patch-2.4.22 linux-2.4.22/drivers/acpi/events/evgpeblk.c
Next file: linux-2.4.22/drivers/acpi/events/evmisc.c
Previous file: linux-2.4.22/drivers/acpi/events/evgpe.c
Back to the patch index
Back to the overall index
- Lines: 904
- Date:
2003-08-25 04:44:41.000000000 -0700
- Orig file:
linux-2.4.21/drivers/acpi/events/evgpeblk.c
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.21/drivers/acpi/events/evgpeblk.c linux-2.4.22/drivers/acpi/events/evgpeblk.c
@@ -0,0 +1,903 @@
+/******************************************************************************
+ *
+ * Module Name: evgpeblk - GPE block creation and initialization.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2003, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acevents.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT ACPI_EVENTS
+ ACPI_MODULE_NAME ("evgpeblk")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_valid_gpe_event
+ *
+ * PARAMETERS: gpe_event_info - Info for this GPE
+ *
+ * RETURN: TRUE if the gpe_event is valid
+ *
+ * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
+ * Should be called only when the GPE lists are semaphore locked
+ * and not subject to change.
+ *
+ ******************************************************************************/
+
+u8
+acpi_ev_valid_gpe_event (
+ struct acpi_gpe_event_info *gpe_event_info)
+{
+ struct acpi_gpe_xrupt_info *gpe_xrupt_block;
+ struct acpi_gpe_block_info *gpe_block;
+
+
+ ACPI_FUNCTION_ENTRY ();
+
+
+ /* No need for spin lock since we are not changing any list elements */
+
+ /* Walk the GPE interrupt levels */
+
+ gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
+ while (gpe_xrupt_block) {
+ gpe_block = gpe_xrupt_block->gpe_block_list_head;
+
+ /* Walk the GPE blocks on this interrupt level */
+
+ while (gpe_block) {
+ if ((&gpe_block->event_info[0] <= gpe_event_info) &&
+ (&gpe_block->event_info[((acpi_size) gpe_block->register_count) * 8] > gpe_event_info)) {
+ return (TRUE);
+ }
+
+ gpe_block = gpe_block->next;
+ }
+
+ gpe_xrupt_block = gpe_xrupt_block->next;
+ }
+
+ return (FALSE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_walk_gpe_list
+ *
+ * PARAMETERS: gpe_walk_callback - Routine called for each GPE block
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Walk the GPE lists.
+ * FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_walk_gpe_list (
+ ACPI_GPE_CALLBACK gpe_walk_callback)
+{
+ struct acpi_gpe_block_info *gpe_block;
+ struct acpi_gpe_xrupt_info *gpe_xrupt_info;
+ acpi_status status = AE_OK;
+
+
+ ACPI_FUNCTION_TRACE ("ev_walk_gpe_list");
+
+
+ acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_ISR);
+
+ /* Walk the interrupt level descriptor list */
+
+ gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
+ while (gpe_xrupt_info) {
+ /* Walk all Gpe Blocks attached to this interrupt level */
+
+ gpe_block = gpe_xrupt_info->gpe_block_list_head;
+ while (gpe_block) {
+ /* One callback per GPE block */
+
+ status = gpe_walk_callback (gpe_xrupt_info, gpe_block);
+ if (ACPI_FAILURE (status)) {
+ goto unlock_and_exit;
+ }
+
+ gpe_block = gpe_block->next;
+ }
+
+ gpe_xrupt_info = gpe_xrupt_info->next;
+ }
+
+unlock_and_exit:
+ acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_ISR);
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_save_method_info
+ *
+ * PARAMETERS: Callback from walk_namespace
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
+ * control method under the _GPE portion of the namespace.
+ * Extract the name and GPE type from the object, saving this
+ * information for quick lookup during GPE dispatch
+ *
+ * The name of each GPE control method is of the form:
+ * "_Lnn" or "_Enn"
+ * Where:
+ * L - means that the GPE is level triggered
+ * E - means that the GPE is edge triggered
+ * nn - is the GPE number [in HEX]
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_save_method_info (
+ acpi_handle obj_handle,
+ u32 level,
+ void *obj_desc,
+ void **return_value)
+{
+ struct acpi_gpe_block_info *gpe_block = (void *) obj_desc;
+ struct acpi_gpe_event_info *gpe_event_info;
+ u32 gpe_number;
+ char name[ACPI_NAME_SIZE + 1];
+ u8 type;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_save_method_info");
+
+
+ /* Extract the name from the object and convert to a string */
+
+ ACPI_MOVE_32_TO_32 (name,
+ &((struct acpi_namespace_node *) obj_handle)->name.integer);
+ name[ACPI_NAME_SIZE] = 0;
+
+ /*
+ * Edge/Level determination is based on the 2nd character
+ * of the method name
+ */
+ switch (name[1]) {
+ case 'L':
+ type = ACPI_EVENT_LEVEL_TRIGGERED;
+ break;
+
+ case 'E':
+ type = ACPI_EVENT_EDGE_TRIGGERED;
+ break;
+
+ default:
+ /* Unknown method type, just ignore it! */
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+ "Unknown GPE method type: %s (name not of form _Lnn or _Enn)\n",
+ name));
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /* Convert the last two characters of the name to the GPE Number */
+
+ gpe_number = ACPI_STRTOUL (&name[2], NULL, 16);
+ if (gpe_number == ACPI_UINT32_MAX) {
+ /* Conversion failed; invalid method, just ignore it */
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+ "Could not extract GPE number from name: %s (name is not of form _Lnn or _Enn)\n",
+ name));
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /* Ensure that we have a valid GPE number for this GPE block */
+
+ if ((gpe_number < gpe_block->block_base_number) ||
+ (gpe_number >= (gpe_block->block_base_number + (gpe_block->register_count * 8)))) {
+ /*
+ * Not valid for this GPE block, just ignore it
+ * However, it may be valid for a different GPE block, since GPE0 and GPE1
+ * methods both appear under \_GPE.
+ */
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /*
+ * Now we can add this information to the gpe_event_info block
+ * for use during dispatch of this GPE.
+ */
+ gpe_event_info = &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
+
+ gpe_event_info->flags = type;
+ gpe_event_info->method_node = (struct acpi_namespace_node *) obj_handle;
+
+ /* Enable the GPE (SCIs should be disabled at this point) */
+
+ status = acpi_hw_enable_gpe (gpe_event_info);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_LOAD,
+ "Registered GPE method %s as GPE number 0x%.2X\n",
+ name, gpe_number));
+ return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_get_gpe_xrupt_block
+ *
+ * PARAMETERS: interrupt_level - Interrupt for a GPE block
+ *
+ * RETURN: A GPE interrupt block
+ *
+ * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
+ * block per unique interrupt level used for GPEs.
+ * Should be called only when the GPE lists are semaphore locked
+ * and not subject to change.
+ *
+ ******************************************************************************/
+
+static struct acpi_gpe_xrupt_info *
+acpi_ev_get_gpe_xrupt_block (
+ u32 interrupt_level)
+{
+ struct acpi_gpe_xrupt_info *next_gpe_xrupt;
+ struct acpi_gpe_xrupt_info *gpe_xrupt;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_get_gpe_xrupt_block");
+
+
+ /* No need for spin lock since we are not changing any list elements here */
+
+ next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
+ while (next_gpe_xrupt) {
+ if (next_gpe_xrupt->interrupt_level == interrupt_level) {
+ return_PTR (next_gpe_xrupt);
+ }
+
+ next_gpe_xrupt = next_gpe_xrupt->next;
+ }
+
+ /* Not found, must allocate a new xrupt descriptor */
+
+ gpe_xrupt = ACPI_MEM_CALLOCATE (sizeof (struct acpi_gpe_xrupt_info));
+ if (!gpe_xrupt) {
+ return_PTR (NULL);
+ }
+
+ gpe_xrupt->interrupt_level = interrupt_level;
+
+ /* Install new interrupt descriptor with spin lock */
+
+ acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+ if (acpi_gbl_gpe_xrupt_list_head) {
+ next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
+ while (next_gpe_xrupt->next) {
+ next_gpe_xrupt = next_gpe_xrupt->next;
+ }
+
+ next_gpe_xrupt->next = gpe_xrupt;
+ gpe_xrupt->previous = next_gpe_xrupt;
+ }
+ else {
+ acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
+ }
+ acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+
+ /* Install new interrupt handler if not SCI_INT */
+
+ if (interrupt_level != acpi_gbl_FADT->sci_int) {
+ status = acpi_os_install_interrupt_handler (interrupt_level,
+ acpi_ev_gpe_xrupt_handler, gpe_xrupt);
+ if (ACPI_FAILURE (status)) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+ "Could not install GPE interrupt handler at level 0x%X\n",
+ interrupt_level));
+ return_PTR (NULL);
+ }
+ }
+
+ return_PTR (gpe_xrupt);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_delete_gpe_xrupt
+ *
+ * PARAMETERS: gpe_xrupt - A GPE interrupt info block
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
+ * interrupt handler if not the SCI interrupt.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_delete_gpe_xrupt (
+ struct acpi_gpe_xrupt_info *gpe_xrupt)
+{
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_delete_gpe_xrupt");
+
+
+ /* We never want to remove the SCI interrupt handler */
+
+ if (gpe_xrupt->interrupt_level == acpi_gbl_FADT->sci_int) {
+ gpe_xrupt->gpe_block_list_head = NULL;
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /* Disable this interrupt */
+
+ status = acpi_os_remove_interrupt_handler (gpe_xrupt->interrupt_level,
+ acpi_ev_gpe_xrupt_handler);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ /* Unlink the interrupt block with lock */
+
+ acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+ if (gpe_xrupt->previous) {
+ gpe_xrupt->previous->next = gpe_xrupt->next;
+ }
+
+ if (gpe_xrupt->next) {
+ gpe_xrupt->next->previous = gpe_xrupt->previous;
+ }
+ acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+
+ /* Free the block */
+
+ ACPI_MEM_FREE (gpe_xrupt);
+ return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_install_gpe_block
+ *
+ * PARAMETERS: gpe_block - New GPE block
+ * interrupt_level - Level to be associated with this GPE block
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install new GPE block with mutex support
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_install_gpe_block (
+ struct acpi_gpe_block_info *gpe_block,
+ u32 interrupt_level)
+{
+ struct acpi_gpe_block_info *next_gpe_block;
+ struct acpi_gpe_xrupt_info *gpe_xrupt_block;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_install_gpe_block");
+
+
+ status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block (interrupt_level);
+ if (!gpe_xrupt_block) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ /* Install the new block at the end of the list for this interrupt with lock */
+
+ acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+ if (gpe_xrupt_block->gpe_block_list_head) {
+ next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
+ while (next_gpe_block->next) {
+ next_gpe_block = next_gpe_block->next;
+ }
+
+ next_gpe_block->next = gpe_block;
+ gpe_block->previous = next_gpe_block;
+ }
+ else {
+ gpe_xrupt_block->gpe_block_list_head = gpe_block;
+ }
+
+ gpe_block->xrupt_block = gpe_xrupt_block;
+ acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+
+unlock_and_exit:
+ status = acpi_ut_release_mutex (ACPI_MTX_EVENTS);
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_delete_gpe_block
+ *
+ * PARAMETERS: gpe_block - Existing GPE block
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install new GPE block with mutex support
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_delete_gpe_block (
+ struct acpi_gpe_block_info *gpe_block)
+{
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_install_gpe_block");
+
+
+ status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ /* Disable all GPEs in this block */
+
+ status = acpi_hw_disable_gpe_block (gpe_block->xrupt_block, gpe_block);
+
+ if (!gpe_block->previous && !gpe_block->next) {
+ /* This is the last gpe_block on this interrupt */
+
+ status = acpi_ev_delete_gpe_xrupt (gpe_block->xrupt_block);
+ if (ACPI_FAILURE (status)) {
+ goto unlock_and_exit;
+ }
+ }
+ else {
+ /* Remove the block on this interrupt with lock */
+
+ acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+ if (gpe_block->previous) {
+ gpe_block->previous->next = gpe_block->next;
+ }
+ else {
+ gpe_block->xrupt_block->gpe_block_list_head = gpe_block->next;
+ }
+
+ if (gpe_block->next) {
+ gpe_block->next->previous = gpe_block->previous;
+ }
+ acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_NOT_ISR);
+ }
+
+ /* Free the gpe_block */
+
+ ACPI_MEM_FREE (gpe_block->register_info);
+ ACPI_MEM_FREE (gpe_block->event_info);
+ ACPI_MEM_FREE (gpe_block);
+
+unlock_and_exit:
+ status = acpi_ut_release_mutex (ACPI_MTX_EVENTS);
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_create_gpe_info_blocks
+ *
+ * PARAMETERS: gpe_block - New GPE block
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_create_gpe_info_blocks (
+ struct acpi_gpe_block_info *gpe_block)
+{
+ struct acpi_gpe_register_info *gpe_register_info = NULL;
+ struct acpi_gpe_event_info *gpe_event_info = NULL;
+ struct acpi_gpe_event_info *this_event;
+ struct acpi_gpe_register_info *this_register;
+ acpi_native_uint i;
+ acpi_native_uint j;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_create_gpe_info_blocks");
+
+
+ /* Allocate the GPE register information block */
+
+ gpe_register_info = ACPI_MEM_CALLOCATE (
+ (acpi_size) gpe_block->register_count *
+ sizeof (struct acpi_gpe_register_info));
+ if (!gpe_register_info) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+ "Could not allocate the gpe_register_info table\n"));
+ return_ACPI_STATUS (AE_NO_MEMORY);
+ }
+
+ /*
+ * Allocate the GPE event_info block. There are eight distinct GPEs
+ * per register. Initialization to zeros is sufficient.
+ */
+ gpe_event_info = ACPI_MEM_CALLOCATE (
+ ((acpi_size) gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH) *
+ sizeof (struct acpi_gpe_event_info));
+ if (!gpe_event_info) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Could not allocate the gpe_event_info table\n"));
+ status = AE_NO_MEMORY;
+ goto error_exit;
+ }
+
+ /* Save the new Info arrays in the GPE block */
+
+ gpe_block->register_info = gpe_register_info;
+ gpe_block->event_info = gpe_event_info;
+
+ /*
+ * Initialize the GPE Register and Event structures. A goal of these
+ * tables is to hide the fact that there are two separate GPE register sets
+ * in a given gpe hardware block, the status registers occupy the first half,
+ * and the enable registers occupy the second half.
+ */
+ this_register = gpe_register_info;
+ this_event = gpe_event_info;
+
+ for (i = 0; i < gpe_block->register_count; i++) {
+ /* Init the register_info for this GPE register (8 GPEs) */
+
+ this_register->base_gpe_number = (u8) (gpe_block->block_base_number +
+ (i * ACPI_GPE_REGISTER_WIDTH));
+
+ ACPI_STORE_ADDRESS (this_register->status_address.address,
+ (gpe_block->block_address.address
+ + i));
+
+ ACPI_STORE_ADDRESS (this_register->enable_address.address,
+ (gpe_block->block_address.address
+ + i
+ + gpe_block->register_count));
+
+ this_register->status_address.address_space_id = gpe_block->block_address.address_space_id;
+ this_register->enable_address.address_space_id = gpe_block->block_address.address_space_id;
+ this_register->status_address.register_bit_width = ACPI_GPE_REGISTER_WIDTH;
+ this_register->enable_address.register_bit_width = ACPI_GPE_REGISTER_WIDTH;
+ this_register->status_address.register_bit_offset = ACPI_GPE_REGISTER_WIDTH;
+ this_register->enable_address.register_bit_offset = ACPI_GPE_REGISTER_WIDTH;
+
+ /* Init the event_info for each GPE within this register */
+
+ for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+ this_event->bit_mask = acpi_gbl_decode_to8bit[j];
+ this_event->register_info = this_register;
+ this_event++;
+ }
+
+ /*
+ * Clear the status/enable registers. Note that status registers
+ * are cleared by writing a '1', while enable registers are cleared
+ * by writing a '0'.
+ */
+ status = acpi_hw_low_level_write (ACPI_GPE_REGISTER_WIDTH, 0x00,
+ &this_register->enable_address);
+ if (ACPI_FAILURE (status)) {
+ goto error_exit;
+ }
+
+ status = acpi_hw_low_level_write (ACPI_GPE_REGISTER_WIDTH, 0xFF,
+ &this_register->status_address);
+ if (ACPI_FAILURE (status)) {
+ goto error_exit;
+ }
+
+ this_register++;
+ }
+
+ return_ACPI_STATUS (AE_OK);
+
+
+error_exit:
+ if (gpe_register_info) {
+ ACPI_MEM_FREE (gpe_register_info);
+ }
+ if (gpe_event_info) {
+ ACPI_MEM_FREE (gpe_event_info);
+ }
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_create_gpe_block
+ *
+ * PARAMETERS: gpe_device - Handle to the parent GPE block
+ * gpe_block_address - Address and space_iD
+ * register_count - Number of GPE register pairs in the block
+ * gpe_block_base_number - Starting GPE number for the block
+ * interrupt_level - H/W interrupt for the block
+ * return_gpe_block - Where the new block descriptor is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create and Install a block of GPE registers
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_create_gpe_block (
+ struct acpi_namespace_node *gpe_device,
+ struct acpi_generic_address *gpe_block_address,
+ u32 register_count,
+ u8 gpe_block_base_number,
+ u32 interrupt_level,
+ struct acpi_gpe_block_info **return_gpe_block)
+{
+ struct acpi_gpe_block_info *gpe_block;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_create_gpe_block");
+
+
+ if (!register_count) {
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /* Allocate a new GPE block */
+
+ gpe_block = ACPI_MEM_CALLOCATE (sizeof (struct acpi_gpe_block_info));
+ if (!gpe_block) {
+ return_ACPI_STATUS (AE_NO_MEMORY);
+ }
+
+ /* Initialize the new GPE block */
+
+ gpe_block->register_count = register_count;
+ gpe_block->block_base_number = gpe_block_base_number;
+
+ ACPI_MEMCPY (&gpe_block->block_address, gpe_block_address, sizeof (struct acpi_generic_address));
+
+ /* Create the register_info and event_info sub-structures */
+
+ status = acpi_ev_create_gpe_info_blocks (gpe_block);
+ if (ACPI_FAILURE (status)) {
+ ACPI_MEM_FREE (gpe_block);
+ return_ACPI_STATUS (status);
+ }
+
+ /* Install the new block in the global list(s) */
+
+ status = acpi_ev_install_gpe_block (gpe_block, interrupt_level);
+ if (ACPI_FAILURE (status)) {
+ ACPI_MEM_FREE (gpe_block);
+ return_ACPI_STATUS (status);
+ }
+
+ /* Dump info about this GPE block */
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "GPE %02d to %02d [%4.4s] %d regs at %8.8X%8.8X on int %d\n",
+ gpe_block->block_base_number,
+ (u32) (gpe_block->block_base_number +
+ ((gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH) -1)),
+ gpe_device->name.ascii,
+ gpe_block->register_count,
+ ACPI_HIDWORD (gpe_block->block_address.address),
+ ACPI_LODWORD (gpe_block->block_address.address),
+ interrupt_level));
+
+ /* Find all GPE methods (_Lxx, _Exx) for this block */
+
+ status = acpi_ns_walk_namespace (ACPI_TYPE_METHOD, gpe_device,
+ ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, acpi_ev_save_method_info,
+ gpe_block, NULL);
+
+ /* Return the new block */
+
+ if (return_gpe_block) {
+ (*return_gpe_block) = gpe_block;
+ }
+
+ return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_gpe_initialize
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize the GPE data structures
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_gpe_initialize (void)
+{
+ u32 register_count0 = 0;
+ u32 register_count1 = 0;
+ u32 gpe_number_max = 0;
+ acpi_handle gpe_device;
+ acpi_status status;
+
+
+ ACPI_FUNCTION_TRACE ("ev_gpe_initialize");
+
+
+ /* Get a handle to the predefined _GPE object */
+
+ status = acpi_get_handle (NULL, "\\_GPE", &gpe_device);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ /*
+ * Initialize the GPE Blocks defined in the FADT
+ *
+ * Why the GPE register block lengths are divided by 2: From the ACPI Spec,
+ * section "General-Purpose Event Registers", we have:
+ *
+ * "Each register block contains two registers of equal length
+ * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
+ * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
+ * The length of the GPE1_STS and GPE1_EN registers is equal to
+ * half the GPE1_LEN. If a generic register block is not supported
+ * then its respective block pointer and block length values in the
+ * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
+ * to be the same size."
+ */
+
+ /*
+ * Determine the maximum GPE number for this machine.
+ *
+ * Note: both GPE0 and GPE1 are optional, and either can exist without
+ * the other.
+ *
+ * If EITHER the register length OR the block address are zero, then that
+ * particular block is not supported.
+ */
+ if (acpi_gbl_FADT->gpe0_blk_len &&
+ acpi_gbl_FADT->xgpe0_blk.address) {
+ /* GPE block 0 exists (has both length and address > 0) */
+
+ register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
+
+ gpe_number_max = (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
+
+ /* Install GPE Block 0 */
+
+ status = acpi_ev_create_gpe_block (gpe_device, &acpi_gbl_FADT->xgpe0_blk,
+ register_count0, 0, acpi_gbl_FADT->sci_int, &acpi_gbl_gpe_fadt_blocks[0]);
+ if (ACPI_FAILURE (status)) {
+ ACPI_REPORT_ERROR ((
+ "Could not create GPE Block 0, %s\n",
+ acpi_format_exception (status)));
+ }
+ }
+
+ if (acpi_gbl_FADT->gpe1_blk_len &&
+ acpi_gbl_FADT->xgpe1_blk.address) {
+ /* GPE block 1 exists (has both length and address > 0) */
+
+ register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
+
+ /* Check for GPE0/GPE1 overlap (if both banks exist) */
+
+ if ((register_count0) &&
+ (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
+ ACPI_REPORT_ERROR ((
+ "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1\n",
+ gpe_number_max, acpi_gbl_FADT->gpe1_base,
+ acpi_gbl_FADT->gpe1_base +
+ ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1)));
+
+ /* Ignore GPE1 block by setting the register count to zero */
+
+ register_count1 = 0;
+ }
+ else {
+ /* Install GPE Block 1 */
+
+ status = acpi_ev_create_gpe_block (gpe_device, &acpi_gbl_FADT->xgpe1_blk,
+ register_count1, acpi_gbl_FADT->gpe1_base,
+ acpi_gbl_FADT->sci_int, &acpi_gbl_gpe_fadt_blocks[1]);
+ if (ACPI_FAILURE (status)) {
+ ACPI_REPORT_ERROR ((
+ "Could not create GPE Block 1, %s\n",
+ acpi_format_exception (status)));
+ }
+
+ /*
+ * GPE0 and GPE1 do not have to be contiguous in the GPE number
+ * space. However, GPE0 always starts at GPE number zero.
+ */
+ gpe_number_max = acpi_gbl_FADT->gpe1_base +
+ ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
+ }
+ }
+
+ /* Exit if there are no GPE registers */
+
+ if ((register_count0 + register_count1) == 0) {
+ /* GPEs are not required by ACPI, this is OK */
+
+ ACPI_REPORT_INFO (("There are no GPE blocks defined in the FADT\n"));
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /* Check for Max GPE number out-of-range */
+
+ if (gpe_number_max > ACPI_GPE_MAX) {
+ ACPI_REPORT_ERROR (("Maximum GPE number from FADT is too large: 0x%X\n",
+ gpe_number_max));
+ return_ACPI_STATUS (AE_BAD_VALUE);
+ }
+
+ return_ACPI_STATUS (AE_OK);
+}
+
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)