patch-2.4.22 linux-2.4.22/arch/ppc/kernel/ppc4xx_setup.c

Next file: linux-2.4.22/arch/ppc/kernel/ppc8xx_pic.c
Previous file: linux-2.4.22/arch/ppc/kernel/ppc4xx_pic.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/ppc/kernel/ppc4xx_setup.c linux-2.4.22/arch/ppc/kernel/ppc4xx_setup.c
@@ -0,0 +1,431 @@
+/*
+ *
+ *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ *    Copyright 2000-2002 MontaVista Software Inc.
+ *      Completed implementation.
+ *      Author: MontaVista Software, Inc.  <source@mvista.com>
+ *              Frank Rowand <frank_rowand@mvista.com>
+ *              Debbie Chu   <debbie_chu@mvista.com>
+ *
+ *    Module name: ppc4xx_setup.c
+ *
+ *    Description:
+ *      Architecture- / platform-specific boot-time initialization code for
+ *      IBM PowerPC 4xx based boards. Adapted from original
+ *      code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ *      <dan@net4x.com>.
+ *
+ * 	History: 11/09/2001 - armin
+ *	rename board_setup_nvram_access to board_init. board_init is
+ *	used for all other board specific instructions needed during
+ *	platform_init.
+ *	moved RTC to board.c files
+ *	moved VT/FB to board.c files
+ *	moved r/w4 ide to redwood.c
+ *
+ *	History: 04/18/02 - Armin
+ *	added ash to setting CETE bit in calibrate()
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blk.h>
+#include <linux/pci.h>
+#include <linux/rtc.h>
+#include <linux/console.h>
+#include <linux/ide.h>
+#include <linux/serial_reg.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/kgdb.h>
+#include <asm/ibm4xx.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/pci-bridge.h>
+#include <asm/bootinfo.h>
+
+/* Function Prototypes */
+static void ppc4xx_gdb_init(void);
+
+extern void abort(void);
+extern void ppc4xx_find_bridges(void);
+
+extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int pckbd_getkeycode(unsigned int scancode);
+extern int pckbd_pretranslate(unsigned char scancode, char raw_mode);
+extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
+			   char raw_mode);
+extern char pckbd_unexpected_up(unsigned char keycode);
+extern void pckbd_leds(unsigned char leds);
+extern void pckbd_init_hw(void);
+
+extern int nonpci_ide_default_irq(ide_ioreg_t base);
+extern void nonpci_ide_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
+				       ide_ioreg_t ctrl_port, int *irq);
+
+extern void ppc4xx_wdt_heartbeat(void);
+extern int wdt_enable;
+extern unsigned long wdt_period;
+//extern void early_uart_init(void);
+
+/* Board specific functions */
+extern void board_setup_arch(void);
+extern void board_io_mapping(void);
+extern void board_setup_irq(void);
+extern void board_init(void);
+
+/* Global Variables */
+unsigned char __res[sizeof (bd_t)];
+
+#if defined(EMAC_NUMS) && EMAC_NUMS > 0
+u32 emac_phy_map[EMAC_NUMS];
+EXPORT_SYMBOL(emac_phy_map);
+#endif
+
+static void __init
+ppc4xx_setup_arch(void)
+{
+
+	/* Setup PCI host bridges */
+
+#ifdef CONFIG_PCI
+	ppc4xx_find_bridges();
+#endif
+
+#if defined(CONFIG_FB)
+	conswitchp = &dummy_con;
+#endif
+#if defined (CONFIG_SERIAL) && !defined (CONFIG_RAINIER)
+//	early_uart_init();
+#endif
+	board_setup_arch();
+
+	ppc4xx_gdb_init();
+}
+
+/*
+ *   This routine pretty-prints the platform's internal CPU clock
+ *   frequencies into the buffer for usage in /proc/cpuinfo.
+ */
+
+static int
+ppc4xx_show_percpuinfo(struct seq_file *m, int i)
+{
+	bd_t *bip = (bd_t *) __res;
+
+	seq_printf(m, "clock\t\t: %ldMHz\n", (long) bip->bi_intfreq / 1000000);
+
+	return 0;
+}
+
+/*
+ *   This routine pretty-prints the platform's internal bus clock
+ *   frequencies into the buffer for usage in /proc/cpuinfo.
+ */
+static int
+ppc4xx_show_cpuinfo(struct seq_file *m)
+{
+	bd_t *bip = (bd_t *) __res;
+
+	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
+	seq_printf(m, "plb bus clock\t: %ldMHz\n",
+		   (long) bip->bi_busfreq / 1000000);
+#ifdef CONFIG_PCI
+	seq_printf(m, "pci bus clock\t: %dMHz\n",
+		   bip->bi_pci_busfreq / 1000000);
+#endif
+
+	return 0;
+}
+
+/*
+ * Return the virtual address representing the top of physical RAM.
+ */
+static unsigned long __init
+ppc4xx_find_end_of_memory(void)
+{
+	bd_t *bip = (bd_t *) __res;
+
+	return ((unsigned long) bip->bi_memsize);
+}
+
+static void __init
+m4xx_map_io(void)
+{
+	io_block_mapping(PPC4xx_ONB_IO_VADDR,
+			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
+#ifdef CONFIG_PCI
+	io_block_mapping(PPC4xx_PCI_IO_VADDR,
+			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
+	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
+			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
+	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
+			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
+#endif
+	board_io_mapping();
+}
+
+static void __init
+ppc4xx_init_IRQ(void)
+{
+	int i;
+
+	ppc4xx_pic_init();
+
+	for (i = 0; i < NR_IRQS; i++)
+		irq_desc[i].handler = ppc4xx_pic;
+
+	/* give board specific code a chance to setup things */
+	board_setup_irq();
+	return;
+}
+
+static void
+ppc4xx_restart(char *cmd)
+{
+	printk("%s\n", cmd);
+	abort();
+}
+
+static void
+ppc4xx_halt(void)
+{
+	printk("System Halted\n");
+	__cli();
+	while (1) ;
+}
+
+static void __init
+ppc4xx_gdb_init(void)
+{
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+	mtspr(SPRN_DBCR1, 0);
+#endif
+}
+
+/*
+ * This routine retrieves the internal processor frequency from the board
+ * information structure, sets up the kernel timer decrementer based on
+ * that value, enables the 4xx programmable interval timer (PIT) and sets
+ * it up for auto-reload.
+ */
+static void __init
+ppc4xx_calibrate_decr(void)
+{
+	unsigned int freq;
+	bd_t *bip = (bd_t *) __res;
+
+#if defined(CONFIG_WALNUT) || defined(CONFIG_CEDER) 	\
+	|| defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
+	/* Openbios sets cpu  timers to CPU clk
+	 * we want to use the external clk
+	 * DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
+
+	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
+#endif
+
+	freq = bip->bi_tbfreq;
+//	tb_ticks_per_jiffy = freq / HZ;
+//	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+	tb_ticks_per_jiffy = (freq + HZ/2) / HZ;
+	tb_to_us = mulhwu_scale_factor(tb_ticks_per_jiffy*HZ, 1000000U);
+
+	/* Set the time base to zero.
+	   ** At 200 Mhz, time base will rollover in ~2925 years.
+	 */
+
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	/* Clear any pending timer interrupts */
+
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
+	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
+
+	/* Set the PIT reload value and just let it run. */
+	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
+}
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+
+/* We assume that the UART has already been initialized by the
+   firmware or the boot loader */
+static void
+serial_putc(u8 * com_port, unsigned char c)
+{
+	while ((readb(com_port + (UART_LSR)) & UART_LSR_THRE) == 0) ;
+	writeb(c, com_port);
+}
+
+static void
+ppc4xx_progress(char *s, unsigned short hex)
+{
+	char c;
+#ifdef SERIAL_DEBUG_IO_BASE
+	u8 *com_port = (u8 *) SERIAL_DEBUG_IO_BASE;
+
+	while ((c = *s++) != '\0') {
+		serial_putc(com_port, c);
+	}
+	serial_putc(com_port, '\r');
+	serial_putc(com_port, '\n');
+#else
+	printk("%s\r\n", s);
+#endif
+}
+#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
+
+/*
+ * IDE stuff.
+ * should be generic for every IDE PCI chipset
+ */
+#if defined(CONFIG_BLK_DEV_IDEPCI)
+static void
+ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
+			   ide_ioreg_t ctrl_port, int *irq)
+{
+	int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
+		hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
+
+	hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+}
+#endif
+
+TODC_ALLOC();
+
+/*
+ * Input(s):
+ *   r3 - Optional pointer to a board information structure.
+ *   r4 - Optional pointer to the physical starting address of the init RAM
+ *        disk.
+ *   r5 - Optional pointer to the physical ending address of the init RAM
+ *        disk.
+ *   r6 - Optional pointer to the physical starting address of any kernel
+ *        command-line parameters.
+ *   r7 - Optional pointer to the physical ending address of any kernel
+ *        command-line parameters.
+ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3) {
+		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+		       sizeof (bd_t));
+
+	}
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/*
+	 * If the init RAM disk has been configured in, and there's a valid
+	 * starting address for it, set it up.
+	 */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif				/* CONFIG_BLK_DEV_INITRD */
+
+	/* Copy the kernel command line arguments to a safe place. */
+
+	if (r6) {
+		*(char *) (r7 + KERNELBASE) = 0;
+		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+	}
+#if defined(CONFIG_PPC405_WDT)
+	ppc_md.heartbeat = ppc4xx_wdt_heartbeat;
+
+/* Look for wdt= option on command line */
+	if (strstr(cmd_line, "wdt=")) {
+		int valid_wdt = 0;
+		char *p, *q;
+		for (q = cmd_line; (p = strstr(q, "wdt=")) != 0;) {
+			q = p + 4;
+			if (p > cmd_line && p[-1] != ' ')
+				continue;
+			wdt_period = simple_strtoul(q, &q, 0);
+			valid_wdt = 1;
+			++q;
+		}
+		wdt_enable = valid_wdt;
+	}
+#endif
+
+	/* Initialize machine-dependency vectors */
+
+	ppc_md.setup_arch = ppc4xx_setup_arch;
+	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
+	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
+	ppc_md.init_IRQ = ppc4xx_init_IRQ;
+
+	ppc_md.restart = ppc4xx_restart;
+	ppc_md.power_off = ppc4xx_halt;
+	ppc_md.halt = ppc4xx_halt;
+
+	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
+
+	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
+	ppc_md.setup_io_mappings = m4xx_map_io;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = ppc4xx_progress;
+#endif
+#ifdef CONFIG_KGDB
+//	ppc_md.early_serial_map = early_uart_init;
+#endif
+#if defined(CONFIG_VT) && defined(CONFIG_PC_KEYBOARD)
+#if defined(CONFIG_REDWOOD_4) && defined(CONFIG_STB_KB)
+	redwood_irkb_init();
+#else
+	ppc_md.kbd_setkeycode = pckbd_setkeycode;
+	ppc_md.kbd_getkeycode = pckbd_getkeycode;
+	ppc_md.kbd_translate = pckbd_translate;
+	ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
+	ppc_md.kbd_leds = pckbd_leds;
+	ppc_md.kbd_init_hw = pckbd_init_hw;
+#endif
+#endif
+
+/*
+**   m8xx_setup.c, prep_setup.c use
+**     defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+*/
+#if defined (CONFIG_IDE)
+#if defined(CONFIG_BLK_DEV_IDEPCI)
+	ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
+#elif defined (CONFIG_DMA_NONPCI)	/* ON board IDE */
+	ppc_ide_md.default_irq = nonpci_ide_default_irq;
+	ppc_ide_md.ide_init_hwif = nonpci_ide_init_hwif_ports;
+#endif
+#endif
+	board_init();
+
+	return;
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)