patch-2.4.23 linux-2.4.23/drivers/usb/host/hc_sl811_rh.c

Next file: linux-2.4.23/drivers/usb/host/sl811.c
Previous file: linux-2.4.23/drivers/usb/host/hc_sl811.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.22/drivers/usb/host/hc_sl811_rh.c linux-2.4.23/drivers/usb/host/hc_sl811_rh.c
@@ -0,0 +1,536 @@
+
+/*-------------------------------------------------------------------------*/
+/*-------------------------------------------------------------------------*
+ * SL811HS virtual root hub
+ *  
+ * based on usb-ohci.c by R. Weissgaerber et al.
+ *-------------------------------------------------------------------------*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#undef DEBUG
+#endif
+static __u32 getPortStatusAndChange (hci_t * hci);
+static void setPortStatus (hci_t * hci, __u16 bitPos);
+static void setPortChange (hci_t * hci, __u16 bitPos);
+static void clrPortStatus (hci_t * hci, __u16 bitPos);
+static void clrPortChange (hci_t * hci, __u16 bitPos);
+static int USBReset (hci_t * hci);
+static int cc_to_error (int cc);
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub 
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] = {
+	0x12,			/*  __u8  bLength; */
+	0x01,			/*  __u8  bDescriptorType; Device */
+	0x10,			/*  __u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,			/*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,			/*  __u8  bDeviceSubClass; */
+	0x00,			/*  __u8  bDeviceProtocol; */
+	0x08,			/*  __u8  bMaxPacketSize0; 8 Bytes */
+	0x00,			/*  __u16 idVendor; */
+	0x00,
+	0x00,			/*  __u16 idProduct; */
+	0x00,
+	0x00,			/*  __u16 bcdDevice; */
+	0x00,
+	0x00,			/*  __u8  iManufacturer; */
+	0x02,			/*  __u8  iProduct; */
+	0x01,			/*  __u8  iSerialNumber; */
+	0x01			/*  __u8  bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] = {
+	0x09,			/*  __u8  bLength; */
+	0x02,			/*  __u8  bDescriptorType; Configuration */
+	0x19,			/*  __u16 wTotalLength; */
+	0x00,
+	0x01,			/*  __u8  bNumInterfaces; */
+	0x01,			/*  __u8  bConfigurationValue; */
+	0x00,			/*  __u8  iConfiguration; */
+	0x40,			/*  __u8  bmAttributes; 
+				   Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 
+				   4..0: resvd */
+	0x00,			/*  __u8  MaxPower; */
+
+	/* interface */
+	0x09,			/*  __u8  if_bLength; */
+	0x04,			/*  __u8  if_bDescriptorType; Interface */
+	0x00,			/*  __u8  if_bInterfaceNumber; */
+	0x00,			/*  __u8  if_bAlternateSetting; */
+	0x01,			/*  __u8  if_bNumEndpoints; */
+	0x09,			/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,			/*  __u8  if_bInterfaceSubClass; */
+	0x00,			/*  __u8  if_bInterfaceProtocol; */
+	0x00,			/*  __u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,			/*  __u8  ep_bLength; */
+	0x05,			/*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,			/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,			/*  __u8  ep_bmAttributes; Interrupt */
+	0x02,			/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x00,
+	0xff			/*  __u8  ep_bInterval; 255 ms */
+};
+
+/* [Hub class-specific descriptor is constructed dynamically] */
+/* copied from "dynamic source". (hne) */
+static __u8 root_hub_hub_des[] =
+{
+	0x09,			/*  __u8  bLength; */
+	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	0x01,			/*  __u8  bNbrPorts; */
+	0x00,			/* __u16  wHubCharacteristics; */
+	0x00,
+	0x50,			/*  __u8  bPwrOn2pwrGood; 100ms for port reset */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0xfc, /* ??? HNE */	/*  __u8  DeviceRemovable; *** 7 Ports max *** */ /* which port is attachable (HNE) */
+	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+
+/***************************************************************************
+ * Function Name : rh_send_irq
+ * 
+ * This function examine the port change in the virtual root hub.
+ * 
+ * Note: This function assumes only one port exist in the root hub.
+ *
+ * Input:  hci = data structure for the host controller
+ *         rh_data = The pointer to port change data
+ *         rh_len = length of the data in bytes
+ *
+ * Return: length of data  
+ **************************************************************************/
+static int rh_send_irq (hci_t * hci, void *rh_data, int rh_len)
+{
+	int num_ports;
+	int i;
+	int ret;
+	int len;
+	__u8 data[8];
+
+	DBGFUNC ("enter rh_send_irq: \n");
+
+	/* Assuming the root hub has one port.  This value need to change if
+	 * there are more than one port for the root hub
+	 */
+
+	num_ports = 1;
+
+	/* The root hub status is not implemented, it basically has two fields:
+	 *     -- Local Power Status
+	 *     -- Over Current Indicator
+	 *     -- Local Power Change
+	 *     -- Over Current Indicator
+	 *
+	 * Right now, It is assume the power is good and no changes 
+	 */
+
+	*(__u8 *) data = 0;
+
+	ret = *(__u8 *) data;
+
+	/* Has the port status change within the root hub: It checks for
+	 *      -- Port Connect Status change
+	 *      -- Port Enable Change
+	 */
+
+	for (i = 0; i < num_ports; i++) {
+		*(__u8 *) (data + (i + 1) / 8) |=
+		    (((getPortStatusAndChange (hci) >> 16) & (PORT_CONNECT_STAT | PORT_ENABLE_STAT)) ? 1 : 0) << ((i + 1) % 8);
+		ret += *(__u8 *) (data + (i + 1) / 8);
+
+		/* After the port change is read, it should be reset so the next time 
+		 * is it doesn't trigger a change again */
+
+	}
+	len = i / 8 + 1;
+
+	if (ret > 0) {
+		memcpy (rh_data, data, min (len, (int)min (rh_len, (int)sizeof (data))));
+		return len;
+	}
+	return 0;
+}
+
+/***************************************************************************
+ * Function Name : rh_int_timer_do
+ * 
+ * This function is called when the timer expires.  It gets the the port 
+ * change data and pass along to the upper protocol.
+ * 
+ * Note:  The virtual root hub interrupt pipe are polled by the timer
+ *        every "interval" ms
+ *
+ * Input:  ptr = ptr to the urb
+ *
+ * Return: none  
+ **************************************************************************/
+static void rh_int_timer_do (unsigned long ptr)
+{
+	int len;
+	struct urb *urb = (struct urb *) ptr;
+	hci_t *hci = urb->dev->bus->hcpriv;
+
+	DBGFUNC ("enter rh_int_timer_do\n");
+
+	if (hci->rh.send) {
+		len = rh_send_irq (hci, urb->transfer_buffer,
+				   urb->transfer_buffer_length);
+		if (len > 0) {
+			urb->actual_length = len;
+			if (urb_debug == 2)
+				urb_print (urb, "RET-t(rh)",
+					   usb_pipeout (urb->pipe));
+
+			if (urb->complete) {
+				urb->complete (urb);
+			}
+		}
+	}
+
+	/* re-activate the timer */
+	rh_init_int_timer (urb);
+}
+
+/***************************************************************************
+ * Function Name : rh_init_int_timer
+ * 
+ * This function creates a timer that act as interrupt pipe in the
+ * virtual hub.   
+ * 
+ * Note:  The virtual root hub's interrupt pipe are polled by the timer
+ *        every "interval" ms
+ *
+ * Input: urb = USB request block 
+ *
+ * Return: 0  
+ **************************************************************************/
+static int rh_init_int_timer (struct urb * urb)
+{
+	hci_t *hci = urb->dev->bus->hcpriv;
+	hci->rh.interval = urb->interval;
+
+	init_timer (&hci->rh.rh_int_timer);
+	hci->rh.rh_int_timer.function = rh_int_timer_do;
+	hci->rh.rh_int_timer.data = (unsigned long) urb;
+	hci->rh.rh_int_timer.expires = jiffies + (HZ * (urb->interval < 30 ? 30 : urb->interval)) / 1000;
+	add_timer (&hci->rh.rh_int_timer);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* helper macro */
+#define OK(x) 			len = (x); break
+
+/***************************************************************************
+ * Function Name : rh_submit_urb
+ * 
+ * This function handles all USB request to the the virtual root hub
+ * 
+ * Input: urb = USB request block 
+ *
+ * Return: 0  
+ **************************************************************************/
+static int rh_submit_urb (struct urb * urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	hci_t *hci = usb_dev->bus->hcpriv;
+	unsigned int pipe = urb->pipe;
+	struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
+	void *data = urb->transfer_buffer;
+	int leni = urb->transfer_buffer_length;
+	int len = 0;
+	int status = TD_CC_NOERROR;
+	__u32 datab[4];
+	__u8 *data_buf = (__u8 *) datab;
+
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+
+	DBGFUNC ("enter rh_submit_urb\n");
+	if (usb_pipeint (pipe)) {
+		hci->rh.urb = urb;
+		hci->rh.send = 1;
+		hci->rh.interval = urb->interval;
+		rh_init_int_timer (urb);
+		urb->status = cc_to_error (TD_CC_NOERROR);
+
+		return 0;
+	}
+
+	bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8);
+	wValue = le16_to_cpu (cmd->wValue);
+	wIndex = le16_to_cpu (cmd->wIndex);
+	wLength = le16_to_cpu (cmd->wLength);
+
+	DBG ("rh_submit_urb, req = %d(%x) len=%d",
+	     bmRType_bReq, bmRType_bReq, wLength);
+
+	switch (bmRType_bReq) {
+		/* Request Destination:
+		   without flags: Device, 
+		   RH_INTERFACE: interface, 
+		   RH_ENDPOINT: endpoint,
+		   RH_CLASS means HUB here, 
+		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here 
+		 */
+
+	case RH_GET_STATUS:
+		*(__u16 *) data_buf = cpu_to_le16 (1);
+		OK (2);
+
+	case RH_GET_STATUS | RH_INTERFACE:
+		*(__u16 *) data_buf = cpu_to_le16 (0);
+		OK (2);
+
+	case RH_GET_STATUS | RH_ENDPOINT:
+		*(__u16 *) data_buf = cpu_to_le16 (0);
+		OK (2);
+
+	case RH_GET_STATUS | RH_CLASS:
+		*(__u32 *) data_buf = cpu_to_le32 (0);
+		OK (4);
+
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+		*(__u32 *) data_buf =
+		    cpu_to_le32 (getPortStatusAndChange (hci));
+		OK (4);
+
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+		switch (wValue) {
+		case (RH_ENDPOINT_STALL):
+			OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		switch (wValue) {
+		case RH_C_HUB_LOCAL_POWER:
+			OK (0);
+
+		case (RH_C_HUB_OVER_CURRENT):
+			/* Over Current Not Implemented */
+			OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case (RH_PORT_ENABLE):
+			clrPortStatus (hci, PORT_ENABLE_STAT);
+			OK (0);
+
+		case (RH_PORT_SUSPEND):
+			clrPortStatus (hci, PORT_SUSPEND_STAT);
+			OK (0);
+
+		case (RH_PORT_POWER):
+			clrPortStatus (hci, PORT_POWER_STAT);
+			OK (0);
+
+		case (RH_C_PORT_CONNECTION):
+			clrPortChange (hci, PORT_CONNECT_STAT);
+			OK (0);
+
+		case (RH_C_PORT_ENABLE):
+			clrPortChange (hci, PORT_ENABLE_STAT);
+			OK (0);
+
+		case (RH_C_PORT_SUSPEND):
+			clrPortChange (hci, PORT_SUSPEND_STAT);
+			OK (0);
+
+		case (RH_C_PORT_OVER_CURRENT):
+			clrPortChange (hci, PORT_OVER_CURRENT_STAT);
+			OK (0);
+
+		case (RH_C_PORT_RESET):
+			clrPortChange (hci, PORT_RESET_STAT);
+			OK (0);
+		}
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case (RH_PORT_SUSPEND):
+			setPortStatus (hci, PORT_SUSPEND_STAT);
+			OK (0);
+
+		case (RH_PORT_RESET):
+			setPortStatus (hci, PORT_RESET_STAT);
+			// USBReset(hci);
+			clrPortChange (hci,
+				       PORT_CONNECT_CHANGE | PORT_ENABLE_CHANGE
+				       | PORT_SUSPEND_CHANGE |
+				       PORT_OVER_CURRENT_CHANGE);
+			setPortChange (hci, PORT_RESET_CHANGE);
+			clrPortStatus (hci, PORT_RESET_STAT);
+			setPortStatus (hci, PORT_ENABLE_STAT);
+
+			OK (0);
+
+		case (RH_PORT_POWER):
+			setPortStatus (hci, PORT_POWER_STAT);
+			OK (0);
+
+		case (RH_PORT_ENABLE):
+			setPortStatus (hci, PORT_ENABLE_STAT);
+			OK (0);
+		}
+		break;
+
+	case RH_SET_ADDRESS:
+		hci->rh.devnum = wValue;
+		OK (0);
+
+	case RH_GET_DESCRIPTOR:
+		DBGVERBOSE ("rh_submit_urb: RH_GET_DESCRIPTOR, wValue = 0x%x\n", wValue);
+		switch ((wValue & 0xff00) >> 8) {
+		case (0x01):	/* device descriptor */
+			len = min (leni, min ((__u16)sizeof (root_hub_dev_des), wLength));
+			data_buf = root_hub_dev_des;
+			OK (len);
+
+		case (0x02):	/* configuration descriptor */
+			len = min (leni, min ((__u16)sizeof (root_hub_config_des), wLength));
+			data_buf = root_hub_config_des;
+			OK (len);
+
+		case (0x03):	/* string descriptors */
+			len = usb_root_hub_string (wValue & 0xff, (int) (long) 0,
+						   "SL811HS", data, wLength);
+			if (len > 0) {
+				data_buf = data;
+				OK (min (leni, len));
+			}
+
+		default:
+			status = SL11H_STATMASK_STALL;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+		len = min_t(unsigned int, leni,
+			  min_t(unsigned int, sizeof (root_hub_hub_des), wLength));
+		memcpy (data_buf, root_hub_hub_des, len);
+		OK (len);
+
+	case RH_GET_CONFIGURATION:
+		*(__u8 *) data_buf = 0x01;
+		OK (1);
+
+	case RH_SET_CONFIGURATION:
+		OK (0);
+
+	default:
+		DBGERR ("unsupported root hub command");
+		status = SL11H_STATMASK_STALL;
+	}
+
+	len = min (len, leni);
+	if (data != data_buf)
+		memcpy (data, data_buf, len);
+	urb->actual_length = len;
+	urb->status = cc_to_error (status);
+
+	urb->hcpriv = NULL;
+	urb->dev = NULL;
+	if (urb->complete) {
+		urb->complete (urb);
+	}
+
+	return 0;
+}
+
+/***************************************************************************
+ * Function Name : rh_unlink_urb
+ * 
+ * This function unlinks the URB 
+ * 
+ * Input: urb = USB request block 
+ *
+ * Return: 0  
+ **************************************************************************/
+static int rh_unlink_urb (struct urb * urb)
+{
+	hci_t *hci = urb->dev->bus->hcpriv;
+
+	DBGFUNC ("enter rh_unlink_urb\n");
+	if (hci->rh.urb == urb) {
+		hci->rh.send = 0;
+		del_timer (&hci->rh.rh_int_timer);
+		hci->rh.urb = NULL;
+
+		urb->hcpriv = NULL;
+		/* ---
+		usb_put_dev (urb->dev);
+
+		Can not found this function, copy from old source and other source.
+		usbnet.c us this to. Its a macro to usb_dec_dev_use. (hne)
+		--- */
+		usb_dec_dev_use(urb->dev);
+		urb->dev = NULL;
+		if (urb->transfer_flags & USB_ASYNC_UNLINK) {
+			urb->status = -ECONNRESET;
+			if (urb->complete) {
+				urb->complete (urb);
+			}
+		} else
+			urb->status = -ENOENT;
+	}
+	return 0;
+}
+
+/***************************************************************************
+ * Function Name : rh_connect_rh
+ * 
+ * This function connect the virtual root hub to the USB stack 
+ * 
+ * Input: urb = USB request block 
+ *
+ * Return: 0  
+ **************************************************************************/
+static int rh_connect_rh (hci_t * hci)
+{
+	struct usb_device *usb_dev;
+
+	hci->rh.devnum = 0;
+	usb_dev = usb_alloc_dev (NULL, hci->bus);
+	if (!usb_dev)
+		return -ENOMEM;
+
+	hci->bus->root_hub = usb_dev;
+	usb_connect (usb_dev);
+	if (usb_new_device (usb_dev) != 0) {
+		usb_free_dev (usb_dev);
+		return -ENODEV;
+	}
+
+	return 0;
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)