patch-2.4.22 linux-2.4.22/arch/mips/au1000/xxs1500/irqmap.c
Next file: linux-2.4.22/arch/mips/baget/Makefile
Previous file: linux-2.4.22/arch/mips/au1000/xxs1500/init.c
Back to the patch index
Back to the overall index
- Lines: 107
- Date:
2003-08-25 04:44:39.000000000 -0700
- Orig file:
linux-2.4.21/arch/mips/au1000/xxs1500/irqmap.c
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.21/arch/mips/au1000/xxs1500/irqmap.c linux-2.4.22/arch/mips/au1000/xxs1500/irqmap.c
@@ -0,0 +1,106 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1xxx irq map table
+ *
+ * Copyright 2003 Embedded Edge, LLC
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/au1000.h>
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+
+ { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+
+ { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
+
+ { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
+ { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
+
+ { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+
+ /* Careful if you change match 2 request!
+ * The interrupt handler is called directly
+ * from the low level dispatch code.
+ */
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)