patch-2.4.22 linux-2.4.22/include/asm-arm/arch-sa1100/adsagc.h

• Lines: 84
• Date: 2003-08-25 04:44:43.000000000 -0700
• Orig file: linux-2.4.21/include/asm-arm/arch-sa1100/adsagc.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/include/asm-arm/arch-sa1100/adsagc.h linux-2.4.22/include/asm-arm/arch-sa1100/adsagc.h
@@ -0,0 +1,83 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/adsagc.h
+ *
+ * Created Feb 7, 2003 by Robert Whaley <rwhaley@applieddata.net>
+ *
+ * This file comes from graphicsmaster.h of Woojung Huh <whuh@applieddata.net>
+ *
+ * This file contains the hardware specific definitions for the
+ * ADS Advanced Graphics Client
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define ADS_CPLD_BASE		(0x10000000)
+#define ADS_p2v( x )		((x) - ADS_CPLD_BASE + 0xf0000000)
+#define ADS_v2p( x )		((x) - 0xf0000000 + ADS_CPLD_BASE)
+
+
+#define _ADS_SW_SWITCHES	0x10060000	/* Software Switches */
+
+#define _ADS_CR1                0x10060004      /* audio and serial */
+#define _ADS_CR2                0x10060008      /* clocks */
+#define _ADS_CR3                0x1006000c      /* AVR, LCD, LEDs */
+
+#define ADS_CR1_AMP             0x01
+#define ADS_CR1_CODEC           0x02
+#define ADS_CR1_BTL             0x04
+#define ADS_CR1_AUDIO_RST       0x08
+#define ADS_CR1_COM3_ENA        0x10
+#define ADS_CR1_IRDA_ENA        0x20
+#define ADS_CR1_SPI_SEL         0x40
+#define ADS_CR1_ARM_RST         0x80
+
+#define ADS_CR2_CLK_SEL0        0x01
+#define ADS_CR2_CLK_SEL1        0x02
+#define ADS_CR2_PLL_OFF         0x04
+#define ADS_CR2_CLK_PWR         0x08
+
+#define ADS_CR3_PNLON           0x01
+#define ADS_CR3_VEECTL          0x02
+#define ADS_CR3_BLON            0x04
+#define ADS_CR3_WAKEUP          0x08
+
+
+/* Extra IRQ Controller */
+#define _ADS_INT_ST1		0x10080000	/* IRQ Status #1 */
+#define _ADS_INT_EN1		0x10080008	/* IRQ Enable #1 */
+#define _ADS_DCR			0x10080018	/* Discrete Control Reg */
+
+/* Discrete Controller (AVR:Atmel AT90LS8535) */
+#define _ADS_AVR_REG		0x10080018
+
+/* On-Board Ethernet */
+#define _ADS_ETHERNET		0x40000000	/* Ethernet */
+
+/* LEDs */
+#define ADS_LED0	0x10		/* on-board Green */
+#define ADS_LED1	0x20		/* on-board Yellow */
+#define ADS_LED2	0x40		/* on-board Red */
+
+/* DCR */
+#define DCR_AVR_RESET		0x01
+#define DCR_SA1111_RESET	0x02
+#define	DCR_BACKLITE_ON		0x04
+
+/* Virtual register addresses */
+
+#ifndef __ASSEMBLY__
+#define ADS_INT_ST1	(*((volatile u_char *) ADS_p2v(_ADS_INT_ST1)))
+#define ADS_INT_EN1	(*((volatile u_char *) ADS_p2v(_ADS_INT_EN1)))
+
+#define ADS_CR1  	(*((volatile u_char *) ADS_p2v(_ADS_CR1)))
+#define ADS_CR2  	(*((volatile u_char *) ADS_p2v(_ADS_CR2)))
+#define ADS_CR3  	(*((volatile u_char *) ADS_p2v(_ADS_CR3)))
+
+#define ADS_ETHERNET	((int) ADS_p2v(_ADS_ETHERNET))
+#define ADS_AVR_REG	(*((volatile u_char *) ADS_p2v(_ADS_AVR_REG)))
+#define ADS_DCR		(*((volatile u_char *) ADS_p2v(_ADS_DCR)))
+#endif
+
+#define ADS_SA1111_BASE		(0x18000000)