patch-2.4.22 linux-2.4.22/arch/sh/kernel/setup_snapgear.c

Next file: linux-2.4.22/arch/sh/kernel/sh_ksyms.c
Previous file: linux-2.4.22/arch/sh/kernel/setup_shmse.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/sh/kernel/setup_snapgear.c linux-2.4.22/arch/sh/kernel/setup_snapgear.c
@@ -0,0 +1,186 @@
+/****************************************************************************/
+/* 
+ * linux/arch/sh/kernel/setup_snapgear.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/****************************************************************************/
+/*
+ * EraseConfig handling functions
+ */
+
+static void
+eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#if defined(CONFIG_SH_SECUREEDGE5410)
+{
+	volatile char dummy = * (volatile char *) 0xb8000000;
+}
+#endif
+#ifdef CONFIG_LEDMAN
+	ledman_signalreset();
+#else
+	printk("SnapGear: erase switch interrupt!\n");
+#endif
+}
+
+static int __init
+eraseconfig_init(void)
+{
+	printk("SnapGear: EraseConfig init\n");
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT,
+				"Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				IRL0_IRQ);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				IRL0_IRQ);
+	return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+void __init
+init_snapgear_IRQ(void)
+{
+	/* enable individual interrupt mode for externals */
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+
+	printk("Setup SnapGear IRQ/IPR ...\n");
+
+	make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
+	make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
+	make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
+	make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
+}
+
+/****************************************************************************/
+/*
+ *	Fast poll interrupt simulator.
+ */
+
+#define FAST_POLL	1000
+//#define FAST_POLL_INTR
+
+#define FASTTIMER_IRQ   17
+#define FASTTIMER_IPR_ADDR  INTC_IPRA
+#define FASTTIMER_IPR_POS    2
+#define FASTTIMER_PRIORITY   3
+
+#ifdef FAST_POLL_INTR
+#define TMU1_TCR_INIT	0x0020
+#else
+#define TMU1_TCR_INIT	0
+#endif
+#define TMU_TSTR_INIT	1
+#define TMU1_TCR_CALIB	0x0000
+#define TMU_TOCR	0xffd80000	/* Byte access */
+#define TMU_TSTR	0xffd80004	/* Byte access */
+#define TMU1_TCOR	0xffd80014	/* Long access */
+#define TMU1_TCNT	0xffd80018	/* Long access */
+#define TMU1_TCR	0xffd8001c	/* Word access */
+
+
+#ifdef FAST_POLL_INTR
+static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	unsigned long timer_status;
+    timer_status = ctrl_inw(TMU1_TCR);
+	timer_status &= ~0x100;
+	ctrl_outw(timer_status, TMU1_TCR);
+}
+#endif
+
+/*
+ * return the current ticks on the fast timer
+ */
+
+unsigned long
+fast_timer_count(void)
+{
+	return(ctrl_inl(TMU1_TCNT));
+}
+
+/*
+ * setup a fast timer for profiling etc etc
+ */
+
+static void
+setup_fast_timer()
+{
+	unsigned long interval;
+
+#ifdef FAST_POLL_INTR
+	interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL;
+
+	make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS,
+			FASTTIMER_PRIORITY);
+
+	printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ);
+
+	if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer",
+			NULL) != 0)
+		printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__);
+#else
+	printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ);
+	interval = 0xffffffff;
+#endif
+
+	ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */
+	ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
+	ctrl_outl(interval, TMU1_TCOR);
+	ctrl_outl(interval, TMU1_TCNT);
+	ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */
+
+	printk("Timer count 1 = 0x%x\n", fast_timer_count());
+	udelay(1000);
+	printk("Timer count 2 = 0x%x\n", fast_timer_count());
+}
+
+/****************************************************************************/
+/*
+ * Initialize the board
+ */
+
+void __init
+setup_snapgear(void)
+{
+	/* XXX: RTC setting comes here */
+#ifdef CONFIG_RTC
+	secureedge5410_rtc_init();
+#endif
+ 	// setup_fast_timer();
+}
+
+/****************************************************************************/

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)