patch-2.4.22 linux-2.4.22/arch/mips/au1000/common/clocks.c

• Lines: 72
• Date: 2003-08-25 04:44:39.000000000 -0700
• Orig file: linux-2.4.21/arch/mips/au1000/common/clocks.c
• Orig date: 2002-11-28 15:53:09.000000000 -0800

diff -urN linux-2.4.21/arch/mips/au1000/common/clocks.c linux-2.4.22/arch/mips/au1000/common/clocks.c
@@ -30,21 +30,21 @@
 #include <linux/module.h>
 #include <asm/au1000.h>
 
-static unsigned int au1000_clock; // Hz
+static unsigned int au1x00_clock; // Hz
 static unsigned int lcd_clock;    // KHz
 static unsigned long uart_baud_base;
 
 /*
  * Set the au1000_clock
  */
-void set_au1000_speed(unsigned int new_freq)
+void set_au1x00_speed(unsigned int new_freq)
 {
-	au1000_clock = new_freq;
+	au1x00_clock = new_freq;
 }
 
-unsigned int get_au1000_speed(void)
+unsigned int get_au1x00_speed(void)
 {
-	return au1000_clock;
+	return au1x00_clock;
 }
 
 
@@ -54,27 +54,27 @@
  * we want to be able to use the same code on different
  * speed CPUs.
  */
-unsigned long get_au1000_uart_baud_base(void)
+unsigned long get_au1x00_uart_baud_base(void)
 {
 	return uart_baud_base;
 }
 
-void set_au1000_uart_baud_base(unsigned long new_baud_base)
+void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 {
 	uart_baud_base = new_baud_base;
 }
 
 /*
- * Calculate the Au1000's LCD clock based on the current
+ * Calculate the Au1x00's LCD clock based on the current
  * cpu clock and the system bus clock, and try to keep it
  * below 40 MHz (the Pb1000 board can lock-up if the LCD
  * clock is over 40 MHz).
  */
-void set_au1000_lcd_clock(void)
+void set_au1x00_lcd_clock(void)
 {
 	unsigned int static_cfg0;
 	unsigned int sys_busclk =
-		(get_au1000_speed()/1000) /
+		(get_au1x00_speed()/1000) /
 		((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
 
 	static_cfg0 = au_readl(MEM_STCFG0);
@@ -90,9 +90,9 @@
 			       lcd_clock);
 }
 
-unsigned int get_au1000_lcd_clock(void)
+unsigned int get_au1x00_lcd_clock(void)
 {
 	return lcd_clock;
 }
 
-EXPORT_SYMBOL(get_au1000_lcd_clock);
+EXPORT_SYMBOL(get_au1x00_lcd_clock);