patch-2.4.22 linux-2.4.22/include/asm-ia64/sn/sn1/hubpi.h
Next file: linux-2.4.22/include/asm-ia64/sn/sn1/hubpi_next.h
Previous file: linux-2.4.22/include/asm-ia64/sn/sn1/hubni_next.h
Back to the patch index
Back to the overall index
- Lines: 4264
- Date:
1969-12-31 16:00:00.000000000 -0800
- Orig file:
linux-2.4.21/include/asm-ia64/sn/sn1/hubpi.h
- Orig date:
2003-06-13 07:51:38.000000000 -0700
diff -urN linux-2.4.21/include/asm-ia64/sn/sn1/hubpi.h linux-2.4.22/include/asm-ia64/sn/sn1/hubpi.h
@@ -1,4263 +0,0 @@
-/* $Id$
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2002 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_SN1_HUBPI_H
-#define _ASM_IA64_SN_SN1_HUBPI_H
-
-/************************************************************************
- * *
- * WARNING!!! WARNING!!! WARNING!!! WARNING!!! WARNING!!! *
- * *
- * This file is created by an automated script. Any (minimal) changes *
- * made manually to this file should be made with care. *
- * *
- * MAKE ALL ADDITIONS TO THE END OF THIS FILE *
- * *
- ************************************************************************/
-
-
-#define PI_CPU_PROTECT 0x00000000 /* CPU Protection */
-
-
-
-#define PI_PROT_OVRRD 0x00000008 /*
- * Clear CPU
- * Protection bit in
- * CPU_PROTECT
- */
-
-
-
-#define PI_IO_PROTECT 0x00000010 /*
- * Interrupt Pending
- * Protection for IO
- * access
- */
-
-
-
-#define PI_REGION_PRESENT 0x00000018 /* Region present */
-
-
-
-#define PI_CPU_NUM 0x00000020 /* CPU Number ID */
-
-
-
-#define PI_CALIAS_SIZE 0x00000028 /* Cached Alias Size */
-
-
-
-#define PI_MAX_CRB_TIMEOUT 0x00000030 /*
- * Maximum Timeout for
- * CRB
- */
-
-
-
-#define PI_CRB_SFACTOR 0x00000038 /*
- * Scale Factor for
- * CRB Timeout
- */
-
-
-
-#define PI_CPU_PRESENT_A 0x00000040 /*
- * CPU Present for
- * CPU_A
- */
-
-
-
-#define PI_CPU_PRESENT_B 0x00000048 /*
- * CPU Present for
- * CPU_B
- */
-
-
-
-#define PI_CPU_ENABLE_A 0x00000050 /*
- * CPU Enable for
- * CPU_A
- */
-
-
-
-#define PI_CPU_ENABLE_B 0x00000058 /*
- * CPU Enable for
- * CPU_B
- */
-
-
-
-#define PI_REPLY_LEVEL 0x00010060 /*
- * Reply FIFO Priority
- * Control
- */
-
-
-
-#define PI_GFX_CREDIT_MODE 0x00020068 /*
- * Graphics Credit
- * Mode
- */
-
-
-
-#define PI_NMI_A 0x00000070 /*
- * Non-maskable
- * Interrupt to CPU A
- */
-
-
-
-#define PI_NMI_B 0x00000078 /*
- * Non-maskable
- * Interrupt to CPU B
- */
-
-
-
-#define PI_INT_PEND_MOD 0x00000090 /*
- * Interrupt Pending
- * Modify
- */
-
-
-
-#define PI_INT_PEND0 0x00000098 /* Interrupt Pending 0 */
-
-
-
-#define PI_INT_PEND1 0x000000A0 /* Interrupt Pending 1 */
-
-
-
-#define PI_INT_MASK0_A 0x000000A8 /*
- * Interrupt Mask 0
- * for CPU A
- */
-
-
-
-#define PI_INT_MASK1_A 0x000000B0 /*
- * Interrupt Mask 1
- * for CPU A
- */
-
-
-
-#define PI_INT_MASK0_B 0x000000B8 /*
- * Interrupt Mask 0
- * for CPU B
- */
-
-
-
-#define PI_INT_MASK1_B 0x000000C0 /*
- * Interrupt Mask 1
- * for CPU B
- */
-
-
-
-#define PI_CC_PEND_SET_A 0x000000C8 /*
- * CC Interrupt
- * Pending for CPU A
- */
-
-
-
-#define PI_CC_PEND_SET_B 0x000000D0 /*
- * CC Interrupt
- * Pending for CPU B
- */
-
-
-
-#define PI_CC_PEND_CLR_A 0x000000D8 /*
- * CPU to CPU
- * Interrupt Pending
- * Clear for CPU A
- */
-
-
-
-#define PI_CC_PEND_CLR_B 0x000000E0 /*
- * CPU to CPU
- * Interrupt Pending
- * Clear for CPU B
- */
-
-
-
-#define PI_CC_MASK 0x000000E8 /*
- * Mask of both
- * CC_PENDs
- */
-
-
-
-#define PI_INT_PEND1_REMAP 0x000000F0 /*
- * Remap Interrupt
- * Pending
- */
-
-
-
-#define PI_RT_COUNTER 0x00030100 /* Real Time Counter */
-
-
-
-#define PI_RT_COMPARE_A 0x00000108 /* Real Time Compare A */
-
-
-
-#define PI_RT_COMPARE_B 0x00000110 /* Real Time Compare B */
-
-
-
-#define PI_PROFILE_COMPARE 0x00000118 /* Profiling Compare */
-
-
-
-#define PI_RT_INT_PEND_A 0x00000120 /*
- * RT interrupt
- * pending
- */
-
-
-
-#define PI_RT_INT_PEND_B 0x00000128 /*
- * RT interrupt
- * pending
- */
-
-
-
-#define PI_PROF_INT_PEND_A 0x00000130 /*
- * Profiling interrupt
- * pending
- */
-
-
-
-#define PI_PROF_INT_PEND_B 0x00000138 /*
- * Profiling interrupt
- * pending
- */
-
-
-
-#define PI_RT_INT_EN_A 0x00000140 /* RT Interrupt Enable */
-
-
-
-#define PI_RT_INT_EN_B 0x00000148 /* RT Interrupt Enable */
-
-
-
-#define PI_PROF_INT_EN_A 0x00000150 /*
- * Profiling Interrupt
- * Enable
- */
-
-
-
-#define PI_PROF_INT_EN_B 0x00000158 /*
- * Profiling Interrupt
- * Enable
- */
-
-
-
-#define PI_DEBUG_SEL 0x00000160 /* PI Debug Select */
-
-
-
-#define PI_INT_PEND_MOD_ALIAS 0x00000180 /*
- * Interrupt Pending
- * Modify
- */
-
-
-
-#define PI_PERF_CNTL_A 0x00040200 /*
- * Performance Counter
- * Control A
- */
-
-
-
-#define PI_PERF_CNTR0_A 0x00040208 /*
- * Performance Counter
- * 0 A
- */
-
-
-
-#define PI_PERF_CNTR1_A 0x00040210 /*
- * Performance Counter
- * 1 A
- */
-
-
-
-#define PI_PERF_CNTL_B 0x00050200 /*
- * Performance Counter
- * Control B
- */
-
-
-
-#define PI_PERF_CNTR0_B 0x00050208 /*
- * Performance Counter
- * 0 B
- */
-
-
-
-#define PI_PERF_CNTR1_B 0x00050210 /*
- * Performance Counter
- * 1 B
- */
-
-
-
-#define PI_GFX_PAGE_A 0x00000300 /* Graphics Page */
-
-
-
-#define PI_GFX_CREDIT_CNTR_A 0x00000308 /*
- * Graphics Credit
- * Counter
- */
-
-
-
-#define PI_GFX_BIAS_A 0x00000310 /* TRex+ BIAS */
-
-
-
-#define PI_GFX_INT_CNTR_A 0x00000318 /*
- * Graphics Interrupt
- * Counter
- */
-
-
-
-#define PI_GFX_INT_CMP_A 0x00000320 /*
- * Graphics Interrupt
- * Compare
- */
-
-
-
-#define PI_GFX_PAGE_B 0x00000328 /* Graphics Page */
-
-
-
-#define PI_GFX_CREDIT_CNTR_B 0x00000330 /*
- * Graphics Credit
- * Counter
- */
-
-
-
-#define PI_GFX_BIAS_B 0x00000338 /* TRex+ BIAS */
-
-
-
-#define PI_GFX_INT_CNTR_B 0x00000340 /*
- * Graphics Interrupt
- * Counter
- */
-
-
-
-#define PI_GFX_INT_CMP_B 0x00000348 /*
- * Graphics Interrupt
- * Compare
- */
-
-
-
-#define PI_ERR_INT_PEND_WR 0x000003F8 /*
- * Error Interrupt
- * Pending (Writable)
- */
-
-
-
-#define PI_ERR_INT_PEND 0x00000400 /*
- * Error Interrupt
- * Pending
- */
-
-
-
-#define PI_ERR_INT_MASK_A 0x00000408 /*
- * Error Interrupt
- * Mask CPU_A
- */
-
-
-
-#define PI_ERR_INT_MASK_B 0x00000410 /*
- * Error Interrupt
- * Mask CPU_B
- */
-
-
-
-#define PI_ERR_STACK_ADDR_A 0x00000418 /*
- * Error Stack Address
- * Pointer
- */
-
-
-
-#define PI_ERR_STACK_ADDR_B 0x00000420 /*
- * Error Stack Address
- * Pointer
- */
-
-
-
-#define PI_ERR_STACK_SIZE 0x00000428 /* Error Stack Size */
-
-
-
-#define PI_ERR_STATUS0_A 0x00000430 /* Error Status 0 */
-
-
-
-#define PI_ERR_STATUS0_A_CLR 0x00000438 /* Error Status 0 */
-
-
-
-#define PI_ERR_STATUS1_A 0x00000440 /* Error Status 1 */
-
-
-
-#define PI_ERR_STATUS1_A_CLR 0x00000448 /* Error Status 1 */
-
-
-
-#define PI_ERR_STATUS0_B 0x00000450 /* Error Status 0 */
-
-
-
-#define PI_ERR_STATUS0_B_CLR 0x00000458 /* Error Status 0 */
-
-
-
-#define PI_ERR_STATUS1_B 0x00000460 /* Error Status 1 */
-
-
-
-#define PI_ERR_STATUS1_B_CLR 0x00000468 /* Error Status 1 */
-
-
-
-#define PI_SPOOL_CMP_A 0x00000470 /* Spool Compare */
-
-
-
-#define PI_SPOOL_CMP_B 0x00000478 /* Spool Compare */
-
-
-
-#define PI_CRB_TIMEOUT_A 0x00000480 /*
- * CRB entries which
- * have timed out but
- * are still valid
- */
-
-
-
-#define PI_CRB_TIMEOUT_B 0x00000488 /*
- * CRB entries which
- * have timed out but
- * are still valid
- */
-
-
-
-#define PI_SYSAD_ERRCHK_EN 0x00000490 /*
- * enables
- * sysad/cmd/state
- * error checking
- */
-
-
-
-#define PI_FORCE_BAD_CHECK_BIT_A 0x00000498 /*
- * force SysAD Check
- * Bit error
- */
-
-
-
-#define PI_FORCE_BAD_CHECK_BIT_B 0x000004A0 /*
- * force SysAD Check
- * Bit error
- */
-
-
-
-#define PI_NACK_CNT_A 0x000004A8 /*
- * consecutive NACK
- * counter
- */
-
-
-
-#define PI_NACK_CNT_B 0x000004B0 /*
- * consecutive NACK
- * counter
- */
-
-
-
-#define PI_NACK_CMP 0x000004B8 /* NACK count compare */
-
-
-
-#define PI_SPOOL_MASK 0x000004C0 /* Spool error mask */
-
-
-
-#define PI_SPURIOUS_HDR_0 0x000004C8 /* Spurious Error 0 */
-
-
-
-#define PI_SPURIOUS_HDR_1 0x000004D0 /* Spurious Error 1 */
-
-
-
-#define PI_ERR_INJECT 0x000004D8 /*
- * SysAD bus error
- * injection
- */
-
-
-
-
-
-#ifndef __ASSEMBLY__
-
-/************************************************************************
- * *
- * Description: This read/write register determines on a *
- * bit-per-region basis whether incoming CPU-initiated PIO Read and *
- * Write to local PI registers are allowed. If access is allowed, the *
- * PI's response to a partial read is a PRPLY message, and the *
- * response to a partial write is a PACK message. If access is not *
- * allowed, the PI's response to a partial read is a PRERR message, *
- * and the response to a partial write is a PWERR message. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cpu_protect_u {
- bdrkreg_t pi_cpu_protect_regval;
- struct {
- bdrkreg_t cp_cpu_protect : 64;
- } pi_cpu_protect_fld_s;
-} pi_cpu_protect_u_t;
-
-
-
-
-/************************************************************************
- * *
- * A write with a special data pattern allows any CPU to set its *
- * region's bit in CPU_PROTECT. This register has data pattern *
- * protection. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_prot_ovrrd_u {
- bdrkreg_t pi_prot_ovrrd_regval;
- struct {
- bdrkreg_t po_prot_ovrrd : 64;
- } pi_prot_ovrrd_fld_s;
-} pi_prot_ovrrd_u_t;
-
-
-
-
-/************************************************************************
- * *
- * Description: This read/write register determines on a *
- * bit-per-region basis whether incoming IO-initiated interrupts are *
- * allowed to set bits in INT_PEND0 and INT_PEND1. If access is *
- * allowed, the PI's response to a partial read is a PRPLY message, *
- * and the response to a partial write is a PACK message. If access *
- * is not allowed, the PI's response to a partial read is a PRERR *
- * message, and the response to a partial write is a PWERR message. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_io_protect_u {
- bdrkreg_t pi_io_protect_regval;
- struct {
- bdrkreg_t ip_io_protect : 64;
- } pi_io_protect_fld_s;
-} pi_io_protect_u_t;
-
-
-
-
-/************************************************************************
- * *
- * Description: This read/write register determines on a *
- * bit-per-region basis whether read access from a local processor to *
- * the region is permissible. For example, setting a bit to 0 *
- * prevents speculative reads to that non-existent node. If a read *
- * request to a non-present region occurs, an ERR response is issued *
- * to the TRex+ (no PI error registers are modified). It is up to *
- * software to load this register with the proper contents. *
- * Region-present checking is only done for coherent read requests - *
- * partial reads/writes will be issued to a non-present region. The *
- * setting of these bits does not affect a node's access to its *
- * CALIAS space. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_region_present_u {
- bdrkreg_t pi_region_present_regval;
- struct {
- bdrkreg_t rp_region_present : 64;
- } pi_region_present_fld_s;
-} pi_region_present_u_t;
-
-
-
-
-/************************************************************************
- * *
- * A read to the location will allow a CPU to identify itself as *
- * either CPU_A or CPU_B, and will indicate whether the CPU is *
- * connected to PI 0 or PI 1. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_cpu_num_u {
- bdrkreg_t pi_cpu_num_regval;
- struct {
- bdrkreg_t cn_cpu_num : 1;
- bdrkreg_t cn_pi_id : 1;
- bdrkreg_t cn_rsvd : 62;
- } pi_cpu_num_fld_s;
-} pi_cpu_num_u_t;
-
-#else
-
-typedef union pi_cpu_num_u {
- bdrkreg_t pi_cpu_num_regval;
- struct {
- bdrkreg_t cn_rsvd : 62;
- bdrkreg_t cn_pi_id : 1;
- bdrkreg_t cn_cpu_num : 1;
- } pi_cpu_num_fld_s;
-} pi_cpu_num_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: This read/write location determines the size of the *
- * Calias Space. *
- * This register is not reset by a soft reset. *
- * NOTE: For predictable behavior, all Calias spaces in a system must *
- * be set to the same size. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_calias_size_u {
- bdrkreg_t pi_calias_size_regval;
- struct {
- bdrkreg_t cs_calias_size : 4;
- bdrkreg_t cs_rsvd : 60;
- } pi_calias_size_fld_s;
-} pi_calias_size_u_t;
-
-#else
-
-typedef union pi_calias_size_u {
- bdrkreg_t pi_calias_size_regval;
- struct {
- bdrkreg_t cs_rsvd : 60;
- bdrkreg_t cs_calias_size : 4;
- } pi_calias_size_fld_s;
-} pi_calias_size_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This Read/Write location determines at which value (increment) *
- * the CRB Timeout Counters cause a timeout error to occur. See *
- * Section 3.4.2.2, "Time-outs in RRB and WRB" in the *
- * Processor Interface chapter, volume 1 of this document for more *
- * details. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_max_crb_timeout_u {
- bdrkreg_t pi_max_crb_timeout_regval;
- struct {
- bdrkreg_t mct_max_timeout : 8;
- bdrkreg_t mct_rsvd : 56;
- } pi_max_crb_timeout_fld_s;
-} pi_max_crb_timeout_u_t;
-
-#else
-
-typedef union pi_max_crb_timeout_u {
- bdrkreg_t pi_max_crb_timeout_regval;
- struct {
- bdrkreg_t mct_rsvd : 56;
- bdrkreg_t mct_max_timeout : 8;
- } pi_max_crb_timeout_fld_s;
-} pi_max_crb_timeout_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This Read/Write location determines how often a valid CRB's *
- * Timeout Counter is incremented. See Section 3.4.2.2, *
- * "Time-outs in RRB and WRB" in the Processor Interface *
- * chapter, volume 1 of this document for more details. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_crb_sfactor_u {
- bdrkreg_t pi_crb_sfactor_regval;
- struct {
- bdrkreg_t cs_sfactor : 24;
- bdrkreg_t cs_rsvd : 40;
- } pi_crb_sfactor_fld_s;
-} pi_crb_sfactor_u_t;
-
-#else
-
-typedef union pi_crb_sfactor_u {
- bdrkreg_t pi_crb_sfactor_regval;
- struct {
- bdrkreg_t cs_rsvd : 40;
- bdrkreg_t cs_sfactor : 24;
- } pi_crb_sfactor_fld_s;
-} pi_crb_sfactor_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. The PI sets this *
- * bit when it sees the first transaction initiated by the associated *
- * CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_cpu_present_a_u {
- bdrkreg_t pi_cpu_present_a_regval;
- struct {
- bdrkreg_t cpa_cpu_present : 1;
- bdrkreg_t cpa_rsvd : 63;
- } pi_cpu_present_a_fld_s;
-} pi_cpu_present_a_u_t;
-
-#else
-
-typedef union pi_cpu_present_a_u {
- bdrkreg_t pi_cpu_present_a_regval;
- struct {
- bdrkreg_t cpa_rsvd : 63;
- bdrkreg_t cpa_cpu_present : 1;
- } pi_cpu_present_a_fld_s;
-} pi_cpu_present_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. The PI sets this *
- * bit when it sees the first transaction initiated by the associated *
- * CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_cpu_present_b_u {
- bdrkreg_t pi_cpu_present_b_regval;
- struct {
- bdrkreg_t cpb_cpu_present : 1;
- bdrkreg_t cpb_rsvd : 63;
- } pi_cpu_present_b_fld_s;
-} pi_cpu_present_b_u_t;
-
-#else
-
-typedef union pi_cpu_present_b_u {
- bdrkreg_t pi_cpu_present_b_regval;
- struct {
- bdrkreg_t cpb_rsvd : 63;
- bdrkreg_t cpb_cpu_present : 1;
- } pi_cpu_present_b_fld_s;
-} pi_cpu_present_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. This *
- * Read/Write location determines whether the associated CPU is *
- * enabled to issue external requests. When this bit is zero for a *
- * processor, the PI ignores SysReq_L from that processor, and so *
- * never grants it the bus. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_cpu_enable_a_u {
- bdrkreg_t pi_cpu_enable_a_regval;
- struct {
- bdrkreg_t cea_cpu_enable : 1;
- bdrkreg_t cea_rsvd : 63;
- } pi_cpu_enable_a_fld_s;
-} pi_cpu_enable_a_u_t;
-
-#else
-
-typedef union pi_cpu_enable_a_u {
- bdrkreg_t pi_cpu_enable_a_regval;
- struct {
- bdrkreg_t cea_rsvd : 63;
- bdrkreg_t cea_cpu_enable : 1;
- } pi_cpu_enable_a_fld_s;
-} pi_cpu_enable_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. This *
- * Read/Write location determines whether the associated CPU is *
- * enabled to issue external requests. When this bit is zero for a *
- * processor, the PI ignores SysReq_L from that processor, and so *
- * never grants it the bus. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_cpu_enable_b_u {
- bdrkreg_t pi_cpu_enable_b_regval;
- struct {
- bdrkreg_t ceb_cpu_enable : 1;
- bdrkreg_t ceb_rsvd : 63;
- } pi_cpu_enable_b_fld_s;
-} pi_cpu_enable_b_u_t;
-
-#else
-
-typedef union pi_cpu_enable_b_u {
- bdrkreg_t pi_cpu_enable_b_regval;
- struct {
- bdrkreg_t ceb_rsvd : 63;
- bdrkreg_t ceb_cpu_enable : 1;
- } pi_cpu_enable_b_fld_s;
-} pi_cpu_enable_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. A write to this *
- * location will cause an NMI to be issued to the CPU. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_nmi_a_u {
- bdrkreg_t pi_nmi_a_regval;
- struct {
- bdrkreg_t na_nmi_cpu : 64;
- } pi_nmi_a_fld_s;
-} pi_nmi_a_u_t;
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. A write to this *
- * location will cause an NMI to be issued to the CPU. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_nmi_b_u {
- bdrkreg_t pi_nmi_b_regval;
- struct {
- bdrkreg_t nb_nmi_cpu : 64;
- } pi_nmi_b_fld_s;
-} pi_nmi_b_u_t;
-
-
-
-
-/************************************************************************
- * *
- * A write to this register allows a single bit in the INT_PEND0 or *
- * INT_PEND1 registers to be set or cleared. If 6 is clear, a bit is *
- * modified in INT_PEND0, while if 6 is set, a bit is modified in *
- * INT_PEND1. The value in 5:0 (ranging from 63 to 0) will determine *
- * which bit in the register is effected. The value of 8 will *
- * determine whether the desired bit is set (8=1) or cleared (8=0). *
- * This is the only register which is accessible by IO issued PWRI *
- * command and is protected through the IO_PROTECT register. If the *
- * region bit in the IO_PROTECT is not set then a WERR reply is *
- * issued. CPU access is controlled through CPU_PROTECT. The contents *
- * of this register are masked with the contents of INT_MASK_A *
- * (INT_MASK_B) to determine whether an L2 interrupt is issued to *
- * CPU_A (CPU_B). *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_pend_mod_u {
- bdrkreg_t pi_int_pend_mod_regval;
- struct {
- bdrkreg_t ipm_bit_select : 6;
- bdrkreg_t ipm_reg_select : 1;
- bdrkreg_t ipm_rsvd_1 : 1;
- bdrkreg_t ipm_value : 1;
- bdrkreg_t ipm_rsvd : 55;
- } pi_int_pend_mod_fld_s;
-} pi_int_pend_mod_u_t;
-
-#else
-
-typedef union pi_int_pend_mod_u {
- bdrkreg_t pi_int_pend_mod_regval;
- struct {
- bdrkreg_t ipm_rsvd : 55;
- bdrkreg_t ipm_value : 1;
- bdrkreg_t ipm_rsvd_1 : 1;
- bdrkreg_t ipm_reg_select : 1;
- bdrkreg_t ipm_bit_select : 6;
- } pi_int_pend_mod_fld_s;
-} pi_int_pend_mod_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This read-only register provides information about interrupts *
- * that are currently pending. The interrupts in this register map to *
- * interrupt level 2 (L2). The GFX_INT_A/B bits are set by hardware *
- * but must be cleared by software. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_pend0_u {
- bdrkreg_t pi_int_pend0_regval;
- struct {
- bdrkreg_t ip_int_pend0_lo : 1;
- bdrkreg_t ip_gfx_int_a : 1;
- bdrkreg_t ip_gfx_int_b : 1;
- bdrkreg_t ip_page_migration : 1;
- bdrkreg_t ip_uart_ucntrl : 1;
- bdrkreg_t ip_or_cc_pend_a : 1;
- bdrkreg_t ip_or_cc_pend_b : 1;
- bdrkreg_t ip_int_pend0_hi : 57;
- } pi_int_pend0_fld_s;
-} pi_int_pend0_u_t;
-
-#else
-
-typedef union pi_int_pend0_u {
- bdrkreg_t pi_int_pend0_regval;
- struct {
- bdrkreg_t ip_int_pend0_hi : 57;
- bdrkreg_t ip_or_cc_pend_b : 1;
- bdrkreg_t ip_or_cc_pend_a : 1;
- bdrkreg_t ip_uart_ucntrl : 1;
- bdrkreg_t ip_page_migration : 1;
- bdrkreg_t ip_gfx_int_b : 1;
- bdrkreg_t ip_gfx_int_a : 1;
- bdrkreg_t ip_int_pend0_lo : 1;
- } pi_int_pend0_fld_s;
-} pi_int_pend0_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This read-only register provides information about interrupts *
- * that are currently pending. The interrupts in this register map to *
- * interrupt level 3 (L3), unless remapped by the INT_PEND1_REMAP *
- * register. The SYS_COR_ERR_A/B, RTC_DROP_OUT, and NACK_INT_A/B bits *
- * are set by hardware but must be cleared by software. The *
- * SYSTEM_SHUTDOWN, NI_ERROR, LB_ERROR and XB_ERROR bits just reflect *
- * the value of other logic, and cannot be changed by PI register *
- * writes. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_pend1_u {
- bdrkreg_t pi_int_pend1_regval;
- struct {
- bdrkreg_t ip_int_pend1 : 54;
- bdrkreg_t ip_xb_error : 1;
- bdrkreg_t ip_lb_error : 1;
- bdrkreg_t ip_nack_int_a : 1;
- bdrkreg_t ip_nack_int_b : 1;
- bdrkreg_t ip_perf_cntr_oflow : 1;
- bdrkreg_t ip_sys_cor_err_b : 1;
- bdrkreg_t ip_sys_cor_err_a : 1;
- bdrkreg_t ip_md_corr_error : 1;
- bdrkreg_t ip_ni_error : 1;
- bdrkreg_t ip_system_shutdown : 1;
- } pi_int_pend1_fld_s;
-} pi_int_pend1_u_t;
-
-#else
-
-typedef union pi_int_pend1_u {
- bdrkreg_t pi_int_pend1_regval;
- struct {
- bdrkreg_t ip_system_shutdown : 1;
- bdrkreg_t ip_ni_error : 1;
- bdrkreg_t ip_md_corr_error : 1;
- bdrkreg_t ip_sys_cor_err_a : 1;
- bdrkreg_t ip_sys_cor_err_b : 1;
- bdrkreg_t ip_perf_cntr_oflow : 1;
- bdrkreg_t ip_nack_int_b : 1;
- bdrkreg_t ip_nack_int_a : 1;
- bdrkreg_t ip_lb_error : 1;
- bdrkreg_t ip_xb_error : 1;
- bdrkreg_t ip_int_pend1 : 54;
- } pi_int_pend1_fld_s;
-} pi_int_pend1_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This read/write register masks the contents of INT_PEND0 to *
- * determine whether an L2 interrupt (bit 10 of the processor's Cause *
- * register) is sent to CPU_A if the same bit in the INT_PEND0 *
- * register is also set. Only one processor in a Bedrock should *
- * enable the PAGE_MIGRATION bit/interrupt. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_mask0_a_u {
- bdrkreg_t pi_int_mask0_a_regval;
- struct {
- bdrkreg_t ima_int_mask0_lo : 1;
- bdrkreg_t ima_gfx_int_a : 1;
- bdrkreg_t ima_gfx_int_b : 1;
- bdrkreg_t ima_page_migration : 1;
- bdrkreg_t ima_uart_ucntrl : 1;
- bdrkreg_t ima_or_ccp_mask_a : 1;
- bdrkreg_t ima_or_ccp_mask_b : 1;
- bdrkreg_t ima_int_mask0_hi : 57;
- } pi_int_mask0_a_fld_s;
-} pi_int_mask0_a_u_t;
-
-#else
-
-typedef union pi_int_mask0_a_u {
- bdrkreg_t pi_int_mask0_a_regval;
- struct {
- bdrkreg_t ima_int_mask0_hi : 57;
- bdrkreg_t ima_or_ccp_mask_b : 1;
- bdrkreg_t ima_or_ccp_mask_a : 1;
- bdrkreg_t ima_uart_ucntrl : 1;
- bdrkreg_t ima_page_migration : 1;
- bdrkreg_t ima_gfx_int_b : 1;
- bdrkreg_t ima_gfx_int_a : 1;
- bdrkreg_t ima_int_mask0_lo : 1;
- } pi_int_mask0_a_fld_s;
-} pi_int_mask0_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This read/write register masks the contents of INT_PEND1 to *
- * determine whether an interrupt should be sent. Bits 63:32 always *
- * generate an L3 interrupt (bit 11 of the processor's Cause *
- * register) is sent to CPU_A if the same bit in the INT_PEND1 *
- * register is set. Bits 31:0 can generate either an L3 or L2 *
- * interrupt, depending on the value of INT_PEND1_REMAP[3:0]. Only *
- * one processor in a Bedrock should enable the NI_ERROR, LB_ERROR, *
- * XB_ERROR and MD_CORR_ERROR bits. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_int_mask1_a_u {
- bdrkreg_t pi_int_mask1_a_regval;
- struct {
- bdrkreg_t ima_int_mask1 : 64;
- } pi_int_mask1_a_fld_s;
-} pi_int_mask1_a_u_t;
-
-
-
-
-/************************************************************************
- * *
- * This read/write register masks the contents of INT_PEND0 to *
- * determine whether an L2 interrupt (bit 10 of the processor's Cause *
- * register) is sent to CPU_B if the same bit in the INT_PEND0 *
- * register is also set. Only one processor in a Bedrock should *
- * enable the PAGE_MIGRATION bit/interrupt. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_mask0_b_u {
- bdrkreg_t pi_int_mask0_b_regval;
- struct {
- bdrkreg_t imb_int_mask0_lo : 1;
- bdrkreg_t imb_gfx_int_a : 1;
- bdrkreg_t imb_gfx_int_b : 1;
- bdrkreg_t imb_page_migration : 1;
- bdrkreg_t imb_uart_ucntrl : 1;
- bdrkreg_t imb_or_ccp_mask_a : 1;
- bdrkreg_t imb_or_ccp_mask_b : 1;
- bdrkreg_t imb_int_mask0_hi : 57;
- } pi_int_mask0_b_fld_s;
-} pi_int_mask0_b_u_t;
-
-#else
-
-typedef union pi_int_mask0_b_u {
- bdrkreg_t pi_int_mask0_b_regval;
- struct {
- bdrkreg_t imb_int_mask0_hi : 57;
- bdrkreg_t imb_or_ccp_mask_b : 1;
- bdrkreg_t imb_or_ccp_mask_a : 1;
- bdrkreg_t imb_uart_ucntrl : 1;
- bdrkreg_t imb_page_migration : 1;
- bdrkreg_t imb_gfx_int_b : 1;
- bdrkreg_t imb_gfx_int_a : 1;
- bdrkreg_t imb_int_mask0_lo : 1;
- } pi_int_mask0_b_fld_s;
-} pi_int_mask0_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This read/write register masks the contents of INT_PEND1 to *
- * determine whether an interrupt should be sent. Bits 63:32 always *
- * generate an L3 interrupt (bit 11 of the processor's Cause *
- * register) is sent to CPU_B if the same bit in the INT_PEND1 *
- * register is set. Bits 31:0 can generate either an L3 or L2 *
- * interrupt, depending on the value of INT_PEND1_REMAP[3:0]. Only *
- * one processor in a Bedrock should enable the NI_ERROR, LB_ERROR, *
- * XB_ERROR and MD_CORR_ERROR bits. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_int_mask1_b_u {
- bdrkreg_t pi_int_mask1_b_regval;
- struct {
- bdrkreg_t imb_int_mask1 : 64;
- } pi_int_mask1_b_fld_s;
-} pi_int_mask1_b_u_t;
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. These registers do *
- * not have access protection. A store to this location by a CPU will *
- * cause the bit corresponding to the source's region to be set in *
- * CC_PEND_A (or CC_PEND_B). The contents of CC_PEND_A (or CC_PEND_B) *
- * determines on a bit-per-region basis whether a CPU-to-CPU *
- * interrupt is pending CPU_A (or CPU_B). *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cc_pend_set_a_u {
- bdrkreg_t pi_cc_pend_set_a_regval;
- struct {
- bdrkreg_t cpsa_cc_pend : 64;
- } pi_cc_pend_set_a_fld_s;
-} pi_cc_pend_set_a_u_t;
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. These registers do *
- * not have access protection. A store to this location by a CPU will *
- * cause the bit corresponding to the source's region to be set in *
- * CC_PEND_A (or CC_PEND_B). The contents of CC_PEND_A (or CC_PEND_B) *
- * determines on a bit-per-region basis whether a CPU-to-CPU *
- * interrupt is pending CPU_A (or CPU_B). *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cc_pend_set_b_u {
- bdrkreg_t pi_cc_pend_set_b_regval;
- struct {
- bdrkreg_t cpsb_cc_pend : 64;
- } pi_cc_pend_set_b_fld_s;
-} pi_cc_pend_set_b_u_t;
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Reading this *
- * location will return the contents of CC_PEND_A (or CC_PEND_B). *
- * Writing this location will clear the bits corresponding to which *
- * data bits are driven high during the store; therefore, storing all *
- * ones would clear all bits. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cc_pend_clr_a_u {
- bdrkreg_t pi_cc_pend_clr_a_regval;
- struct {
- bdrkreg_t cpca_cc_pend : 64;
- } pi_cc_pend_clr_a_fld_s;
-} pi_cc_pend_clr_a_u_t;
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Reading this *
- * location will return the contents of CC_PEND_A (or CC_PEND_B). *
- * Writing this location will clear the bits corresponding to which *
- * data bits are driven high during the store; therefore, storing all *
- * ones would clear all bits. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cc_pend_clr_b_u {
- bdrkreg_t pi_cc_pend_clr_b_regval;
- struct {
- bdrkreg_t cpcb_cc_pend : 64;
- } pi_cc_pend_clr_b_fld_s;
-} pi_cc_pend_clr_b_u_t;
-
-
-
-
-/************************************************************************
- * *
- * This read/write register masks the contents of both CC_PEND_A and *
- * CC_PEND_B. *
- * *
- ************************************************************************/
-
-
-
-
-typedef union pi_cc_mask_u {
- bdrkreg_t pi_cc_mask_regval;
- struct {
- bdrkreg_t cm_cc_mask : 64;
- } pi_cc_mask_fld_s;
-} pi_cc_mask_u_t;
-
-
-
-
-/************************************************************************
- * *
- * This read/write register redirects INT_PEND1[31:0] from L3 to L2 *
- * interrupt level.Bit 4 in this register is used to enable error *
- * interrupt forwarding to the II. When this bit is set, if any of *
- * the three memory interrupts (correctable error, uncorrectable *
- * error, or page migration), or the NI, LB or XB error interrupts *
- * are set, the PI_II_ERROR_INT wire will be asserted. When this wire *
- * is asserted, the II will send an interrupt to the node specified *
- * in its IIDSR (Interrupt Destination Register). This allows these *
- * interrupts to be forwarded to another node. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_pend1_remap_u {
- bdrkreg_t pi_int_pend1_remap_regval;
- struct {
- bdrkreg_t ipr_remap_0 : 1;
- bdrkreg_t ipr_remap_1 : 1;
- bdrkreg_t ipr_remap_2 : 1;
- bdrkreg_t ipr_remap_3 : 1;
- bdrkreg_t ipr_error_forward : 1;
- bdrkreg_t ipr_reserved : 59;
- } pi_int_pend1_remap_fld_s;
-} pi_int_pend1_remap_u_t;
-
-#else
-
-typedef union pi_int_pend1_remap_u {
- bdrkreg_t pi_int_pend1_remap_regval;
- struct {
- bdrkreg_t ipr_reserved : 59;
- bdrkreg_t ipr_error_forward : 1;
- bdrkreg_t ipr_remap_3 : 1;
- bdrkreg_t ipr_remap_2 : 1;
- bdrkreg_t ipr_remap_1 : 1;
- bdrkreg_t ipr_remap_0 : 1;
- } pi_int_pend1_remap_fld_s;
-} pi_int_pend1_remap_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When the real time *
- * counter (RT_Counter) is equal to the value in this register, the *
- * RT_INT_PEND register is set, which causes a Level-4 interrupt to *
- * be sent to the processor. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_compare_a_u {
- bdrkreg_t pi_rt_compare_a_regval;
- struct {
- bdrkreg_t rca_rt_compare : 55;
- bdrkreg_t rca_rsvd : 9;
- } pi_rt_compare_a_fld_s;
-} pi_rt_compare_a_u_t;
-
-#else
-
-typedef union pi_rt_compare_a_u {
- bdrkreg_t pi_rt_compare_a_regval;
- struct {
- bdrkreg_t rca_rsvd : 9;
- bdrkreg_t rca_rt_compare : 55;
- } pi_rt_compare_a_fld_s;
-} pi_rt_compare_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When the real time *
- * counter (RT_Counter) is equal to the value in this register, the *
- * RT_INT_PEND register is set, which causes a Level-4 interrupt to *
- * be sent to the processor. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_compare_b_u {
- bdrkreg_t pi_rt_compare_b_regval;
- struct {
- bdrkreg_t rcb_rt_compare : 55;
- bdrkreg_t rcb_rsvd : 9;
- } pi_rt_compare_b_fld_s;
-} pi_rt_compare_b_u_t;
-
-#else
-
-typedef union pi_rt_compare_b_u {
- bdrkreg_t pi_rt_compare_b_regval;
- struct {
- bdrkreg_t rcb_rsvd : 9;
- bdrkreg_t rcb_rt_compare : 55;
- } pi_rt_compare_b_fld_s;
-} pi_rt_compare_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * When the least significant 32 bits of the real time counter *
- * (RT_Counter) are equal to the value in this register, the *
- * PROF_INT_PEND_A and PROF_INT_PEND_B registers are set to 0x1. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_profile_compare_u {
- bdrkreg_t pi_profile_compare_regval;
- struct {
- bdrkreg_t pc_profile_compare : 32;
- bdrkreg_t pc_rsvd : 32;
- } pi_profile_compare_fld_s;
-} pi_profile_compare_u_t;
-
-#else
-
-typedef union pi_profile_compare_u {
- bdrkreg_t pi_profile_compare_regval;
- struct {
- bdrkreg_t pc_rsvd : 32;
- bdrkreg_t pc_profile_compare : 32;
- } pi_profile_compare_fld_s;
-} pi_profile_compare_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. If the bit in the *
- * corresponding RT_INT_EN_A/B register is set, the processor's level *
- * 5 interrupt is set to the value of the RTC_INT_PEND bit in this *
- * register. Storing any value to this location will clear the *
- * RTC_INT_PEND bit in the register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_int_pend_a_u {
- bdrkreg_t pi_rt_int_pend_a_regval;
- struct {
- bdrkreg_t ripa_rtc_int_pend : 1;
- bdrkreg_t ripa_rsvd : 63;
- } pi_rt_int_pend_a_fld_s;
-} pi_rt_int_pend_a_u_t;
-
-#else
-
-typedef union pi_rt_int_pend_a_u {
- bdrkreg_t pi_rt_int_pend_a_regval;
- struct {
- bdrkreg_t ripa_rsvd : 63;
- bdrkreg_t ripa_rtc_int_pend : 1;
- } pi_rt_int_pend_a_fld_s;
-} pi_rt_int_pend_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. If the bit in the *
- * corresponding RT_INT_EN_A/B register is set, the processor's level *
- * 5 interrupt is set to the value of the RTC_INT_PEND bit in this *
- * register. Storing any value to this location will clear the *
- * RTC_INT_PEND bit in the register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_int_pend_b_u {
- bdrkreg_t pi_rt_int_pend_b_regval;
- struct {
- bdrkreg_t ripb_rtc_int_pend : 1;
- bdrkreg_t ripb_rsvd : 63;
- } pi_rt_int_pend_b_fld_s;
-} pi_rt_int_pend_b_u_t;
-
-#else
-
-typedef union pi_rt_int_pend_b_u {
- bdrkreg_t pi_rt_int_pend_b_regval;
- struct {
- bdrkreg_t ripb_rsvd : 63;
- bdrkreg_t ripb_rtc_int_pend : 1;
- } pi_rt_int_pend_b_fld_s;
-} pi_rt_int_pend_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Both registers are *
- * set when the PROFILE_COMPARE register is equal to bits [31:0] of *
- * the RT_Counter. If the bit in the corresponding PROF_INT_EN_A/B *
- * register is set, the processor's level 5 interrupt is set to the *
- * value of the PROF_INT_PEND bit in this register. Storing any value *
- * to this location will clear the PROF_INT_PEND bit in the register. *
- * The reason for having A and B versions of this register is that *
- * they need to be cleared independently. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_prof_int_pend_a_u {
- bdrkreg_t pi_prof_int_pend_a_regval;
- struct {
- bdrkreg_t pipa_prof_int_pend : 1;
- bdrkreg_t pipa_rsvd : 63;
- } pi_prof_int_pend_a_fld_s;
-} pi_prof_int_pend_a_u_t;
-
-#else
-
-typedef union pi_prof_int_pend_a_u {
- bdrkreg_t pi_prof_int_pend_a_regval;
- struct {
- bdrkreg_t pipa_rsvd : 63;
- bdrkreg_t pipa_prof_int_pend : 1;
- } pi_prof_int_pend_a_fld_s;
-} pi_prof_int_pend_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Both registers are *
- * set when the PROFILE_COMPARE register is equal to bits [31:0] of *
- * the RT_Counter. If the bit in the corresponding PROF_INT_EN_A/B *
- * register is set, the processor's level 5 interrupt is set to the *
- * value of the PROF_INT_PEND bit in this register. Storing any value *
- * to this location will clear the PROF_INT_PEND bit in the register. *
- * The reason for having A and B versions of this register is that *
- * they need to be cleared independently. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_prof_int_pend_b_u {
- bdrkreg_t pi_prof_int_pend_b_regval;
- struct {
- bdrkreg_t pipb_prof_int_pend : 1;
- bdrkreg_t pipb_rsvd : 63;
- } pi_prof_int_pend_b_fld_s;
-} pi_prof_int_pend_b_u_t;
-
-#else
-
-typedef union pi_prof_int_pend_b_u {
- bdrkreg_t pi_prof_int_pend_b_regval;
- struct {
- bdrkreg_t pipb_rsvd : 63;
- bdrkreg_t pipb_prof_int_pend : 1;
- } pi_prof_int_pend_b_fld_s;
-} pi_prof_int_pend_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Enables RTC *
- * interrupt to the associated CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_int_en_a_u {
- bdrkreg_t pi_rt_int_en_a_regval;
- struct {
- bdrkreg_t riea_rtc_int_en : 1;
- bdrkreg_t riea_rsvd : 63;
- } pi_rt_int_en_a_fld_s;
-} pi_rt_int_en_a_u_t;
-
-#else
-
-typedef union pi_rt_int_en_a_u {
- bdrkreg_t pi_rt_int_en_a_regval;
- struct {
- bdrkreg_t riea_rsvd : 63;
- bdrkreg_t riea_rtc_int_en : 1;
- } pi_rt_int_en_a_fld_s;
-} pi_rt_int_en_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Enables RTC *
- * interrupt to the associated CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_int_en_b_u {
- bdrkreg_t pi_rt_int_en_b_regval;
- struct {
- bdrkreg_t rieb_rtc_int_en : 1;
- bdrkreg_t rieb_rsvd : 63;
- } pi_rt_int_en_b_fld_s;
-} pi_rt_int_en_b_u_t;
-
-#else
-
-typedef union pi_rt_int_en_b_u {
- bdrkreg_t pi_rt_int_en_b_regval;
- struct {
- bdrkreg_t rieb_rsvd : 63;
- bdrkreg_t rieb_rtc_int_en : 1;
- } pi_rt_int_en_b_fld_s;
-} pi_rt_int_en_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Enables profiling *
- * interrupt to the associated CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_prof_int_en_a_u {
- bdrkreg_t pi_prof_int_en_a_regval;
- struct {
- bdrkreg_t piea_prof_int_en : 1;
- bdrkreg_t piea_rsvd : 63;
- } pi_prof_int_en_a_fld_s;
-} pi_prof_int_en_a_u_t;
-
-#else
-
-typedef union pi_prof_int_en_a_u {
- bdrkreg_t pi_prof_int_en_a_regval;
- struct {
- bdrkreg_t piea_rsvd : 63;
- bdrkreg_t piea_prof_int_en : 1;
- } pi_prof_int_en_a_fld_s;
-} pi_prof_int_en_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. Enables profiling *
- * interrupt to the associated CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_prof_int_en_b_u {
- bdrkreg_t pi_prof_int_en_b_regval;
- struct {
- bdrkreg_t pieb_prof_int_en : 1;
- bdrkreg_t pieb_rsvd : 63;
- } pi_prof_int_en_b_fld_s;
-} pi_prof_int_en_b_u_t;
-
-#else
-
-typedef union pi_prof_int_en_b_u {
- bdrkreg_t pi_prof_int_en_b_regval;
- struct {
- bdrkreg_t pieb_rsvd : 63;
- bdrkreg_t pieb_prof_int_en : 1;
- } pi_prof_int_en_b_fld_s;
-} pi_prof_int_en_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register controls operation of the debug data from the PI, *
- * along with Debug_Sel[2:0] from the Debug module. For some values *
- * of Debug_Sel[2:0], the B_SEL bit selects whether the debug bits *
- * are looking at the processor A or processor B logic. The remaining *
- * bits select which signal(s) are ORed to create DebugData bits 31 *
- * and 30 for all of the PI debug selections. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_debug_sel_u {
- bdrkreg_t pi_debug_sel_regval;
- struct {
- bdrkreg_t ds_low_t5cc_a : 1;
- bdrkreg_t ds_low_t5cc_b : 1;
- bdrkreg_t ds_low_totcc_a : 1;
- bdrkreg_t ds_low_totcc_b : 1;
- bdrkreg_t ds_low_reqcc_a : 1;
- bdrkreg_t ds_low_reqcc_b : 1;
- bdrkreg_t ds_low_rplcc_a : 1;
- bdrkreg_t ds_low_rplcc_b : 1;
- bdrkreg_t ds_low_intcc : 1;
- bdrkreg_t ds_low_perf_inc_a_0 : 1;
- bdrkreg_t ds_low_perf_inc_a_1 : 1;
- bdrkreg_t ds_low_perf_inc_b_0 : 1;
- bdrkreg_t ds_low_perf_inc_b_1 : 1;
- bdrkreg_t ds_high_t5cc_a : 1;
- bdrkreg_t ds_high_t5cc_b : 1;
- bdrkreg_t ds_high_totcc_a : 1;
- bdrkreg_t ds_high_totcc_b : 1;
- bdrkreg_t ds_high_reqcc_a : 1;
- bdrkreg_t ds_high_reqcc_b : 1;
- bdrkreg_t ds_high_rplcc_a : 1;
- bdrkreg_t ds_high_rplcc_b : 1;
- bdrkreg_t ds_high_intcc : 1;
- bdrkreg_t ds_high_perf_inc_a_0 : 1;
- bdrkreg_t ds_high_perf_inc_a_1 : 1;
- bdrkreg_t ds_high_perf_inc_b_0 : 1;
- bdrkreg_t ds_high_perf_inc_b_1 : 1;
- bdrkreg_t ds_b_sel : 1;
- bdrkreg_t ds_rsvd : 37;
- } pi_debug_sel_fld_s;
-} pi_debug_sel_u_t;
-
-#else
-
-typedef union pi_debug_sel_u {
- bdrkreg_t pi_debug_sel_regval;
- struct {
- bdrkreg_t ds_rsvd : 37;
- bdrkreg_t ds_b_sel : 1;
- bdrkreg_t ds_high_perf_inc_b_1 : 1;
- bdrkreg_t ds_high_perf_inc_b_0 : 1;
- bdrkreg_t ds_high_perf_inc_a_1 : 1;
- bdrkreg_t ds_high_perf_inc_a_0 : 1;
- bdrkreg_t ds_high_intcc : 1;
- bdrkreg_t ds_high_rplcc_b : 1;
- bdrkreg_t ds_high_rplcc_a : 1;
- bdrkreg_t ds_high_reqcc_b : 1;
- bdrkreg_t ds_high_reqcc_a : 1;
- bdrkreg_t ds_high_totcc_b : 1;
- bdrkreg_t ds_high_totcc_a : 1;
- bdrkreg_t ds_high_t5cc_b : 1;
- bdrkreg_t ds_high_t5cc_a : 1;
- bdrkreg_t ds_low_perf_inc_b_1 : 1;
- bdrkreg_t ds_low_perf_inc_b_0 : 1;
- bdrkreg_t ds_low_perf_inc_a_1 : 1;
- bdrkreg_t ds_low_perf_inc_a_0 : 1;
- bdrkreg_t ds_low_intcc : 1;
- bdrkreg_t ds_low_rplcc_b : 1;
- bdrkreg_t ds_low_rplcc_a : 1;
- bdrkreg_t ds_low_reqcc_b : 1;
- bdrkreg_t ds_low_reqcc_a : 1;
- bdrkreg_t ds_low_totcc_b : 1;
- bdrkreg_t ds_low_totcc_a : 1;
- bdrkreg_t ds_low_t5cc_b : 1;
- bdrkreg_t ds_low_t5cc_a : 1;
- } pi_debug_sel_fld_s;
-} pi_debug_sel_u_t;
-
-#endif
-
-
-/************************************************************************
- * *
- * A write to this register allows a single bit in the INT_PEND0 or *
- * INT_PEND1 registers to be set or cleared. If 6 is clear, a bit is *
- * modified in INT_PEND0, while if 6 is set, a bit is modified in *
- * INT_PEND1. The value in 5:0 (ranging from 63 to 0) will determine *
- * which bit in the register is effected. The value of 8 will *
- * determine whether the desired bit is set (8=1) or cleared (8=0). *
- * This is the only register which is accessible by IO issued PWRI *
- * command and is protected through the IO_PROTECT register. If the *
- * region bit in the IO_PROTECT is not set then a WERR reply is *
- * issued. CPU access is controlled through CPU_PROTECT. The contents *
- * of this register are masked with the contents of INT_MASK_A *
- * (INT_MASK_B) to determine whether an L2 interrupt is issued to *
- * CPU_A (CPU_B). *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_int_pend_mod_alias_u {
- bdrkreg_t pi_int_pend_mod_alias_regval;
- struct {
- bdrkreg_t ipma_bit_select : 6;
- bdrkreg_t ipma_reg_select : 1;
- bdrkreg_t ipma_rsvd_1 : 1;
- bdrkreg_t ipma_value : 1;
- bdrkreg_t ipma_rsvd : 55;
- } pi_int_pend_mod_alias_fld_s;
-} pi_int_pend_mod_alias_u_t;
-
-#else
-
-typedef union pi_int_pend_mod_alias_u {
- bdrkreg_t pi_int_pend_mod_alias_regval;
- struct {
- bdrkreg_t ipma_rsvd : 55;
- bdrkreg_t ipma_value : 1;
- bdrkreg_t ipma_rsvd_1 : 1;
- bdrkreg_t ipma_reg_select : 1;
- bdrkreg_t ipma_bit_select : 6;
- } pi_int_pend_mod_alias_fld_s;
-} pi_int_pend_mod_alias_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This register *
- * specifies the value of the Graphics Page. Uncached writes into the *
- * Graphics Page (with uncached attribute of IO) are done with GFXWS *
- * commands rather than the normal PWRI commands. GFXWS commands are *
- * tracked with the graphics credit counters. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_page_a_u {
- bdrkreg_t pi_gfx_page_a_regval;
- struct {
- bdrkreg_t gpa_rsvd_1 : 17;
- bdrkreg_t gpa_gfx_page_addr : 23;
- bdrkreg_t gpa_en_gfx_page : 1;
- bdrkreg_t gpa_rsvd : 23;
- } pi_gfx_page_a_fld_s;
-} pi_gfx_page_a_u_t;
-
-#else
-
-typedef union pi_gfx_page_a_u {
- bdrkreg_t pi_gfx_page_a_regval;
- struct {
- bdrkreg_t gpa_rsvd : 23;
- bdrkreg_t gpa_en_gfx_page : 1;
- bdrkreg_t gpa_gfx_page_addr : 23;
- bdrkreg_t gpa_rsvd_1 : 17;
- } pi_gfx_page_a_fld_s;
-} pi_gfx_page_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This register *
- * counts graphics credits. This counter is decremented for each *
- * doubleword sent to graphics with GFXWS or GFXWL commands. It is *
- * incremented for each doubleword acknowledge from graphics. When *
- * this counter has a smaller value than the GFX_BIAS register, *
- * SysWrRdy_L is deasserted, an interrupt is sent to the processor, *
- * and SysWrRdy_L is allowed to be asserted again. This is the basic *
- * mechanism for flow-controlling graphics writes. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_credit_cntr_a_u {
- bdrkreg_t pi_gfx_credit_cntr_a_regval;
- struct {
- bdrkreg_t gcca_gfx_credit_cntr : 12;
- bdrkreg_t gcca_rsvd : 52;
- } pi_gfx_credit_cntr_a_fld_s;
-} pi_gfx_credit_cntr_a_u_t;
-
-#else
-
-typedef union pi_gfx_credit_cntr_a_u {
- bdrkreg_t pi_gfx_credit_cntr_a_regval;
- struct {
- bdrkreg_t gcca_rsvd : 52;
- bdrkreg_t gcca_gfx_credit_cntr : 12;
- } pi_gfx_credit_cntr_a_fld_s;
-} pi_gfx_credit_cntr_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When the graphics *
- * credit counter is less than or equal to this value, a flow control *
- * interrupt is sent. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_bias_a_u {
- bdrkreg_t pi_gfx_bias_a_regval;
- struct {
- bdrkreg_t gba_gfx_bias : 12;
- bdrkreg_t gba_rsvd : 52;
- } pi_gfx_bias_a_fld_s;
-} pi_gfx_bias_a_u_t;
-
-#else
-
-typedef union pi_gfx_bias_a_u {
- bdrkreg_t pi_gfx_bias_a_regval;
- struct {
- bdrkreg_t gba_rsvd : 52;
- bdrkreg_t gba_gfx_bias : 12;
- } pi_gfx_bias_a_fld_s;
-} pi_gfx_bias_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. When *
- * this counter reaches the value of the GFX_INT_CMP register, an *
- * interrupt is sent to the associated processor. At each clock *
- * cycle, the value in this register can be changed by any one of the *
- * following actions: *
- * - Written by software. *
- * - Loaded with the value of GFX_INT_CMP, when an interrupt, NMI, or *
- * soft reset occurs, thus preventing an additional interrupt. *
- * - Zeroed, when the GFX_CREDIT_CNTR rises above the bias value. *
- * - Incremented (by one at each clock) for each clock that the *
- * GFX_CREDIT_CNTR is less than or equal to zero. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_int_cntr_a_u {
- bdrkreg_t pi_gfx_int_cntr_a_regval;
- struct {
- bdrkreg_t gica_gfx_int_cntr : 26;
- bdrkreg_t gica_rsvd : 38;
- } pi_gfx_int_cntr_a_fld_s;
-} pi_gfx_int_cntr_a_u_t;
-
-#else
-
-typedef union pi_gfx_int_cntr_a_u {
- bdrkreg_t pi_gfx_int_cntr_a_regval;
- struct {
- bdrkreg_t gica_rsvd : 38;
- bdrkreg_t gica_gfx_int_cntr : 26;
- } pi_gfx_int_cntr_a_fld_s;
-} pi_gfx_int_cntr_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. The value in this *
- * register is loaded into the GFX_INT_CNTR register when an *
- * interrupt, NMI, or soft reset is sent to the processor. The value *
- * in this register is compared to the value of GFX_INT_CNTR and an *
- * interrupt is sent when they become equal. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LINUX
-
-typedef union pi_gfx_int_cmp_a_u {
- bdrkreg_t pi_gfx_int_cmp_a_regval;
- struct {
- bdrkreg_t gica_gfx_int_cmp : 26;
- bdrkreg_t gica_rsvd : 38;
- } pi_gfx_int_cmp_a_fld_s;
-} pi_gfx_int_cmp_a_u_t;
-
-#else
-
-typedef union pi_gfx_int_cmp_a_u {
- bdrkreg_t pi_gfx_int_cmp_a_regval;
- struct {
- bdrkreg_t gica_rsvd : 38;
- bdrkreg_t gica_gfx_int_cmp : 26;
- } pi_gfx_int_cmp_a_fld_s;
-} pi_gfx_int_cmp_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This register *
- * specifies the value of the Graphics Page. Uncached writes into the *
- * Graphics Page (with uncached attribute of IO) are done with GFXWS *
- * commands rather than the normal PWRI commands. GFXWS commands are *
- * tracked with the graphics credit counters. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_page_b_u {
- bdrkreg_t pi_gfx_page_b_regval;
- struct {
- bdrkreg_t gpb_rsvd_1 : 17;
- bdrkreg_t gpb_gfx_page_addr : 23;
- bdrkreg_t gpb_en_gfx_page : 1;
- bdrkreg_t gpb_rsvd : 23;
- } pi_gfx_page_b_fld_s;
-} pi_gfx_page_b_u_t;
-
-#else
-
-typedef union pi_gfx_page_b_u {
- bdrkreg_t pi_gfx_page_b_regval;
- struct {
- bdrkreg_t gpb_rsvd : 23;
- bdrkreg_t gpb_en_gfx_page : 1;
- bdrkreg_t gpb_gfx_page_addr : 23;
- bdrkreg_t gpb_rsvd_1 : 17;
- } pi_gfx_page_b_fld_s;
-} pi_gfx_page_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This register *
- * counts graphics credits. This counter is decremented for each *
- * doubleword sent to graphics with GFXWS or GFXWL commands. It is *
- * incremented for each doubleword acknowledge from graphics. When *
- * this counter has a smaller value than the GFX_BIAS register, *
- * SysWrRdy_L is deasserted, an interrupt is sent to the processor, *
- * and SysWrRdy_L is allowed to be asserted again. This is the basic *
- * mechanism for flow-controlling graphics writes. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_credit_cntr_b_u {
- bdrkreg_t pi_gfx_credit_cntr_b_regval;
- struct {
- bdrkreg_t gccb_gfx_credit_cntr : 12;
- bdrkreg_t gccb_rsvd : 52;
- } pi_gfx_credit_cntr_b_fld_s;
-} pi_gfx_credit_cntr_b_u_t;
-
-#else
-
-typedef union pi_gfx_credit_cntr_b_u {
- bdrkreg_t pi_gfx_credit_cntr_b_regval;
- struct {
- bdrkreg_t gccb_rsvd : 52;
- bdrkreg_t gccb_gfx_credit_cntr : 12;
- } pi_gfx_credit_cntr_b_fld_s;
-} pi_gfx_credit_cntr_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When the graphics *
- * credit counter is less than or equal to this value, a flow control *
- * interrupt is sent. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_bias_b_u {
- bdrkreg_t pi_gfx_bias_b_regval;
- struct {
- bdrkreg_t gbb_gfx_bias : 12;
- bdrkreg_t gbb_rsvd : 52;
- } pi_gfx_bias_b_fld_s;
-} pi_gfx_bias_b_u_t;
-
-#else
-
-typedef union pi_gfx_bias_b_u {
- bdrkreg_t pi_gfx_bias_b_regval;
- struct {
- bdrkreg_t gbb_rsvd : 52;
- bdrkreg_t gbb_gfx_bias : 12;
- } pi_gfx_bias_b_fld_s;
-} pi_gfx_bias_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. When *
- * this counter reaches the value of the GFX_INT_CMP register, an *
- * interrupt is sent to the associated processor. At each clock *
- * cycle, the value in this register can be changed by any one of the *
- * following actions: *
- * - Written by software. *
- * - Loaded with the value of GFX_INT_CMP, when an interrupt, NMI, or *
- * soft reset occurs, thus preventing an additional interrupt. *
- * - Zeroed, when the GFX_CREDIT_CNTR rises above the bias value. *
- * - Incremented (by one at each clock) for each clock that the *
- * GFX_CREDIT_CNTR is less than or equal to zero. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_int_cntr_b_u {
- bdrkreg_t pi_gfx_int_cntr_b_regval;
- struct {
- bdrkreg_t gicb_gfx_int_cntr : 26;
- bdrkreg_t gicb_rsvd : 38;
- } pi_gfx_int_cntr_b_fld_s;
-} pi_gfx_int_cntr_b_u_t;
-
-#else
-
-typedef union pi_gfx_int_cntr_b_u {
- bdrkreg_t pi_gfx_int_cntr_b_regval;
- struct {
- bdrkreg_t gicb_rsvd : 38;
- bdrkreg_t gicb_gfx_int_cntr : 26;
- } pi_gfx_int_cntr_b_fld_s;
-} pi_gfx_int_cntr_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. The value in this *
- * register is loaded into the GFX_INT_CNTR register when an *
- * interrupt, NMI, or soft reset is sent to the processor. The value *
- * in this register is compared to the value of GFX_INT_CNTR and an *
- * interrupt is sent when they become equal. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_int_cmp_b_u {
- bdrkreg_t pi_gfx_int_cmp_b_regval;
- struct {
- bdrkreg_t gicb_gfx_int_cmp : 26;
- bdrkreg_t gicb_rsvd : 38;
- } pi_gfx_int_cmp_b_fld_s;
-} pi_gfx_int_cmp_b_u_t;
-
-#else
-
-typedef union pi_gfx_int_cmp_b_u {
- bdrkreg_t pi_gfx_int_cmp_b_regval;
- struct {
- bdrkreg_t gicb_rsvd : 38;
- bdrkreg_t gicb_gfx_int_cmp : 26;
- } pi_gfx_int_cmp_b_fld_s;
-} pi_gfx_int_cmp_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: A read of this register returns all sources of *
- * Bedrock Error Interrupts. Storing to the write-with-clear location *
- * clears any bit for which a one appears on the data bus. Storing to *
- * the writable location does a direct write to all unreserved bits *
- * (except for MEM_UNC). *
- * In Synergy mode, the processor that is the source of the command *
- * that got an error is independent of the A or B SysAD bus. So in *
- * Synergy mode, Synergy provides the source processor number in bit *
- * 52 of the SysAD bus in all commands. The PI saves this in the RRB *
- * or WRB entry, and uses that value to determine which error bit (A *
- * or B) to set, as well as which ERR_STATUS and spool registers to *
- * use, for all error types in this register that are specified as an *
- * error to CPU_A or CPU_B. *
- * This register is not cleared at reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_int_pend_wr_u {
- bdrkreg_t pi_err_int_pend_wr_regval;
- struct {
- bdrkreg_t eipw_spool_comp_b : 1;
- bdrkreg_t eipw_spool_comp_a : 1;
- bdrkreg_t eipw_spurious_b : 1;
- bdrkreg_t eipw_spurious_a : 1;
- bdrkreg_t eipw_wrb_terr_b : 1;
- bdrkreg_t eipw_wrb_terr_a : 1;
- bdrkreg_t eipw_wrb_werr_b : 1;
- bdrkreg_t eipw_wrb_werr_a : 1;
- bdrkreg_t eipw_sysstate_par_b : 1;
- bdrkreg_t eipw_sysstate_par_a : 1;
- bdrkreg_t eipw_sysad_data_ecc_b : 1;
- bdrkreg_t eipw_sysad_data_ecc_a : 1;
- bdrkreg_t eipw_sysad_addr_ecc_b : 1;
- bdrkreg_t eipw_sysad_addr_ecc_a : 1;
- bdrkreg_t eipw_syscmd_data_par_b : 1;
- bdrkreg_t eipw_syscmd_data_par_a : 1;
- bdrkreg_t eipw_syscmd_addr_par_b : 1;
- bdrkreg_t eipw_syscmd_addr_par_a : 1;
- bdrkreg_t eipw_spool_err_b : 1;
- bdrkreg_t eipw_spool_err_a : 1;
- bdrkreg_t eipw_ue_uncached_b : 1;
- bdrkreg_t eipw_ue_uncached_a : 1;
- bdrkreg_t eipw_sysstate_tag_b : 1;
- bdrkreg_t eipw_sysstate_tag_a : 1;
- bdrkreg_t eipw_mem_unc : 1;
- bdrkreg_t eipw_sysad_bad_data_b : 1;
- bdrkreg_t eipw_sysad_bad_data_a : 1;
- bdrkreg_t eipw_ue_cached_b : 1;
- bdrkreg_t eipw_ue_cached_a : 1;
- bdrkreg_t eipw_pkt_len_err_b : 1;
- bdrkreg_t eipw_pkt_len_err_a : 1;
- bdrkreg_t eipw_irb_err_b : 1;
- bdrkreg_t eipw_irb_err_a : 1;
- bdrkreg_t eipw_irb_timeout_b : 1;
- bdrkreg_t eipw_irb_timeout_a : 1;
- bdrkreg_t eipw_rsvd : 29;
- } pi_err_int_pend_wr_fld_s;
-} pi_err_int_pend_wr_u_t;
-
-#else
-
-typedef union pi_err_int_pend_wr_u {
- bdrkreg_t pi_err_int_pend_wr_regval;
- struct {
- bdrkreg_t eipw_rsvd : 29;
- bdrkreg_t eipw_irb_timeout_a : 1;
- bdrkreg_t eipw_irb_timeout_b : 1;
- bdrkreg_t eipw_irb_err_a : 1;
- bdrkreg_t eipw_irb_err_b : 1;
- bdrkreg_t eipw_pkt_len_err_a : 1;
- bdrkreg_t eipw_pkt_len_err_b : 1;
- bdrkreg_t eipw_ue_cached_a : 1;
- bdrkreg_t eipw_ue_cached_b : 1;
- bdrkreg_t eipw_sysad_bad_data_a : 1;
- bdrkreg_t eipw_sysad_bad_data_b : 1;
- bdrkreg_t eipw_mem_unc : 1;
- bdrkreg_t eipw_sysstate_tag_a : 1;
- bdrkreg_t eipw_sysstate_tag_b : 1;
- bdrkreg_t eipw_ue_uncached_a : 1;
- bdrkreg_t eipw_ue_uncached_b : 1;
- bdrkreg_t eipw_spool_err_a : 1;
- bdrkreg_t eipw_spool_err_b : 1;
- bdrkreg_t eipw_syscmd_addr_par_a : 1;
- bdrkreg_t eipw_syscmd_addr_par_b : 1;
- bdrkreg_t eipw_syscmd_data_par_a : 1;
- bdrkreg_t eipw_syscmd_data_par_b : 1;
- bdrkreg_t eipw_sysad_addr_ecc_a : 1;
- bdrkreg_t eipw_sysad_addr_ecc_b : 1;
- bdrkreg_t eipw_sysad_data_ecc_a : 1;
- bdrkreg_t eipw_sysad_data_ecc_b : 1;
- bdrkreg_t eipw_sysstate_par_a : 1;
- bdrkreg_t eipw_sysstate_par_b : 1;
- bdrkreg_t eipw_wrb_werr_a : 1;
- bdrkreg_t eipw_wrb_werr_b : 1;
- bdrkreg_t eipw_wrb_terr_a : 1;
- bdrkreg_t eipw_wrb_terr_b : 1;
- bdrkreg_t eipw_spurious_a : 1;
- bdrkreg_t eipw_spurious_b : 1;
- bdrkreg_t eipw_spool_comp_a : 1;
- bdrkreg_t eipw_spool_comp_b : 1;
- } pi_err_int_pend_wr_fld_s;
-} pi_err_int_pend_wr_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: A read of this register returns all sources of *
- * Bedrock Error Interrupts. Storing to the write-with-clear location *
- * clears any bit for which a one appears on the data bus. Storing to *
- * the writable location does a direct write to all unreserved bits *
- * (except for MEM_UNC). *
- * In Synergy mode, the processor that is the source of the command *
- * that got an error is independent of the A or B SysAD bus. So in *
- * Synergy mode, Synergy provides the source processor number in bit *
- * 52 of the SysAD bus in all commands. The PI saves this in the RRB *
- * or WRB entry, and uses that value to determine which error bit (A *
- * or B) to set, as well as which ERR_STATUS and spool registers to *
- * use, for all error types in this register that are specified as an *
- * error to CPU_A or CPU_B. *
- * This register is not cleared at reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_int_pend_u {
- bdrkreg_t pi_err_int_pend_regval;
- struct {
- bdrkreg_t eip_spool_comp_b : 1;
- bdrkreg_t eip_spool_comp_a : 1;
- bdrkreg_t eip_spurious_b : 1;
- bdrkreg_t eip_spurious_a : 1;
- bdrkreg_t eip_wrb_terr_b : 1;
- bdrkreg_t eip_wrb_terr_a : 1;
- bdrkreg_t eip_wrb_werr_b : 1;
- bdrkreg_t eip_wrb_werr_a : 1;
- bdrkreg_t eip_sysstate_par_b : 1;
- bdrkreg_t eip_sysstate_par_a : 1;
- bdrkreg_t eip_sysad_data_ecc_b : 1;
- bdrkreg_t eip_sysad_data_ecc_a : 1;
- bdrkreg_t eip_sysad_addr_ecc_b : 1;
- bdrkreg_t eip_sysad_addr_ecc_a : 1;
- bdrkreg_t eip_syscmd_data_par_b : 1;
- bdrkreg_t eip_syscmd_data_par_a : 1;
- bdrkreg_t eip_syscmd_addr_par_b : 1;
- bdrkreg_t eip_syscmd_addr_par_a : 1;
- bdrkreg_t eip_spool_err_b : 1;
- bdrkreg_t eip_spool_err_a : 1;
- bdrkreg_t eip_ue_uncached_b : 1;
- bdrkreg_t eip_ue_uncached_a : 1;
- bdrkreg_t eip_sysstate_tag_b : 1;
- bdrkreg_t eip_sysstate_tag_a : 1;
- bdrkreg_t eip_mem_unc : 1;
- bdrkreg_t eip_sysad_bad_data_b : 1;
- bdrkreg_t eip_sysad_bad_data_a : 1;
- bdrkreg_t eip_ue_cached_b : 1;
- bdrkreg_t eip_ue_cached_a : 1;
- bdrkreg_t eip_pkt_len_err_b : 1;
- bdrkreg_t eip_pkt_len_err_a : 1;
- bdrkreg_t eip_irb_err_b : 1;
- bdrkreg_t eip_irb_err_a : 1;
- bdrkreg_t eip_irb_timeout_b : 1;
- bdrkreg_t eip_irb_timeout_a : 1;
- bdrkreg_t eip_rsvd : 29;
- } pi_err_int_pend_fld_s;
-} pi_err_int_pend_u_t;
-
-#else
-
-typedef union pi_err_int_pend_u {
- bdrkreg_t pi_err_int_pend_regval;
- struct {
- bdrkreg_t eip_rsvd : 29;
- bdrkreg_t eip_irb_timeout_a : 1;
- bdrkreg_t eip_irb_timeout_b : 1;
- bdrkreg_t eip_irb_err_a : 1;
- bdrkreg_t eip_irb_err_b : 1;
- bdrkreg_t eip_pkt_len_err_a : 1;
- bdrkreg_t eip_pkt_len_err_b : 1;
- bdrkreg_t eip_ue_cached_a : 1;
- bdrkreg_t eip_ue_cached_b : 1;
- bdrkreg_t eip_sysad_bad_data_a : 1;
- bdrkreg_t eip_sysad_bad_data_b : 1;
- bdrkreg_t eip_mem_unc : 1;
- bdrkreg_t eip_sysstate_tag_a : 1;
- bdrkreg_t eip_sysstate_tag_b : 1;
- bdrkreg_t eip_ue_uncached_a : 1;
- bdrkreg_t eip_ue_uncached_b : 1;
- bdrkreg_t eip_spool_err_a : 1;
- bdrkreg_t eip_spool_err_b : 1;
- bdrkreg_t eip_syscmd_addr_par_a : 1;
- bdrkreg_t eip_syscmd_addr_par_b : 1;
- bdrkreg_t eip_syscmd_data_par_a : 1;
- bdrkreg_t eip_syscmd_data_par_b : 1;
- bdrkreg_t eip_sysad_addr_ecc_a : 1;
- bdrkreg_t eip_sysad_addr_ecc_b : 1;
- bdrkreg_t eip_sysad_data_ecc_a : 1;
- bdrkreg_t eip_sysad_data_ecc_b : 1;
- bdrkreg_t eip_sysstate_par_a : 1;
- bdrkreg_t eip_sysstate_par_b : 1;
- bdrkreg_t eip_wrb_werr_a : 1;
- bdrkreg_t eip_wrb_werr_b : 1;
- bdrkreg_t eip_wrb_terr_a : 1;
- bdrkreg_t eip_wrb_terr_b : 1;
- bdrkreg_t eip_spurious_a : 1;
- bdrkreg_t eip_spurious_b : 1;
- bdrkreg_t eip_spool_comp_a : 1;
- bdrkreg_t eip_spool_comp_b : 1;
- } pi_err_int_pend_fld_s;
-} pi_err_int_pend_u_t;
-
-#endif
-
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This read/write *
- * register masks the contents of ERR_INT_PEND to determine which *
- * conditions cause a Level-6 interrupt to CPU_A or CPU_B. A bit set *
- * allows the interrupt. Only one processor in a Bedrock should *
- * enable the Memory/Directory Uncorrectable Error bit. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_int_mask_a_u {
- bdrkreg_t pi_err_int_mask_a_regval;
- struct {
- bdrkreg_t eima_mask : 35;
- bdrkreg_t eima_rsvd : 29;
- } pi_err_int_mask_a_fld_s;
-} pi_err_int_mask_a_u_t;
-
-#else
-
-typedef union pi_err_int_mask_a_u {
- bdrkreg_t pi_err_int_mask_a_regval;
- struct {
- bdrkreg_t eima_rsvd : 29;
- bdrkreg_t eima_mask : 35;
- } pi_err_int_mask_a_fld_s;
-} pi_err_int_mask_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. This read/write *
- * register masks the contents of ERR_INT_PEND to determine which *
- * conditions cause a Level-6 interrupt to CPU_A or CPU_B. A bit set *
- * allows the interrupt. Only one processor in a Bedrock should *
- * enable the Memory/Directory Uncorrectable Error bit. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_int_mask_b_u {
- bdrkreg_t pi_err_int_mask_b_regval;
- struct {
- bdrkreg_t eimb_mask : 35;
- bdrkreg_t eimb_rsvd : 29;
- } pi_err_int_mask_b_fld_s;
-} pi_err_int_mask_b_u_t;
-
-#else
-
-typedef union pi_err_int_mask_b_u {
- bdrkreg_t pi_err_int_mask_b_regval;
- struct {
- bdrkreg_t eimb_rsvd : 29;
- bdrkreg_t eimb_mask : 35;
- } pi_err_int_mask_b_fld_s;
-} pi_err_int_mask_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. This *
- * register is the address of the next write to the error stack. This *
- * register is incremented after each such write. Only the low N bits *
- * are incremented, where N is defined by the size of the error stack *
- * specified in the ERR_STACK_SIZE register. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_stack_addr_a_u {
- bdrkreg_t pi_err_stack_addr_a_regval;
- struct {
- bdrkreg_t esaa_rsvd_1 : 3;
- bdrkreg_t esaa_addr : 30;
- bdrkreg_t esaa_rsvd : 31;
- } pi_err_stack_addr_a_fld_s;
-} pi_err_stack_addr_a_u_t;
-
-#else
-
-typedef union pi_err_stack_addr_a_u {
- bdrkreg_t pi_err_stack_addr_a_regval;
- struct {
- bdrkreg_t esaa_rsvd : 31;
- bdrkreg_t esaa_addr : 30;
- bdrkreg_t esaa_rsvd_1 : 3;
- } pi_err_stack_addr_a_fld_s;
-} pi_err_stack_addr_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: There is one of these registers for each CPU. This *
- * register is the address of the next write to the error stack. This *
- * register is incremented after each such write. Only the low N bits *
- * are incremented, where N is defined by the size of the error stack *
- * specified in the ERR_STACK_SIZE register. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_stack_addr_b_u {
- bdrkreg_t pi_err_stack_addr_b_regval;
- struct {
- bdrkreg_t esab_rsvd_1 : 3;
- bdrkreg_t esab_addr : 30;
- bdrkreg_t esab_rsvd : 31;
- } pi_err_stack_addr_b_fld_s;
-} pi_err_stack_addr_b_u_t;
-
-#else
-
-typedef union pi_err_stack_addr_b_u {
- bdrkreg_t pi_err_stack_addr_b_regval;
- struct {
- bdrkreg_t esab_rsvd : 31;
- bdrkreg_t esab_addr : 30;
- bdrkreg_t esab_rsvd_1 : 3;
- } pi_err_stack_addr_b_fld_s;
-} pi_err_stack_addr_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: Sets the size (number of 64-bit entries) in the *
- * error stack that is spooled to local memory when an error occurs. *
- * Table16 defines the format of each entry in the spooled error *
- * stack. *
- * This register is not reset by a soft reset. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_stack_size_u {
- bdrkreg_t pi_err_stack_size_regval;
- struct {
- bdrkreg_t ess_size : 4;
- bdrkreg_t ess_rsvd : 60;
- } pi_err_stack_size_fld_s;
-} pi_err_stack_size_u_t;
-
-#else
-
-typedef union pi_err_stack_size_u {
- bdrkreg_t pi_err_stack_size_regval;
- struct {
- bdrkreg_t ess_rsvd : 60;
- bdrkreg_t ess_size : 4;
- } pi_err_stack_size_fld_s;
-} pi_err_stack_size_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_A and ERR_STATUS1_A registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status0_a_u {
- bdrkreg_t pi_err_status0_a_regval;
- struct {
- bdrkreg_t esa_error_type : 3;
- bdrkreg_t esa_proc_req_num : 3;
- bdrkreg_t esa_supplemental : 11;
- bdrkreg_t esa_cmd : 8;
- bdrkreg_t esa_addr : 37;
- bdrkreg_t esa_over_run : 1;
- bdrkreg_t esa_valid : 1;
- } pi_err_status0_a_fld_s;
-} pi_err_status0_a_u_t;
-
-#else
-
-typedef union pi_err_status0_a_u {
- bdrkreg_t pi_err_status0_a_regval;
- struct {
- bdrkreg_t esa_valid : 1;
- bdrkreg_t esa_over_run : 1;
- bdrkreg_t esa_addr : 37;
- bdrkreg_t esa_cmd : 8;
- bdrkreg_t esa_supplemental : 11;
- bdrkreg_t esa_proc_req_num : 3;
- bdrkreg_t esa_error_type : 3;
- } pi_err_status0_a_fld_s;
-} pi_err_status0_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_A and ERR_STATUS1_A registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status0_a_clr_u {
- bdrkreg_t pi_err_status0_a_clr_regval;
- struct {
- bdrkreg_t esac_error_type : 3;
- bdrkreg_t esac_proc_req_num : 3;
- bdrkreg_t esac_supplemental : 11;
- bdrkreg_t esac_cmd : 8;
- bdrkreg_t esac_addr : 37;
- bdrkreg_t esac_over_run : 1;
- bdrkreg_t esac_valid : 1;
- } pi_err_status0_a_clr_fld_s;
-} pi_err_status0_a_clr_u_t;
-
-#else
-
-typedef union pi_err_status0_a_clr_u {
- bdrkreg_t pi_err_status0_a_clr_regval;
- struct {
- bdrkreg_t esac_valid : 1;
- bdrkreg_t esac_over_run : 1;
- bdrkreg_t esac_addr : 37;
- bdrkreg_t esac_cmd : 8;
- bdrkreg_t esac_supplemental : 11;
- bdrkreg_t esac_proc_req_num : 3;
- bdrkreg_t esac_error_type : 3;
- } pi_err_status0_a_clr_fld_s;
-} pi_err_status0_a_clr_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_A and ERR_STATUS1_A registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status1_a_u {
- bdrkreg_t pi_err_status1_a_regval;
- struct {
- bdrkreg_t esa_spool_count : 21;
- bdrkreg_t esa_time_out_count : 8;
- bdrkreg_t esa_inval_count : 10;
- bdrkreg_t esa_crb_num : 3;
- bdrkreg_t esa_wrb : 1;
- bdrkreg_t esa_e_bits : 2;
- bdrkreg_t esa_t_bit : 1;
- bdrkreg_t esa_i_bit : 1;
- bdrkreg_t esa_h_bit : 1;
- bdrkreg_t esa_w_bit : 1;
- bdrkreg_t esa_a_bit : 1;
- bdrkreg_t esa_r_bit : 1;
- bdrkreg_t esa_v_bit : 1;
- bdrkreg_t esa_p_bit : 1;
- bdrkreg_t esa_source : 11;
- } pi_err_status1_a_fld_s;
-} pi_err_status1_a_u_t;
-
-#else
-
-typedef union pi_err_status1_a_u {
- bdrkreg_t pi_err_status1_a_regval;
- struct {
- bdrkreg_t esa_source : 11;
- bdrkreg_t esa_p_bit : 1;
- bdrkreg_t esa_v_bit : 1;
- bdrkreg_t esa_r_bit : 1;
- bdrkreg_t esa_a_bit : 1;
- bdrkreg_t esa_w_bit : 1;
- bdrkreg_t esa_h_bit : 1;
- bdrkreg_t esa_i_bit : 1;
- bdrkreg_t esa_t_bit : 1;
- bdrkreg_t esa_e_bits : 2;
- bdrkreg_t esa_wrb : 1;
- bdrkreg_t esa_crb_num : 3;
- bdrkreg_t esa_inval_count : 10;
- bdrkreg_t esa_time_out_count : 8;
- bdrkreg_t esa_spool_count : 21;
- } pi_err_status1_a_fld_s;
-} pi_err_status1_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_A and ERR_STATUS1_A registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status1_a_clr_u {
- bdrkreg_t pi_err_status1_a_clr_regval;
- struct {
- bdrkreg_t esac_spool_count : 21;
- bdrkreg_t esac_time_out_count : 8;
- bdrkreg_t esac_inval_count : 10;
- bdrkreg_t esac_crb_num : 3;
- bdrkreg_t esac_wrb : 1;
- bdrkreg_t esac_e_bits : 2;
- bdrkreg_t esac_t_bit : 1;
- bdrkreg_t esac_i_bit : 1;
- bdrkreg_t esac_h_bit : 1;
- bdrkreg_t esac_w_bit : 1;
- bdrkreg_t esac_a_bit : 1;
- bdrkreg_t esac_r_bit : 1;
- bdrkreg_t esac_v_bit : 1;
- bdrkreg_t esac_p_bit : 1;
- bdrkreg_t esac_source : 11;
- } pi_err_status1_a_clr_fld_s;
-} pi_err_status1_a_clr_u_t;
-
-#else
-
-typedef union pi_err_status1_a_clr_u {
- bdrkreg_t pi_err_status1_a_clr_regval;
- struct {
- bdrkreg_t esac_source : 11;
- bdrkreg_t esac_p_bit : 1;
- bdrkreg_t esac_v_bit : 1;
- bdrkreg_t esac_r_bit : 1;
- bdrkreg_t esac_a_bit : 1;
- bdrkreg_t esac_w_bit : 1;
- bdrkreg_t esac_h_bit : 1;
- bdrkreg_t esac_i_bit : 1;
- bdrkreg_t esac_t_bit : 1;
- bdrkreg_t esac_e_bits : 2;
- bdrkreg_t esac_wrb : 1;
- bdrkreg_t esac_crb_num : 3;
- bdrkreg_t esac_inval_count : 10;
- bdrkreg_t esac_time_out_count : 8;
- bdrkreg_t esac_spool_count : 21;
- } pi_err_status1_a_clr_fld_s;
-} pi_err_status1_a_clr_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_B and ERR_STATUS1_B registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status0_b_u {
- bdrkreg_t pi_err_status0_b_regval;
- struct {
- bdrkreg_t esb_error_type : 3;
- bdrkreg_t esb_proc_request_number : 3;
- bdrkreg_t esb_supplemental : 11;
- bdrkreg_t esb_cmd : 8;
- bdrkreg_t esb_addr : 37;
- bdrkreg_t esb_over_run : 1;
- bdrkreg_t esb_valid : 1;
- } pi_err_status0_b_fld_s;
-} pi_err_status0_b_u_t;
-
-#else
-
-typedef union pi_err_status0_b_u {
- bdrkreg_t pi_err_status0_b_regval;
- struct {
- bdrkreg_t esb_valid : 1;
- bdrkreg_t esb_over_run : 1;
- bdrkreg_t esb_addr : 37;
- bdrkreg_t esb_cmd : 8;
- bdrkreg_t esb_supplemental : 11;
- bdrkreg_t esb_proc_request_number : 3;
- bdrkreg_t esb_error_type : 3;
- } pi_err_status0_b_fld_s;
-} pi_err_status0_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_B and ERR_STATUS1_B registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status0_b_clr_u {
- bdrkreg_t pi_err_status0_b_clr_regval;
- struct {
- bdrkreg_t esbc_error_type : 3;
- bdrkreg_t esbc_proc_request_number : 3;
- bdrkreg_t esbc_supplemental : 11;
- bdrkreg_t esbc_cmd : 8;
- bdrkreg_t esbc_addr : 37;
- bdrkreg_t esbc_over_run : 1;
- bdrkreg_t esbc_valid : 1;
- } pi_err_status0_b_clr_fld_s;
-} pi_err_status0_b_clr_u_t;
-
-#else
-
-typedef union pi_err_status0_b_clr_u {
- bdrkreg_t pi_err_status0_b_clr_regval;
- struct {
- bdrkreg_t esbc_valid : 1;
- bdrkreg_t esbc_over_run : 1;
- bdrkreg_t esbc_addr : 37;
- bdrkreg_t esbc_cmd : 8;
- bdrkreg_t esbc_supplemental : 11;
- bdrkreg_t esbc_proc_request_number : 3;
- bdrkreg_t esbc_error_type : 3;
- } pi_err_status0_b_clr_fld_s;
-} pi_err_status0_b_clr_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_B and ERR_STATUS1_B registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status1_b_u {
- bdrkreg_t pi_err_status1_b_regval;
- struct {
- bdrkreg_t esb_spool_count : 21;
- bdrkreg_t esb_time_out_count : 8;
- bdrkreg_t esb_inval_count : 10;
- bdrkreg_t esb_crb_num : 3;
- bdrkreg_t esb_wrb : 1;
- bdrkreg_t esb_e_bits : 2;
- bdrkreg_t esb_t_bit : 1;
- bdrkreg_t esb_i_bit : 1;
- bdrkreg_t esb_h_bit : 1;
- bdrkreg_t esb_w_bit : 1;
- bdrkreg_t esb_a_bit : 1;
- bdrkreg_t esb_r_bit : 1;
- bdrkreg_t esb_v_bit : 1;
- bdrkreg_t esb_p_bit : 1;
- bdrkreg_t esb_source : 11;
- } pi_err_status1_b_fld_s;
-} pi_err_status1_b_u_t;
-
-#else
-
-typedef union pi_err_status1_b_u {
- bdrkreg_t pi_err_status1_b_regval;
- struct {
- bdrkreg_t esb_source : 11;
- bdrkreg_t esb_p_bit : 1;
- bdrkreg_t esb_v_bit : 1;
- bdrkreg_t esb_r_bit : 1;
- bdrkreg_t esb_a_bit : 1;
- bdrkreg_t esb_w_bit : 1;
- bdrkreg_t esb_h_bit : 1;
- bdrkreg_t esb_i_bit : 1;
- bdrkreg_t esb_t_bit : 1;
- bdrkreg_t esb_e_bits : 2;
- bdrkreg_t esb_wrb : 1;
- bdrkreg_t esb_crb_num : 3;
- bdrkreg_t esb_inval_count : 10;
- bdrkreg_t esb_time_out_count : 8;
- bdrkreg_t esb_spool_count : 21;
- } pi_err_status1_b_fld_s;
-} pi_err_status1_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. Writing this register with *
- * the Write-clear address (with any data) clears both the *
- * ERR_STATUS0_B and ERR_STATUS1_B registers. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_status1_b_clr_u {
- bdrkreg_t pi_err_status1_b_clr_regval;
- struct {
- bdrkreg_t esbc_spool_count : 21;
- bdrkreg_t esbc_time_out_count : 8;
- bdrkreg_t esbc_inval_count : 10;
- bdrkreg_t esbc_crb_num : 3;
- bdrkreg_t esbc_wrb : 1;
- bdrkreg_t esbc_e_bits : 2;
- bdrkreg_t esbc_t_bit : 1;
- bdrkreg_t esbc_i_bit : 1;
- bdrkreg_t esbc_h_bit : 1;
- bdrkreg_t esbc_w_bit : 1;
- bdrkreg_t esbc_a_bit : 1;
- bdrkreg_t esbc_r_bit : 1;
- bdrkreg_t esbc_v_bit : 1;
- bdrkreg_t esbc_p_bit : 1;
- bdrkreg_t esbc_source : 11;
- } pi_err_status1_b_clr_fld_s;
-} pi_err_status1_b_clr_u_t;
-
-#else
-
-typedef union pi_err_status1_b_clr_u {
- bdrkreg_t pi_err_status1_b_clr_regval;
- struct {
- bdrkreg_t esbc_source : 11;
- bdrkreg_t esbc_p_bit : 1;
- bdrkreg_t esbc_v_bit : 1;
- bdrkreg_t esbc_r_bit : 1;
- bdrkreg_t esbc_a_bit : 1;
- bdrkreg_t esbc_w_bit : 1;
- bdrkreg_t esbc_h_bit : 1;
- bdrkreg_t esbc_i_bit : 1;
- bdrkreg_t esbc_t_bit : 1;
- bdrkreg_t esbc_e_bits : 2;
- bdrkreg_t esbc_wrb : 1;
- bdrkreg_t esbc_crb_num : 3;
- bdrkreg_t esbc_inval_count : 10;
- bdrkreg_t esbc_time_out_count : 8;
- bdrkreg_t esbc_spool_count : 21;
- } pi_err_status1_b_clr_fld_s;
-} pi_err_status1_b_clr_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_spool_cmp_a_u {
- bdrkreg_t pi_spool_cmp_a_regval;
- struct {
- bdrkreg_t sca_compare : 20;
- bdrkreg_t sca_rsvd : 44;
- } pi_spool_cmp_a_fld_s;
-} pi_spool_cmp_a_u_t;
-
-#else
-
-typedef union pi_spool_cmp_a_u {
- bdrkreg_t pi_spool_cmp_a_regval;
- struct {
- bdrkreg_t sca_rsvd : 44;
- bdrkreg_t sca_compare : 20;
- } pi_spool_cmp_a_fld_s;
-} pi_spool_cmp_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_spool_cmp_b_u {
- bdrkreg_t pi_spool_cmp_b_regval;
- struct {
- bdrkreg_t scb_compare : 20;
- bdrkreg_t scb_rsvd : 44;
- } pi_spool_cmp_b_fld_s;
-} pi_spool_cmp_b_u_t;
-
-#else
-
-typedef union pi_spool_cmp_b_u {
- bdrkreg_t pi_spool_cmp_b_regval;
- struct {
- bdrkreg_t scb_rsvd : 44;
- bdrkreg_t scb_compare : 20;
- } pi_spool_cmp_b_fld_s;
-} pi_spool_cmp_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. A timeout can be *
- * forced by writing one(s). *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_crb_timeout_a_u {
- bdrkreg_t pi_crb_timeout_a_regval;
- struct {
- bdrkreg_t cta_rrb : 4;
- bdrkreg_t cta_wrb : 8;
- bdrkreg_t cta_rsvd : 52;
- } pi_crb_timeout_a_fld_s;
-} pi_crb_timeout_a_u_t;
-
-#else
-
-typedef union pi_crb_timeout_a_u {
- bdrkreg_t pi_crb_timeout_a_regval;
- struct {
- bdrkreg_t cta_rsvd : 52;
- bdrkreg_t cta_wrb : 8;
- bdrkreg_t cta_rrb : 4;
- } pi_crb_timeout_a_fld_s;
-} pi_crb_timeout_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. A timeout can be *
- * forced by writing one(s). *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_crb_timeout_b_u {
- bdrkreg_t pi_crb_timeout_b_regval;
- struct {
- bdrkreg_t ctb_rrb : 4;
- bdrkreg_t ctb_wrb : 8;
- bdrkreg_t ctb_rsvd : 52;
- } pi_crb_timeout_b_fld_s;
-} pi_crb_timeout_b_u_t;
-
-#else
-
-typedef union pi_crb_timeout_b_u {
- bdrkreg_t pi_crb_timeout_b_regval;
- struct {
- bdrkreg_t ctb_rsvd : 52;
- bdrkreg_t ctb_wrb : 8;
- bdrkreg_t ctb_rrb : 4;
- } pi_crb_timeout_b_fld_s;
-} pi_crb_timeout_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register controls error checking and forwarding of SysAD *
- * errors. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_sysad_errchk_en_u {
- bdrkreg_t pi_sysad_errchk_en_regval;
- struct {
- bdrkreg_t see_ecc_gen_en : 1;
- bdrkreg_t see_qual_gen_en : 1;
- bdrkreg_t see_sadp_chk_en : 1;
- bdrkreg_t see_cmdp_chk_en : 1;
- bdrkreg_t see_state_chk_en : 1;
- bdrkreg_t see_qual_chk_en : 1;
- bdrkreg_t see_rsvd : 58;
- } pi_sysad_errchk_en_fld_s;
-} pi_sysad_errchk_en_u_t;
-
-#else
-
-typedef union pi_sysad_errchk_en_u {
- bdrkreg_t pi_sysad_errchk_en_regval;
- struct {
- bdrkreg_t see_rsvd : 58;
- bdrkreg_t see_qual_chk_en : 1;
- bdrkreg_t see_state_chk_en : 1;
- bdrkreg_t see_cmdp_chk_en : 1;
- bdrkreg_t see_sadp_chk_en : 1;
- bdrkreg_t see_qual_gen_en : 1;
- bdrkreg_t see_ecc_gen_en : 1;
- } pi_sysad_errchk_en_fld_s;
-} pi_sysad_errchk_en_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. If any bit in this *
- * register is set, then whenever reply data arrives with the UE *
- * (uncorrectable error) indication set, the check-bits that are *
- * generated and sent to the SysAD will be inverted corresponding to *
- * the bits set in the register. This will also prevent the assertion *
- * of the data quality indicator. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_force_bad_check_bit_a_u {
- bdrkreg_t pi_force_bad_check_bit_a_regval;
- struct {
- bdrkreg_t fbcba_bad_check_bit : 8;
- bdrkreg_t fbcba_rsvd : 56;
- } pi_force_bad_check_bit_a_fld_s;
-} pi_force_bad_check_bit_a_u_t;
-
-#else
-
-typedef union pi_force_bad_check_bit_a_u {
- bdrkreg_t pi_force_bad_check_bit_a_regval;
- struct {
- bdrkreg_t fbcba_rsvd : 56;
- bdrkreg_t fbcba_bad_check_bit : 8;
- } pi_force_bad_check_bit_a_fld_s;
-} pi_force_bad_check_bit_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. If any bit in this *
- * register is set, then whenever reply data arrives with the UE *
- * (uncorrectable error) indication set, the check-bits that are *
- * generated and sent to the SysAD will be inverted corresponding to *
- * the bits set in the register. This will also prevent the assertion *
- * of the data quality indicator. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_force_bad_check_bit_b_u {
- bdrkreg_t pi_force_bad_check_bit_b_regval;
- struct {
- bdrkreg_t fbcbb_bad_check_bit : 8;
- bdrkreg_t fbcbb_rsvd : 56;
- } pi_force_bad_check_bit_b_fld_s;
-} pi_force_bad_check_bit_b_u_t;
-
-#else
-
-typedef union pi_force_bad_check_bit_b_u {
- bdrkreg_t pi_force_bad_check_bit_b_regval;
- struct {
- bdrkreg_t fbcbb_rsvd : 56;
- bdrkreg_t fbcbb_bad_check_bit : 8;
- } pi_force_bad_check_bit_b_fld_s;
-} pi_force_bad_check_bit_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When a counter is *
- * enabled, it increments each time a DNACK reply is received. The *
- * counter is cleared when any other reply is received. The register *
- * is cleared when the CNT_EN bit is zero. If a DNACK reply is *
- * received when the counter equals the value in the NACK_CMP *
- * register, the counter is cleared, an error response is sent to the *
- * CPU instead of a nack response, and the NACK_INT_A/B bit is set in *
- * INT_PEND1. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_nack_cnt_a_u {
- bdrkreg_t pi_nack_cnt_a_regval;
- struct {
- bdrkreg_t nca_nack_cnt : 20;
- bdrkreg_t nca_cnt_en : 1;
- bdrkreg_t nca_rsvd : 43;
- } pi_nack_cnt_a_fld_s;
-} pi_nack_cnt_a_u_t;
-
-#else
-
-typedef union pi_nack_cnt_a_u {
- bdrkreg_t pi_nack_cnt_a_regval;
- struct {
- bdrkreg_t nca_rsvd : 43;
- bdrkreg_t nca_cnt_en : 1;
- bdrkreg_t nca_nack_cnt : 20;
- } pi_nack_cnt_a_fld_s;
-} pi_nack_cnt_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * There is one of these registers for each CPU. When a counter is *
- * enabled, it increments each time a DNACK reply is received. The *
- * counter is cleared when any other reply is received. The register *
- * is cleared when the CNT_EN bit is zero. If a DNACK reply is *
- * received when the counter equals the value in the NACK_CMP *
- * register, the counter is cleared, an error response is sent to the *
- * CPU instead of a nack response, and the NACK_INT_A/B bit is set in *
- * INT_PEND1. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_nack_cnt_b_u {
- bdrkreg_t pi_nack_cnt_b_regval;
- struct {
- bdrkreg_t ncb_nack_cnt : 20;
- bdrkreg_t ncb_cnt_en : 1;
- bdrkreg_t ncb_rsvd : 43;
- } pi_nack_cnt_b_fld_s;
-} pi_nack_cnt_b_u_t;
-
-#else
-
-typedef union pi_nack_cnt_b_u {
- bdrkreg_t pi_nack_cnt_b_regval;
- struct {
- bdrkreg_t ncb_rsvd : 43;
- bdrkreg_t ncb_cnt_en : 1;
- bdrkreg_t ncb_nack_cnt : 20;
- } pi_nack_cnt_b_fld_s;
-} pi_nack_cnt_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * The setting of this register affects both CPUs on this PI. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_nack_cmp_u {
- bdrkreg_t pi_nack_cmp_regval;
- struct {
- bdrkreg_t nc_nack_cmp : 20;
- bdrkreg_t nc_rsvd : 44;
- } pi_nack_cmp_fld_s;
-} pi_nack_cmp_u_t;
-
-#else
-
-typedef union pi_nack_cmp_u {
- bdrkreg_t pi_nack_cmp_regval;
- struct {
- bdrkreg_t nc_rsvd : 44;
- bdrkreg_t nc_nack_cmp : 20;
- } pi_nack_cmp_fld_s;
-} pi_nack_cmp_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register controls which errors are spooled. When a bit in *
- * this register is set, the corresponding error is spooled. The *
- * setting of this register affects both CPUs on this PI. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_spool_mask_u {
- bdrkreg_t pi_spool_mask_regval;
- struct {
- bdrkreg_t sm_access_err : 1;
- bdrkreg_t sm_uncached_err : 1;
- bdrkreg_t sm_dir_err : 1;
- bdrkreg_t sm_timeout_err : 1;
- bdrkreg_t sm_poison_err : 1;
- bdrkreg_t sm_nack_oflow_err : 1;
- bdrkreg_t sm_rsvd : 58;
- } pi_spool_mask_fld_s;
-} pi_spool_mask_u_t;
-
-#else
-
-typedef union pi_spool_mask_u {
- bdrkreg_t pi_spool_mask_regval;
- struct {
- bdrkreg_t sm_rsvd : 58;
- bdrkreg_t sm_nack_oflow_err : 1;
- bdrkreg_t sm_poison_err : 1;
- bdrkreg_t sm_timeout_err : 1;
- bdrkreg_t sm_dir_err : 1;
- bdrkreg_t sm_uncached_err : 1;
- bdrkreg_t sm_access_err : 1;
- } pi_spool_mask_fld_s;
-} pi_spool_mask_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. When the VALID bit is *
- * zero, this register (along with SPURIOUS_HDR_1) will capture the *
- * header of an incoming spurious message received from the XBar. A *
- * spurious message is a message that does not match up with any of *
- * the CRB entries. This is a read/write register, so it is cleared *
- * by writing of all zeros. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_spurious_hdr_0_u {
- bdrkreg_t pi_spurious_hdr_0_regval;
- struct {
- bdrkreg_t sh0_prev_valid_b : 1;
- bdrkreg_t sh0_prev_valid_a : 1;
- bdrkreg_t sh0_rsvd : 4;
- bdrkreg_t sh0_supplemental : 11;
- bdrkreg_t sh0_cmd : 8;
- bdrkreg_t sh0_addr : 37;
- bdrkreg_t sh0_tail : 1;
- bdrkreg_t sh0_valid : 1;
- } pi_spurious_hdr_0_fld_s;
-} pi_spurious_hdr_0_u_t;
-
-#else
-
-typedef union pi_spurious_hdr_0_u {
- bdrkreg_t pi_spurious_hdr_0_regval;
- struct {
- bdrkreg_t sh0_valid : 1;
- bdrkreg_t sh0_tail : 1;
- bdrkreg_t sh0_addr : 37;
- bdrkreg_t sh0_cmd : 8;
- bdrkreg_t sh0_supplemental : 11;
- bdrkreg_t sh0_rsvd : 4;
- bdrkreg_t sh0_prev_valid_a : 1;
- bdrkreg_t sh0_prev_valid_b : 1;
- } pi_spurious_hdr_0_fld_s;
-} pi_spurious_hdr_0_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is not cleared at reset. When the VALID bit in *
- * SPURIOUS_HDR_0 is zero, this register (along with SPURIOUS_HDR_0) *
- * will capture the header of an incoming spurious message received *
- * from the XBar. A spurious message is a message that does not match *
- * up with any of the CRB entries. This is a read/write register, so *
- * it is cleared by writing of all zeros. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_spurious_hdr_1_u {
- bdrkreg_t pi_spurious_hdr_1_regval;
- struct {
- bdrkreg_t sh1_rsvd : 53;
- bdrkreg_t sh1_source : 11;
- } pi_spurious_hdr_1_fld_s;
-} pi_spurious_hdr_1_u_t;
-
-#else
-
-typedef union pi_spurious_hdr_1_u {
- bdrkreg_t pi_spurious_hdr_1_regval;
- struct {
- bdrkreg_t sh1_source : 11;
- bdrkreg_t sh1_rsvd : 53;
- } pi_spurious_hdr_1_fld_s;
-} pi_spurious_hdr_1_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * Description: This register controls the injection of errors in *
- * outbound SysAD transfers. When a write sets a bit in this *
- * register, the PI logic is "armed" to inject that error. At the *
- * first transfer of the specified type, the error is injected and *
- * the bit in this register is cleared. Writing to this register does *
- * not cause a transaction to occur. A bit in this register will *
- * remain set until a transaction of the specified type occurs as a *
- * result of normal system activity. This register can be polled to *
- * determine if an error has been injected or is still "armed". *
- * This register does not control injection of data quality bad *
- * indicator on a data cycle. This type of error can be created by *
- * reading from a memory location that has an uncorrectable ECC *
- * error. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_err_inject_u {
- bdrkreg_t pi_err_inject_regval;
- struct {
- bdrkreg_t ei_cmd_syscmd_par_a : 1;
- bdrkreg_t ei_data_syscmd_par_a : 1;
- bdrkreg_t ei_cmd_sysad_corecc_a : 1;
- bdrkreg_t ei_data_sysad_corecc_a : 1;
- bdrkreg_t ei_cmd_sysad_uncecc_a : 1;
- bdrkreg_t ei_data_sysad_uncecc_a : 1;
- bdrkreg_t ei_sysresp_par_a : 1;
- bdrkreg_t ei_reserved_1 : 25;
- bdrkreg_t ei_cmd_syscmd_par_b : 1;
- bdrkreg_t ei_data_syscmd_par_b : 1;
- bdrkreg_t ei_cmd_sysad_corecc_b : 1;
- bdrkreg_t ei_data_sysad_corecc_b : 1;
- bdrkreg_t ei_cmd_sysad_uncecc_b : 1;
- bdrkreg_t ei_data_sysad_uncecc_b : 1;
- bdrkreg_t ei_sysresp_par_b : 1;
- bdrkreg_t ei_reserved : 25;
- } pi_err_inject_fld_s;
-} pi_err_inject_u_t;
-
-#else
-
-typedef union pi_err_inject_u {
- bdrkreg_t pi_err_inject_regval;
- struct {
- bdrkreg_t ei_reserved : 25;
- bdrkreg_t ei_sysresp_par_b : 1;
- bdrkreg_t ei_data_sysad_uncecc_b : 1;
- bdrkreg_t ei_cmd_sysad_uncecc_b : 1;
- bdrkreg_t ei_data_sysad_corecc_b : 1;
- bdrkreg_t ei_cmd_sysad_corecc_b : 1;
- bdrkreg_t ei_data_syscmd_par_b : 1;
- bdrkreg_t ei_cmd_syscmd_par_b : 1;
- bdrkreg_t ei_reserved_1 : 25;
- bdrkreg_t ei_sysresp_par_a : 1;
- bdrkreg_t ei_data_sysad_uncecc_a : 1;
- bdrkreg_t ei_cmd_sysad_uncecc_a : 1;
- bdrkreg_t ei_data_sysad_corecc_a : 1;
- bdrkreg_t ei_cmd_sysad_corecc_a : 1;
- bdrkreg_t ei_data_syscmd_par_a : 1;
- bdrkreg_t ei_cmd_syscmd_par_a : 1;
- } pi_err_inject_fld_s;
-} pi_err_inject_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This Read/Write location determines at what point the TRex+ is *
- * stopped from issuing requests, based on the number of entries in *
- * the incoming reply FIFO. When the number of entries in the Reply *
- * FIFO is greater than the value of this register, the PI will *
- * deassert both SysWrRdy and SysRdRdy to both processors. The Reply *
- * FIFO has a depth of 0x3F entries, so setting this register to 0x3F *
- * effectively disables this feature, allowing requests to be issued *
- * always. Setting this register to 0x00 effectively lowers the *
- * TRex+'s priority below the reply FIFO, disabling TRex+ requests *
- * any time there is an entry waiting in the incoming FIFO.This *
- * register is in its own 64KB page so that it can be mapped to user *
- * space. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_reply_level_u {
- bdrkreg_t pi_reply_level_regval;
- struct {
- bdrkreg_t rl_reply_level : 6;
- bdrkreg_t rl_rsvd : 58;
- } pi_reply_level_fld_s;
-} pi_reply_level_u_t;
-
-#else
-
-typedef union pi_reply_level_u {
- bdrkreg_t pi_reply_level_regval;
- struct {
- bdrkreg_t rl_rsvd : 58;
- bdrkreg_t rl_reply_level : 6;
- } pi_reply_level_fld_s;
-} pi_reply_level_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register is used to change the graphics credit counter *
- * operation from "Doubleword" mode to "Transaction" mode. This *
- * register is in its own 64KB page so that it can be mapped to user *
- * space. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_gfx_credit_mode_u {
- bdrkreg_t pi_gfx_credit_mode_regval;
- struct {
- bdrkreg_t gcm_trans_mode : 1;
- bdrkreg_t gcm_rsvd : 63;
- } pi_gfx_credit_mode_fld_s;
-} pi_gfx_credit_mode_u_t;
-
-#else
-
-typedef union pi_gfx_credit_mode_u {
- bdrkreg_t pi_gfx_credit_mode_regval;
- struct {
- bdrkreg_t gcm_rsvd : 63;
- bdrkreg_t gcm_trans_mode : 1;
- } pi_gfx_credit_mode_fld_s;
-} pi_gfx_credit_mode_u_t;
-
-#endif
-
-
-
-/************************************************************************
- * *
- * This location contains a 55-bit read/write counter that wraps to *
- * zero when the maximum value is reached. This counter is *
- * incremented at each rising edge of the global clock (GCLK). This *
- * register is in its own 64KB page so that it can be mapped to user *
- * space. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_rt_counter_u {
- bdrkreg_t pi_rt_counter_regval;
- struct {
- bdrkreg_t rc_count : 55;
- bdrkreg_t rc_rsvd : 9;
- } pi_rt_counter_fld_s;
-} pi_rt_counter_u_t;
-
-#else
-
-typedef union pi_rt_counter_u {
- bdrkreg_t pi_rt_counter_regval;
- struct {
- bdrkreg_t rc_rsvd : 9;
- bdrkreg_t rc_count : 55;
- } pi_rt_counter_fld_s;
-} pi_rt_counter_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register controls the performance counters for one CPU. *
- * There are two counters for each CPU. Each counter can be *
- * configured to count a variety of events. The performance counter *
- * registers for each processor are in their own 64KB page so that *
- * they can be mapped to user space. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntl_a_u {
- bdrkreg_t pi_perf_cntl_a_regval;
- struct {
- bdrkreg_t pca_cntr_0_select : 28;
- bdrkreg_t pca_cntr_0_mode : 3;
- bdrkreg_t pca_cntr_0_enable : 1;
- bdrkreg_t pca_cntr_1_select : 28;
- bdrkreg_t pca_cntr_1_mode : 3;
- bdrkreg_t pca_cntr_1_enable : 1;
- } pi_perf_cntl_a_fld_s;
-} pi_perf_cntl_a_u_t;
-
-#else
-
-typedef union pi_perf_cntl_a_u {
- bdrkreg_t pi_perf_cntl_a_regval;
- struct {
- bdrkreg_t pca_cntr_1_enable : 1;
- bdrkreg_t pca_cntr_1_mode : 3;
- bdrkreg_t pca_cntr_1_select : 28;
- bdrkreg_t pca_cntr_0_enable : 1;
- bdrkreg_t pca_cntr_0_mode : 3;
- bdrkreg_t pca_cntr_0_select : 28;
- } pi_perf_cntl_a_fld_s;
-} pi_perf_cntl_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register accesses the performance counter 0 for each CPU. *
- * Each performance counter is 40-bits wide. On overflow, It wraps to *
- * zero, sets the overflow bit in this register, and sets the *
- * PERF_CNTR_OFLOW bit in the INT_PEND1 register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntr0_a_u {
- bdrkreg_t pi_perf_cntr0_a_regval;
- struct {
- bdrkreg_t pca_count_value : 40;
- bdrkreg_t pca_overflow : 1;
- bdrkreg_t pca_rsvd : 23;
- } pi_perf_cntr0_a_fld_s;
-} pi_perf_cntr0_a_u_t;
-
-#else
-
-typedef union pi_perf_cntr0_a_u {
- bdrkreg_t pi_perf_cntr0_a_regval;
- struct {
- bdrkreg_t pca_rsvd : 23;
- bdrkreg_t pca_overflow : 1;
- bdrkreg_t pca_count_value : 40;
- } pi_perf_cntr0_a_fld_s;
-} pi_perf_cntr0_a_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register accesses the performance counter 1for each CPU. *
- * Each performance counter is 40-bits wide. On overflow, It wraps to *
- * zero, sets the overflow bit in this register, and sets the *
- * PERF_CNTR_OFLOW bit in the INT_PEND1 register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntr1_a_u {
- bdrkreg_t pi_perf_cntr1_a_regval;
- struct {
- bdrkreg_t pca_count_value : 40;
- bdrkreg_t pca_overflow : 1;
- bdrkreg_t pca_rsvd : 23;
- } pi_perf_cntr1_a_fld_s;
-} pi_perf_cntr1_a_u_t;
-
-#else
-
-typedef union pi_perf_cntr1_a_u {
- bdrkreg_t pi_perf_cntr1_a_regval;
- struct {
- bdrkreg_t pca_rsvd : 23;
- bdrkreg_t pca_overflow : 1;
- bdrkreg_t pca_count_value : 40;
- } pi_perf_cntr1_a_fld_s;
-} pi_perf_cntr1_a_u_t;
-
-#endif
-
-
-
-
-
-/************************************************************************
- * *
- * This register controls the performance counters for one CPU. *
- * There are two counters for each CPU. Each counter can be *
- * configured to count a variety of events. The performance counter *
- * registers for each processor are in their own 64KB page so that *
- * they can be mapped to user space. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntl_b_u {
- bdrkreg_t pi_perf_cntl_b_regval;
- struct {
- bdrkreg_t pcb_cntr_0_select : 28;
- bdrkreg_t pcb_cntr_0_mode : 3;
- bdrkreg_t pcb_cntr_0_enable : 1;
- bdrkreg_t pcb_cntr_1_select : 28;
- bdrkreg_t pcb_cntr_1_mode : 3;
- bdrkreg_t pcb_cntr_1_enable : 1;
- } pi_perf_cntl_b_fld_s;
-} pi_perf_cntl_b_u_t;
-
-#else
-
-typedef union pi_perf_cntl_b_u {
- bdrkreg_t pi_perf_cntl_b_regval;
- struct {
- bdrkreg_t pcb_cntr_1_enable : 1;
- bdrkreg_t pcb_cntr_1_mode : 3;
- bdrkreg_t pcb_cntr_1_select : 28;
- bdrkreg_t pcb_cntr_0_enable : 1;
- bdrkreg_t pcb_cntr_0_mode : 3;
- bdrkreg_t pcb_cntr_0_select : 28;
- } pi_perf_cntl_b_fld_s;
-} pi_perf_cntl_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register accesses the performance counter 0 for each CPU. *
- * Each performance counter is 40-bits wide. On overflow, It wraps to *
- * zero, sets the overflow bit in this register, and sets the *
- * PERF_CNTR_OFLOW bit in the INT_PEND1 register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntr0_b_u {
- bdrkreg_t pi_perf_cntr0_b_regval;
- struct {
- bdrkreg_t pcb_count_value : 40;
- bdrkreg_t pcb_overflow : 1;
- bdrkreg_t pcb_rsvd : 23;
- } pi_perf_cntr0_b_fld_s;
-} pi_perf_cntr0_b_u_t;
-
-#else
-
-typedef union pi_perf_cntr0_b_u {
- bdrkreg_t pi_perf_cntr0_b_regval;
- struct {
- bdrkreg_t pcb_rsvd : 23;
- bdrkreg_t pcb_overflow : 1;
- bdrkreg_t pcb_count_value : 40;
- } pi_perf_cntr0_b_fld_s;
-} pi_perf_cntr0_b_u_t;
-
-#endif
-
-
-
-
-/************************************************************************
- * *
- * This register accesses the performance counter 1for each CPU. *
- * Each performance counter is 40-bits wide. On overflow, It wraps to *
- * zero, sets the overflow bit in this register, and sets the *
- * PERF_CNTR_OFLOW bit in the INT_PEND1 register. *
- * *
- ************************************************************************/
-
-
-
-
-#ifdef LITTLE_ENDIAN
-
-typedef union pi_perf_cntr1_b_u {
- bdrkreg_t pi_perf_cntr1_b_regval;
- struct {
- bdrkreg_t pcb_count_value : 40;
- bdrkreg_t pcb_overflow : 1;
- bdrkreg_t pcb_rsvd : 23;
- } pi_perf_cntr1_b_fld_s;
-} pi_perf_cntr1_b_u_t;
-
-#else
-
-typedef union pi_perf_cntr1_b_u {
- bdrkreg_t pi_perf_cntr1_b_regval;
- struct {
- bdrkreg_t pcb_rsvd : 23;
- bdrkreg_t pcb_overflow : 1;
- bdrkreg_t pcb_count_value : 40;
- } pi_perf_cntr1_b_fld_s;
-} pi_perf_cntr1_b_u_t;
-
-#endif
-
-
-
-
-
-
-#endif /* __ASSEMBLY__ */
-
-/************************************************************************
- * *
- * MAKE ALL ADDITIONS AFTER THIS LINE *
- * *
- ************************************************************************/
-
-
-#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A)
-#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL
-
-
-#endif /* _ASM_IA64_SN_SN1_HUBPI_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)