patch-2.4.22 linux-2.4.22/arch/sh64/kernel/irq.c

Next file: linux-2.4.22/arch/sh64/kernel/irq_intc.c
Previous file: linux-2.4.22/arch/sh64/kernel/init_task.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/sh64/kernel/irq.c linux-2.4.22/arch/sh64/kernel/irq.c
@@ -0,0 +1,706 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * IRQs are in fact implemented a bit like signal handlers for the kernel.
+ * Naturally it's not a 1:1 relation, but there are similarities.
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <linux/irq.h>
+
+/*
+ * Controller mappings for all interrupt sources:
+ */
+irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned =
+	{ [0 ... NR_IRQS-1] = { 0, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
+
+/*
+ * Special irq handlers.
+ */
+
+void no_action(int cpl, void *dev_id, struct pt_regs *regs) { }
+
+/*
+ * Generic no controller code
+ */
+
+static void enable_none(unsigned int irq) { }
+static unsigned int startup_none(unsigned int irq) { return 0; }
+static void disable_none(unsigned int irq) { }
+static void ack_none(unsigned int irq)
+{
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves, it doesnt deserve
+ * a generic callback i think.
+ */
+	printk("unexpected IRQ trap at irq %02x\n", irq);
+}
+
+/* startup is the same as "enable", shutdown is same as "disable" */
+#define shutdown_none	disable_none
+#define end_none	enable_none
+
+struct hw_interrupt_type no_irq_type = {
+	"none",
+	startup_none,
+	shutdown_none,
+	enable_none,
+	disable_none,
+	ack_none,
+	end_none
+};
+
+
+/*
+ * do_NMI handles all Non-Maskable Interrupts.
+ */
+asmlinkage void do_NMI(unsigned long vector_num, struct pt_regs * regs)
+{	
+	if (regs->sr & 0x40000000)
+		printk("unexpected NMI trap in system mode\n");
+	else
+		printk("unexpected NMI trap in user mode\n");
+
+	/* No statistics */
+}
+
+
+/*
+ * Generic, controller-independent functions:
+ */
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int get_irq_list(char *buf)
+{
+	int i, j;
+	struct irqaction * action;
+	char *p = buf;
+
+	p += sprintf(p, "           ");
+	for (j=0; j<smp_num_cpus; j++)
+		p += sprintf(p, "CPU%d       ",j);
+	*p++ = '\n';
+
+	for (i = 0 ; i < NR_IRQS ; i++) {
+		action = irq_desc[i].action;
+		if (!action) 
+			continue;
+		p += sprintf(p, "%3d: ",i);
+		p += sprintf(p, "%10u ", kstat_irqs(i));
+		p += sprintf(p, " %14s", irq_desc[i].handler->typename);
+		p += irq_describe(p, i);
+		p += sprintf(p, "  %s", action->name);
+
+		for (action=action->next; action; action = action->next)
+			p += sprintf(p, ", %s", action->name);
+		*p++ = '\n';
+	}
+#if 0
+	p += sprintf(p, "NMI: ");
+	for (j = 0; j < smp_num_cpus; j++)
+		p += sprintf(p, "%10u ",
+			atomic_read(&nmi_counter(cpu_logical_map(j))));
+	p += sprintf(p, "\n");
+#endif
+
+	return p - buf;
+}
+#endif
+
+/*
+ * This should really return information about whether
+ * we should do bottom half handling etc. Right now we
+ * end up _always_ checking the bottom half, which is a
+ * waste of time and is not what some drivers would
+ * prefer.
+ */
+int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
+{
+	int status;
+	int cpu = smp_processor_id();
+
+	irq_enter(cpu, irq);
+
+	status = 1;	/* Force the "do bottom halves" bit */
+
+        if (!(action->flags & SA_INTERRUPT))
+                __sti();
+
+	do {
+		status |= action->flags;
+		action->handler(irq, action->dev_id, regs);
+		action = action->next;
+	} while (action);
+	if (status & SA_SAMPLE_RANDOM)
+		add_interrupt_randomness(irq);
+
+	__cli();
+
+	irq_exit(cpu, irq);
+
+	return status;
+}
+
+/*
+ * Generic enable/disable code: this just calls
+ * down into the PIC-specific version for the actual
+ * hardware disable after having gotten the irq
+ * controller lock. 
+ */
+
+/**
+ *	disable_irq_nosync - disable an irq without waiting
+ *	@irq: Interrupt to disable
+ *
+ *	Disable the selected interrupt line. Disables of an interrupt
+ *	stack. Unlike disable_irq(), this function does not ensure existing
+ *	instances of the IRQ handler have completed before returning.
+ *
+ *	This function may be called from IRQ context.
+ */
+void disable_irq_nosync(unsigned int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&desc->lock, flags);
+	if (!desc->depth++) {
+		desc->status |= IRQ_DISABLED;
+		desc->handler->disable(irq);
+	}
+	spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+/**
+ *	disable_irq - disable an irq and wait for completion
+ *	@irq: Interrupt to disable
+ *
+ *	Disable the selected interrupt line. Disables of an interrupt
+ *	stack. That is for two disables you need two enables. This
+ *	function waits for any pending IRQ handlers for this interrupt
+ *	to complete before returning. If you use this function while
+ *	holding a resource the IRQ handler may need you will deadlock.
+ *
+ *	This function may be called - with care - from IRQ context.
+ */
+void disable_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+
+	if (!local_irq_count(smp_processor_id())) {
+		do {
+			barrier();
+		} while (irq_desc[irq].status & IRQ_INPROGRESS);
+	}
+}
+
+/**
+ *	enable_irq - enable interrupt handling on an irq
+ *	@irq: Interrupt to enable
+ *
+ *	Re-enables the processing of interrupts on this IRQ line
+ *	providing no disable_irq calls are now in effect.
+ *
+ *	This function may be called from IRQ context.
+ */
+void enable_irq(unsigned int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&desc->lock, flags);
+	switch (desc->depth) {
+	case 1: {
+		unsigned int status = desc->status & ~IRQ_DISABLED;
+		desc->status = status;
+		if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
+			desc->status = status | IRQ_REPLAY;
+			hw_resend_irq(desc->handler,irq);
+		}
+		desc->handler->enable(irq);
+		/* fall-through */
+	}
+	default:
+		desc->depth--;
+		break;
+	case 0:
+		printk("enable_irq() unbalanced from %p\n",
+		       __builtin_return_address(0));
+	}
+	spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+/*
+ * do_IRQ handles all normal device IRQ's.
+ */
+asmlinkage int do_IRQ(unsigned long vector_num, struct pt_regs * regs)
+{	
+	/* 
+	 * We ack quickly, we don't want the irq controller
+	 * thinking we're snobs just because some other CPU has
+	 * disabled global interrupts (we have already done the
+	 * INT_ACK cycles, it's too late to try to pretend to the
+	 * controller that we aren't taking the interrupt).
+	 *
+	 * 0 return value means that this irq is already being
+	 * handled by some other CPU. (or is disabled)
+	 */
+	int irq;
+	int cpu = smp_processor_id();
+	irq_desc_t *desc;
+	struct irqaction * action;
+	unsigned int status;
+
+	irq = irq_demux(vector_num);
+
+	/*
+	 * Should never happen, if it does check
+	 * vectorN_to_IRQ[] against trap_jtable[].
+	 */
+	if (irq == -1) {
+		printk("unexpected IRQ trap at vector %03lx\n", vector_num);
+		return 1;
+	}
+
+	desc = irq_desc + irq;
+
+	kstat.irqs[cpu][irq]++;
+	spin_lock(&desc->lock);
+	desc->handler->ack(irq);
+	/*
+	   REPLAY is when Linux resends an IRQ that was dropped earlier
+	   WAITING is used by probe to mark irqs that are being tested
+	   */
+	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
+	status |= IRQ_PENDING; /* we _want_ to handle it */
+
+	/*
+	 * If the IRQ is disabled for whatever reason, we cannot
+	 * use the action we have.
+	 */
+	action = NULL;
+	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		action = desc->action;
+		status &= ~IRQ_PENDING; /* we commit to handling */
+		status |= IRQ_INPROGRESS; /* we are handling it */
+	}
+	desc->status = status;
+
+	/*
+	 * If there is no IRQ handler or it was disabled, exit early.
+	   Since we set PENDING, if another processor is handling
+	   a different instance of this same irq, the other processor
+	   will take care of it.
+	 */
+	if (!action)
+		goto out;
+
+	/*
+	 * Edge triggered interrupts need to remember
+	 * pending events.
+	 * This applies to any hw interrupts that allow a second
+	 * instance of the same irq to arrive while we are in do_IRQ
+	 * or in the handler. But the code here only handles the _second_
+	 * instance of the irq, not the third or fourth. So it is mostly
+	 * useful for irq hardware that does not mask cleanly in an
+	 * SMP environment.
+	 */
+	for (;;) {
+		spin_unlock(&desc->lock);
+		handle_IRQ_event(irq, regs, action);
+		spin_lock(&desc->lock);
+
+		if (!(desc->status & IRQ_PENDING))
+			break;
+		desc->status &= ~IRQ_PENDING;
+	}
+	desc->status &= ~IRQ_INPROGRESS;
+out:
+	/*
+	 * The ->end() handler has to deal with interrupts which got
+	 * disabled while the handler was running.
+	 */
+	desc->handler->end(irq);
+	spin_unlock(&desc->lock);
+
+	if (softirq_pending(cpu))
+		do_softirq();
+	return 1;
+}
+
+/**
+ *	request_irq - allocate an interrupt line
+ *	@irq: Interrupt line to allocate
+ *	@handler: Function to be called when the IRQ occurs
+ *	@irqflags: Interrupt type flags
+ *	@devname: An ascii name for the claiming device
+ *	@dev_id: A cookie passed back to the handler function
+ *
+ *	This call allocates interrupt resources and enables the
+ *	interrupt line and IRQ handling. From the point this
+ *	call is made your handler function may be invoked. Since
+ *	your handler function must clear any interrupt the board
+ *	raises, you must take care both to initialise your hardware
+ *	and to set up the interrupt handler in the right order.
+ *
+ *	Dev_id must be globally unique. Normally the address of the
+ *	device data structure is used as the cookie. Since the handler
+ *	receives this value it makes sense to use it.
+ *
+ *	If your interrupt is shared you must pass a non NULL dev_id
+ *	as this is required when freeing the interrupt.
+ *
+ *	Flags:
+ *
+ *	SA_SHIRQ		Interrupt is shared
+ *
+ *	SA_INTERRUPT		Disable local interrupts while processing
+ *
+ *	SA_SAMPLE_RANDOM	The interrupt can be used for entropy
+ *
+ */
+int request_irq(unsigned int irq, 
+		void (*handler)(int, void *, struct pt_regs *),
+		unsigned long irqflags, 
+		const char * devname,
+		void *dev_id)
+{
+	int retval;
+	struct irqaction * action;
+
+#if 1
+	/*
+	 * Sanity-check: shared interrupts should REALLY pass in
+	 * a real dev-ID, otherwise we'll have trouble later trying
+	 * to figure out which interrupt is which (messes up the
+	 * interrupt freeing logic etc).
+	 */
+	if (irqflags & SA_SHIRQ) {
+		if (!dev_id)
+			printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
+	}
+#endif
+
+	if (irq >= NR_IRQS)
+		return -EINVAL;
+	if (!handler)
+		return -EINVAL;
+
+	action = (struct irqaction *)
+			kmalloc(sizeof(struct irqaction), GFP_KERNEL);
+	if (!action)
+		return -ENOMEM;
+
+	action->handler = handler;
+	action->flags = irqflags;
+	action->mask = 0;
+	action->name = devname;
+	action->next = NULL;
+	action->dev_id = dev_id;
+
+	retval = setup_irq(irq, action);
+	if (retval)
+		kfree(action);
+	return retval;
+}
+
+/**
+ *	free_irq - free an interrupt
+ *	@irq: Interrupt line to free
+ *	@dev_id: Device identity to free
+ *
+ *	Remove an interrupt handler. The handler is removed and if the
+ *	interrupt line is no longer in use by any driver it is disabled.
+ *	On a shared IRQ the caller must ensure the interrupt is disabled
+ *	on the card it drives before calling this function. The function
+ *	does not return until any executing interrupts for this IRQ
+ *	have completed.
+ *
+ *	This function may be called from interrupt context.
+ *
+ *	Bugs: Attempting to free an irq in a handler for the same irq hangs
+ *	      the machine.
+ */
+void free_irq(unsigned int irq, void *dev_id)
+{
+	irq_desc_t *desc;
+	struct irqaction **p;
+	unsigned long flags;
+
+	if (irq >= NR_IRQS)
+		return;
+
+	desc = irq_desc + irq;
+	spin_lock_irqsave(&desc->lock,flags);
+	p = &desc->action;
+	for (;;) {
+		struct irqaction * action = *p;
+		if (action) {
+			struct irqaction **pp = p;
+			p = &action->next;
+			if (action->dev_id != dev_id)
+				continue;
+
+			/* Found it - now remove it from the list of entries */
+			*pp = action->next;
+			if (!desc->action) {
+				desc->status |= IRQ_DISABLED;
+				desc->handler->shutdown(irq);
+			}
+			spin_unlock_irqrestore(&desc->lock,flags);
+			kfree(action);
+			return;
+		}
+		printk("Trying to free free IRQ%d\n",irq);
+		spin_unlock_irqrestore(&desc->lock,flags);
+		return;
+	}
+}
+
+/*
+ * IRQ autodetection code..
+ *
+ * This depends on the fact that any interrupt that
+ * comes in on to an unassigned handler will get stuck
+ * with "IRQ_WAITING" cleared and the interrupt
+ * disabled.
+ */
+
+/**
+ *	probe_irq_on	- begin an interrupt autodetect
+ *
+ *	Commence probing for an interrupt. The interrupts are scanned
+ *	and a mask of potential interrupt lines is returned.
+ *
+ */
+unsigned long probe_irq_on(void)
+{
+	unsigned int i;
+	irq_desc_t *desc;
+	unsigned long val;
+	unsigned long delay;
+
+	/*
+	 * something may have generated an irq long ago and we want to
+	 * flush such a longstanding irq before considering it as spurious.
+	 */
+	for (i = NR_IRQS-1; i >= 0; i--) {
+		desc = irq_desc + i;
+
+		spin_lock_irq(&desc->lock);
+		if (!irq_desc[i].action) {
+			irq_desc[i].handler->startup(i);
+		}
+		spin_unlock_irq(&desc->lock);
+	}
+
+	/* Wait for longstanding interrupts to trigger. */
+	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
+		/* about 20ms delay */ synchronize_irq();
+
+	/*
+	 * enable any unassigned irqs
+	 * (we must startup again here because if a longstanding irq
+	 * happened in the previous stage, it may have masked itself)
+	 */
+	for (i = NR_IRQS-1; i >= 0; i--) {
+		desc = irq_desc + 1;
+
+		spin_lock_irq(&desc->lock);
+		if (!desc->action) {
+			desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
+			if (desc->handler->startup(i))
+				desc->status |= IRQ_PENDING;
+		}
+		spin_unlock_irq(&desc->lock);
+	}
+
+	/*
+	 * Wait for spurious interrupts to trigger
+	 */
+	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
+		/* about 100ms delay */ synchronize_irq();
+
+	/*
+	 * Now filter out any obviously spurious interrupts
+	 */
+	val = 0;
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc_t *desc = irq_desc + i;
+		unsigned int status;
+
+		spin_lock_irq(&desc->lock);
+		status = desc->status;
+
+		if (status & IRQ_AUTODETECT) {
+			/* It triggered already - consider it spurious. */
+			if (!(status & IRQ_WAITING)) {
+				desc->status = status & ~IRQ_AUTODETECT;
+				desc->handler->shutdown(i);
+			} else
+				if (i < 32)
+					val |= 1 << i;
+		}
+		spin_unlock_irq(&desc->lock);
+	}
+
+	return val;
+}
+
+/*
+ * Return the one interrupt that triggered (this can
+ * handle any interrupt source).
+ */
+
+/**
+ *	probe_irq_off   - end an interrupt autodetect
+ *	@val: mask of potential interrupts (unused)
+ *
+ *	Scans the unused interrupt lines and returns the line which
+ *	appears to have triggered the interrupt. If no interrupt was
+ *	found then zero is returned. If more than one interrupt is
+ *	found then minus the first candidate is returned to indicate
+ *	their is doubt.
+ *
+ *	The interrupt probe logic state is returned to its previous
+ *	value.
+ *
+ *	BUGS: When used in a module (which arguably shouldnt happen)
+ *	nothing prevents two IRQ probe callers from overlapping. The
+ *	results of this are non-optimal.
+ */
+int probe_irq_off(unsigned long val)
+{
+	int i, irq_found, nr_irqs;
+
+	nr_irqs = 0;
+	irq_found = 0;
+	for (i=0; i<NR_IRQS; i++) {
+		irq_desc_t *desc = irq_desc + i;
+		unsigned int status;
+
+		spin_lock_irq(&desc->lock);
+		status = desc->status;
+		if (!(status & IRQ_AUTODETECT))
+			continue;
+
+		if (status & IRQ_AUTODETECT) {
+			if (!(status & IRQ_WAITING)) {
+				if (!nr_irqs)
+					irq_found = i;
+				nr_irqs++;
+			}
+
+			desc->status = status & ~IRQ_AUTODETECT;
+			desc->handler->shutdown(i);
+		}
+		spin_unlock_irq(&desc->lock);
+	}
+
+	if (nr_irqs > 1)
+		irq_found = -irq_found;
+	return irq_found;
+}
+
+int setup_irq(unsigned int irq, struct irqaction * new)
+{
+	int shared = 0;
+	unsigned long flags;
+	struct irqaction *old, **p;
+	irq_desc_t *desc = irq_desc + irq;
+
+	/*
+	 * Some drivers like serial.c use request_irq() heavily,
+	 * so we have to be careful not to interfere with a
+	 * running system.
+	 */
+	if (new->flags & SA_SAMPLE_RANDOM) {
+		/*
+		 * This function might sleep, we want to call it first,
+		 * outside of the atomic block.
+		 * Yes, this might clear the entropy pool if the wrong
+		 * driver is attempted to be loaded, without actually
+		 * installing a new handler, but is this really a problem,
+		 * only the sysadmin is able to do this.
+		 */
+		rand_initialize_irq(irq);
+	}
+
+	/*
+	 * The following block of code has to be executed atomically
+	 */
+	spin_lock_irqsave(&desc->lock,flags);
+	p = &desc->action;
+	if ((old = *p) != NULL) {
+		/* Can't share interrupts unless both agree to */
+		if (!(old->flags & new->flags & SA_SHIRQ)) {
+			spin_unlock_irqrestore(&desc->lock,flags);
+			return -EBUSY;
+		}
+
+		/* add new interrupt at end of irq queue */
+		do {
+			p = &old->next;
+			old = *p;
+		} while (old);
+		shared = 1;
+	}
+
+	*p = new;
+
+	if (!shared) {
+		desc->depth = 0;
+		desc->status &= ~IRQ_DISABLED;
+		desc->handler->startup(irq);
+	}
+	spin_unlock_irqrestore(&desc->lock,flags);
+
+	/*
+	 * No PROC FS support for interrupts.
+	 * For improvements in this area please check
+	 * the i386 branch.
+	 */
+	return 0;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+
+void init_irq_proc(void)
+{
+	/*
+	 * No PROC FS support for interrupts.
+	 * For improvements in this area please check
+	 * the i386 branch.
+	 */
+}
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)