patch-2.4.22 linux-2.4.22/include/asm-mips/sgi/sgimc.h
Next file: linux-2.4.22/include/asm-mips/sgi/sgint23.h
Previous file: linux-2.4.22/include/asm-mips/sgi/sgihpc.h
Back to the patch index
Back to the overall index
- Lines: 229
- Date:
1969-12-31 16:00:00.000000000 -0800
- Orig file:
linux-2.4.21/include/asm-mips/sgi/sgimc.h
- Orig date:
2002-08-02 17:39:45.000000000 -0700
diff -urN linux-2.4.21/include/asm-mips/sgi/sgimc.h linux-2.4.22/include/asm-mips/sgi/sgimc.h
@@ -1,228 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * sgimc.h: Definitions for memory controller hardware found on
- * SGI IP20, IP22, IP26, and IP28 machines.
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1999 Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef _ASM_SGI_SGIMC_H
-#define _ASM_SGI_SGIMC_H
-
-struct sgimc_misc_ctrl {
- u32 _unused1;
- volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
-#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
-#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
-#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
-#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
-#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
-#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
-#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
-#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
-#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
-#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
-#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
-#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
-#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
-#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
-#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
-#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
-#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
-#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
-#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
-
- u32 _unused2;
- volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
-#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
-#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
-#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
-#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
-#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
-
- u32 _unused3;
- volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
-
- u32 _unused4;
- volatile u32 systemid; /* MC system ID register, readonly */
-#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
-#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
-
- u32 _unused5[3];
- volatile u32 divider; /* Divider reg for RPSS */
-
- u32 _unused6;
- volatile unsigned char eeprom; /* EEPROM byte reg for r4k */
-#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
-#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
-#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
-#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
-#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
-
- unsigned char _unused7[3];
- u32 _unused8[3];
- volatile unsigned short rcntpre; /* Preload refresh counter */
-
- unsigned short _unused9;
- u32 _unused9a;
- volatile unsigned short rcounter; /* Readonly refresh counter */
-
- unsigned short _unused10;
- u32 _unused11[13];
- volatile u32 gioparm; /* Parameter word for GIO64 */
-#define SGIMC_GIOPARM_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
-#define SGIMC_GIOPARM_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
-#define SGIMC_GIOPARM_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
-#define SGIMC_GIOPARM_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
-#define SGIMC_GIOPARM_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
-#define SGIMC_GIOPARM_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
-#define SGIMC_GIOPARM_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
-#define SGIMC_GIOPARM_MASTERGFX 0x00000800 /* GFX can act as a bus master */
-#define SGIMC_GIOPARM_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
-#define SGIMC_GIOPARM_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
-#define SGIMC_GIOPARM_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
-#define SGIMC_GIOPARM_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
-
- u32 _unused13;
- volatile unsigned short cputp; /* CPU bus arb time period */
-
- unsigned short _unused14;
- u32 _unused15[3];
- volatile unsigned short lbursttp; /* Time period for long bursts */
-
- unsigned short _unused16;
- u32 _unused17[9];
- volatile u32 mconfig0; /* Memory config register zero */
- u32 _unused18;
- volatile u32 mconfig1; /* Memory config register one */
-
- /* These defines apply to both mconfig registers above. */
-#define SGIMC_MCONFIG_FOURMB 0x00000000 /* Physical ram = 4megs */
-#define SGIMC_MCONFIG_EIGHTMB 0x00000100 /* Physical ram = 8megs */
-#define SGIMC_MCONFIG_SXTEENMB 0x00000300 /* Physical ram = 16megs */
-#define SGIMC_MCONFIG_TTWOMB 0x00000700 /* Physical ram = 32megs */
-#define SGIMC_MCONFIG_SFOURMB 0x00000f00 /* Physical ram = 64megs */
-#define SGIMC_MCONFIG_OTEIGHTMB 0x00001f00 /* Physical ram = 128megs */
-#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
-
- u32 _unused19;
- volatile u32 cmacc; /* Mem access config for CPU */
- u32 _unused20;
- volatile u32 gmacc; /* Mem access config for GIO */
-
- /* This define applies to both cmacc and gmacc registers above. */
-#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
-
- /* Error address/status regs from GIO and CPU perspectives. */
- u32 _unused21;
- volatile u32 cerr; /* Error address reg for CPU */
- u32 _unused22;
- volatile u32 cstat; /* Status reg for CPU */
- u32 _unused23;
- volatile u32 gerr; /* Error address reg for GIO */
- u32 _unused24;
- volatile u32 gstat; /* Status reg for GIO */
-
- /* Special hard bus locking registers. */
- u32 _unused25;
- volatile unsigned char syssembit; /* Uni-bit system semaphore */
- unsigned char _unused26[3];
- u32 _unused27;
- volatile unsigned char mlock; /* Global GIO memory access lock */
- unsigned char _unused28[3];
- u32 _unused29;
- volatile unsigned char elock; /* Locks EISA from GIO accesses */
-
- /* GIO dma control registers. */
- unsigned char _unused30[3];
- u32 _unused31[14];
- volatile u32 gio_dma_trans;/* DMA mask to translation GIO addrs */
- u32 _unused32;
- volatile u32 gio_dma_sbits;/* DMA GIO addr substitution bits */
- u32 _unused33;
- volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
- u32 _unused34;
- volatile u32 dma_ctrl; /* Main DMA control reg */
-
- /* DMA TLB entry 0 */
- u32 _unused35;
- volatile u32 dtlb_hi0;
- u32 _unused36;
- volatile u32 dtlb_lo0;
-
- /* DMA TLB entry 1 */
- u32 _unused37;
- volatile u32 dtlb_hi1;
- u32 _unused38;
- volatile u32 dtlb_lo1;
-
- /* DMA TLB entry 2 */
- u32 _unused39;
- volatile u32 dtlb_hi2;
- u32 _unused40;
- volatile u32 dtlb_lo2;
-
- /* DMA TLB entry 3 */
- u32 _unused41;
- volatile u32 dtlb_hi3;
- u32 _unused42;
- volatile u32 dtlb_lo3;
-};
-
-/* MC misc control registers live at physical 0x1fa00000. */
-extern struct sgimc_misc_ctrl *mcmisc_regs;
-extern u32 *rpsscounter; /* Chirps at 100ns */
-
-struct sgimc_dma_ctrl {
- u32 _unused1;
- volatile u32 maddronly; /* Address DMA goes at */
- u32 _unused2;
- volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
- u32 _unused3;
- volatile u32 dmasz; /* DMA count */
- u32 _unused4;
- volatile u32 ssize; /* DMA stride size */
- u32 _unused5;
- volatile u32 gmaddronly; /* Set GIO DMA but do not start trans */
- u32 _unused6;
- volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
- u32 _unused7;
- volatile u32 dmamode; /* DMA mode config bit settings */
- u32 _unused8;
- volatile u32 dmaccount; /* Zoom and byte count for DMA */
- u32 _unused9;
- volatile u32 dmastart; /* Pedal to the metal. */
- u32 _unused10;
- volatile u32 dmarunning; /* DMA op is in progress */
- u32 _unused11;
-
- /* Set dma addr, defaults, and kick it */
- volatile u32 maddr_defl_go; /* go go go! -lm */
-};
-
-/* MC controller dma regs live at physical 0x1fa02000. */
-extern struct sgimc_dma_ctrl *dmactrlregs;
-
-/* Base location of the two ram banks found in IP2[0268] machines. */
-#define SGIMC_SEG0_BADDR 0x08000000
-#define SGIMC_SEG1_BADDR 0x20000000
-
-/* Maximum size of the above banks are per machine. */
-extern u32 sgimc_seg0_size, sgimc_seg1_size;
-#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
-#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
-#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
-
-extern void sgimc_init(void);
-
-#endif /* _ASM_SGI_SGIMC_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)