patch-2.4.22 linux-2.4.22/arch/ppc/platforms/pplus_setup.c

Next file: linux-2.4.22/arch/ppc/platforms/prep_pci.c
Previous file: linux-2.4.22/arch/ppc/platforms/pplus_pci.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/ppc/platforms/pplus_setup.c linux-2.4.22/arch/ppc/platforms/pplus_setup.c
@@ -0,0 +1,550 @@
+/*
+ * arch/ppc/platforms/pplus_setup.c
+ *
+ * Board setup routines for MCG PowerPlus
+ *
+ * Author: Randy Vinson <rvinson@mvista.com>
+ *
+ * Derived from original PowerPlus PReP work by
+ * Cort Dougan, Johnnie Peters, Matt Porter, and
+ * Troy Benjegerdes.
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/blk.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/timex.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/ide.h>
+#include <linux/kdev_t.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#include <asm/sections.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/cache.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/mk48t59.h>
+#include <asm/prep_nvram.h>
+#include <asm/raven.h>
+#include <asm/keyboard.h>
+#include <asm/vga.h>
+#include <asm/time.h>
+
+#include <asm/i8259.h>
+#include <asm/open_pic.h>
+#include <asm/pplus.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/serial.h>
+
+#undef DUMP_DBATS
+
+TODC_ALLOC();
+
+extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int pckbd_getkeycode(unsigned int scancode);
+extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
+		char raw_mode);
+extern char pckbd_unexpected_up(unsigned char keycode);
+extern void pckbd_leds(unsigned char leds);
+extern void pckbd_init_hw(void);
+extern unsigned char pckbd_sysrq_xlate[128];
+
+extern char saved_command_line[];
+
+extern void pplus_setup_hose(void);
+extern void pplus_set_VIA_IDE_native(void);
+
+extern unsigned long loops_per_jiffy;
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_init(int, struct serial_struct *);
+
+static int
+pplus_show_cpuinfo(struct seq_file *m)
+{
+	extern char *Motherboard_map_name;
+
+	seq_printf(m, "vendor\t\t: Motorola MCG\n");
+	seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
+
+	return 0;
+}
+
+static void __init
+pplus_setup_arch(void)
+{
+	unsigned char reg;
+
+	if ( ppc_md.progress )
+		ppc_md.progress("pplus_setup_arch: enter", 0);
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	if ( ppc_md.progress )
+		ppc_md.progress("pplus_setup_arch: find_bridges", 0);
+
+	/* Setup PCI host bridge */
+	pplus_setup_hose();
+
+	/* Set up floppy in PS/2 mode */
+	outb(0x09, SIO_CONFIG_RA);
+	reg = inb(SIO_CONFIG_RD);
+	reg = (reg & 0x3F) | 0x40;
+	outb(reg, SIO_CONFIG_RD);
+	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
+
+	/* Enable L2.  Assume we don't need to flush -- Cort*/
+	*(unsigned char *)(0x8000081c) |= 3;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); /* /dev/ram */
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = to_kdev_t(0x00ff); /* /dev/nfs */
+#else
+		ROOT_DEV = to_kdev_t(0x0802); /* /dev/sda2 */
+#endif
+
+	printk(KERN_INFO "Motorola PowerPlus Platform\n");
+	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+
+	if ( ppc_md.progress )
+		ppc_md.progress("pplus_setup_arch: raven_init", 0);
+
+	raven_init();
+
+#ifdef CONFIG_VGA_CONSOLE
+	/* remap the VGA memory */
+	vgacon_remap_base = 0xf0000000;
+	conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#ifdef CONFIG_PPCBUG_NVRAM
+	/* Read in NVRAM data */
+	init_prep_nvram();
+
+	/* if no bootargs, look in NVRAM */
+	if ( cmd_line[0] == '\0' ) {
+		char *bootargs;
+		 bootargs = prep_nvram_get_var("bootargs");
+		 if (bootargs != NULL) {
+			 strcpy(cmd_line, bootargs);
+			 /* again.. */
+			 strcpy(saved_command_line, cmd_line);
+		}
+	}
+#endif
+	if ( ppc_md.progress )
+		ppc_md.progress("pplus_setup_arch: exit", 0);
+}
+
+static void
+pplus_restart(char *cmd)
+{
+	unsigned long i = 10000;
+
+	__cli();
+
+	/* set VIA IDE controller into native mode */
+	pplus_set_VIA_IDE_native();
+
+	/* set exception prefix high - to the prom */
+	_nmask_and_or_msr(0, MSR_IP);
+
+	/* make sure bit 0 (reset) is a 0 */
+	outb( inb(0x92) & ~1L , 0x92 );
+	/* signal a reset to system control port A - soft reset */
+	outb( inb(0x92) | 1 , 0x92 );
+
+	while ( i != 0 ) i++;
+	panic("restart failed\n");
+}
+
+static void
+pplus_halt(void)
+{
+	unsigned long flags;
+	__cli();
+	/* set exception prefix high - to the prom */
+	save_flags( flags );
+	restore_flags( flags|MSR_IP );
+
+	/* make sure bit 0 (reset) is a 0 */
+	outb( inb(0x92) & ~1L , 0x92 );
+	/* signal a reset to system control port A - soft reset */
+	outb( inb(0x92) | 1 , 0x92 );
+
+	while ( 1 ) ;
+	/*
+	 * Not reached
+	 */
+}
+
+static void
+pplus_power_off(void)
+{
+	pplus_halt();
+}
+
+static unsigned int
+pplus_irq_cannonicalize(u_int irq)
+{
+	if (irq == 2)
+	{
+		return 9;
+	}
+	else
+	{
+		return irq;
+	}
+}
+
+static void __init
+pplus_init_IRQ(void)
+{
+	int i;
+
+	if (OpenPIC_Addr != NULL) {
+		openpic_set_sources(0, 16, OpenPIC_Addr+0x10000);
+		openpic_init(NUM_8259_INTERRUPTS);
+		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+					i8259_irq);
+	}
+
+	for ( i = 0 ; i < NUM_8259_INTERRUPTS ; i++ )
+		irq_desc[i].handler = &i8259_pic;
+	i8259_init(0);
+}
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+/*
+ * IDE stuff.
+ */
+static int
+pplus_ide_default_irq(ide_ioreg_t base)
+{
+	switch (base) {
+		case 0x1f0: return 14;
+		case 0x170: return 15;
+		default: return 0;
+	}
+}
+
+static ide_ioreg_t
+pplus_ide_default_io_base(int index)
+{
+	switch (index) {
+		case 0: return 0x1f0;
+		case 1: return 0x170;
+		default:
+			return 0;
+	}
+}
+
+static void __init
+pplus_ide_init_hwif_ports (hw_regs_t *hw, ide_ioreg_t data_port, ide_ioreg_t ctrl_port, int *irq)
+{
+	ide_ioreg_t reg = data_port;
+	int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+		hw->io_ports[i] = reg;
+		reg += 1;
+	}
+	if (ctrl_port) {
+		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+	} else {
+		hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
+	}
+	if (irq != NULL)
+		*irq = pplus_ide_default_irq(data_port);
+}
+#endif
+
+#ifdef CONFIG_SMP
+/* PowerPlus (MTX) support */
+static int __init
+smp_pplus_probe(void)
+{
+	extern int mot_multi;
+
+	if (mot_multi) {
+		openpic_request_IPIs();
+		smp_hw_index[1] = 1;
+		return 2;
+	}
+
+	return 1;
+}
+
+static void __init
+smp_pplus_kick_cpu(int nr)
+{
+	*(unsigned long *)KERNELBASE = nr;
+	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+	printk("CPU1 reset, waiting\n");
+}
+
+static void __init
+smp_pplus_setup_cpu(int cpu_nr)
+{
+	if (OpenPIC_Addr)
+		do_openpic_setup_cpu();
+}
+
+static struct smp_ops_t pplus_smp_ops = {
+	smp_openpic_message_pass,
+	smp_pplus_probe,
+	smp_pplus_kick_cpu,
+	smp_pplus_setup_cpu,
+};
+#endif /* CONFIG_SMP */
+
+#ifdef DUMP_DBATS
+static void print_dbat(int idx, u32 bat) {
+
+	char str[64];
+
+	sprintf(str, "DBAT%c%c = 0x%08x\n",
+		(char)((idx - DBAT0U) / 2) + '0',
+		(idx & 1) ? 'L' : 'U', bat);
+	ppc_md.progress(str, 0);
+}
+
+#define DUMP_DBAT(x) \
+	do { \
+	u32 __temp = mfspr(x);\
+	print_dbat(x, __temp); \
+	} while (0)
+
+static void dump_dbats(void) {
+
+	if (ppc_md.progress) {
+		DUMP_DBAT(DBAT0U);
+		DUMP_DBAT(DBAT0L);
+		DUMP_DBAT(DBAT1U);
+		DUMP_DBAT(DBAT1L);
+		DUMP_DBAT(DBAT2U);
+		DUMP_DBAT(DBAT2L);
+		DUMP_DBAT(DBAT3U);
+		DUMP_DBAT(DBAT3L);
+	}
+}
+#endif
+
+static unsigned long __init
+pplus_find_end_of_memory(void)
+{
+	unsigned long total;
+
+	if (ppc_md.progress)
+		ppc_md.progress("pplus_find_end_of_memory",0);
+
+#ifdef DUMP_DBATS
+	dump_dbats();
+#endif
+
+	total = pplus_get_mem_size(0xfef80000);
+	return (total);
+}
+
+static void __init
+pplus_map_io(void)
+{
+	io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO);
+	io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
+}
+
+static void __init
+pplus_init2(void)
+{
+#ifdef CONFIG_NVRAM
+	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
+#endif
+	request_region(0x20,0x20,"pic1");
+	request_region(0xa0,0x20,"pic2");
+	request_region(0x00,0x20,"dma1");
+	request_region(0x40,0x20,"timer");
+	request_region(0x80,0x10,"dma page reg");
+	request_region(0xc0,0x20,"dma2");
+}
+
+/*
+ * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
+ * to 0xf0000000 to access Falcon/Raven or Hawk registers
+ */
+static __inline__ void
+pplus_set_bat(void)
+{
+	static int      mapping_set = 0;
+
+	if (!mapping_set) {
+
+		/* wait for all outstanding memory accesses to complete */
+		mb();
+
+		/* setup DBATs */
+		mtspr(DBAT2U, 0x80001ffe);
+		mtspr(DBAT2L, 0x8000002a);
+		mtspr(DBAT3U, 0xf0001ffe);
+		mtspr(DBAT3L, 0xf000002a);
+
+		/* wait for updates */
+		mb();
+
+		mapping_set = 1;
+	}
+
+	return;
+}
+
+#if defined(CONFIG_SERIAL) && \
+	(defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB))
+extern struct serial_state rs_table[];
+
+static void __init
+pplus_early_serial_map(void)
+{
+	struct serial_struct serial_req;
+
+	/* Setup serial port access */
+	memset(&serial_req, 0, sizeof(serial_req));
+
+	/*
+	 * rs_table[] already set up by <asm/pc_serial.h> so use that info for
+	 * gen550_init().  This also means early_serial_setup() doesn't
+	 * have to be called.
+	 */
+	serial_req.port = rs_table[0].port;
+	serial_req.io_type = rs_table[0].io_type;
+	serial_req.iomem_reg_shift = rs_table[0].iomem_reg_shift;
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	gen550_init(0, &serial_req);
+#endif
+
+	serial_req.port = rs_table[1].port;
+	serial_req.io_type = rs_table[1].io_type;
+	serial_req.iomem_reg_shift = rs_table[1].iomem_reg_shift;
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	gen550_init(1, &serial_req);
+#endif
+}
+#endif
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/* Map in board regs, etc. */
+	pplus_set_bat();
+
+	isa_io_base = PREP_ISA_IO_BASE;
+	isa_mem_base = PREP_ISA_MEM_BASE;
+	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
+	ISA_DMA_THRESHOLD = 0x00ffffff;
+	DMA_MODE_READ = 0x44;
+	DMA_MODE_WRITE = 0x48;
+
+	ppc_md.setup_arch     = pplus_setup_arch;
+	ppc_md.show_percpuinfo = NULL;
+	ppc_md.show_cpuinfo    = pplus_show_cpuinfo;
+	ppc_md.irq_cannonicalize = pplus_irq_cannonicalize;
+	ppc_md.init_IRQ       = pplus_init_IRQ;
+	/* this gets changed later on if we have an OpenPIC -- Cort */
+	ppc_md.get_irq        = i8259_irq;
+	ppc_md.init           = pplus_init2;
+
+	ppc_md.restart        = pplus_restart;
+	ppc_md.power_off      = pplus_power_off;
+	ppc_md.halt           = pplus_halt;
+
+	TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
+		  PREP_NVRAM_DATA, 8);
+
+	ppc_md.time_init      = todc_time_init;
+	ppc_md.set_rtc_time   = todc_set_rtc_time;
+	ppc_md.get_rtc_time   = todc_get_rtc_time;
+	ppc_md.calibrate_decr = todc_calibrate_decr;
+	ppc_md.nvram_read_val = todc_m48txx_read_val;
+	ppc_md.nvram_write_val = todc_m48txx_write_val;
+
+	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
+	ppc_md.setup_io_mappings = pplus_map_io;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+	ppc_ide_md.default_irq = pplus_ide_default_irq;
+	ppc_ide_md.default_io_base = pplus_ide_default_io_base;
+	ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
+#endif
+
+#ifdef CONFIG_VT
+	ppc_md.kbd_setkeycode    = pckbd_setkeycode;
+	ppc_md.kbd_getkeycode    = pckbd_getkeycode;
+	ppc_md.kbd_translate     = pckbd_translate;
+	ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
+	ppc_md.kbd_leds          = pckbd_leds;
+	ppc_md.kbd_init_hw       = pckbd_init_hw;
+#ifdef CONFIG_MAGIC_SYSRQ
+	ppc_md.ppc_kbd_sysrq_xlate	 = pckbd_sysrq_xlate;
+	SYSRQ_KEY = 0x54;
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL) && \
+	(defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB))
+	pplus_early_serial_map();
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+#endif
+
+#ifdef CONFIG_SMP
+	ppc_md.smp_ops		 = &pplus_smp_ops;
+#endif /* CONFIG_SMP */
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)