patch-2.4.22 linux-2.4.22/arch/mips/gt64120/common/time.c

Next file: linux-2.4.22/arch/mips/gt64120/ev64120/Makefile
Previous file: linux-2.4.22/arch/mips/gt64120/common/pci.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/gt64120/common/time.c linux-2.4.22/arch/mips/gt64120/common/time.c
@@ -0,0 +1,98 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Galileo Technology chip interrupt handler
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/ptrace.h>
+#include <asm/gt64120/gt64120.h>
+
+/*
+ * These are interrupt handlers for the GT on-chip interrupts.  They all come
+ * in to the MIPS on a single interrupt line, and have to be handled and ack'ed
+ * differently than other MIPS interrupts.
+ */
+
+static void gt64120_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned int irq_src, int_high_src, irq_src_mask, int_high_src_mask;
+	int handled = 0;
+
+	irq_src = GT_READ(GT_INTRCAUSE_OFS);
+	irq_src_mask = GT_READ(GT_INTRMASK_OFS);
+	int_high_src = GT_READ(GT_HINTRCAUSE_OFS);
+	int_high_src_mask = GT_READ(GT_HINTRMASK_OFS);
+	irq_src = irq_src & irq_src_mask;
+	int_high_src = int_high_src & int_high_src_mask;
+
+	if (irq_src & 0x00000800) {	/* Check for timer interrupt */
+		handled = 1;
+		irq_src &= ~0x00000800;
+		do_timer(regs);
+	}
+
+	GT_WRITE(GT_INTRCAUSE_OFS, 0);
+	GT_WRITE(GT_HINTRCAUSE_OFS, 0);
+}
+
+/*
+ * Initializes timer using galileo's built in timer.
+ */
+#ifdef CONFIG_SYSCLK_100
+#define Sys_clock (100 * 1000000)	// 100 MHz
+#endif
+#ifdef CONFIG_SYSCLK_83
+#define Sys_clock (83.333 * 1000000)	// 83.333 MHz
+#endif
+#ifdef CONFIG_SYSCLK_75
+#define Sys_clock (75 * 1000000)	// 75 MHz
+#endif
+
+/*
+ * This will ignore the standard MIPS timer interrupt handler that is passed in
+ * as *irq (=irq0 in ../kernel/time.c).  We will do our own timer interrupt
+ * handling.
+ */
+void gt64120_time_init(void)
+{
+	extern irq_desc_t irq_desc[NR_IRQS];
+	static struct irqaction timer;
+
+	/* Disable timer first */
+	GT_WRITE(GT_TC_CONTROL_OFS, 0);
+	/* Load timer value for 100 Hz */
+	GT_WRITE(GT_TC3_OFS, Sys_clock / 100);
+
+	/*
+	 * Create the IRQ structure entry for the timer.  Since we're too early
+	 * in the boot process to use the "request_irq()" call, we'll hard-code
+	 * the values to the correct interrupt line.
+	 */
+	timer.handler = gt64120_irq;
+	timer.flags = SA_SHIRQ | SA_INTERRUPT;
+	timer.name = "timer";
+	timer.dev_id = NULL;
+	timer.next = NULL;
+	timer.mask = 0;
+	irq_desc[GT_TIMER].action = &timer;
+
+	enable_irq(GT_TIMER);
+
+	/* Enable timer ints */
+	GT_WRITE(GT_TC_CONTROL_OFS, 0xc0);
+	/* clear Cause register first */
+	GT_WRITE(GT_INTRCAUSE_OFS, 0x0);
+	/* Unmask timer int */
+	GT_WRITE(GT_INTRMASK_OFS, 0x800);
+	/* Clear High int register */
+	GT_WRITE(GT_HINTRCAUSE_OFS, 0x0);
+	/* Mask All interrupts at High cause interrupt */
+	GT_WRITE(GT_HINTRMASK_OFS, 0x0);
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)