patch-2.4.22 linux-2.4.22/drivers/pcmcia/au1000_db1x00.c

Next file: linux-2.4.22/drivers/pcmcia/au1000_generic.c
Previous file: linux-2.4.22/drivers/pci/pci.ids
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/drivers/pcmcia/au1000_db1x00.c linux-2.4.22/drivers/pcmcia/au1000_db1x00.c
@@ -0,0 +1,269 @@
+/*
+ *
+ * Alchemy Semi Db1x00 boards specific pcmcia routines.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * 
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/tqueue.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/version.h>
+#include <linux/types.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/bulkmem.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/bus_ops.h>
+#include "cs_internal.h"
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <asm/au1000.h>
+#include <asm/au1000_pcmcia.h>
+
+#include <asm/db1x00.h>
+
+static BCSR * const bcsr = (BCSR *)0xAE000000;
+
+static int db1x00_pcmcia_init(struct pcmcia_init *init)
+{
+	bcsr->pcmcia = 0; /* turn off power */
+	au_sync_delay(2);
+	return PCMCIA_NUM_SOCKS;
+}
+
+static int db1x00_pcmcia_shutdown(void)
+{
+	bcsr->pcmcia = 0; /* turn off power */
+	au_sync_delay(2);
+	return 0;
+}
+
+static int 
+db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
+{
+	u32 inserted;
+	unsigned char vs;
+
+	if(sock > PCMCIA_MAX_SOCK) return -1;
+
+	state->ready = 0;
+	state->vs_Xv = 0;
+	state->vs_3v = 0;
+	state->detect = 0;
+
+	if (sock == 0) {
+		vs = bcsr->status & 0x3;
+		inserted = !(bcsr->status & (1<<4));
+	}
+	else {
+		vs = (bcsr->status & 0xC)>>2;
+		inserted = !(bcsr->status & (1<<5));
+	}
+
+	DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n", 
+			sock, inserted, vs);
+
+	if (inserted) {
+		switch (vs) {
+			case 0:
+			case 2:
+				state->vs_3v=1;
+				break;
+			case 3: /* 5V */
+				break;
+			default:
+				/* return without setting 'detect' */
+				printk(KERN_ERR "db1x00 bad VS (%d)\n",
+						vs);
+				return -1;
+		}
+		state->detect = 1;
+		state->ready = 1;
+	}
+	else {
+		/* if the card was previously inserted and then ejected,
+		 * we should turn off power to it
+		 */
+		if ((sock == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
+			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST | 
+					BCSR_PCMCIA_PC0DRVEN |
+					BCSR_PCMCIA_PC0VPP |
+					BCSR_PCMCIA_PC0VCC);
+		}
+		else if ((sock == 1) && (bcsr->pcmcia & BCSR_PCMCIA_PC1RST)) {
+			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST | 
+					BCSR_PCMCIA_PC1DRVEN |
+					BCSR_PCMCIA_PC1VPP |
+					BCSR_PCMCIA_PC1VCC);
+		}
+	}
+
+	state->bvd1=1;
+	state->bvd2=1;
+	state->wrprot=0; 
+	return 1;
+}
+
+
+static int db1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
+{
+	if(info->sock > PCMCIA_MAX_SOCK) return -1;
+
+	if(info->sock == 0) {
+		info->irq = AU1000_GPIO_2;
+	}
+	else 
+		info->irq = AU1000_GPIO_5;
+
+	return 0;
+}
+
+
+static int 
+db1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
+{
+	u16 pwr;
+	int sock = configure->sock;
+
+	if(sock > PCMCIA_MAX_SOCK) return -1;
+
+	DEBUG(KERN_DEBUG "socket %d Vcc %dV Vpp %dV, reset %d\n", 
+			sock, configure->vcc, configure->vpp, configure->reset);
+
+	/* pcmcia reg was set to zero at init time. Be careful when
+	 * initializing a socket not to wipe out the settings of the 
+	 * other socket.
+	 */
+	pwr = bcsr->pcmcia;
+	pwr &= ~(0xf << sock*8); /* clear voltage settings */
+
+	switch(configure->vcc){
+		case 0:  /* Vcc 0 */
+			pwr |= SET_VCC_VPP(0,0,sock);
+			break;
+		case 50: /* Vcc 5V */
+			switch(configure->vpp) {
+				case 0:
+					pwr |= SET_VCC_VPP(2,0,sock);
+					break;
+				case 50:
+					pwr |= SET_VCC_VPP(2,1,sock);
+					break;
+				case 12:
+					pwr |= SET_VCC_VPP(2,2,sock);
+					break;
+				case 33:
+				default:
+					pwr |= SET_VCC_VPP(0,0,sock);
+					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
+							__FUNCTION__, 
+							configure->vcc, 
+							configure->vpp);
+					break;
+			}
+			break;
+		case 33: /* Vcc 3.3V */
+			switch(configure->vpp) {
+				case 0:
+					pwr |= SET_VCC_VPP(1,0,sock);
+					break;
+				case 12:
+					pwr |= SET_VCC_VPP(1,2,sock);
+					break;
+				case 33:
+					pwr |= SET_VCC_VPP(1,1,sock);
+					break;
+				case 50:
+				default:
+					pwr |= SET_VCC_VPP(0,0,sock);
+					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
+							__FUNCTION__, 
+							configure->vcc, 
+							configure->vpp);
+					break;
+			}
+			break;
+		default: /* what's this ? */
+			pwr |= SET_VCC_VPP(0,0,sock);
+			printk(KERN_ERR "%s: bad Vcc %d\n", 
+					__FUNCTION__, configure->vcc);
+			break;
+	}
+
+	bcsr->pcmcia = pwr;
+	au_sync_delay(300);
+
+	if (sock == 0) {
+		if (!configure->reset) {
+			pwr |= BCSR_PCMCIA_PC0DRVEN;
+			bcsr->pcmcia = pwr;
+			au_sync_delay(300);
+			pwr |= BCSR_PCMCIA_PC0RST;
+			bcsr->pcmcia = pwr;
+			au_sync_delay(100);
+		}
+		else {
+			pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
+			bcsr->pcmcia = pwr;
+			au_sync_delay(100);
+		}
+	}
+	else {
+		if (!configure->reset) {
+			pwr |= BCSR_PCMCIA_PC1DRVEN;
+			bcsr->pcmcia = pwr;
+			au_sync_delay(300);
+			pwr |= BCSR_PCMCIA_PC1RST;
+			bcsr->pcmcia = pwr;
+			au_sync_delay(100);
+		}
+		else {
+			pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
+			bcsr->pcmcia = pwr;
+			au_sync_delay(100);
+		}
+	}
+	return 0;
+}
+
+struct pcmcia_low_level db1x00_pcmcia_ops = { 
+	db1x00_pcmcia_init,
+	db1x00_pcmcia_shutdown,
+	db1x00_pcmcia_socket_state,
+	db1x00_pcmcia_get_irq_info,
+	db1x00_pcmcia_configure_socket
+};

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)