patch-2.4.22 linux-2.4.22/include/asm-mips64/sibyte/swarm.h

• Lines: 90
• Date: 2003-08-25 04:44:44.000000000 -0700
• Orig file: linux-2.4.21/include/asm-mips64/sibyte/swarm.h
• Orig date: 2002-11-28 15:53:15.000000000 -0800

diff -urN linux-2.4.21/include/asm-mips64/sibyte/swarm.h linux-2.4.22/include/asm-mips64/sibyte/swarm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2001 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -21,46 +21,50 @@
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_int.h>
 
-#define KERNEL_RESERVED_MEM 0x100000
-
-#define LEDS_CS         3
-
 #ifdef CONFIG_SIBYTE_SWARM
+#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+#ifdef CONFIG_SIBYTE_PTSWARM
+#define SIBYTE_BOARD_NAME "PTSWARM"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
+#ifdef CONFIG_SIBYTE_LITTLESUR
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "cfe0"
+#endif
+#ifdef CONFIG_SIBYTE_CRHONE
+#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+#ifdef CONFIG_SIBYTE_CRHINE
+#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
 
 /* Generic bus chip selects */
-#define IDE_CS          4
-#define PCMCIA_CS       6
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
 
-/* GPIOs */
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
 #define K_GPIO_GB_IDE   4
 #define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
-#define K_GPIO_PC_READY 9
-#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
-
 #endif
 
-#ifdef __ASSEMBLY__
-#define setleds(t0,t1,c0,c1,c2,c3) \
-	li	t0, (LED_BASE_ADDR|0xa0000000); \
-	li	t1, c0; \
-	sb	t1, 0x18(t0); \
-	li	t1, c1; \
-	sb	t1, 0x10(t0); \
-	li	t1, c2; \
-	sb	t1, 0x08(t0); \
-	li	t1, c3; \
-	sb	t1, 0x00(t0)
-#else
-void swarm_setup(void);
-void setleds(char *str);
-
-#define AT_spin \
-	__asm__ __volatile__ (		\
-		".set noat\n"		\
-		"li $at, 0\n"		\
-		"1: beqz $at, 1b\n"	\
-		".set at\n"		\
-		)
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
 #endif
 
 #endif /* __ASM_SIBYTE_SWARM_H */