+	bic	r2, r2, #3
+	orr	r2, r2, #HPTE_TYPE_SMALL
+
+	tst	r1, #LPTE_USER | LPTE_EXEC	@ User or Exec?
+	orrne	r2, r2, #HPTE_AP_READ
+
+	tst	r1, #LPTE_WRITE | LPTE_DIRTY	@ Write and Dirty?
+	orreq	r2, r2, #HPTE_AP_WRITE
+
+	tst	r1, #LPTE_PRESENT | LPTE_YOUNG	@ Present and Young?
+	movne	r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	eor	r3, r2, #0x0a			@ C & small page?
+	tst	r3, #0x0b
+	biceq	r2, r2, #4
+#endif
+	str	r2, [r0]			@ hardware version
+	mov	r0, r0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+
+ENTRY(cpu_arm1026_name)
+	.ascii	"ARM1026EJ-S"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	.ascii	"i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	.ascii	"d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	.ascii	"(wt)"
+#else
+	.ascii	"(wb)"
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+	.ascii	"B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+	.ascii	"RR"
+#endif
+#endif
+	.ascii	"\0"
+	.align
+
+	.section ".text.init", #alloc, #execinstr
+
+__arm1026_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
+	mcr	p15, 0, r4, c2, c0		@ load page table pointer
+
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mov	r0, #4				@ disable write-back on caches explicitly
+	mcr	p15, 7, r0, c15, c0, 0
+#endif 
+
+	mov	r0, #0x1f			@ Domains 0, 1 = client
+	mcr	p15, 0, r0, c3, c0		@ load domain access register
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+/*
+ * Clear out 'unwanted' bits (then put them in if we need them)
+ */
+						@   VI ZFRS BLDP WCAM
+	bic	r0, r0, #0x0e00
+	bic	r0, r0, #0x0002
+	bic	r0, r0, #0x000c
+	bic	r0, r0, #0x1000 		@ ...0 000. .... 000.
+/*
+ * Turn on what we want
+ */
+	orr	r0, r0, #0x0031
+	orr	r0, r0, #0x2100 		@ ..1. ...1 ..11 ...1
+
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+	orr	r0, r0, #0x4000 		@ .1.. .... .... ....
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+	orr	r0, r0, #0x0800 		@ ....Z...........
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	orr	r0, r0, #0x0004 		@ .... .... .... .1..
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	orr	r0, r0, #0x1000 		@ ...1 .... .... ....
+#endif
+	mov	pc, lr
+
+	.text
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	arm1026_processor_functions, #object
+arm1026_processor_functions:
+	.word	cpu_arm1026_data_abort
+	.word	cpu_arm1026_check_bugs
+	.word	cpu_arm1026_proc_init
+	.word	cpu_arm1026_proc_fin
+	.word	cpu_arm1026_reset
+	.word	cpu_arm1026_do_idle
+
+	/* cache */
+	.word	cpu_arm1026_cache_clean_invalidate_all
+	.word	cpu_arm1026_cache_clean_invalidate_range
+	.word	cpu_arm1026_flush_ram_page
+
+	/* dcache */
+	.word	cpu_arm1026_dcache_invalidate_range
+	.word	cpu_arm1026_dcache_clean_range
+	.word	cpu_arm1026_dcache_clean_page
+	.word	cpu_arm1026_dcache_clean_entry
+
+	/* icache */
+	.word	cpu_arm1026_icache_invalidate_range
+	.word	cpu_arm1026_icache_invalidate_page
+
+	/* tlb */
+	.word	cpu_arm1026_tlb_invalidate_all
+	.word	cpu_arm1026_tlb_invalidate_range
+	.word	cpu_arm1026_tlb_invalidate_page
+
+	/* pgtable */
+	.word	cpu_arm1026_set_pgd
+	.word	cpu_arm1026_set_pmd
+	.word	cpu_arm1026_set_pte
+	.size	arm1026_processor_functions, . - arm1026_processor_functions
+
+	.type	cpu_arm1026_info, #object
+cpu_arm1026_info:
+	.long	0
+	.long	cpu_arm1026_name
+	.size	cpu_arm1026_info, . - cpu_arm1026_info
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5EJ"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5EJ"
+	.size	cpu_elf_name, . - cpu_elf_name
+	.align
+
+	.section ".proc.info", #alloc, #execinstr
+
+	.type	__arm1026_proc_info,#object
+__arm1026_proc_info:
+	.long	0x4100a260
+	.long	0xff00fff0
+	.long	0x00000c1e			@ mmuflags
+	b	__arm1026_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | \
+		HWCAP_FAST_MULT
+	.long	cpu_arm1026_info
+	.long	arm1026_processor_functions
+	.size	__arm1026_proc_info, . - __arm1026_proc_info
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)