ChangeSet@1.1398, 2003-09-22 22:35:41-07:00, kevcorry@us.ibm.com [PATCH] dm: Support arbitrary number of target params Support an arbitrary number of target parameters. [Alasdair Kergon] ChangeSet@1.1397, 2003-09-22 22:35:33-07:00, kevcorry@us.ibm.com [PATCH] dm: Message fix in dm-linear Fix error message when linear targets gets handed more than 2 arguments. [Alasdair Kergon] ChangeSet@1.1396, 2003-09-22 22:35:25-07:00, kevcorry@us.ibm.com [PATCH] dm: Return table status for dev_wait dev_wait was meant to return table status not dev status. [Alasdair Kergon] ChangeSet@1.1395, 2003-09-22 22:35:16-07:00, kevcorry@us.ibm.com [PATCH] dm: Move retrieve_status function Move retrieve_status up so dev_wait() can use it. ChangeSet@1.1394, 2003-09-22 22:35:08-07:00, kevcorry@us.ibm.com [PATCH] dm: Drop extra table ref-count When multiple load ioctls are issued the reference count on older 'new_tables' wasn't being dropped. [Christophe Saout] ChangeSet@1.1393, 2003-09-22 22:35:00-07:00, kevcorry@us.ibm.com [PATCH] dm: Use new format_dev_t macro Use the format_dev_t function for target status functions. ChangeSet@1.1392, 2003-09-22 19:23:13-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: nfsdv4 byte range locking - LOCKU From: "William A.(Andy) Adamson" This implments the LOCKU operation. These all pass the connectathon lock test suite against the solaris nfsv4 client. ChangeSet@1.1391, 2003-09-22 19:23:04-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: nfsdv4 byte range locking - LOCKT From: "William A.(Andy) Adamson" This implements the LOCKT operation. ChangeSet@1.1390, 2003-09-22 19:22:55-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: nfsd byte range locking - LOCK From: "William A.(Andy) Adamson" This implements the nfsv4 LOCK operation. ChangeSet@1.1389, 2003-09-22 19:22:47-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: nfsdv4 byte range locking - prepatation From: "William A.(Andy) Adamson" This renames some structures and functions that can be used for byte-range locking as well as for the exiting open share locks, and does some cleanup. ChangeSet@1.1388, 2003-09-22 19:22:37-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: idempotent replay cache for OPEN state This implements the idempotent replay cache need for NFSv4 OPEN state. each state owner (open owner or lock owner) is required to store the last sequence number mutating operation, and retransmit it when replayed sequence number is presented for the operation. I've implemented the cache as a static buffer of size 112 bytes (NFSD4_REPLAY_ISIZE) which is large enough to hold the OPEN, the largest of the sequence mutation operations. This implements the cache for OPEN, OPEN_CONFIRM, OPEN_DOWNGRADE, and CLOSE. LOCK and UNLOCK will be added when byte-range locking is done (soon!). ChangeSet@1.1387, 2003-09-22 19:22:28-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: NFS4XDR get rid of warning There is a warning because of calling return with an argument on a void function. The root cause is putting a return statement in a macro (evil side effect). Change ENCODE_SEQID_OP_TAIL to be a more proper macro, change all calling functions to return void. ChangeSet@1.1386, 2003-09-22 19:22:18-07:00, neilb@cse.unsw.edu.au [PATCH] knfsd: Fix cmsg setup for sock_sendmsg in svc_sendto From: Trond Myklebust ... see the code in ip_sockglue.c + the macros in socket.h.... AFAICS the control messages have wierd alignment requirements. ChangeSet@1.1385, 2003-09-22 19:22:08-07:00, neilb@cse.unsw.edu.au [PATCH] md: change 'or' to 'plus' in raid1 Silly typo. ChangeSet@1.1384, 2003-09-22 19:22:00-07:00, neilb@cse.unsw.edu.au [PATCH] md: MODULE_ALIAS for md From: Rusty Russell ChangeSet@1.1383, 2003-09-22 19:21:53-07:00, neilb@cse.unsw.edu.au [PATCH] md: Don't setup make_request_fn for md array until *after* it has been started Also revert to md_fail_request before stopping an array. The ->stop method can never fail, so there is not point checking it. ChangeSet@1.1379.1.1, 2003-09-22 16:14:03-07:00, chrisw@osdl.org [PATCH] Memory leak in ixj_pcmcia driver Found by checker (David Yu Chen @Stanford) ChangeSet@1.1381, 2003-09-22 16:03:26-07:00, greg@kroah.com [PATCH] I2C: remove I2C_VERSION and I2C_DATE as they make no sense in the kernel tree. ChangeSet@1.1315.1.26, 2003-09-22 15:24:36-07:00, arvidjaar@mail.ru [PATCH] I2C: sysfs sensor nameing inconsistency > That's what you are going to have to set the name file to in the > i2c_client structure, much like your patch did. Then look at the > different name files in each device directory to see what kind of device > it is (chip, subclient, etc.) OK attached patch sets all names to just chip name for chips themselves and "chipname subclient" when subclient ios registered. ChangeSet@1.1315.1.25, 2003-09-22 15:11:24-07:00, greg@kroah.com [PATCH] I2C: remove check_region usage and warning from i2c-sensor ChangeSet@1.1315.1.24, 2003-09-22 15:00:04-07:00, greg@kroah.com [PATCH] I2C: move the remaining i2c bus drivers to drivers/i2c/busses ChangeSet@1.1315.1.23, 2003-09-22 14:21:09-07:00, greg@kroah.com [PATCH] I2C: move the scx200* drivers to drivers/i2c/busses ChangeSet@1.1315.1.22, 2003-09-22 14:09:17-07:00, greg@kroah.com [PATCH] I2C: move i2c-velleman driver to drivers/i2c/busses ChangeSet@1.1315.1.21, 2003-09-22 13:57:44-07:00, greg@kroah.com I2C: move i2c-elektor.c driver to drivers/i2c/busses/ ChangeSet@1.1315.1.20, 2003-09-22 13:44:13-07:00, greg@kroah.com [PATCH] I2C: clean up the i2c-elv.c driver a bit ChangeSet@1.1315.1.19, 2003-09-22 13:36:52-07:00, greg@kroah.com [PATCH] I2C: move i2c-elv.c driver to drivers/i2c/busses ChangeSet@1.1315.1.18, 2003-09-22 13:30:23-07:00, greg@kroah.com [PATCH] I2C: clean up i2c-philips-par.c driver a bit Fix bug when registering the i2c_adap as the structure was not set to 0. ChangeSet@1.1379, 2003-09-22 13:23:42-07:00, albert.cahalan@ccur.com [PATCH] shared signals require shared VM Elimination of this nonsense allows for the assumption that a task group shares VM. This lets procps run faster. ChangeSet@1.1315.1.17, 2003-09-22 13:20:35-07:00, greg@kroah.com [PATCH] I2C: move the i2c-philips-par driver to drivers/i2c/busses ChangeSet@1.1315.1.16, 2003-09-22 13:10:15-07:00, greg@kroah.com [PATCH] I2C: fix up dependancies in the i2c/busses/Kconfig file ChangeSet@1.1315.1.15, 2003-09-22 13:06:04-07:00, greg@kroah.com [PATCH] I2C: clean up i2c-prosavage.c driver Remove direct memory accesses and link up device in the proper place in the sysfs tree. ChangeSet@1.1315.1.14, 2003-09-22 12:46:46-07:00, greg@kroah.com [PATCH] I2C: move i2c-prosavage.c driver to drivers/i2c/busses where it belongs. ChangeSet@1.1378, 2003-09-22 12:35:00-07:00, akpm@osdl.org [PATCH] smbfs NLS fix strut nls_table was changed, but smbfs uses it and was not updated. ChangeSet@1.1377, 2003-09-22 12:34:50-07:00, akpm@osdl.org [PATCH] misc fixes - bio_release_pages() should have file-local scope. - don't use spaces in slab names in device mapper, enforce this henceforth in kmem_cache_create(). - Fix alpha header leftover from cpumask_t conversion ChangeSet@1.1376, 2003-09-22 12:34:42-07:00, akpm@osdl.org [PATCH] ia64 sched_clock() implementation. From David M-T. ChangeSet@1.1315.1.13, 2003-09-22 12:26:49-07:00, greg@kroah.com I2C: clean up the drivers/i2c/Kconfig file ChangeSet@1.1315.1.12, 2003-09-22 11:42:40-07:00, greg@kroah.com I2C: clean up the i2c chips Kconfig logic and help information ChangeSet@1.1315.1.11, 2003-09-22 11:15:16-07:00, greg@kroah.com [PATCH] I2C: add the i2c-voodoo3 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1315.1.10, 2003-09-22 11:05:20-07:00, greg@kroah.com [PATCH] I2C: add the i2c-savage4 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1315.1.9, 2003-09-22 11:03:30-07:00, greg@kroah.com [PATCH] I2C: add the i2c-i810 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1375, 2003-09-22 08:37:14-07:00, torvalds@home.osdl.org Merge bk://linux-sam.bkbits.net/kbuild into home.osdl.org:/home/torvalds/v2.5/linux ChangeSet@1.1371, 2003-09-21 20:09:37-07:00, davem@nuts.ninka.net Merge bk://kernel.bkbits.net/acme/llc-2.6 into nuts.ninka.net:/disk1/davem/BK/net-2.5 ChangeSet@1.1320.2.44, 2003-09-21 19:40:40-07:00, albert@users.sourceforge.net [PATCH] use CLONE_KERNEL This uses CLONE_KERNEL in place of the individual flags, only changing the places where it is an exact match. I strongly suspect that CLONE_KERNEL ought to be used in many more places, but they require a more careful examination. ChangeSet@1.1320.1.23, 2003-09-21 23:39:17-03:00, acme@conectiva.com.br o LLC: remove unneeded EXPORT_SYMBOLs from llc_sap Now all is in llc2.ko, so no need for exporting those symbols. Also llc_build_and_send_ui_pkt is now in llc_output.c, where it is being exported. ChangeSet@1.1370, 2003-09-21 19:02:22-07:00, davem@nuts.ninka.net [LLC]: llc_core.c needs linux/init.h ChangeSet@1.1320.2.43, 2003-09-21 19:00:18-07:00, torvalds@home.osdl.org Remove incorrect and unnecessary definition of "errno" that causes link-time duplicate symbol errors. ChangeSet@1.1369, 2003-09-21 18:24:52-07:00, willy@debian.org [NETFILTER]: Use net/checksum.h instead of asm/checksum.h ChangeSet@1.1368, 2003-09-21 18:23:42-07:00, chas@cmf.nrl.navy.mil [ATM]: [zatm] Correct way to prevent module unload (from shemminger@osdl.org). ChangeSet@1.1367, 2003-09-21 18:22:48-07:00, chas@cmf.nrl.navy.mil [ATM]: [uPD98402] Exported symbols should not be marked __init. ChangeSet@1.1366, 2003-09-21 18:22:11-07:00, chas@cmf.nrl.navy.mil [ATM]: [uPD98402] Convert to new-style module. ChangeSet@1.1365, 2003-09-21 18:21:35-07:00, chas@cmf.nrl.navy.mil [ATM]: [lanai] Get rid of MOD_INC/MOD_DEC (from shemminger@osdl.org). ChangeSet@1.1364, 2003-09-21 18:20:01-07:00, chas@cmf.nrl.navy.mil [ATM]: [idt77252] Get rid of MOD_INC/MOD_DEC. ChangeSet@1.1363, 2003-09-21 18:19:20-07:00, chas@cmf.nrl.navy.mil [ATM]: [firestream] Allow module refcounting. ChangeSet@1.1362, 2003-09-21 18:18:38-07:00, chas@cmf.nrl.navy.mil [ATM]: [eni] Correct way to prevent module unload (from shemminger@osdl.org). ChangeSet@1.1361, 2003-09-21 18:17:41-07:00, vinay.nallamothu@gsecone.com [NETROM]: Timer code cleanup. ChangeSet@1.1359, 2003-09-21 18:10:17-07:00, wensong@linux-vs.org [IPVS]: Make __ip_vs_svc_lock local and use __user tags. ChangeSet@1.1358, 2003-09-21 18:05:09-07:00, bdschuym@pandora.be [NETFILTER]: Fix parisc64 alignment problems in ipt_physdev.c ChangeSet@1.1357, 2003-09-21 18:01:18-07:00, davem@nuts.ninka.net Merge nuts.ninka.net:/disk1/davem/BK/network-2.5 into nuts.ninka.net:/disk1/davem/BK/net-2.5 ChangeSet@1.1320.15.55, 2003-09-21 17:09:46-07:00, albert@users.sourceforge.net [PATCH] fix CONFIG_SECURE trouble in thread-aware procfs This fixes the thread-aware /proc for CONFIG_SECURE. ChangeSet@1.1320.15.54, 2003-09-21 16:43:09-07:00, rddunlap@osdl.org [PATCH] floppy I/O error handling => Oops bad_flp_intr() in floppy.c can cause an Oops if the I/O request is freed but still points into the I/O request block. Get the error count out of the request block before ending the IO. bad_flp_intr() oopsen reports: Andrey: http://marc.theaimsgroup.com/?l=linux-kernel&m=105837886921297&w=2 John: http://marc.theaimsgroup.com/?l=linux-kernel&m=106303650007125&w=2 Barry: http://bugme.osdl.org/show_bug.cgi?id=1033 ChangeSet@1.1320.15.53, 2003-09-21 15:43:37-07:00, akpm@osdl.org [PATCH] fix cciss memory leaks From: Felipe W Damasio Fix a few error-path leaks in the cciss block driver. Bug found by smatch checker. ChangeSet@1.1320.15.52, 2003-09-21 15:43:28-07:00, akpm@osdl.org [PATCH] mlock error handling fix make_pages_present() can fail: propagate that failure back. Spotted by Bill Irwin. ChangeSet@1.1320.15.51, 2003-09-21 15:43:19-07:00, akpm@osdl.org [PATCH] rio.c: remove TWO_ZERO From: Adrian Bunk Three drivers under drivers/char/ in 2.5.72 use TWO_ZERO for compatibility code with ancient 2.0 kernels. The patch below removes this #ifdef'd code. ChangeSet@1.1320.15.50, 2003-09-21 15:43:10-07:00, akpm@osdl.org [PATCH] move some more initializations out of drivers/char/mem.c From: Christoph Hellwig keeping init order the same.. ChangeSet@1.1320.15.49, 2003-09-21 15:43:01-07:00, akpm@osdl.org [PATCH] kill superflous kdev_t.h inclusions From: Christoph Hellwig now that kdev_t is gone very few places needs this still, the only header of those beeing fs.h ChangeSet@1.1320.15.48, 2003-09-21 15:42:54-07:00, akpm@osdl.org [PATCH] AS oops fix From: Nick Piggin If a request is merged with another, it sometimes has to be repositioned on the rbtree - you just do a delete then an add. This is a quite uncommon case though. I changed the way adding works, so collisions must be handled by the caller instead of being dumbly fixed by the add routine. Unfortunately the uncommon callers weren't handling it properly. ChangeSet@1.1320.15.47, 2003-09-21 15:42:46-07:00, akpm@osdl.org [PATCH] zoran driver documentation fix From: Ronald Bultje the zoran kernel driver is called 'zoran.o' in its CVS (historical thing, I don't know why), and it's called zr36067.o in the kernel tree. The documentation in the kernel tree refers to zoran.o, though, which is (in the kernel tree) the driver for zr36120-based cards, rather than the driver for zr360x7-based cards. The attached patch fixes the documentation and makes it refer to zr36067.o instead. ChangeSet@1.1320.15.46, 2003-09-21 15:42:39-07:00, akpm@osdl.org [PATCH] Fix sem_lock deadlock From: Anton Blanchard I saw a lockup where 2 cpus were stuck in sem_lock(). It seems like we can loop back to retry_undos with the lock held. That path takes the lock so we will deadlock. ChangeSet@1.1320.15.45, 2003-09-21 15:42:31-07:00, akpm@osdl.org [PATCH] Handle init_new_context failures From: Anton Blanchard If init_new_context fails we definitely do not want to call mmput, because that will call destroy_context against an uninitialised context. Instead we should back out what we did in init_mm. Fixes some weird failures on ppc64 when running a fork bomb. ChangeSet@1.1320.15.44, 2003-09-21 15:42:22-07:00, akpm@osdl.org [PATCH] Speed up direct-io hugetlbpage handling This patch short-circuits all the direct-io page dirtying logic for higher-order pages. Without this, we pointlessly bounce BIOs up to keventd all the time. ChangeSet@1.1320.15.43, 2003-09-21 15:42:13-07:00, akpm@osdl.org [PATCH] bio_dirty_fn() page leak fix bio_dirty_fn() needs to drop its ref against each remaining page in the BIO before releasing the BIO. ChangeSet@1.1320.15.42, 2003-09-21 15:42:05-07:00, akpm@osdl.org [PATCH] deadline insert_here fix From: Nick Piggin Fix fallout from Jens' insert_here removal. Without it its possible that a request on the dispatch list is on the merge hash as well which is bad. I don't _think_ this would happen in any code paths, but I haven't looked too closely. It makes the API a bit less fragile anyway. ChangeSet@1.1320.15.41, 2003-09-21 15:41:56-07:00, akpm@osdl.org [PATCH] x445: setup_ioapic_ids_from_mpc fix From: James Cleverdon 32-way IBM x445s will have I/O xAPICs with IDs greater than 0xF (0x8 to 0xE isn't enough). This breaks the code in setup_ioapic_ids_from_mpc. However, the entire unique ID check is unnecessary. Only I/O APICs using the serial APIC bus need the unique numbers. Those sending messages through the system bus simply don't use them. ChangeSet@1.1320.15.40, 2003-09-21 15:41:47-07:00, akpm@osdl.org [PATCH] Incorrect value for SIGRTMAX From: Corey Minyard I was having a problem with signals with POSIX timers, and it turns out that the value of SIGRTMAX is incorrect. Remember that there is no signal 0, so the signals should go from 1-_NSIG. However, SIGRTMAX is defined as (_NSIG-1) in all architectures. The following patch fixes this. This define is only used in drivers/usb/core/devio.c and kernel/posix-timers.c, and both are incorrect without this fix. There's also no check for zero in posix-timers.c, that fix is part of the diff. Also, shouldn't do_sigaction() use this value instead of _NSIG? It's not a big deal, but some architectures have different values for _NSIG and SIGRTMAX. ChangeSet@1.1320.15.39, 2003-09-21 15:41:38-07:00, akpm@osdl.org [PATCH] NCR5380 timeout fix From: Wagner_Volanin I have an old Genius Colorpage-SP2 SCSI scanner. It is shipped with a MS-PNR 8bit ISA non-pnp proprietary SCSI card from Microtek. Although its chipset is a NCR53c400a, it wouldn't work with the appropriate driver, always accusing timeout, whatever settings I passed to it. Today I messed a little with the NCR5380.c file in drivers/scsi which is included by the g_NCR5380 driver and I couldn't understand one thing: Why the function NCR5380_poll_politely() returned the value 'r' on success if this value should be '0' case everything went ok... So I changed "return r;" to "return 0;" and after that my scanner worked fine, and was easily detected by SANE, without a single error message. :) I have not the time to delve into the problem further, but I wanted to report this. I couldn't find any counter-effects caused by changing these return values. (Acked by Alan) ChangeSet@1.1320.15.38, 2003-09-21 15:41:29-07:00, akpm@osdl.org [PATCH] hangcheck compile fix From: john stultz Since monotonic_clock() is not defined on every arch yet, this patch insures the hangcheck-timer module (currently the only user of monotonic-clock) is not built where it will not compile. I know, I know. Ideally monotonic_clock() would be implemented on all arches, but I've just not had the time. If any of the non x86/x86-64 folks feel bored, drop me a line. It'd be a fairly easy project. ChangeSet@1.1320.15.37, 2003-09-21 15:41:21-07:00, akpm@osdl.org [PATCH] Export new char dev functions From: Jonathan Corbet Nobody told me that the failure to export these (like their block counterparts) was anything but an oversight; modules will not be able to use larger device numbers without them. So...this patch exports the new char device functions. ChangeSet@1.1320.15.36, 2003-09-21 15:41:13-07:00, akpm@osdl.org [PATCH] Fix typo in scripts/postmod.c From: Kristian Hogsberg There's a small typo in scripts/postmod.c ChangeSet@1.1320.15.35, 2003-09-21 15:41:06-07:00, akpm@osdl.org [PATCH] Update Documentation/block/biodoc.txt From: Nick Piggin This brings biodoc.txt a bit more up to date with recent elevator changes. ChangeSet@1.1320.15.34, 2003-09-21 15:40:58-07:00, akpm@osdl.org [PATCH] access_ok is likely From Manfred While trying to figure out why sysv msg is around 30% slower than pipes for data transfers I noticed that gcc's autodetection (3.2.2) guesses the "if(access_ok())" tests in uaccess.h wrong and puts the error memset into the direct path and the copy out of line. So tell the compiler that access_ok() is likely to be true. ChangeSet@1.1320.15.33, 2003-09-21 15:40:51-07:00, akpm@osdl.org [PATCH] remove /proc/config_build_info From: Zwane Mwaikambo The same info is already available in /proc/version. ChangeSet@1.1320.15.32, 2003-09-21 15:40:42-07:00, akpm@osdl.org [PATCH] floppy cleanup timers/resources on unload From: Zwane Mwaikambo The floppy driver currently can leave pending timers after unloading itself. This bug has a corresponding bugzilla entry at; http://bugme.osdl.org/show_bug.cgi?id=1061 ChangeSet@1.1320.15.31, 2003-09-21 15:40:35-07:00, akpm@osdl.org [PATCH] wanXL serial card driver From: Krzysztof Halasa This is a driver for SBE Inc. wanXL 4-port sync serial card, second version. ChangeSet@1.1320.15.30, 2003-09-21 15:40:26-07:00, akpm@osdl.org [PATCH] Summit sub-arch: Make logical IDs independent of BIOS numbering scheme From: James Cleverdon In forthcoming IBM x445 systems, the physical APIC ID will not follow the simple rule laid out by Intel and encoded into xapic_phys_to_log_apicid. (The BIOS code that sets IDs doesn't work right above 16 CPUs if HT is turned on, so for > 16-way the BIOS will disable HT and repack the physical CPUs into APIC clusters.) Anyway, it's a good idea to make the APIC code more independent of any particular BIOS numbering scheme. This patch allocates logical IDs based on how many CPUs have already been onlined in a particular APIC cluster. ChangeSet@1.1320.15.29, 2003-09-21 15:40:18-07:00, akpm@osdl.org [PATCH] ens1370 PCI driver naming fix From: Patrick Mochel Two drivers are #including the same .c file. Use them both and we get a sysfs naming clash. ChangeSet@1.1320.15.28, 2003-09-21 15:40:10-07:00, akpm@osdl.org [PATCH] fix incorrect argv[0] for init From: Erik Andersen When someone specifies "init=" to select an alternative binary to run instead of /sbin/init, argv[0] is not set correctly. This is a problem for programs such as busybox that multiplex applications based on the value of argv[0]. For example, even if you specify init=/bin/sh" on the kernel command line, busybox will still receive "/sbin/init" as argv[0] and will therefore run init rather than /bin/sh... ChangeSet@1.1320.15.27, 2003-09-21 15:40:01-07:00, akpm@osdl.org [PATCH] file locking memory leak From: Matthew Wilcox This patch fixes a memory leak in the file locking code. Each attempt to unlock a file would result in the leak of a file lock. Many thanks to Martin Josefsson for providing the testcase which enabled me to figure out the problem. ChangeSet@1.1320.15.26, 2003-09-21 15:39:53-07:00, akpm@osdl.org [PATCH] istallion: use schedule_work From: "Krishnakumar. R" A missing schedule_task -> schedule_work conversion. ChangeSet@1.1320.15.25, 2003-09-21 15:39:45-07:00, akpm@osdl.org [PATCH] remove duplicate SOUND_RME96XX option From: Adrian Bunk sound/oss/Kconfig in 2.6.0-test5 includes two SOUND_RME96XX entries. ChangeSet@1.1320.15.24, 2003-09-21 15:39:37-07:00, akpm@osdl.org [PATCH] reiserfs: add checks from 2.4 into 2.5 From: Oleg Drokin This patch adds more consistency checks to reiserfs (check that transaction is not bigger than journal, check that we reply blocks not beyond fs and check that fs fits the block device). Similar patch was included into 2.4 some time ago. ChangeSet@1.1320.15.23, 2003-09-21 15:39:28-07:00, akpm@osdl.org [PATCH] misc fixes - Remove dead declaration from elevator.h (Nick Piggin) - Fix the scheduler selection boot-time message. "Using anticipatory scheduling io scheduler" is not grammatical. - Remove last use of __SMP__ (Randy Dunlap) ChangeSet@1.1320.15.22, 2003-09-21 15:39:20-07:00, akpm@osdl.org [PATCH] allow x86 NUMA architecture detection to fail From: Dave Hansen As described in this bug: http://bugme.osdl.org/show_bug.cgi?id=653 , if you enable Summit support and NUMA Discontigmem support but boot on a non-Summit box, the kernel will fail to boot. The problem is that the Summit code can not correctly get the NUMA memory configuration of a flat box. The code to do that is in get_memcfg_numa_flat(), but it never gets called. This patch implements a fallback to the generic NUMA code in get_memcfg_numa_flat() if the Summit detection fails. The patch also adds the necessary bits to the Summit code so that it *knows* when it fails. ChangeSet@1.1320.15.21, 2003-09-21 15:39:11-07:00, akpm@osdl.org [PATCH] any_online_cpu fix From: William Lee Irwin III any_online_cpu() is required to and with cpu_online_map before attempting to find an online cpu somewhere in the map; this patch adds that logic to the implementation(s) of any_online_cpu(). ChangeSet@1.1320.15.20, 2003-09-21 15:39:04-07:00, akpm@osdl.org [PATCH] mwave char/Kconfig fix From: Angus Sawyer The mwave driver requires [un]register_char from 8250.c Make sure 8250.c gets compilied. ChangeSet@1.1320.15.19, 2003-09-21 15:38:55-07:00, akpm@osdl.org [PATCH] AGP warning fix agp_setup() is unreferenced if it's a module. ChangeSet@1.1320.15.18, 2003-09-21 15:38:47-07:00, akpm@osdl.org [PATCH] Remove Documentation/smp.tex Hopelessly out of date ChangeSet@1.1320.15.17, 2003-09-21 15:38:38-07:00, akpm@osdl.org [PATCH] Move slab objects to the end of the real allocation From: Manfred Spraul The real memory allocation is usually larger than the actual object size: either due to L1 cache line padding, or due to page padding with CONFIG_DEBUG_PAGEALLOC. Right now objects are placed to the beginning of the real allocation, but to trigger bugs it's better to move objects to the end of the real allocation: that way accesses behind the end of the allocation have a larger chance of hitting the (unmapped) next page. The attached patch moves the objects to align them with the end of the real allocation. Actually it contains 4 seperate changes: - Do not page-pad allocations that are <= SMP_CACHE_LINE_SIZE. This crashes. Right now the limit is hardcoded to 128 bytes, but sooner or later an arch will appear with 256 byte cache lines. - cleanup: redzone bytes are not accessed with inline helper functions, instead of magic offsets scattered throughout slab.c - main change: move objects to the end of the allocation - trivial after the cleanup. - Print old redzone value if a redzone mismatch happens: This makes it simpler to figure out what happened [single bit error, wrong redzone code, overwritten] ChangeSet@1.1320.15.16, 2003-09-21 15:38:31-07:00, akpm@osdl.org [PATCH] might_sleep diagnostics might_sleep() can be triggered by either local interrupts being disabled or by elevated preempt count. Disambiguate them. ChangeSet@1.1320.15.15, 2003-09-21 15:38:24-07:00, akpm@osdl.org [PATCH] CPU scheduler interactivity changes From: Con Kolivas Interactivity scheduler tweaks on top of Ingo's A3 interactivity patch. Interactive credit added to task struct to find truly interactive tasks and treat them differently. Extra #defines included as helpers for conversion to/from nanosecond timing, to work out an average timeslice for nice 0 tasks, and the effective dynamic priority bonuses that will be given to tasks. MAX_SLEEP_AVG modified to change dynamic priority by one for a nice 0 task sleeping or running for one full timeslice. CREDIT_LIMIT is the number of times a task earns sleep_avg over MAX_SLEEP_AVG before it is considered HIGH_CREDIT (truly interactive); and -CREDIT_LIMIT is LOW_CREDIT TIMESLICE GRANULARITY is modified to be more frequent for more interactivetasks (10 ms for top 2 dynamic priorities and then halving each priority belowthat) and less frequent per extra cpu. JUST_INTERACTIVE_SLEEP logic created to be a sleep_avg consistent with giving a task enough dynamic priority to remain on the active array. Task preemption of equal priority tasks is dropped as requeuing with TIMESLICE_GRANULARITY makes this unecessary. Dynamic priority bonus simplified. User tasks that sleep a long time and not waking from uninterruptible sleep are sought and categorised as idle. Their sleep avg is limited in it's rise to prevent them becoming high priority and suddenly turning into cpu hogs. Bonus for sleeping is proportionately higher the lower the dynamic priority of a task is; this allows for very rapid escalation to interactive status. Tasks that are LOW_CREDIT are limited in rise per sleep to one priority level. Non HIGH_CREDIT tasks waking from uninterruptible sleep are sought to detect cpu hogs waiting on I/O and their sleep_avg rise is limited to just interactive state to prevent cpu bound tasks from becoming interactive during I/O wait. Tasks that earn sleep_avg over MAX_SLEEP_AVG get interactive credits. On runqueue bonus is not given to non HIGH_CREDIT tasks waking from uninterruptible sleep. Forked tasks and their parents get sleep_avg limited to the minimum necessary to maintain their effective dynamic priority thus preventing repeated forking from being a way to get highly interactive, but not penalise them noticably otherwise. CAN_MIGRATE_TASK cleaned up and modified to work with nanosecond timestamps. Reverted Ingo's A3 Starvation limit change - it was making interactive tasks suffer more under increasing load. If a cpu is grossly overloaded and everyone is going to starve it may as well run interactive tasks preferentially. Task requeuing is limited to interactive tasks only (cpu bound tasks dont need low latency and derive benefit from longer timeslices), and they must have at least TIMESLICE_GRANULARITY remaining. HIGH_CREDIT tasks get penalised less sleep_avg the more interactive they are thus keeping them interactive for bursts but if they become sustained cpu hogs they will slide increasingly rapidly down the dynamic priority scale. Tasks that run out of sleep_avg, are still using up cpu time and are not high or low credit yet get penalised interactive credits to determine LOW_CREDIT tasks (cpu bound ones). ChangeSet@1.1320.15.14, 2003-09-21 15:38:16-07:00, akpm@osdl.org [PATCH] CPU scheduler balancing fix From: Nick Piggin The patch changes the imbalance required before a balance to 25% from 50% - as the comments intend. It also changes a case where the balancing wouldn't be done if the imbalance was >= 25% but only 1 task difference. The downside of the second change is that one task may bounce from one cpu to another for some loads. This will only bounce once every 200ms, so it shouldn't be a big problem. (Benchmarking results are basically a wash - SDET is increased maybe 0.5%) ChangeSet@1.1320.15.13, 2003-09-21 15:38:08-07:00, akpm@osdl.org [PATCH] sched_clock() for ppc, ppc64, x86_64 and sparc64 Ingo's CPU scheduler update (in -mm kernels) needs a new sched_clock() function which returns nanoseconds. The patch provides implementations for ppc, ppc64, x86_64 and sparc64. The x86_64 version could have overflow issues, the calculation is done in 32bits only with an multiply. But I hope it's good enough for the scheduler The ppc64 version needs scaling: it's only accurate for 1GHz CPUs. ChangeSet@1.1320.15.12, 2003-09-21 15:38:00-07:00, akpm@osdl.org [PATCH] scheduler infrastructure From: Ingo Molnar the attached scheduler patch (against test2-mm2) adds the scheduling infrastructure items discussed on lkml. I got good feedback - and while i dont expect it to solve all problems, it does solve a number of bad ones: - test_starve.c code from David Mosberger - thud.c making the system unusuable due to unfairness - fair/accurate sleep average based on a finegrained clock - audio skipping way too easily other changes in sched-test2-mm2-A3: - ia64 sched_clock() code, from David Mosberger. - migration thread startup without relying on implicit scheduling behavior. While the current 2.6 code is correct (due to the cpu-up code adding CPUs one by one), but it's also fragile - and this code cannot be carried over into the 2.4 backports. So adding this method would clean up the startup and would make it easier to have 2.4 backports. and here's the original changelog for the scheduler changes: - cycle accuracy (nanosec resolution) timekeeping within the scheduler. This fixes a number of audio artifacts (skipping) i've reproduced. I dont think we can get away without going cycle accuracy - reading the cycle counter adds some overhead, but it's acceptable. The first nanosec-accuracy patch was done by Mike Galbraith - this patch is different but similar in nature. I went further in also changing the sleep_avg to be of nanosec resolution. - more finegrained timeslices: there's now a timeslice 'sub unit' of 50 usecs (TIMESLICE_GRANULARITY) - CPU hogs on the same priority level will roundrobin with this unit. This change is intended to make gaming latencies shorter. - include scheduling latency in sleep bonus calculation. This change extends the sleep-average calculation to the period of time a task spends on the runqueue but doesnt get scheduled yet, right after wakeup. Note that tasks that were preempted (ie. not woken up) and are still on the runqueue do not get this benefit. This change closes one of the last hole in the dynamic priority estimation, it should result in interactive tasks getting more priority under heavy load. This change also fixes the test-starve.c testcase from David Mosberger. The TSC-based scheduler clock is disabled on ia32 NUMA platforms. (ie. platforms that have unsynched TSC for sure.) Those platforms should provide the proper code to rely on the TSC in a global way. (no such infrastructure exists at the moment - the monotonic TSC-based clock doesnt deal with TSC offsets either, as far as i can tell.) ChangeSet@1.1320.15.11, 2003-09-21 15:37:51-07:00, akpm@osdl.org [PATCH] NLS: remove emacs metadata From: OGAWA Hirofumi This elisp was obsolete on recently emacs's cc-mode. And this should be personally set. ChangeSet@1.1320.15.10, 2003-09-21 15:37:43-07:00, akpm@osdl.org [PATCH] NLS: Remove the nls modules for only alias From: OGAWA Hirofumi This does the following, 1) This removes the nls modules for only alias. For backward compatible, this adds ->alias, and ->alias provides alias of charset. 2) For autoloading the module by the alias, use MODULE_ALIAS mechanism. 3) From changelog of module-init-tools, looks like MODULE_ALIAS needs module-init-tools 0.9.10 or later. So change the "Documentation/Changes". ChangeSet@1.1320.15.9, 2003-09-21 15:37:34-07:00, akpm@osdl.org [PATCH] mtrr warning fix w/o proc_fs From: Stephen Hemminger Get rid of warnings (and dead code) if MTRR is compiled without /proc ChangeSet@1.1320.15.8, 2003-09-21 15:37:26-07:00, akpm@osdl.org [PATCH] Overflow check for i386 assign_irq_vector From: James Cleverdon Some very large systems overflow the array and corrupt memory. A BUG_ON will at least flag the problem until dynamic irq_vector allocation is added. ChangeSet@1.1320.15.7, 2003-09-21 15:37:18-07:00, akpm@osdl.org [PATCH] reiserfs: large file 32/64-bit truncation fix From: Oleg Drokin Fix trucation-induced large file corruption in reiserfs. ChangeSet@1.1320.15.6, 2003-09-21 15:37:10-07:00, akpm@osdl.org [PATCH] Fix setpgid and threads From: Jeremy Fitzhardinge I'm resending my patch to fix this problem. To recap: every task_struct has its own copy of the thread group's pgrp. Only the thread group leader is allowed to change the tgrp's pgrp, but it only updates its own copy of pgrp, while all the other threads in the tgrp use the old value they inherited on creation. This patch simply updates all the other thread's pgrp when the tgrp leader changes pgrp. Ulrich has already expressed reservations about this patch since it is (1) incomplete (it doesn't cover the case of other ids which have similar problems), (2) racy (it doesn't synchronize with other threads looking at the task pgrp, so they could see an inconsistent view) and (3) slow (it takes linear time with respect to the number of threads in the tgrp). My reaction is that (1) it fixes the actual bug I'm encountering in a real program. (2) doesn't really matter for pgrp, since it is mostly an issue with respect to the terminal job-control code (which is even more broken without this patch. Regarding (3), I think there are very few programs which have a large number of threads which change process group id on a regular basis (a heavily multi-threaded job-control shell?). Ulrich also said he has a (proposed?) much better fix, which I've been looking forward to. I'm submitting this patch as a stop-gap fix for a real bug, and perhaps to prompt the improved patch. An alternative fix, at least for pgrp, is to change all references to ->pgrp to group_leader->pgrp. This may be sufficient on its own, but it would be a reasonably intrusive patch (I count 95 instances in 32 files in the 2.6.0-test3-mm3 tree). ChangeSet@1.1320.15.5, 2003-09-21 15:37:01-07:00, akpm@osdl.org [PATCH] real-time enhanced page allocator and throttling From: Robert Love - Let real-time tasks dip further into the reserves than usual in __alloc_pages(). There are a lot of ways to special case this. This patch just cuts z->pages_low in half, before doing the incremental min thing, for real-time tasks. I do not do anything in the low memory slow path. We can be a _lot_ more aggressive if we want. Right now, we just give real-time tasks a little help. - Never ever call balance_dirty_pages() on a real-time task. Where and how exactly we handle this is up for debate. We could, for example, special case real-time tasks inside balance_dirty_pages(). This would allow us to perform some of the work (say, waking up pdflush) but not other work (say, the active throttling). As it stands now, we do the per-processor accounting in balance_dirty_pages_ratelimited() but we never call balance_dirty_pages(). Lots of approaches work. What we want to do is never engage the real-time task in forced writeback. ChangeSet@1.1320.15.4, 2003-09-21 15:36:53-07:00, akpm@osdl.org [PATCH] ECC support From: "Nakajima, Jun" Split the increasingly messy compiler.h file into per-compiler files and also add support for non-gcc compilers. With the current implementation: include/linux/compiler.h defines the compiler-dependent abstractions which can be overwritten by per-compiler definitions. include/linux/compiler-gcc.h contains the common definitions for all gcc versions. include/linux/compiler-gcc[2,3,+].h contains gcc major version specific definitions. include/linux/compiler-intel.h contains intel compiler specific definitions." ChangeSet@1.1320.15.3, 2003-09-21 15:36:44-07:00, akpm@osdl.org [PATCH] procfs build fix for older gcc - declarations come first - fix bizarre coding style. ChangeSet@1.1320.3.2, 2003-09-21 21:05:12+01:00, rmk@flint.arm.linux.org.uk [PCMCIA] Fix deadlocks caused between PCMCIA card fix and device model The problem was that the semaphore which prevents ds interfering with the sleepy card initialisation (skt_sem in pccardd) is blocking insmod of the socket driver. However, the socket driver is being called with the PCI bus semaphore held by the driver model. pccardd in turn discovered a cardbus card (with skt_sem held), so it is trying to add the PCI devices to the PCI bus, and this requires the driver model to grab the PCI bus semaphore, but its already locked. We move the class device register into pccardd so we get a natural ordering between the ds socket initialisation and pccardd trying to detect inserted cards. We also fix a potential use-after-free caused by rmmod'ing the socket driver before ds has shut down. ChangeSet@1.1320.2.41, 2003-09-21 19:24:48+00:00, ambx1@neo.rr.com [PNPBIOS] move some more functions to local include file This patch moves some unnecessary global functions to the local pnpbios include file. ChangeSet@1.1320.2.40, 2003-09-21 19:20:41+00:00, ambx1@neo.rr.com [PNPBIOS] return proper error codes on init failure ChangeSet@1.1320.2.39, 2003-09-21 19:10:33+00:00, ambx1@neo.rr.com [ISAPNP] remove unused isapnp_allow_dma0 modparam It looks like this option has been moved from isapnp to resource.c, but the MODULE_PARM line is still there: patch from: Gerald Teschl ChangeSet@1.1320.2.38, 2003-09-21 19:05:42+00:00, ambx1@neo.rr.com [PATCH] janitor: remove unneeded includes (isapnp) From: Randy Hron ChangeSet@1.1320.2.37, 2003-09-21 19:02:08+00:00, ambx1@neo.rr.com [PNP] remove DMA 0 restrictions The original argument for blocking DMA 0 was to avoid conflicts with "memory refresh" but such configurations are only found on very old 8-bit systems that are likely not supported by the linux kernel. This patch allows dma 0 to be assigned to PnP devices by default. If for whatever reason dma 0 cannot be used, one can avoid allocating it by setting the pnp_reserve_dma= kernel parameter. ChangeSet@1.1320.2.36, 2003-09-21 18:39:11+00:00, ambx1@neo.rr.com [PNPBIOS] move detection code into core.c This patch moves the detection code to a more appropriate file. ChangeSet@1.1320.2.35, 2003-09-21 18:25:50+00:00, ambx1@neo.rr.com [PNP] release card devices on probe failure When a driver's probe routine fails, it may not release all of the card devices it requested. This patch allows the pnp layer to ensure that all devices claimed by the failing driver are released properly. ChangeSet@1.1320.2.34, 2003-09-21 17:55:37+00:00, ambx1@neo.rr.com [PNPBIOS] compilation fix for pnpbios without proc support Here's an updated patch that will correct the compile error when PROC FS is disabled. It also introduces better proc error recovery and moves the local proc functions to the local include file. Thanks to Daniele Bellucci for finding the problem and contributing to this patch. ChangeSet@1.1320.2.33, 2003-09-21 12:16:28-07:00, albert@users.sourceforge.net [PATCH] fix for hidden-task problem It's bad to make (CLONE_THREAD | CLONE_DETACHED) tasks be _completely_ hidden. Resource consumption is hard to track down if a user can hide a task from /bin/ps. This patch, supported by the procps-3.1.13 release, gives admins the ability to search for such tasks. The top-level /proc directory remains uncontaminated. ChangeSet@1.1320.2.32, 2003-09-21 12:15:45-07:00, torvalds@home.osdl.org Disable forced keyrelease in atkbd driver. It breaks modifier keys. ChangeSet@1.1320.2.31, 2003-09-21 10:20:02-07:00, willy@debian.org [PATCH] Move EISA_bus When I change the setting of CONFIG_EISA, everything rebuilds. This is because EISA_bus is declared in which is implicitly included by just about everything. This is a silly place to declare it, so this patch moves it to include/linux/eisa.h. While I'm at it, I also move the variable definition to drivers/eisa/eisa-bus.c. The rest of this patch is fixing up the fallout from having to include if you use EISA_bus. ChangeSet@1.1320.10.2, 2003-09-21 11:29:53+01:00, rmk@flint.arm.linux.org.uk [ARM] Avoid using clone syscall from kernel_thread() Don't issue a system call from kernel_thread(), but call do_fork() directly. This avoids all the unnecessary syscall overhead. ChangeSet@1.1320.2.30, 2003-09-20 19:44:15-07:00, torvalds@home.osdl.org Don't ask about SERIO selection - let Kconfig select it automatically as needed. ChangeSet@1.1320.14.1, 2003-09-20 20:39:42-04:00, jgarzik@redhat.com [sound/oss i810_audio] sync with 2.4 * increase length of wait for analog-ready * fix printk prefix (cosmetic) * bail out for pure MMIO interfaces, instead of attempting to use it via PIO and hanging the system. ChangeSet@1.1320.11.41, 2003-09-20 17:10:07-07:00, torvalds@home.osdl.org Avoid type warning for bit operation in atkbd.c ChangeSet@1.1320.13.1, 2003-09-20 16:51:41-07:00, torvalds@home.osdl.org Merge bk://kernel.bkbits.net/vojtech/input into home.osdl.org:/home/torvalds/v2.5/linux ChangeSet@1.1320.12.2, 2003-09-20 21:23:16+02:00, sam@mars.ravnborg.org kbuild: modpost, corrected check of mmap() From: Kristian Høgsberg Corrected typo in modpost.c. Check the pointer returned, not the pointer to the mmap funtion ChangeSet@1.1320.12.1, 2003-09-20 21:16:19+02:00, sam@mars.ravnborg.org Merge mars.ravnborg.org:/home/sam/bk/linux-2.6 into mars.ravnborg.org:/home/sam/bk/sepout ChangeSet@1.1320.11.39, 2003-09-20 15:10:14-04:00, shemminger@osdl.org [PATCH] Road Runner HIPPI driver (rrunner) Small clean up, to use current APIs. ChangeSet@1.1320.11.38, 2003-09-20 15:08:21-04:00, achirica@telefonica.net [wireless airo] Fix MIC support with CryptoAPI ChangeSet@1.1320.11.37, 2003-09-20 15:06:32-04:00, achirica@telefonica.net [wireless airo] fix PCI probe ChangeSet@1.1320.1.22, 2003-09-20 16:06:18-03:00, acme@conectiva.com.br o LLC: use list_for_each_entry in llc_sap_find ChangeSet@1.1320.11.36, 2003-09-20 15:03:43-04:00, jochen@scram.de [tokenring] fix breakage in proteon, skisa this one fixes both drivers. They have been broken since the reorganization in June. Unfortunately, my major build platform (alpha) had some issues with later 2.5.X kernels (cache problems causing all kind of funny behaviour), so i waited until these problems had been resolved by the alpha gurus :-/... In the mean time i also upgraded pine. I hope the patch corruption issue is resolved by now. ChangeSet@1.1276.1.3, 2003-09-20 21:03:23+02:00, sam@mars.ravnborg.org Merge mars.ravnborg.org:/home/sam/bk/kbuild-patchset-1 into mars.ravnborg.org:/home/sam/bk/sepout ChangeSet@1.1320.11.35, 2003-09-20 15:02:24-04:00, shemminger@osdl.org [PATCH] hamradio/scc - Update hamradio/scc for 2.6.0-test5 - use seq_file for /proc - get rid of dev_get() - use alloc_netdev Don't have hardware, but can load/unload the module fine. ChangeSet@1.1276.1.2, 2003-09-20 21:02:08+02:00, sam@mars.ravnborg.org kbuild/rpm: Fix 'make rpm' and enable use of 'make O=dir rpm' Simplify 'make rpm' a bit, and enable use of rpm in combination with separate output directory. Also added kernel.spec to ignore list ChangeSet@1.1320.11.34, 2003-09-20 14:49:10-04:00, amir.noam@intel.com [PATCH] [bonding] Convert /proc to seq_file This patch converts /proc/net/bondX/info into /proc/net/bonding/bondX using the seq_file interface. This is based on Stephen's recent patch, but slightly modified to work with the propagation patch set and with some locking changes to make it simpler. The patch applies both on 2.4 (after the sync set from earlier today) and on 2.6 (after the propagation set from 2003/11/9). Amir ChangeSet@1.1320.11.33, 2003-09-20 14:49:01-04:00, bunk@fs.tum.de [PATCH] fix sbni.c compile with gcc 3.3 sbni.c in 2.6.0-test5 fails to compile with gcc 3.3 with the following error: <-- snip --> ... CC drivers/net/wan/sbni.o ... drivers/net/wan/sbni.c: In function `calc_crc32': drivers/net/wan/sbni.c:1568: error: asm-specifier for variable `_crc' conflicts with asm clobber list make[3]: *** [drivers/net/wan/sbni.o] Error 1 <-- snip --> Below is the patch by Margit Schubert-White to fix this issue (it is already in 2.4). cu Adrian ChangeSet@1.1320.11.32, 2003-09-20 14:48:53-04:00, akpm@osdl.org [PATCH] e1000 bug Rick Lindsley wrote: > > since it's been out for a while you probably already know, but the patch > for e1000_main.c has a bug in it. Looks like it will fail at line 1550 if > compiled with NETIF_F_TSO defined. > So it will. I blame the gcc developers. 25-akpm/drivers/net/e1000/e1000_main.c | 13 +++++++++---- 1 files changed, 9 insertions(+), 4 deletions(-) ChangeSet@1.1320.11.31, 2003-09-20 14:15:22-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Fix ipx_hdr compile error ChangeSet@1.1320.11.30, 2003-09-20 14:15:15-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Add missing free_netdev() ChangeSet@1.1320.11.29, 2003-09-20 14:15:07-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Enhance netdev notification handling ChangeSet@1.1320.11.28, 2003-09-20 14:14:59-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Consolidate /proc code, add CHANGENAME handler ChangeSet@1.1320.11.27, 2003-09-20 14:14:52-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Add support for changing HW address in ALB/TLB modes ChangeSet@1.1320.11.26, 2003-09-20 14:14:44-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Add support for changing HW address and MTU ChangeSet@1.1320.11.25, 2003-09-20 14:14:36-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] Decouple promiscuous handling from multicast mode setting ChangeSet@1.1320.11.24, 2003-09-20 14:14:29-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] fix assign_current_slave ChangeSet@1.1320.11.23, 2003-09-20 14:14:21-04:00, amir.noam@intel.com [PATCH] [bonding 2.6] consolidate change_active operations ChangeSet@1.1320.11.22, 2003-09-20 14:13:00-04:00, shemminger@osdl.org [PATCH] update arcnet/pcmcia driver Redo of earlier patch to get rid of MOD_INC/DEC and use alloc_netdev. This is against 2.6.0-test5 bk latest. ChangeSet@1.1320.11.21, 2003-09-20 14:12:52-04:00, shemminger@osdl.org [PATCH] sealevel wan driver Update sealevel driver to match current net_device interface: - dynamically allocate netdevice and private data. - get rid of MOD_INC/DEC - if_ptr not used - bugfix: not all of board structure was being zeroed. Note: this driver still doesn't probe() correctly since it just assumes that if loaded the hardware is there! Since I don't have one of these boards... tested it by #ifdef'ing out all the bits that touch actual hardware. ChangeSet@1.1320.11.20, 2003-09-20 14:06:08-04:00, shemminger@osdl.org [IrDA] ali-ircc -- dev_alloc cleanout Convert ali-ircc driver to: - use alloc_net_dev not dev_alloc - allocate private data at same time - cleanup error unwinds - call free_netdev. Builds and loads, but don't have real hardware. ChangeSet@1.1320.11.19, 2003-09-20 14:06:01-04:00, shemminger@osdl.org [IrDA] via-ircc -- dev_alloc cleanout Convert via-ircc 2.6.0-test5 - use alloc_net_dev not dev_alloc - allocate private data at same time - cleanup error unwinds - call free_netdev. Builds and loads, but don't have real hardware. ChangeSet@1.1320.11.18, 2003-09-20 14:05:53-04:00, shemminger@osdl.org [IrDA] nsc-ircc -- dev_alloc cleanout Cleanup nsc-ircc driver for 2.6.0-test5 - replace dev_alloc with alloc_netdev - use private data allocated with alloc_netdev - error unwind cleanup ChangeSet@1.1320.11.17, 2003-09-20 14:05:46-04:00, shemminger@osdl.org [IrDA] donahoboe -- dev_alloc cleanout Fixes for donauboe for 2.6.0-test5 - replace dev_alloc with alloc_netdev - error unwind cleanup ChangeSet@1.1320.11.16, 2003-09-20 14:05:38-04:00, shemminger@osdl.org [IrDA] w83977af -- dev_alloc cleanout Yet another irda driver cleanup for 2.6.0-test5 - replace dev_alloc with alloc_netdev - use private data allocated with alloc_netdev - use free_netdev ChangeSet@1.1320.11.15, 2003-09-20 14:05:31-04:00, shemminger@osdl.org [IrDA] irda-usb -- dev_alloc cleanout Update irda-usb for 2.6.0-test5 - use alloc_netdev (but can't use dev->priv area cause that is allocated elsewhere). ChangeSet@1.1320.11.14, 2003-09-20 14:00:00-04:00, rddunlap@osdl.org [PATCH] janitor: ns83820 error handling Subject: Re: [Kernel-janitors] [PATCH] insert missing free_irq and fix cleanup path From: Leann Ogasawara On Thu, 2003-09-04 at 13:17, Benjamin LaHaise wrote: > The if()s before free are redundant, turf them and it's good. ChangeSet@1.1320.11.13, 2003-09-20 13:59:53-04:00, rddunlap@osdl.org [PATCH] janitor: insert a missing iounmap() From: Leann Ogasawara Subject: [Kernel-janitors] [PATCH] insert missing iounmap() Patch inserts a missing iounmap(). ChangeSet@1.1320.11.12, 2003-09-20 13:59:45-04:00, shemminger@osdl.org [PATCH] get rid of old IRDA drivers. According to Jean the toshoboe and old smc ircc drivers are no longer needed. This patch removes them from 2.6.0-test5 ChangeSet@1.1320.11.11, 2003-09-20 13:59:37-04:00, chrisw@osdl.org [netdrvr] use cpu_relax() in busy loop, or mdelay instead of busy loop Replace busy loop nop with cpu_relax(), and just use mdelay where it's better. ChangeSet@1.1320.11.10, 2003-09-20 13:56:15-04:00, rddunlap@osdl.org [PATCH] janitor: remove (or add) unneeded includes (drivers/net/) From: Randy Hron ChangeSet@1.1320.11.9, 2003-09-20 13:56:07-04:00, rddunlap@osdl.org [PATCH] janitor: remove unneeded includes (hamradio) From: Randy Hron ChangeSet@1.1320.11.8, 2003-09-20 13:56:00-04:00, rddunlap@osdl.org [PATCH] janitor: remove (or add) unneeded includes (wireless) From: Randy Hron ChangeSet@1.1320.11.7, 2003-09-20 13:55:52-04:00, rddunlap@osdl.org [PATCH] janitor: remove unneeded includes (skfp) From: Randy Hron ChangeSet@1.1320.11.6, 2003-09-20 13:55:45-04:00, rddunlap@osdl.org [PATCH] janitor: remove (or add) unneeded includes From: Randy Hron ChangeSet@1.1320.11.5, 2003-09-20 13:55:37-04:00, rddunlap@osdl.org [PATCH] janitor: remove unneeded includes (sk98lin) From: Randy Hron ChangeSet@1.1320.11.4, 2003-09-20 13:55:29-04:00, rddunlap@osdl.org [PATCH] janitor: remove unneeded includes (tokenring) From: Randy Hron ChangeSet@1.1320.11.3, 2003-09-20 13:55:21-04:00, shemminger@osdl.org [PATCH] replace sppp_of macro with inline Replace macro with inline and get some type checking. ChangeSet@1.1320.11.2, 2003-09-20 13:55:14-04:00, felipewd@terra.com.br [PATCH] Unneeded memory barrier in net/irda code ChangeSet@1.1320.11.1, 2003-09-20 13:55:06-04:00, mzyngier@freesurf.fr [PATCH] depca update I finally found some time to hack the depca driver, in basically the same way I did with the de4x5 driver. The patch is quite big (shuffles a lot of code around, removes lots of global variables), mainly in order to use the driver model on every bus supported by this driver. I also removed the probing from Space.c, so the usual warning about device renumbering applies. Tested on alpha (DE422, EISA) and i386 (two DE201, ISA), built-in and modular. The MCA part is completly untested, since I lack the hardware (no, I do not own every single piece of junk hardware out there... ;-). ChangeSet@1.1267.1.7, 2003-09-20 17:14:44+02:00, sam@mars.ravnborg.org kbuild: Escape "'" in cmd macro Building drivers/eisa were broken in non-verbose mode. This has been fixed by escaping "'" for cmd. It was used in $(call cmd,eisaid). Escaping "'" is already done by if_changed, so this brings cmd in line with if_changed ChangeSet@1.1320.10.1, 2003-09-20 10:48:03+01:00, rmk@flint.arm.linux.org.uk [ARM] Fix up includes Remove duplicate includes, ensure that linux/config.h is included where necessary, and linux/config.h isn't included where it isn't needed. ChangeSet@1.1356, 2003-09-20 01:20:38-07:00, shemminger@osdl.org [NET]: Fix bug in dev_get() deprecation patch. ChangeSet@1.1355, 2003-09-20 01:19:24-07:00, shemminger@osdl.org [NET]: Deprecate dev_get(). ChangeSet@1.1354, 2003-09-20 01:16:58-07:00, shemminger@osdl.org [IPVS]: Use time_before/after. ChangeSet@1.1353, 2003-09-20 01:16:00-07:00, shemminger@osdl.org [IPVS]: Use list_for_each_entry macro. ChangeSet@1.1352, 2003-09-20 01:14:20-07:00, shemminger@osdl.org [IPVS]: Get rid of SEQ_START_TOKEN define. ChangeSet@1.1351, 2003-09-20 01:10:52-07:00, shemminger@osdl.org [IPVS]: Get rid of register declarations. ChangeSet@1.1350, 2003-09-20 01:08:38-07:00, davem@nuts.ninka.net [IPV4]: Fix skb leak in igmp.c ChangeSet@1.1320.9.3, 2003-09-20 01:04:46-07:00, rddunlap@osdl.org [SPARC]: Remove unneeded includes (from Randy Hron). ChangeSet@1.1348, 2003-09-20 01:03:59-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (wanrouter, from Randy Hron). ChangeSet@1.1347, 2003-09-20 01:03:31-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (wireless, from Randy Hron). ChangeSet@1.1346, 2003-09-20 01:02:52-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (hamradio, from Randy Hron). ChangeSet@1.1345, 2003-09-20 01:02:34-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (wan, from Randy Hron). ChangeSet@1.1344, 2003-09-20 01:01:30-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (sk98lin). ChangeSet@1.1343, 2003-09-20 01:01:04-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (skfp). ChangeSet@1.1320.9.2, 2003-09-20 00:56:43-07:00, zaitcev@redhat.com [SPARC]: Down with P3's in srmmu.c ChangeSet@1.1320.9.1, 2003-09-20 00:56:15-07:00, zaitcev@redhat.com [SPARC]: One more multi-line string, from Rob Radez. ChangeSet@1.1342, 2003-09-20 00:53:39-07:00, rddunlap@osdl.org [NET]: Remove unneeded includes (tokenring). ChangeSet@1.1341, 2003-09-20 00:52:56-07:00, shemminger@osdl.org [NET]: More const in skbuff.h ChangeSet@1.1340, 2003-09-20 00:50:14-07:00, rddunlap@osdl.org [WAN]: Use module_exit() in sdladrv. ChangeSet@1.1339, 2003-09-20 00:49:41-07:00, shemminger@osdl.org [IRDA]: Convert ircomm to seq_file ChangeSet@1.1338, 2003-09-20 00:48:45-07:00, shemminger@osdl.org [IRDA]: proc/net/irda files using seq_file ChangeSet@1.1337, 2003-09-20 00:47:06-07:00, chrisw@osdl.org [IPV4]: Use cpu_relax() in ipconfig.c ChangeSet@1.1336, 2003-09-20 00:46:27-07:00, shemminger@osdl.org [IRDA]: Eliminate skb_linearize() from irda. ChangeSet@1.1335, 2003-09-20 00:45:52-07:00, levon@movementarian.org [NET]: SEQ_START_TOKEN for af_netlink.c ChangeSet@1.1334, 2003-09-20 00:42:07-07:00, rddunlap@osdl.org [WAN]: Convert taskqueues to workqueues. ChangeSet@1.1333, 2003-09-20 00:40:57-07:00, rddunlap@osdl.org [WAN]: Remove multi-line string literal. ChangeSet@1.1332, 2003-09-20 00:38:51-07:00, shemminger@osdl.org [IPV4]: In tcp_diag.c, use static, const, and void *, as appropriate. ChangeSet@1.1320.1.21, 2003-09-20 02:52:42-03:00, acme@conectiva.com.br o LLC: llc_station.h is not useful anymore, kill it Some defines had no place in this header, moved to llc_conn.h, the struct llc_station, that probably will disappear in the near future, is used only in llc_station.c, so remove one more file from the include forest. ChangeSet@1.1320.1.20, 2003-09-20 02:34:20-03:00, acme@conectiva.com.br o LLC: consolidate the LLC station component into llc_station.c Deleting llc_actn.[ch], llc_evnt.[ch] & llc_stat.[ch], now it is clearly separated from the rest and lots of previously externally visible thru headers stuff is nicely restrained in this file. Also remove the silly passing around of pointers to llc_main_station, use it directly. ChangeSet@1.1320.1.19, 2003-09-20 01:35:30-03:00, acme@conectiva.com.br o LLC: reorganize llc_station.c to kill useless static prototypes ChangeSet@1.1320.1.18, 2003-09-20 01:25:44-03:00, acme@conectiva.com.br o LLC: rename llc_main.[ch] to llc_station.[ch] First step at coalescing the station handling into just one file, killing some useless headers in the process. ChangeSet@1.1320.1.17, 2003-09-19 23:00:14-03:00, acme@conectiva.com.br o LLC: trim down llc_core to the very basic support needed by IPX et all Renaming the basic support module to llc.ko and introducing llc_core.c, that has just the basic output path for llc_build_and_send_ui_pkt. Next step will be to rename llc_main.c to llc_station.c, then consolidate all the llc station code in this file, removing all the not needed llc_station parameters and killing struct llc_station altogether, no sense in having it as there is just one station, always. BTW in this changeset parts of llc_main_station was already moved to llc_core.c, namely the sap list and lock. ChangeSet@1.1320.2.28, 2003-09-19 16:51:20-07:00, greg@kroah.com Merge kroah.com:/home/linux/BK/bleed-2.5 into kroah.com:/home/linux/BK/gregkh-2.6 ChangeSet@1.1315.9.30, 2003-09-19 16:28:31-07:00, dhollis@davehollis.com [PATCH] USB: ethtool_ops and ax8817x fixes for usbnet This is a resend of all of my recent usbnet additions which center on adding ethtool_ops support. All have been re-diffed against the latest usbnet from BK. Changes: * Add ethtool_ops support to usbnet * Add GPIO bit toggling upon initialization of ax8817x devices so that xmit works properly * Add Wake-On-Lan and eeprom dump support for ax8817x devices (this only adds the config support for WOL, actual operation is more of a USB/Power Management function) * Change ax8817x_set_multicast to not kmalloc for the filter since there was no clean way to free the memory after URB submit. Instead, we make use of the 20 byte dev->data. ChangeSet@1.1320.2.27, 2003-09-19 14:27:20-07:00, vojtech@suse.cz [PATCH] Fix memory leak in hiddev.c found by Stanford Checker ChangeSet@1.1320.2.26, 2003-09-19 14:27:08-07:00, vojtech@suse.cz [PATCH] Remove a not necessary #ifdef CONFIG_PROC_FS/#endif in input.c ChangeSet@1.1320.2.25, 2003-09-19 14:26:50-07:00, vojtech@suse.cz [PATCH] Fix a warning in input.c when CONFIG_PROC_FS is not set ChangeSet@1.1320.8.1, 2003-09-19 13:49:28-07:00, torvalds@laptop.osdl.org Merge http://lia64.bkbits.net/to-linus-2.5 into laptop.osdl.org:/home/torvalds/v2.5/linux ChangeSet@1.1320.5.4, 2003-09-19 15:20:02-05:00, sandeen@sgi.com [XFS] Update sysctls - use ints, not ulongs, and show pagebuf values in jiffies like everybody else SGI Modid: 2.5.x-xfs:slinx:158665a ChangeSet@1.1320.5.3, 2003-09-19 14:14:55-05:00, lord@sgi.com [XFS] Make xfs_ichgtime call mark_inode_dirty_sync instead of mark_inode_dirty makes the just the inode look dirty, and not the inode and the data. SGI Modid: 2.5.x-xfs:slinx:158670a ChangeSet@1.1320.1.16, 2003-09-19 13:52:18-03:00, acme@conectiva.com.br o LLC: rename llc_mac.c to llc_input.c, net/llc_mac.h to net/llc.h Next step: to have llc_build_and_send_ui_pkt in llc_output.c, not using the silly sap state machinery. ChangeSet@1.1320.7.11, 2003-09-19 17:42:24+01:00, rmk@flint.arm.linux.org.uk [ARM] Update bootp kernel+initrd loader. Drop support for old param struct method, and clean up code. ChangeSet@1.1320.7.10, 2003-09-19 17:26:49+01:00, rmk@flint.arm.linux.org.uk [ARM] Update mach-types with latest version. ChangeSet@1.1320.7.9, 2003-09-19 16:20:22+01:00, rmk@flint.arm.linux.org.uk [ARM] Fix AMBA keyboard/mouse driver. Fix the AMBA kmi driver which got broken when the name field was removed from struct device. Change the name used to claim resources to "kmi-pl050". Fix resume method. ChangeSet@1.1320.7.8, 2003-09-19 15:58:18+01:00, rmk@flint.arm.linux.org.uk [ARM] Optimise io-writesl for cpus with ldr result delays. ChangeSet@1.1320.7.7, 2003-09-19 15:49:37+01:00, nico@org.rmk.(none) [ARM PATCH] 1528/1: big endian support for io-readsb/io-writesb Patch from Nicolas Pitre ChangeSet@1.1320.7.6, 2003-09-19 15:45:48+01:00, rmk@flint.arm.linux.org.uk [ARM] Optimise io-readsb for CPUs with delay slots after ldr. ChangeSet@1.1320.7.5, 2003-09-19 14:50:07+01:00, rmk@flint.arm.linux.org.uk [ARM] Place initial data/code in assembly into the correct section We were mixing some data and code in the processor support assembly files. Place the correct objects into their respective sections. ChangeSet@1.1320.7.4, 2003-09-19 14:04:10+01:00, rmk@flint.arm.linux.org.uk [ARM] Fix abort handler typo affecting Xscale CPUs. ChangeSet@1.1320.4.2, 2003-09-19 07:38:33-05:00, nathans@sgi.com [XFS] Fix some compile warnings and errors from some long-forgotten 2.4 mods SGI Modid: 2.5.x-xfs:slinx:158642a ChangeSet@1.1320.6.16, 2003-09-19 13:51:40+02:00, bunk@fs.tum.de input: Fix Kconfig KEYBOARD_ATKBD when SERIO is modular. ChangeSet@1.1320.6.15, 2003-09-19 13:32:38+02:00, vojtech@suse.cz input: Fix memory leak in hiddev.c found by Stanford Checker. ChangeSet@1.1320.6.14, 2003-09-19 13:25:06+02:00, lcapitulino@prefeitura.sp.gov.br input: Remove a not necessary #ifdef CONFIG_PROC_FS/#endif in input.c ChangeSet@1.1320.6.13, 2003-09-19 13:23:54+02:00, lcapitulino@prefeitura.sp.gov.br input: Fix a warning in input.c when CONFIG_PROC_FS is not set. ChangeSet@1.1320.6.12, 2003-09-19 13:15:12+02:00, Andries.Brouwer@cwi.nl input: Fix Set3 keycode for right control in atkbd.c ChangeSet@1.1320.7.3, 2003-09-19 11:55:41+01:00, rmk@flint.arm.linux.org.uk [ARM] Correct comments for abort handler parameters. ChangeSet@1.1320.7.2, 2003-09-19 10:03:54+01:00, rmk@flint.arm.linux.org.uk [ARM] Remove private %_config makefile rule ChangeSet@1.1320.7.1, 2003-09-19 09:53:36+01:00, rmk@flint.arm.linux.org.uk [ARM] Massive rename of default configuration files. This renames all 48 (800K-ish of) ARM default configuration files, as required by Sam's latest default configuration file system. ChangeSet@1.1320.6.11, 2003-09-19 01:25:39-07:00, dtor_core@ameritech.net serio.c: claim serio early in serio_open() ChangeSet@1.1320.6.10, 2003-09-19 01:24:36-07:00, oliver@neukum.org iforce-usb.c, iforce-packets.c: Fix I-Force sleeping issues. ChangeSet@1.1320.6.9, 2003-09-19 01:23:29-07:00, vojtech@suse.cz psmouse-base.c: Enlarge the timeout for PS/2 mouse full reset. ChangeSet@1.1320.6.8, 2003-09-19 01:22:06-07:00, vojtech@suse.cz input.h, keyboard.c, evdev.c: Fix the INPUT_KEYCODE macro and its usage. ChangeSet@1.1320.6.7, 2003-09-19 01:20:33-07:00, vojtech@suse.cz psmouse-base.c: Make sure psmouse->pktcnt is zero after passing a byte to be processed by synaptics code. ChangeSet@1.1320.6.6, 2003-09-19 01:19:41-07:00, vojtech@suse.cz psmouse-base.c: Change the name od the Synaptics protocol to SynPS/2 ChangeSet@1.1320.6.5, 2003-09-19 01:18:46-07:00, petero2@telia.com psmouse-base.c: Fix resume of PS/2 mouse. Uses old PM interface at the moment. ChangeSet@1.1320.6.4, 2003-09-19 01:17:37-07:00, petero2@telia.com Input: Big Synaptics update: Restore synaptics pad mode on module unload. Support Synaptics touchpads with multiple buttons. Make Synaptics touchpad support optional. Add passthrough support for Synaptics touchpads. [Dmitry] Add support for old Synaptics protocol. Set mode byte correctly for old Synaptics pads. Fix multibutton support of Synaptics pads. ChangeSet@1.1320.6.3, 2003-09-19 01:01:20-07:00, vojtech@suse.cz db9.c: input: Fix Sega Saturn pad support. ChangeSet@1.1320.6.2, 2003-09-19 00:58:34-07:00, vojtech@suse.cz input.c: input: Don't set autorepeat times in core if already set by driver. atkbd.c: input: Automatic forced release of keys if keyrelease gets lost ChangeSet@1.1320.6.1, 2003-09-19 00:20:17-07:00, petero2@telia.com synaptics.c, psmouse-base.c: input: Restore synaptics pad mode on module unload. ChangeSet@1.1320.4.1, 2003-09-18 21:36:31-05:00, lord@jen.americas.sgi.com [XFS] Fix initialization of inode flags from xfs inode fields. ChangeSet@1.1320.2.22, 2003-09-18 18:58:50-07:00, Andries.Brouwer@cwi.nl [PATCH] fix keycode for rctrl in scancode set 3 By mistake the keycode for right control in scancode set 3 was the same as that for right alt. This fixes that. ChangeSet@1.1320.2.21, 2003-09-18 18:58:32-07:00, axboe@suse.de [PATCH] io scheduler barrier fix From: Nick Piggin This should be the last piece to ensure correct barrier handling for AS and DL? ChangeSet@1.1320.1.15, 2003-09-18 19:34:00-03:00, acme@conectiva.com.br o LLC: create a register interface for llc_station_rcv ChangeSet@1.1315.9.29, 2003-09-18 14:33:50-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (9 of 9) This patch implements the change discussed last weekend. Rather than allocating separate memory areas for the "extra" descriptors and copying the descriptor contents, it simply makes the "extra" pointers refer to memory within the rawdescriptor arrays. ChangeSet@1.1315.9.28, 2003-09-18 14:33:32-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (8 of 9) This patch adds some extra error checking. The patch-comments list most it. Particularly worth noting is the check on the endpoint addresses. Since these addresses are used as indexes for the epmaxpacketin and epmaxpacketout arrays, illegal values could result in overwriting unrelated areas of memory. Other noteworthy checks involve interface and alsetting numbers. Since the old code ignored those values, of course it didn't bother to check them. Here we make sure that the numbers lie in the proper ranges and that there are no "missing" entries. Add error checking and improved error messages: Check for invalid endpoint descriptors and invalid endpoint addresses. Check for duplicate interface/altsetting descriptors. Check for invalid configuration descriptors. Check for missing interface/altsetting descriptors. ChangeSet@1.1315.9.27, 2003-09-18 14:33:14-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (7 of 9) This patch changes the usb_parse_interface() routine so that it only handles a single interface/altsetting descriptor at a time, rather than trying to handle all the altsettings for an interface at once. Besides shrinking the code slightly, this has the advantage of not requiring the interfaces to be listed in order or all the altsetting descriptors for an interface to be contiguous. While there probably aren't any devices that have _discontiguous_ altsetting descriptors, there's no harm in allowing it -- particularly since doing so provides an overall simplification. This is another of those hard-to-read patches. It moves most of the body of the usb_parse_interface() function out of a loop, thereby changing the indentation level without actually altering the code. ChangeSet@1.1315.9.26, 2003-09-18 14:15:11-07:00, greg@kroah.com [PATCH] USB: unusual device fixup for the Y-E floppy drive. ChangeSet@1.1315.4.7, 2003-09-18 20:55:41+01:00, davej@redhat.com [CPUFREQ] Explicitly disable scaling we don't need in powernow-k7 The VIDC/FIDC controls could have been left at 1 from a previous call to one of the scaling routines. Make sure we set them back to 0 to avoid writing garbage into the scaling registers. ChangeSet@1.1315.4.6, 2003-09-18 20:47:26+01:00, davej@redhat.com [CPUFREQ] Powernow-k7 latency timer needs to be in values of 10ns. We were 'slightly' off in our calculations. This increased settling time might actually increase the stability of some setups. ChangeSet@1.1315.4.5, 2003-09-18 20:36:26+01:00, davej@redhat.com [CPUFREQ] Work around buggy powernow-k7 BIOSes with low settling times. ChangeSet@1.1315.4.4, 2003-09-18 20:33:30+01:00, davej@redhat.com [CPUFREQ] We need to set SGTC when we change powernow-k7 voltage. ChangeSet@1.1217.3.39, 2003-09-18 12:15:04-07:00, bjorn.helgaas@hp.com [PATCH] ia64: trivial sba_iommu patch I'm aligning the 2.4 and 2.5 versions of arch/ia64/hp/common/sba_iommu.c and found a couple nits in the 2.5 version. No functional change, just whitespace, comment, and parameter name changes (and I made one function static). ChangeSet@1.1217.3.38, 2003-09-18 12:11:58-07:00, jes@wildopensource.com [PATCH] ia64: fix for include/asm-ia64/acpi.h asm/acpi.h relies on struct pci_vector_struct which is defined in asm/system.h. ChangeSet@1.1217.3.37, 2003-09-18 12:10:35-07:00, jes@wildopensource.com [PATCH] ia64: include/asm-ia64/sn/router.h cleanup Minor cleanup. ChangeSet@1.1217.3.36, 2003-09-18 12:09:27-07:00, jes@wildopensource.com [PATCH] ia64: sn2 header file cleanup This patch removes a ton of pointless big endian defines for some registers on SN2 and cleans up the #include hierachy making it include some really big header files only when they are really needed. ChangeSet@1.1217.3.35, 2003-09-18 12:07:24-07:00, eranian@hpl.hp.com [PATCH] ia64: pass si_isr for a few more signal sources This patch changes the kernel such that si_isr gets setup for hardware breakpoints, single-step, and taken-branch traps. This is useful, e.g., to determine what kind of hw breakpoint triggered the signal. ChangeSet@1.1217.3.34, 2003-09-18 12:04:44-07:00, jes@wildopensource.com [PATCH] ia64: small sn2 cleanup Attached is a small cleanup patch for the sn2 header files which removes some cases of excessive header file inclusion. ChangeSet@1.1217.3.33, 2003-09-18 12:03:39-07:00, davidm@tiger.hpl.hp.com ia64: Control /proc/bus/mckinley/zx1 via separate SBA_PROC_FS macro and turn SBA_PROC_FS off by default (it's too much of a scalability bottleneck). ChangeSet@1.1315.4.3, 2003-09-18 11:17:21+01:00, davej@redhat.com [CPUFREQ] Read MSRs before trying to use them in powernow-k7 Very silly bug spotted by Ducrot Bruno ChangeSet@1.1320.1.14, 2003-09-18 00:39:16-03:00, acme@conectiva.com.br o LLC: create llc_output and move lan_hdrs_init to it Renaming lan_hdrs_init to llc_mac_hdr_init and making all places check if it fails. ChangeSet@1.1217.3.32, 2003-09-17 18:59:48-07:00, davidm@tiger.hpl.hp.com ia64: In , do not include outside the #ifdef __KERNEL__ bracket. Doing so pollutes the user- level namespace. Bug report & proposed fix by GOTO Masanori. ChangeSet@1.1315.5.5, 2003-09-18 02:25:39+01:00, davej@redhat.com [AGPGART] Fix module alias. From OGAWA Hirofumi ChangeSet@1.1315.9.25, 2003-09-17 17:59:57-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (6 of 9) This patch removes the home-brewed resizeable arrays used to store altsetting structures, along with the now-unneeded max_altsetting field. Since we are already making a preliminary pass through all the descriptors to check their lengths, we take the opportunity to also count the number of altsetting descriptors for each interface. Then exactly the right number can be allocated all at once. This also moves the code that allocates the altsettings outside the usb_parse_interface() routine. Though not important now, this change will come in handy in the next patch. ChangeSet@1.1315.9.24, 2003-09-17 17:59:40-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (5 of 9) This patch centralizes the error checking for invalid descriptor lengths and unexpected descriptor types. Instead of doing it in three different places -- while parsing configuration, interface, and endpoint descriptors -- the new code does it all at once. Not surprisingly, this yields a net savings in code size. ChangeSet@1.1315.9.23, 2003-09-17 17:09:21-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (4 of 9) Although it's hard to tell from reading the patch, this just moves one section of code to a slightly different spot. Currently the code that skips over the extra class- and vendor-specific configuration-related descriptors is part of the loop that parses interface descriptors. The patch moves it outside, immediately before that loop -- where it belongs. ChangeSet@1.1315.9.22, 2003-09-17 17:09:04-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (3 of 9) This patch includes a bunch of little local improvements to the code, listed in the patch comments. There are only two notable changes. If a device has more configurations than our maximum, the code doesn't reject the device but simply parses as many configurations as it can and ignores the rest. Likewise, if a configuration contains too many interfaces, the code parses as many as it can and skips the excess. That way such devices will be at least partially useable. Since these limits are arbitrary and set by the implementation (not part of the USB spec), it doesn't make sense to reject a device that violates them. Numerous local programming improvements: Don't initialize to 0 fields in structures that have been memset to 0. Don't constantly keep track of how many bytes are parsed. Use local variables to hold unwieldy values. Remove redundant tests. Allow devices to have more configurations or interfaces than we can handle. ChangeSet@1.1315.9.21, 2003-09-17 17:08:46-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (2 of 9) This patch fixes the most blatant problems that can happen when an error is encountered during descriptor parsing. The struct device embedded within a struct usb_interface is initialized as soon as the structure is allocated, so that when put_device() is called it will contain valid data. put_device() is not called for unallocated interfaces. The pointers in config->extra are freed when the struct usb_host_config is freed. rawdescriptor pointers are initialized to 0 so that they can be freed without error. Partially parsed configurations are remembered so that they will be deallocated when the entire struct usb_device is freed. ChangeSet@1.1315.9.20, 2003-09-17 17:06:26-07:00, david-b@pacbell.net [PATCH] USB: psdocs fails for usbgadget It updates the "gadget" kerneldoc, removing some (new) warnings, and showing some fields it hadn't previously been showing (due to limitations in docproc). Plus it adds a bit of information about recent changes (new drivers). ChangeSet@1.1315.9.19, 2003-09-17 17:06:09-07:00, dan@reactivated.net [PATCH] USB: Debug code fixes for dabusb ChangeSet@1.1315.9.18, 2003-09-17 16:54:30-07:00, greg@kroah.com [PATCH] USB: make sure we never reference a usbserial port after it has been unregistered. ChangeSet@1.1315.9.17, 2003-09-17 14:20:32-07:00, stern@rowland.harvard.edu [PATCH] USB: Changes to core/config.c (1 of 9) This first patch makes only trivial changes. Excess whitespace at the end of lines is removed and return codes are altered from -1 to symbolic error values. The only significant difference is that in one spot a valid return is changed to an error return, when a descriptor does not have the correct type. - Remove excess whitespace at the ends of lines. - Change return codes to symbolic values. - Return an error when an invalid endpoint descriptor is found. ChangeSet@1.1315.9.16, 2003-09-17 14:20:01-07:00, rwhron@earthlink.net [PATCH] [PATCH] drivers/usb version/include cleanup Remove unneeded version.h and doubley included header. Test compiled on 2.6.0-test5-bk3. ChangeSet@1.1315.9.15, 2003-09-17 14:18:13-07:00, dan@reactivated.net [PATCH] USB: Debug code fixes for usblp When compiling usblp with debug info, a compile error occurs. I presume this is because this part of the code has not been updated since the 2.4 kernels. This patch fixes this. I also enhanced the debug output a little, as suggested by Randy Dunlap. ChangeSet@1.1315.9.14, 2003-09-17 14:17:50-07:00, dan@reactivated.net [PATCH] USB: Debug code fixes for vicam When compiling vicam with debug info, a compile error occurs. I presume this is because this part of the code has not been updated since the 2.4 kernels. This patch fixes this. ChangeSet@1.1320.2.18, 2003-09-17 13:56:41-07:00, shemminger@osdl.org [PATCH] (2/2) drivers/char/misc -- seq_file Use seq_file for /proc/misc ChangeSet@1.1320.2.17, 2003-09-17 13:56:30-07:00, shemminger@osdl.org [PATCH] drivers/char/misc -- use list() macros Use list macros for misc_device list. ChangeSet@1.1320.1.13, 2003-09-17 17:41:39-03:00, acme@conectiva.com.br o LLC: add some unlikely wrappings in llc_mac Also rename fix_up_incoming_skb to llc_fixup_skb, to be more namespace friendly. Ah, make it inline too. ChangeSet@1.1320.2.16, 2003-09-17 13:23:06-07:00, andrew.grover@intel.com [PATCH] ACPI maintainer change This updates the maintainer entry for ACPI. Len has already assumed most of this responsibility, as other projects demand my attention. My team will continue to maintain the OS-independent ACPI CA release, but Len will be responsible for pulling ACPI CA updates into the Linux release, and the rest of Linux-specific code in general. ChangeSet@1.1320.2.15, 2003-09-17 13:22:54-07:00, rmk@arm.linux.org.uk [PATCH] Make /proc/kcore configurable This allows /proc/kcore to be entirely disabled and dropped out of the kernel - we already select between a.out and ELF. Right now it only drops /proc/kcore out of the kernel for ARM. ChangeSet@1.1320.2.14, 2003-09-17 13:22:37-07:00, marcelo.tosatti@cyclades.com.br [PATCH] WM9712 suspend/resume nopop From: Liam Girdwood This patch eliminates pop noises when doing a PM suspend/resume with the WM9712 AC97 codec. ChangeSet@1.1320.2.13, 2003-09-17 13:22:25-07:00, axboe@suse.de [PATCH] shared block queue tag map This implements the possibility for sharing a tag map between queues. Some (most?) scsi host adapters needs this, and SATA tcq will need it for some cases, too. ChangeSet@1.1320.2.12, 2003-09-17 13:22:12-07:00, axboe@suse.de [PATCH] ide-cd capacity "bug" From Daniel Pittman Using the lra (last recorded address) isn't always reliable on some drives, so use the regular TOC if it returns 0 capacity. ChangeSet@1.1320.2.11, 2003-09-17 13:21:55-07:00, Urban.Widmark@enlight.net [PATCH] smbfs module unload and highuid I haven't been doing much smbfs work recently, but here are some bugfixes: - Fix module unload (Angus Sawyer). - Fix the smbfs error handling if kernel_thread() should fail. - Allow high uids/gids to be used as the fake uid smbfs sets as file owner. ChangeSet@1.1320.2.10, 2003-09-17 13:21:43-07:00, piggin@cyberone.com.au [PATCH] AS documentation The as-iosched.c source code has said this is here for a long time but it kept getting lost. ChangeSet@1.1320.2.9, 2003-09-17 13:21:27-07:00, chrisw@osdl.org [PATCH] root_plug fixup From: bert hubert LSM: To recap, this patch allows root_plug to work again. It needs functions that used to reside in capability.c but linking in capability.c, disabled root_plug from loading, as a security module is already present then. This patch splits out the functions root_plug needs from capability.c. ChangeSet@1.1320.2.8, 2003-09-17 13:21:14-07:00, chrisw@osdl.org [PATCH] LSM comment fixup From: John Levon LSM: Update comments in register_security to reflect reality ChangeSet@1.1320.2.7, 2003-09-17 13:21:01-07:00, chrisw@osdl.org [PATCH] Add LSM maintainer entry Add LSM maintainer entry ChangeSet@1.1320.2.6, 2003-09-17 13:20:43-07:00, chrisw@osdl.org [PATCH] update credits Update CREDITS with new contact info. ChangeSet@1.1315.9.13, 2003-09-17 12:20:18-07:00, nikai@nikai.net [PATCH] USB: Remove modules.txt: usb serial & storage ChangeSet@1.1315.9.12, 2003-09-17 12:18:01-07:00, nikai@nikai.net [PATCH] USB: Remove modules.txt: usb_media, usb_input ChangeSet@1.1315.5.4, 2003-09-17 18:53:22+01:00, davej@redhat.com [AGPGART] Add HP AGP 8x bridge and fix ACPI claim The following patch to the HP ZX1 GART driver - adds recognition of the "HWP0007" device (an AGP 8X bridge) - fixes the use of acpi_get_devices() The problem with acpi_get_devices() is that it always returns AE_OK, except when the callback (zx1_gart_probe()) returns a failure. That means agp_hp_init() cannot use the status from acpi_get_devices() to distinguish between (1) an AGP bridge was found and successfully initialized, and (2) no AGP bridge was found at all. ChangeSet@1.1320.3.1, 2003-09-17 16:57:12+01:00, rmk@flint.arm.linux.org.uk [PCMCIA] Fix bug in PCMCIA resource management memory probing This prevents us from probing past the memory areas which cardmgr passes us, and also allows us to correctly remove areas which we decide are not available for PCMCIA use. ChangeSet@1.1315.6.13, 2003-09-17 10:34:24-05:00, lord@sgi.com [XFS] fix build for gcc 3.2 SGI Modid: 2.5.x-xfs:slinx:158511a ChangeSet@1.1315.8.14, 2003-09-17 13:51:46+01:00, rmk@flint.arm.linux.org.uk [ARM] Ensure that MM initialisation warnings are reported as bugs. ChangeSet@1.1315.8.13, 2003-09-17 13:43:47+01:00, rmk@flint.arm.linux.org.uk [ARM] Update machine types list. ChangeSet@1.1315.8.12, 2003-09-17 13:39:26+01:00, rmk@flint.arm.linux.org.uk [ARM] Dynamically allocate SA1111 component devices. ChangeSet@1.1315.6.12, 2003-09-17 07:28:02-05:00, lord@jen.americas.sgi.com [XFS] Some tweaks to the additional inode flags, suggested by Ethan Benson SGI Modid: 2.5.x-xfs:slinx:158493a ChangeSet@1.1315.8.11, 2003-09-17 12:47:14+01:00, rmk@flint.arm.linux.org.uk [ARM] Clean up PCI error reporting. Don't try to clear PCI status on devices which are no longer present. Only clear PCI status bits which we're interested in. Use pci_name to report the device name. ChangeSet@1.1315.8.10, 2003-09-17 12:21:55+01:00, rmk@flint.arm.linux.org.uk [ARM] Provide bus type and support for logic modules. The IMPD-1 is a logic module (a stackable module) - rather than trying to abuse platform devices, create our own bus type to handle these. ChangeSet@1.1320.1.12, 2003-09-17 01:16:59-03:00, acme@conectiva.com.br o LLC: split llc into llc_core and llc2 modules For this some more functions had to be moved around, now one doesn't have to explicitely select LLC to have access in the menu to ipx, appletalk, token ring, etc. This is not yet as good as I want it to be, but at least makes it easier for the hordes of users to select stuff, making it look more like how it was in 2.4. In the next changesets I'll fix the fact that CONFIG_TR is a bool and makes psnap, p8022 and llc_core to be built statically even tho the token ring drivers are being build as modules. ChangeSet@1.1320.1.11, 2003-09-17 01:02:41-03:00, acme@conectiva.com.br o LLC: implement llc_add_pack/llc_remove_pack ChangeSet@1.1320.2.2, 2003-09-16 18:07:17-07:00, shemminger@osdl.org [PATCH] use seq_lock for monotonic time Monotonic clock code uses reader/writer lock which is prone to same starvation problems as we saw with xtime. This patch changes it to seq_lock which is faster and won't starve writers in face of lots of readers. ChangeSet@1.1315.4.2, 2003-09-17 02:04:11+01:00, davej@redhat.com [CPUFREQ] Add missing config.h includes ChangeSet@1.1315.5.3, 2003-09-17 01:58:33+01:00, davej@redhat.com [AGPGART] Fix missing/bogus includes. ChangeSet@1.1315.10.5, 2003-09-16 17:33:57-07:00, jaharkes@cs.cmu.edu [PATCH] Coda updates [5/5] Introduce a new kernel-userspace interface that uses 128-bit file identifiers instead of the previously used 96-bit fileids. We also replacing the coda_creds structure with only the fsuid. This new API has been used by for a couple of months now, people had to patch their kernels whenever they want to run a current Coda release. A new Kconfig option is added to fall back on the old API for older Coda clients and other userspace filesystems that might use our protocol. ChangeSet@1.1315.10.4, 2003-09-16 17:33:45-07:00, jaharkes@cs.cmu.edu [PATCH] Coda updates [4/5] The ViceFid structure is really a Coda server datatype and the kernel really shouldn't have to know its internal structure. Replace all instances with struct CodaFid with opaque members. ChangeSet@1.1315.10.3, 2003-09-16 17:33:32-07:00, jaharkes@cs.cmu.edu [PATCH] Coda updates [3/5] Both userspace and the kernel are testing only the fsuid part of the coda_creds credentials structure. Nothing else is really used, so we now match the code with the actual usage by only passing fsuid around. The kernel-userspace API is kept compatible (for now). ChangeSet@1.1315.10.2, 2003-09-16 17:33:13-07:00, jaharkes@cs.cmu.edu [PATCH] Coda updates [2/5] Use a global 'epoch' counter to invalidate cached permissions instead of traversing a racy linked list of all known Coda inodes. ChangeSet@1.1315.10.1, 2003-09-16 17:32:51-07:00, jaharkes@cs.cmu.edu [PATCH] Coda updates [1/5] - Remove unused functions and variables. - Be a bit more strict with the definition of various types that are shared between kernel and userspace. - Included a couple of cleanups from Maximilian Attems and Stephen Hemminger. ChangeSet@1.1315.8.9, 2003-09-16 23:41:39+01:00, rmk@flint.arm.linux.org.uk [ARM] Fix name of "cache format" cpuinfo description. ChangeSet@1.1315.8.8, 2003-09-16 23:21:07+01:00, rmk@flint.arm.linux.org.uk [ARM] Kill gcc preprocessor warning. ChangeSet@1.1315.8.7, 2003-09-16 23:14:24+01:00, rmk@flint.arm.linux.org.uk [ARM] Remove CONFIG_KBDMOUSE from arch/arm/Kconfig ChangeSet@1.1315.8.6, 2003-09-16 22:49:30+01:00, rmk@flint.arm.linux.org.uk [ARM] Fix gcc3 multi-line string literal build error. ChangeSet@1.1315.8.5, 2003-09-16 22:44:42+01:00, rmk@flint.arm.linux.org.uk [ARM] Add newly discovered CR register function. ChangeSet@1.1315.8.4, 2003-09-16 22:40:21+01:00, rmk@flint.arm.linux.org.uk [ARM] Provide __HAVE_ARCH_BCOPY This squashes another compiler warning. ChangeSet@1.1315.8.3, 2003-09-16 22:31:42+01:00, rmk@flint.arm.linux.org.uk [ARM] Detect and fix up CPUs with non-coherent write buffers. Jamie Lokier's cache testing program discovered a problem which seems to be present in some CPU write buffers. This cset allows the kernel to detect the flaw and activate a workaround to restore the user space expectations. ChangeSet@1.1315.9.11, 2003-09-16 13:42:41-07:00, stern@rowland.harvard.edu [PATCH] USB: Use num_altsetting in usbnet and usbtest This patch fixes usbnet and usbtest. When checking endpoints, they iterate through all interfaces out to intf->max_altsetting, but they should only go up to intf->num_altsetting. The max_altsetting value refers to the amount of space _allocated_ for usb_host_interface structures, not the number that are really in use. ChangeSet@1.1320.1.10, 2003-09-16 16:15:02-03:00, acme@conectiva.com.br o LLC: move the pdu routines needed by the upcoming llc_core to llc_pdu.h Making them inline, as they are small enough and some very seldomly used. ChangeSet@1.1315.8.2, 2003-09-16 19:46:00+01:00, rmk@flint.arm.linux.org.uk [ARM] Update ARM CPU support. Move ARM CPU configuration to arch/arm/mm. Seperate out the selection of the abort, cache handling, optimised page copying and TLB handling from the Makefile, and move it into the configuration system. This allows us to select the correct files in arch/arm/mm and pick the appropriate definitions in include/asm-arm/* based upon a config symbol rather than a bunch of configuration symbols. Also add ARM1020E, ARM1022 and ARM1026 CPU support. ChangeSet@1.1315.9.10, 2003-09-16 11:40:50-07:00, greg@kroah.com [PATCH] USB: fix up missing in usb documentation. This fixes build problem. ChangeSet@1.1315.9.9, 2003-09-16 11:40:17-07:00, ramune@net-ronin.org [PATCH] USB: make pdfdocs problem The `make pdfdocs' target still fails for me on the `writing_usb_drivers' document. There's one small bug in it, and one problem I haven't figured out yet. There is a malformed blah sequence, where the closing tag is instead an opening tag. Patch for that below. ChangeSet@1.1320.1.9, 2003-09-16 15:29:07-03:00, acme@conectiva.com.br o LLC: move llc_lookup_dgram to llc_sap Also move llc_save_primitive to llc_sap, almost untangling the LLC2 stack from the core. ChangeSet@1.1315.9.8, 2003-09-16 11:28:17-07:00, david-b@pacbell.net [PATCH] USB: usb/gadget/Kconfig, use right PXA2xx symbols I just noticed that Linus' tree is using the wrong CONFIG_* symbols for kicking in the PXA 2xx support (except for "gadgetfs"). It should use USB_PXA2XX not USB_PXA250, since it handles PXA 255, PXA 210, PXA 263, and others. ChangeSet@1.1315.9.7, 2003-09-16 11:28:01-07:00, zaitcev@redhat.com [PATCH] USB: Drop debounce printout for 2.6 This seems to work well enough, we do not need the printout anymore. ChangeSet@1.1315.9.6, 2003-09-16 11:18:25-07:00, baldrick@free.fr [PATCH] USB speedtouch: bump the version number ChangeSet@1.1315.9.5, 2003-09-16 11:18:08-07:00, baldrick@free.fr [PATCH] USB speedtouch: neater sanity check Biscuit for Greg. ChangeSet@1.1315.9.4, 2003-09-16 11:17:53-07:00, baldrick@free.fr [PATCH] USB: New email address for duncan ChangeSet@1.1315.9.3, 2003-09-16 11:17:37-07:00, baldrick@free.fr [PATCH] USB speedtouch: use multiple urbs by default ChangeSet@1.1320.1.8, 2003-09-16 14:53:38-03:00, acme@conectiva.com.br o LLC: move llc_build_and_send_ui_pkt to llc_sap ChangeSet@1.1315.9.2, 2003-09-16 10:53:37-07:00, greg@kroah.com [PATCH] USB: fix oops in ipaq driver Should fix bug number 1227 ChangeSet@1.1315.9.1, 2003-09-16 10:47:50-07:00, greg@kroah.com [PATCH] USB: fix oops when trying to suspend and resume. Thanks to Pavel for the original version of this patch. ChangeSet@1.1320.1.7, 2003-09-16 14:32:26-03:00, acme@conectiva.com.br o LLC: move the sockets release function outside of llc_sap_close ChangeSet@1.1320.1.6, 2003-09-16 12:45:42-03:00, acme@conectiva.com.br o LLC: move sap functions to llc_sap ChangeSet@1.1315.6.11, 2003-09-16 10:07:58-05:00, nathans@sgi.com [XFS] Automatically set logbsize for larger stripe units SGI Modid: 2.5.x-xfs:slinx:157534a ChangeSet@1.1320.1.5, 2003-09-16 12:01:48-03:00, acme@conectiva.com.br o LLC: move the connection related functions to llc_conn ChangeSet@1.1315.8.1, 2003-09-16 15:14:41+01:00, rmk@flint.arm.linux.org.uk [ARM] Remove compiler warning in sa1111-pcipool.c ChangeSet@1.1315.7.1, 2003-09-16 07:24:02-05:00, shaggy@shaggy.austin.ibm.com JFS: Fix rampant data corruption A recent change causes pervasive data corruption by over-writing inode metadata with a word of garbage. The field, di_rdev, should only be set for a device inode. ChangeSet@1.1330, 2003-09-15 22:50:21-07:00, mitch@sfgoth.com [NET]: Tiny af_packet.c cleanup. ChangeSet@1.1320.1.4, 2003-09-16 02:00:17-03:00, acme@conectiva.com.br o LLC: remove another silly net 4.0 banner Also add a prototype for llc_conn_rcv, that will move away in the next changesets. but for now is needed to kill a warning. ChangeSet@1.1320.1.3, 2003-09-16 01:45:09-03:00, acme@conectiva.com.br o LLC: move llc_conn_handler and llc_sap_handler out of llc_mac ChangeSet@1.1320.1.2, 2003-09-16 01:18:03-03:00, acme@conectiva.com.br o LLC: move llc_decode_pdu_type to llc_mac And also rename it to llc_pdu_type and make it return the type, this is to make llc_mac more and more autonomous of the rest of the llc code, to the point where it will be a separate loadable module. ChangeSet@1.1320.1.1, 2003-09-16 00:52:17-03:00, acme@conectiva.com.br o LLC: introduce llc_type_handlers This is the start of the split of LLC into a core part and the bigger, not needed by ipx, token ring, appletalk, etc, LLC2 stack. ChangeSet@1.1315.5.2, 2003-09-16 01:04:25+01:00, davej@redhat.com [AGPGART] Missing prefixes in printk's ChangeSet@1.1315.1.8, 2003-09-15 16:54:37-07:00, rwhron@earthlink.net [PATCH] I2C: drivers/i2c version.h cleanup remove unnecessary version.h from drivers/i2c. test compiled with 2.6.0-test5-bk2 on x86. ChangeSet@1.1315.1.7, 2003-09-15 16:53:41-07:00, mporter@kernel.crashing.org [PATCH] I2C: New PPC4xx I2C driver This updates the current 2.6 PPC 4xx driver to the rewritten version we have in the PPC development tree. It is cleaner, has less bugs, and has more features. ChangeSet@1.1315.1.6, 2003-09-15 16:44:07-07:00, greg@kroah.com [PATCH] I2C: turn off debugging on the new sis i2c bus drivers. Forgot to do this before... ChangeSet@1.1315.1.5, 2003-09-15 16:38:32-07:00, greg@kroah.com [PATCH] I2C: clean up the i2c bus Kconfig menu and help texts. ChangeSet@1.1315.1.4, 2003-09-15 16:37:19-07:00, greg@kroah.com [PATCH] I2C: add the i2c-via i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1328, 2003-09-15 16:36:53-07:00, shemminger@osdl.org [IPVS]: Convert to seq_file. ChangeSet@1.1327, 2003-09-15 16:30:00-07:00, chas@cmf.nrl.navy.mil [ATM]: [clip] Fix race between modifying entry->vccs and clip_start_xmit(). ChangeSet@1.1326, 2003-09-15 16:27:44-07:00, hadi@cyberus.ca [NET]: Make pfifo_fast actually report statistics. ChangeSet@1.1315.1.3, 2003-09-15 16:15:33-07:00, greg@kroah.com [PATCH] I2C: add the i2c-sis630 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1325, 2003-09-15 16:12:08-07:00, davem@nuts.ninka.net [NET]: Increase ethernet tx_queue_len to 1000. ChangeSet@1.1324, 2003-09-15 16:10:34-07:00, dwmw2@infradead.org [BLUETOOTH]: Add missing owner to bnep_sock_family_ops. ChangeSet@1.1323, 2003-09-15 16:06:42-07:00, yoshfuji@linux-ipv6.org [NET]: Use proc_net_fops_create() for /proc/net/wireless ChangeSet@1.1322, 2003-09-15 15:59:27-07:00, yoshfuji@linux-ipv6.org [IPV4]: Convert /proc/net/pnp to seq_file. ChangeSet@1.1321, 2003-09-15 15:28:40-07:00, davem@nuts.ninka.net [UDP]: In udp_{v6_}flush_pending_frames, reset up->len too. ChangeSet@1.1217.3.31, 2003-09-15 15:24:02-07:00, eranian@hpl.hp.co [PATCH] ia64: minor perfmon2 patch This patch fixes a typo in pfm_write_pmcs() in the test for the default value. The code was using the lop index instead of the register index in the PMC_DFL_VAL() macro. This was causing valid values for some PMCs to be rejected. ChangeSet@1.1217.3.30, 2003-09-15 15:22:48-07:00, davidm@tiger.hpl.hp.com ia64: Re-enable /proc/sal support. Bug reported by Stephane Eranian, patch by Jesse Barnes. ChangeSet@1.1217.3.29, 2003-09-15 15:18:00-07:00, jbarnes@sgi.com [PATCH] ia64: protect PAL mapping printk with EFI_DEBUG Having this print out for every CPU on a large system was a pain, so protect the printk with EFI_DEBUG. ChangeSet@1.1217.3.28, 2003-09-15 15:16:29-07:00, jbarnes@sgi.com [PATCH] ia64: turn off SLIT debugging This code works pretty well now, so we don't need to dump all this stuff at boot time (esp. on 128 node systems). ChangeSet@1.1315.1.2, 2003-09-15 13:46:00-07:00, greg@kroah.com [PATCH] I2C: add the i2c-sis5595 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. ChangeSet@1.1315.6.10, 2003-09-15 14:03:40-05:00, cattelan@sgi.com [XFS] Fix from Christoph gcc 3.3 complains about this and indeed it can only trigger if someone magically enlarges __uint8_t :) SGI Modid: 2.5.x-xfs:slinx:157731a ChangeSet@1.1315.6.9, 2003-09-15 13:18:00-05:00, roehrich@sgi.com [XFS] Change dm_send_namesp_event to take vnode ptrs rather than bhv ptrs. SGI Modid: 2.5.x-xfs:slinx:157475a ChangeSet@1.1315.6.8, 2003-09-15 13:07:42-05:00, nathans@sgi.com [XFS] Alternate, cleaner fix for the ENOSPC/ACL lookup problem SGI Modid: 2.5.x-xfs:slinx:157531a ChangeSet@1.1315.6.7, 2003-09-15 13:03:45-05:00, cattelan@sgi.com [XFS] IRIX sets KM_SLEEP to 0 but the support routines sets KM_SLEEP to 1. So somebodys shortcut on irix is incorrect on linux and results in the sleep behaviour not being set. SGI Modid: 2.5.x-xfs:slinx:157773a ChangeSet@1.1315.6.6, 2003-09-15 12:58:34-05:00, nathans@sgi.com [XFS] Separate the big filesystems macro out into separate big inums and blknos macros; fix the check for too-large filesystems in the process. SGI Modid: 2.5.x-xfs:slinx:158361a ChangeSet@1.1315.6.5, 2003-09-15 12:57:15-05:00, nathans@sgi.com [XFS] Add inode64 mount option; fix case where growfs can push 32 bit inodes into 64 bit space accidentally - both changes originally from IRIX SGI Modid: 2.5.x-xfs:slinx:157935a ChangeSet@1.1315.6.4, 2003-09-15 12:50:46-05:00, sandeen@sgi.com [XFS] Re-work xfs stats macros to support per-cpu data SGI Modid: 2.5.x-xfs:slinx:156453a ChangeSet@1.1315.6.3, 2003-09-15 12:39:24-05:00, nathans@sgi.com [XFS] Implement several additional inode flags - immutable, append-only, etc; contributed by Ethan Benson. SGI Modid: 2.5.x-xfs:slinx:158362a ChangeSet@1.1315.6.2, 2003-09-15 12:29:36-05:00, sandeen@sgi.com [XFS] remove doubly-included header files SGI Modid: 2.5.x-xfs:slinx:157933a ChangeSet@1.1283.2.2, 2003-09-13 17:54:03+01:00, davej@redhat.com [AGPGART] Fix silly logic bug in modular AMD64 GART driver. We found a device, and then claimed we couldn't find one due to a silly thinko. agpgart: Detected AMD 8151 AGP Bridge rev B2 agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 64M @ 0xe0000000 No supported AGP bridge found. You can try agp_try_unsupported=1 ChangeSet@1.1153.108.31, 2003-09-13 17:46:42+01:00, davej@redhat.com [CPUFREQ] Fix up debug printk formatting string in speedstep-smi ChangeSet@1.1153.108.30, 2003-09-13 17:36:30+01:00, davej@redhat.com [CPUFREQ] use PFX macro in common printk's ChangeSet@1.1153.108.29, 2003-09-13 17:20:21+01:00, davej@redhat.com [CPUFREQ] Don't print out speedstep stuff on non-Intel CPUs. ChangeSet@1.1153.108.28, 2003-09-13 16:30:57+01:00, davej@redhat.com [CPUFREQ] CodingStyle fixes for speedstep-smi ChangeSet@1.1320, 2003-09-12 21:06:59-07:00, laforge@netfilter.org [NETFILTER]: Use u16 for port numbers. ChangeSet@1.1315.3.1, 2003-09-12 21:03:20-07:00, davem@nuts.ninka.net [SPARC64]: Make sure cpu_data[0].udelay_val gets setup on non-SMP (found by bde@nwlink.com). ChangeSet@1.1319, 2003-09-12 17:25:22-07:00, krkumar@us.ibm.com [IPV6]: Export devconf device settings via netlink. ChangeSet@1.1318, 2003-09-12 17:22:11-07:00, shemminger@osdl.org [NET]: Better proc_net macros for non-procfs case. ChangeSet@1.1315.2.2, 2003-09-12 17:14:53-07:00, acme@conectiva.com.br [NETFILTER]: Fix typo in recent ip_input.c changes. ChangeSet@1.1315.2.1, 2003-09-12 17:14:17-07:00, kpfleming@cox.net [NET]: Make netdevice.h more userspace friendly. ChangeSet@1.1217.7.2, 2003-09-12 16:58:01-07:00, greg@kroah.com [PATCH] I2C: remove some usages of i2c_adapter.id as they are not used. Seems i2c_adapter.id is only used in some video drivers, will work on cleaning up that mess later... ChangeSet@1.1316, 2003-09-12 08:45:11-07:00, maxk@qualcomm.com Merge bk://linux.bkbits.net/linux-2.5 into qualcomm.com:/home/kernel/bt-2.5 ChangeSet@1.1153.68.2, 2003-09-11 20:42:03-07:00, maxk@qualcomm.com [Bluetooth] Convert BNEP protocol to dynamic allocation of network devices. This will allow fixing races with rmmod and sysfs access. Patch from Stephen Hemminger ChangeSet@1.1283.4.5, 2003-09-11 19:31:44-07:00, davem@nuts.ninka.net [SPARC64]: Update defconfig. ChangeSet@1.1283.3.31, 2003-09-11 18:34:40-07:00, rusty@rustcorp.com.au [NETFILTER]: REJECT nonlinear fixes after sync with 2.4 Harald synced up ipt_REJECT.c from 2.4 route fixes, but it had changed a fair bit because of the nonlinear fixes. This repairs it. 1) Copying of tcp header onto stack. 2) ...which also checks length requirement. 3) Skip checksum check: requires linear packet. ChangeSet@1.1283.3.30, 2003-09-11 18:33:11-07:00, rusty@rustcorp.com.au [NETFILTER]: MASQUERADE target for mostly-static IP addresses. Herve Eychenne noted that many ADSL connections get the same address when the interface comes back up, so some users use SNAT instead of masquerade. The answer is that MASQUERADE should only drop connections when the interface comes up, and then only if the interface address has actually changed. ChangeSet@1.1283.4.4, 2003-09-11 18:32:39-07:00, mroos@linux.ee [SPARC64]: BUG on positive addresses in vga.h ChangeSet@1.1283.3.29, 2003-09-11 18:30:44-07:00, dwmw2@infradead.org [BLUETOOTH]: Fix bug in set_sk_owner() changes. ChangeSet@1.1283.4.3, 2003-09-11 18:29:23-07:00, wesolows@foobazco.org [SPARC32]: Ignore btfixups in .text.exit ChangeSet@1.1283.3.28, 2003-09-11 18:26:31-07:00, davej@redhat.com [IPV6]: Fix non-CONFIG_PROC_FS build. ChangeSet@1.1283.4.2, 2003-09-11 18:25:43-07:00, rob@osinvestor.com [SPARC32]: Non-controversial gcc-3.3 build fixes. ChangeSet@1.1283.3.27, 2003-09-11 18:23:45-07:00, chas@cmf.nrl.navy.mil [ATM]: exporting llc_oui[] isn't worth it (from mitch@sfgoth.com) ChangeSet@1.1283.3.26, 2003-09-11 18:22:34-07:00, chas@cmf.nrl.navy.mil [ATM]: seq_file conversion of /proc/net/atm [8/8] (from romieu@fr.zoreil.com) - introduction of the struct array 'atm_proc_ents': - removal of code duplication in atm_proc_cleanup(); - removal of code duplication in atm_proc_init(); - removal of the macros CREATE_SEQ_ENTRY() and CREATE_ENTRY(); - /proc/net/atm/vcc returns to /proc/net/atm/vc; - credits at the top of the file; - replaced proc_dev_atm_operations by proc_atm_dev_ops; - atm_proc_dev_register: removal of tasteless "fail0/fail1" labels. ChangeSet@1.1283.3.25, 2003-09-11 18:21:53-07:00, chas@cmf.nrl.navy.mil [ATM]: seq_file conversion of /proc/net/atm [7/8] seq_file support for /proc/net/atm/lec: - lec_info(): seq_printf/seq_putc replaces sprintf; - traversal of the lec structure needs to walk: -> the lec interfaces -> the tables of arp tables(lec_arp_tables); -> the arp tables themselves -> the misc tables (lec_arp_empty_ones/lec_no_forward/mcast_fwds) Sum up of the call tree: atm_lec_seq_start()/atm_lec_seq_next() -> atm_lec_get_idx() -> atm_lec_itf_walk() (responsible for dev_lec/dev_put handling) -> atm_lec_priv_walk() (responsible for lec_priv locking) -> atm_lec_arp_walk() -> atm_lec_tbl_walk() -> atm_lec_misc_walk() -> atm_lec_tbl_walk() Each of the dedicated functions follows the same convention: return NULL as long as the seq_file cursor hasn't been digested (i.e. until < 0). Locking is only done when an entry (i.e. a lec_arp_table) is referenced. atm_lec_seq_stop()/atm_lec_itf_walk()/atm_lec_priv_walk() are responsible for getting this point right. - module refcounting is done in atm_lec_seq_open()/atm_lec_seq_release(); - atm_lec_info() is removed. Chas's suggestions applied since last version: - atm_seq_lec_fops renamed to lec_seq_fops; - change in state handling: it wasn't correctly set to its reset value after a complete interface walk; - lec_arp_get_status_string() bugfix. ChangeSet@1.1283.3.24, 2003-09-11 18:21:05-07:00, chas@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (arp) [6/8] (from romieu@fr.zoreil.com) seq_file support for /proc/net/atm/arp: - svc_addr/atmarp_info(): seq_printf/seq_putc replace sprintf and friends; - arp_getidx/arp_vcc_walk() take care of the usual seq_file cursor positionning: they both return NULL until the cursor has reached its position. struct atm_arp_state is updated accordingly; - arp_seq_{stop/start} are responsible for clip_tbl_hook (un)locking; - module refcounting is done in arp_seq_open()/arp_seq_release(); - atm_lec_info() is removed. Chas's suggestions applied since last version: - atm_arp_xxx renamed to arp_xxx; - atm_seq_arp_fops renamed to arp_seq_fops. Chas didn't ask for it but I renamed arp_vc_walk to arp_vcc_walk. ChangeSet@1.1283.3.23, 2003-09-11 18:20:18-07:00, chas@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (vc) [5/8] (from romieu@fr.zoreil.com) seq_file support for /proc/net/atm/vc: Same comments as for pvc and svc. Extra Chas's suggestion applied since last version: - atm_vc_xxx renamed to vcc_xxx. ChangeSet@1.1283.3.22, 2003-09-11 18:19:37-07:00, chas@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (svc) [4/8] (from romieu@fr.zoreil.com) seq_file support for /proc/net/atm/svc: Exactly same comments as pvc. Just s/p/s/ ChangeSet@1.1283.3.21, 2003-09-11 18:18:48-07:00, char@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (pvc) [3/8] (from romieu@fr.zoreil.com) seq_file support for /proc/net/atm/pvc: - pvc_info(): seq_printf/seq_putc replaces sprintf; - atm_pvc_info() removal; - the vc helpers (vcc__seq_xxx) do the remaining work. Chas's suggestions applied since last version: - atm_pvc_xxx renamed to pvc_xxx - atm_seq_pvc_fops renamed to pvc_seq_fops ChangeSet@1.1283.3.20, 2003-09-11 18:17:56-07:00, char@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (vc utils) [2/8] (from romieu@fr.zoreil.com) Helpers for seq_file conversion of proc/atm/{pvc/svc/vc}: - struct vcc_state keeps 1) the struct sock from which the current struct atm_vcc is deduced 2) the family to which must belong the vcc (PF_ATM{SVC/PVC/any}) 3) the availability of clip module - vcc_seq{start/stop} are responsible for vcc_sklist locking - __vcc_seq_open and vcc_seq_release take care of get/put for the clip module. Chas's suggestions applied since last version: - atm_vc_xxx renamed to vcc_xxx - atm_vc_common_seq_open renamed __vcc_seq_open (future name clashes avoidance) ChangeSet@1.1283.3.19, 2003-09-11 18:16:57-07:00, char@cmf.nrl.navy.mil [ATM]: seq_file for /proc/net/atm (devices) [1/8] (from romieu@fr.zoreil.com) seq_file conversion for proc/atm/devices: - code inspired from seq_file use in net/core/dev.c; - atm_dev_lock taken/released in atm_dev_seq_{start/stop}; - add a helper CREATE_SEQ_ENTRY() similar to CREATE_ENTRY() (both are removed once conversion is done). - atm_dev_seq_{start/stop/next} done in net/atm/resource.[ch] to ease future handling of atm_devs and locking structure (per Chas suggestion) ChangeSet@1.1283.4.1, 2003-09-11 18:15:24-07:00, jfbeam@bluetronic.net [SPARC64]: Fix VT/VT_CONSOLE Kconfig for headless operation. ChangeSet@1.1283.3.18, 2003-09-11 18:10:53-07:00, shemminger@osdl.org [BRIDGE]: Clear hw checksum flags when bridging. ChangeSet@1.1283.3.17, 2003-09-11 18:09:18-07:00, yoshfuji@linux-ipv6.org [NET]: Use proc_net_fops_create() and proc_net_remove() in net/ipv6. ChangeSet@1.1283.3.16, 2003-09-11 18:08:54-07:00, yoshfuji@linux-ipv6.org [NET]: Use proc_net_fops_create() and proc_net_remove() in net/ipv4. ChangeSet@1.1283.3.15, 2003-09-11 18:08:19-07:00, yoshfuji@linux-ipv6.org [NET]: Use proc_net_fops_create() and proc_net_remove() in net/core. ChangeSet@1.1283.3.14, 2003-09-11 18:04:41-07:00, akpm@osdl.org [NET]: Remove spurious TASK_RUNNING setting after schedule_timeout(). ChangeSet@1.1283.3.13, 2003-09-11 17:01:21-07:00, herbert@gondor.apana.org.au [XFRM]: Fix ALLOC_SPI for IPCOMP. ChangeSet@1.1283.3.12, 2003-09-11 16:59:17-07:00, q@kampsax.dtu.dk [IPV4]: Fix wrong IP address in icmp.c error message. ChangeSet@1.1283.3.11, 2003-09-11 16:58:25-07:00, felipewd@terra.com.br [NET]: Kill unneded version.h in net/sched. ChangeSet@1.1283.3.10, 2003-09-11 16:52:13-07:00, shemminger@osdl.org [NET]: Convert packet scheduler API to seq_file. ChangeSet@1.1283.3.9, 2003-09-11 16:51:27-07:00, shemminger@osdl.org [NET]: Remove some unnecessary proc_fs.h includes ChangeSet@1.1283.3.8, 2003-09-11 16:50:51-07:00, hirofumi@mail.parknet.co.jp [NETFILTER]: Fix typoe in ip_nat_tftp.c ChangeSet@1.1283.3.7, 2003-09-11 16:48:40-07:00, chas@cmf.nrl.navy.mil [ATM]: Fix build failure with ATM_BR2684_IPFILTER enabled. ChangeSet@1.1283.3.6, 2003-09-11 16:47:46-07:00, chas@cmf.nrl.navy.mil [ATM]: Remove unnecessary GFP_ATOMIC allocation (from levon@movementarian.org) ChangeSet@1.1283.3.5, 2003-09-11 16:46:44-07:00, laforge@netfilter.org [NETFILTER]: Clear nf_debug in ipsec tunnel case. ChangeSet@1.1283.3.4, 2003-09-11 16:43:45-07:00, erlend-a@us.his.no [CRYPTO]: Add alg. type to /proc/crypto output. ChangeSet@1.1283.3.3, 2003-09-11 16:42:50-07:00, yoshfuji@linux-ipv6.org [NET]: Clean up /proc/net/{anycast6/igmp6}. ChangeSet@1.1283.3.2, 2003-09-11 16:41:49-07:00, yoshfuji@linux-ipv6.org [NET]: /proc/net/if_inet6 may drop some data. ChangeSet@1.1283.3.1, 2003-09-11 16:41:05-07:00, yoshfuji@linux-ipv6.org [NET]: Various /proc/net/* files may drop some data. ChangeSet@1.1283.2.1, 2003-09-12 00:33:27+01:00, davej@hardwired.(none) Merge hardwired.(none):/mnt/stuff/backups/src/kernel/2.6/trees/bk-linus into hardwired.(none):/mnt/stuff/backups/src/kernel/2.6/trees/agpgart ChangeSet@1.1283.1.4, 2003-09-11 15:46:20-07:00, greg@kroah.com PCI: fix up some pci drivers that had marked their probe functions with __init This also required some other functions and variables to be marked as __devinit ChangeSet@1.1283.1.3, 2003-09-11 14:36:33-07:00, greg@kroah.com [PATCH] PCI: remove compiler warning from previous new_id patch Also change the #define functions into inline functions to help catch any future paramater mis-matches. And clean up a few minor style issue... ChangeSet@1.1283.1.2, 2003-09-11 14:27:15-07:00, Matt_Domsch@Dell.com [PATCH] PCI: make new_id rely on CONFIG_HOTPLUG > > These either need to be marked __devinit and make "new_id" dependant on > > CONFIG_HOTPLUG Patch below moves all the new_id code under CONFIG_HOTPLUG. Tested with both CONFIG_HOTPLUG enabled and disabled. No significant code changes, merely code moving, and in 2 cases, stub functions added. ChangeSet@1.1312, 2003-09-11 15:33:42-04:00, romieu@fr.zoreil.com [PATCH] (1/4) sdla - move out of Space.c Apply on top of 2.6.0-test5-bk1 + Stephen sdla patches. Compiles fine. free_netdev() patrol. drivers/net/wan/sdla.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) ChangeSet@1.1311, 2003-09-11 15:33:35-04:00, shemminger@osdl.org [PATCH] (5/4) dlci netdevice event handling One more patch, found this in testing -- need to delete device from list when unregistered because of callback. ChangeSet@1.1310, 2003-09-11 15:33:28-04:00, shemminger@osdl.org [PATCH] (4/4) dlci netdevice event handling Since dlci device is a pseudo device built on top of sdla, change it to handle unregister events and delete itself. ChangeSet@1.1309, 2003-09-11 15:33:20-04:00, shemminger@osdl.org [PATCH] (3/4) dlci locking and registration changes Change the locking for the dlci device list and registration. - use RTNL instead of a private lock (needed for net notifier in next patch). - reorder the checks in the dlci_add to avoid complicated unwinds - use dev->destructor to free - hold RTNL around deassoc to protect callback from races ChangeSet@1.1308, 2003-09-11 15:33:13-04:00, shemminger@osdl.org [PATCH] (2/4) get rid of register_frad The sdla and dlci drivers have a callback interface which only stores a name in a table, but doesn't do anything useful. Looks like an interface which has lost it's usefulness and can be safely removed. Tested on 2.6.0-test5 by exercising the higher layer (dlci) without real hardware. ChangeSet@1.1307, 2003-09-11 15:33:06-04:00, shemminger@osdl.org [PATCH] (1/4) sdla - move out of Space.c Patch against 2.60-test5 to move sdla driver out of Space.c for initialization in non-module case. Since this driver doesn't come up until the device has been configured with an ioctl (set_config); there is no way it can have startup order problems. ChangeSet@1.1306, 2003-09-11 15:26:08-04:00, shemminger@osdl.org [PATCH] fix build of cosa The cosa driver definition of ioctl's either conflicts or was not picked up in the last round of _IOR redefinition (on 2.6.0-test5). The following makes it build, have no idea if it still works on real hardware. ChangeSet@1.1305, 2003-09-11 15:23:55-04:00, felipewd@terra.com.br [PATCH] slip.c: current state cleanup ChangeSet@1.1304, 2003-09-11 15:23:47-04:00, rddunlap@osdl.org [PATCH] tr/olympic probe: remove #warning, improve error handling This patch to 2.6.0-test5 removes the #warning in tokenring/olympic.c and improves error handling in the probe function. ChangeSet@1.1303, 2003-09-11 15:11:39-04:00, scott.feldman@intel.com [e1000] misc whitespace cleanup, changelog * misc whitespace cleanup, changelog ChangeSet@1.1302, 2003-09-11 15:11:32-04:00, scott.feldman@intel.com [e1000] Add PHY master/slave #define override * Add PHY master/slave #define override to address link issues with 82541/7 (rev2) against some low-end switches. Forcing master will improve the time-to-link against these switches. ChangeSet@1.1301, 2003-09-11 15:11:25-04:00, scott.feldman@intel.com [e1000] move static to table from .h to .c * Move static table from hw.h to hw.c to avoid creating a copy of table everytime hw.h is included.in .c. ChangeSet@1.1300, 2003-09-11 15:11:17-04:00, scott.feldman@intel.com [e1000] cleanup error return codes * clean up error return code propagation and eliminate redundant DEBUGOUT statements. ChangeSet@1.1299, 2003-09-11 15:11:10-04:00, scott.feldman@intel.com [e1000] make function our of setting media type * Consolidate code and make function out of setting media type. ChangeSet@1.1298, 2003-09-11 15:11:02-04:00, scott.feldman@intel.com [e1000] add ethtool flow control support * Add ethtool flow control support ChangeSet@1.1297, 2003-09-11 15:10:55-04:00, scott.feldman@intel.com [e1000] read correct bit from EEPROM for getting WoL settings * Bug fix: read the correct bit from the EEPROM that controls the initial setting for WoL after a reset. ChangeSet@1.1296, 2003-09-11 15:10:48-04:00, scott.feldman@intel.com [e1000] Turn off ASF support on Fiber nics * Turn off ASF support on fiber nics. Wasn't tested and isn't known to work, so disable before someone hurts themselves. ChangeSet@1.1295, 2003-09-11 15:10:40-04:00, scott.feldman@intel.com [e1000] 82544 PCI-X hang fix + TSO updates * Bug fix: 82544 hang with PCI-X: if outgoing Tx buffers terminate within evenly-aligned dwords, and the device is sharing the bus segment with another PCI-X device, 82544 can hang the bus on a split-completion transaction. Fix is to split buffer into two buffers with the first one not terminating within evenly-aligned dword address, and the second one being 4-bytes, which goes as a non-split-conpletion PCI-X transaction. * 8254x controllers that support TSO do an internal calculation to make sure there is enough FIFO space to handle the overhead of each TSO segment before DMA'ing TSO data from host memory. The internal calculation is dependent on the mss of the TSO (defines the number of segments), but the reserved space is a constant, so we need to adjust the maximum size of each buffer queued to the hardware to hold the equation and not overrun the FIFO. This is per TSO because the mss can change from one send to the next. ChangeSet@1.1294, 2003-09-11 15:10:33-04:00, scott.feldman@intel.com [e1000] new 82541/5/6/7 hardware support * Added 82545 (rev3), 82546 (rev3), and 82541/7 (rev2) support - new device IDs - internal SERDES support for 82545/6 (rev3) - don't apply MMRBC workaround for 82545/6 (rev3) - don't use IO mapping for reset for 82545/6 (rev3) ChangeSet@1.1293, 2003-09-11 14:53:27-04:00, amir.noam@intel.com [bonding 2.6] misc fixes: missing include, typos, comments ChangeSet@1.1292, 2003-09-11 14:53:20-04:00, amir.noam@intel.com [bonding 2.6] make each bond device use its own /proc entry ChangeSet@1.1291, 2003-09-11 14:53:12-04:00, amir.noam@intel.com [bonding 2.6] fix error handling in init code ChangeSet@1.1290, 2003-09-11 14:53:05-04:00, amir.noam@intel.com [bonding 2.6] embed stats struct inside bonding private struct ChangeSet@1.1289, 2003-09-11 14:52:58-04:00, amir.noam@intel.com [bonding 2.6] fix OOPS in bonding driver, when removing primary ChangeSet@1.1288, 2003-09-11 14:52:50-04:00, amir.noam@intel.com [bonding 2.6] fix change active command ChangeSet@1.1287, 2003-09-11 14:52:43-04:00, amir.noam@intel.com [bonding 2.6] fix kernel panic when optional feature used ChangeSet@1.1286, 2003-09-11 14:52:35-04:00, amir.noam@intel.com [bonding 2.6] fix ARP monitoring bug ChangeSet@1.1285, 2003-09-11 14:52:28-04:00, amir.noam@intel.com [bonding 2.6] fix load balance problem with high UDP Tx stress ChangeSet@1.1284, 2003-09-11 14:52:20-04:00, amir.noam@intel.com [bonding 2.6] fix 802.3ad long fail over with high UDP Tx stress ChangeSet@1.1283, 2003-09-11 07:06:46-07:00, piggin@cyberone.com.au [PATCH] Badness in as_completed_request warning Thish fixes Suparna's fsx and aio-stress and Dave Olien's concurrent mke2fs problems. It moves the hash adding into as_add_request. This fixes a small bug where a request could be added to the merge hash after being put on the dispatch list. It also moves responsibility for handling rbtree aliases (requests with the same start sector) out of as_add_arq_rb and into its caller. This cleans up a layering problem which was causing the state machine to go silly. Now instead of forcing the alias out onto the dispatch list, we chain the new request behind it, and they get sorted out at dispatch time. ChangeSet@1.1282, 2003-09-11 07:02:21-07:00, viro@parcelfarce.linux.theplanet.co.uk [PATCH] ps2esdi broken The PS/2 ESDI driver has some problems: a couple of typos on the modular side and misuse of module_init(): ChangeSet@1.1276.1.1, 2003-09-11 12:01:32+02:00, sam@mars.ravnborg.org kbuild: Separate output directory Separate output directory support enables the following (at least): o Building several configurations from the same SRC base, and in parrallel o Building from a RO media o More efficient build if files are retreived via NFS (files stored locally) Usage is simple: cd /path/to/kernel/src mkdir ~/build/kernel make O=~/build/kernel [Make options] Please note: The O= syntax must be used for ALL invocations of make. As an alternative you may set KBUILD_OUTPUT to the directory where to put the output files. The patch works for me, and I have tried with various configurations, including allnoconfig and defconfig. How it works: If the O= option is used, or KBUILD_OUTPUT is set then a second invocation of make happens in the output directory. The second invocation of make uses VPATH to tell make where to locate the files. Furthermore include options for gcc is modifyied to point both in the directory where the kernel src is located, and in the directory where the output files are located. The latter is used for generated .h files. When building the kernel the asm symlink is created. To support this a new 'include2' directory is created. Within include2/ asm is a symlink to the asm-$(ARCH) directory in the kernel src. Also when building the kernel the asm-offset.h file is created, and located in the include/asm-$(ARCH) directory, but included via . Therefore within include/ another asm symlink is created pointing to the asm-$(ARCH) directory located in the output directory. In Makefile.build the output directory is created if not already present. This was needed to support xfs, and oprofile. The patch is loosly based on ideas from Kai G. Roman Zippel introduced support for this in kconfig long time ago ChangeSet@1.1281, 2003-09-10 16:46:16-07:00, Andries.Brouwer@cwi.nl [PATCH] another keyboard problem solved A colleague reported that the keyboard of his brandnew laptop is dead under 2.6 while 2.4 works. Now I once wrote In order to avoid interference between scancode sequences or mouse packets and the reponses given to commands, the keyboard or mouse should always be disabled before giving a command that requires a response, and probably enabled afterwards. Some keyboards or mice do the disable automatically in this situation, but still require an explicit enable afterwards. (http://www.win.tue.nl/~aeb/linux/kbd/scancodes-9.html) This is what happens on this laptop. The routine atkbd_probe() probes for a keyboard, and after detecting it, enables it. But immediately afterwards the routine atkbd_set_3() reads the current scancode set and sets the desired set, and as a side effect of these commands, the keyboard gets disabled again. Thus, the keyboard enable must be moved after all command sending has been done. Now that I patch this area anyway: we are almost always in scancode set 2 but send the ATKBD_CMD_SETALL_MB command that only works in scancode set 3. At best this is useless. At worst it confuses the keyboard. So, I put this command in a separate routine and call that only when we really are in scancode set 3. ChangeSet@1.1239.2.4, 2003-09-11 00:08:56+01:00, rmk@flint.arm.linux.org.uk [ARM] Update SA1111 Combine the two initialisation functions, allow SA1111 to be built as a module, and remove a redundant SA1111 function prototype. ChangeSet@1.1278, 2003-09-10 12:00:14-07:00, armin@melware.de [PATCH] Eicon ISDN driver: remove old devfs_handle devfs_handle is not used any more. ChangeSet@1.1277, 2003-09-10 11:57:53-07:00, joe@perches.com [PATCH] Fix SEQ_START_TOKEN typo My fault. Fix for broken aarp.c which got an extra closing parenthesis. ChangeSet@1.1267.1.6, 2003-09-10 20:34:29+02:00, sam@mars.ravnborg.org kbuild/ppc*: Remove obsolete _config support ChangeSet@1.1267.1.5, 2003-09-10 20:26:00+02:00, sam@mars.ravnborg.org kbuild: Remove cscope.out during make mrproper From: "Nathan T. Lynch" The attached patch fixes the toplevel Makefile to remove cscope.out during make mrproper. The default name for the database that cscope creates is cscope.out, and this is what the cscope rule in the makefile uses. Currently, mrproper will leave cscope.out behind, which can make for interesting diffs... ChangeSet@1.1267.1.4, 2003-09-10 20:23:57+02:00, sam@mars.ravnborg.org kbuild: Build minimum in scripts/ when changing configuration From: Ricky Beam , me With the increasing amount of programs located in scripts/, several of which is dependent on the kernel configuration, it makes sense to avoid building these too often. With this patch only fixdep is build, the minimal requirement for running any *config target ChangeSet@1.1267.1.3, 2003-09-10 20:14:02+02:00, sam@mars.ravnborg.org kconfig: Allow architectures to select board specific configs This patch introduces the framework required for architectures to supply several independent configurations. Three architectures does this today: ppc, ppc64 and arm. The infrastructure provided here requires the files to be located in the following directory: arch/$(ARCH)/configs The file shall be named _defconfig To select the configuration for ppc/gemini simply issue the following command: make gemini_defconfig This will generate a valid configuration. ppc and ppc64 already comply to the above requirements, arm needs some trivial updates. ChangeSet@1.1239.2.3, 2003-09-10 19:12:22+01:00, zecke@flint.arm.linux.org.uk [ARM PATCH] 1656/1: Simpad board update to make it work Patch from Holger Freyther Make it work ;) ChangeSet@1.1239.2.2, 2003-09-10 19:07:07+01:00, zecke@org.rmk.(none) [ARM PATCH] 1654/1: Simpad PCMCIA resubmit Patch from Holger Freyther This fixes initialization of PCMCIA for the SIMpad unsigned long now user for the flag ChangeSet@1.1267.1.2, 2003-09-10 20:05:15+02:00, sam@mars.ravnborg.org bk: Ignore scripts/bin2c bin2c is used by ikconfig ChangeSet@1.1239.2.1, 2003-09-10 19:04:03+01:00, zecke@org.rmk.(none) [ARM PATCH] 1653/1: Simpad Flash Partition resubmit Patch from Holger Freyther This the the resubmit of the flash partition changes for SIMpad. Two versions one for cramfs one for all jffs2 and also the SIM has two banks instead of one even if they're next to each other... ChangeSet@1.1267.1.1, 2003-09-10 20:04:00+02:00, sam@mars.ravnborg.org kbuild: Save relevant parts of modules.txt The out-dated modules.txt were deleted from the kernel, save the kbuild related bits in Documentation/kbuild. It needs more updates, but for now this is better than nothing ChangeSet@1.1276, 2003-09-10 09:44:42-07:00, willy@debian.org [PATCH] interrupt.h needs kernel.h uses barrier() but does not include . ChangeSet@1.1275, 2003-09-10 09:44:34-07:00, willy@debian.org [PATCH] fs/exec.c whitespace cleanups Whitespace cleanup (mostly deleting trailing whitespace). ChangeSet@1.1274, 2003-09-10 09:44:26-07:00, willy@debian.org [PATCH] 1GB stack size limit on PA-RISC This patch introduces a 1GB stack size limit for stack-grows-up (ie PA-RISC), as discussed previously. ChangeSet@1.1273, 2003-09-10 09:40:05-07:00, anton@samba.org [PATCH] quieten initramfs and fix /dev permissions Dont print the contents of the initramfs, for any decent sized cpio it will overflow the kernel ring buffer. Also relax permissions on /dev (755 not 700). ChangeSet@1.1272, 2003-09-10 09:39:55-07:00, anton@samba.org [PATCH] Fix initramfs permissions on directories and special files Set correct permissions on initramfs directories and special files. We dont want to obey the umask here, so do the same thing we do on normal files - call sys_chmod. ChangeSet@1.1271, 2003-09-10 09:39:47-07:00, anton@samba.org [PATCH] fix oops in hvc_console tty_register_driver already calls tty_register_device so there is no need to do it in hvc_console. Besides, it oopses when we do that. ChangeSet@1.1270, 2003-09-10 09:39:38-07:00, rusty@rustcorp.com.au [PATCH] Remove modules.txt Thanks to Stephen Hemminger for pointing out how obsolete modules.txt is. modules.txt contains mainly ancient information which is replicated in the kconfig help message, README, makefile.txt or the modprobe manual page. The only part which is not covered elsewhere is the "building external modules" which is still being debated (and belongs under the kbuild docs). kmod.txt reference removed from index, too. ChangeSet@1.1269, 2003-09-10 09:29:39-07:00, armin@melware.de [PATCH] Eicon ISDN driver: removed __devinitdata from pci_device_id. pci_device_id can not be marked __devinitdata, was re-added with last update by accident. ChangeSet@1.1268, 2003-09-10 09:28:40-07:00, willy@debian.org [PATCH] Fill in ELF OSABI in ELF headers This fills in the ELF EI_OSABI field. This doesn't matter for most architectures, but PA-RISC uses the Linux flavour of the ABI (since HPUX uses the None flavour). Patch by Randolph Chung. ChangeSet@1.1239.1.1, 2003-09-10 08:59:46+01:00, rmk@flint.arm.linux.org.uk Merge flint.arm.linux.org.uk:/usr/src/bk/linux-2.6 into flint.arm.linux.org.uk:/usr/src/bk/linux-2.6-pcmcia ChangeSet@1.1267, 2003-09-10 00:41:11-07:00, axboe@suse.de [PATCH] blk API update (and bug fix) to CDU535 cdrom driver This is a lot better than what is there know. From: Felipe W Damasio - cli-sti removal - blk API update - set_current_state - Remove 'panic' line. .. and we can now remove the BROKEN_ON_SMP Kconfig annotation. ChangeSet@1.1266, 2003-09-10 00:41:02-07:00, axboe@suse.de [PATCH] get rid of warning in gscd From: Stephen Hemminger Compiler warning due to missing equal sign. ChangeSet@1.1265, 2003-09-10 00:21:46-07:00, akpm@osdl.org [PATCH] CPU scheduler CAN_MIGRATE fix From: Andrew Theurer This change: http://linux.bkbits.net:8080/linux-2.5/diffs/kernel/sched.c@1.202 does not seem to make sense: #define CAN_MIGRATE_TASK(p,rq,this_cpu) \ ((!idle || (jiffies - (p)->last_run > cache_decay_ticks)) && \ !task_running(rq, p) && \ cpu_isset(this_cpu, (p)->cpus_allowed)) It should be just the opposite; an idle cpu should be able to have a more aggressive steal, and a busy cpu should not. ChangeSet@1.1264, 2003-09-10 00:21:38-07:00, akpm@osdl.org [PATCH] sys_fadvise needs asmlinkage ChangeSet@1.1263, 2003-09-10 00:21:30-07:00, akpm@osdl.org [PATCH] Reduce random driver lock contention From: Matt Mackall The new locking in the random driver is consuming 60% of CPU resources in Anton's monster power5 boxes. Basically, when the primary pool is 7/8th full, we shut off the firehose and go into a trickle mode to keep the pool fresh. Saves CPU for everyone and should make the contention drop off the charts too (though the trickle factor might need adjusting again for Origin-class machines). ChangeSet@1.1262, 2003-09-10 00:21:22-07:00, akpm@osdl.org [PATCH] fix Summit srat.h includes From: Dave Hansen I was compiling for my plain 'ol PC, and was getting unresolved symbols for get_memcfg_from_srat() and get_zholes_size(). The CONFIG_NUMA definition right now allows it to be turned on for plain old X86_PC. Does anyone know why this is? depends on SMP && HIGHMEM64G && (X86_PC || X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI && !ACPI_HT_ONLY)) In any case, the summit code incorrectly assumes in at least 2 places that NUMA && !NUMAQ means summit. Someone was evidently trying to cover the generic subarch case, but that's already taken care of by the lovely config system and CONFIG_ACPI_SRAT. This patch fixes those assumptions and adds a nice little warning for people that try to #include srat.h without having srat support turned on. ChangeSet@1.1261, 2003-09-10 00:21:14-07:00, akpm@osdl.org [PATCH] mwave locking fixes From: Manfred Spraul The mwave driver uses a user space daemon for some modem operations. The user space daemon calls ioctl(,IOCTL_MW_GET_IPC), and the driver returns after an interrupt arrived. The actual wait used interruptible_sleep_on(), which can lead to lost wakeups. A local spinlock on the stack is used to close that race, but this is broken on SMP, perhaps even with preempt. The attached patch fixes that by switching to the normal add_wait_queue/test_if_race_occured/schedule/remove_wait_queue sequence. ChangeSet@1.1260, 2003-09-10 00:21:06-07:00, akpm@osdl.org [PATCH] ext3: remove debug code ext3 has fancy test harness code which allows you to simulate crashes (for testing recovery). It will make the underlying disk start ignoring writes a specified number of seconds after the mount. It's inoperative without an additional offline patch anyway, and it's doing hacky things which scared Al. So kill it; I'll maintain it in the separate ext3 debug patch. ChangeSet@1.1259, 2003-09-10 00:20:58-07:00, akpm@osdl.org [PATCH] tidy up lib/inflate.c error messages From: Andre McCurdy There is some inconsistency within lib/inflate.c and its users about whether the error message text or the error() function should provide the '\n'. This patch tries to make everyone consistent - by removing the newline from all message texts, and adding one to the only error() function which did not provide it (in init/do_mounts_rd.c). ChangeSet@1.1258, 2003-09-10 00:20:49-07:00, akpm@osdl.org [PATCH] really use english date in version string From: Andrey Borzenkov LANG is not always enough to force date to english. ChangeSet@1.1257, 2003-09-10 00:20:41-07:00, akpm@osdl.org [PATCH] install_page pte use-after-unmap fix From: Rajesh Venkatasubramanian Don't deref the pte pointer after having kunmapped the memory it points at. ChangeSet@1.1256, 2003-09-10 00:20:33-07:00, akpm@osdl.org [PATCH] remap file pages MAP_NONBLOCK fix From: Rajesh Venkatasubramanian The remap_file_pages system call with MAP_NONBLOCK flag does not install file-ptes when the required pages are not found in the page cache. Modify the populate functions to install file-ptes if the mapping is non-linear and the required pages are not found in the page cache. Patch is for test4-mm6. Compiles and boots. Patch tested using the programs at: http://www-personal.engin.umich.edu/~vrajesh/linux/remap-file-pages/ ChangeSet@1.1255, 2003-09-10 00:20:25-07:00, akpm@osdl.org [PATCH] ia32 idle using PNI monitor/mwait From: "Nakajima, Jun" Attached is a patch that enables PNI (Prescott New Instructions) monitor/mwait in the kernel idle handler. ChangeSet@1.1254, 2003-09-10 00:20:16-07:00, akpm@osdl.org [PATCH] d_delete-d_lookup race fix From: Maneesh Soni d_delete() calls dentry_iput() after releasing the per dentry lock. This can race with __d_lookup and lead to situation where we can make dentry negative with ref count > 1. The following patch makes dentry_iput() to hold per dentry lock till d_inode is NULL and dentry has been removed from d_alias list. ChangeSet@1.1253, 2003-09-10 00:20:08-07:00, akpm@osdl.org [PATCH] ppp devfs oops fix From: Christoph Hellwig PPP leaves the chardev registered even if we're going to fail the modprobe. ChangeSet@1.1252, 2003-09-10 00:20:00-07:00, akpm@osdl.org [PATCH] Handle NR_CPUS overflow From: john stultz Don't try to support more than NR_CPUS cpus: things overflow. Also, increase the default in config for some architectures. (Dave Hansen). ChangeSet@1.1251, 2003-09-10 00:19:52-07:00, akpm@osdl.org [PATCH] remove duplicate includes in kernel/ From: "Randy.Dunlap" remove duplicate #includes in kernel/ ChangeSet@1.1250, 2003-09-10 00:19:45-07:00, akpm@osdl.org [PATCH] sound: remove duplicate includes From: "Randy.Dunlap" remove duplicate #includes in sound/ ChangeSet@1.1249, 2003-09-10 00:19:37-07:00, akpm@osdl.org [PATCH] make selinux enable param config option, enabled by From: James Morris This patch against current bk makes the recently added SELinux boot parameter feature a configurable option, and enables SELinux by default when selected. These changes were made following feedback including discussion on the SELinux list. The rationale for the changes is to allow SELinux to be be configured and enabled unconditionally. If the boot parameter option is selected, then SELinux is now enabled unless selinux=0 is specified at the kernel command line. ChangeSet@1.1248, 2003-09-10 00:19:28-07:00, akpm@osdl.org [PATCH] Fix imm.c again From: Adrian Bunk Earlier patch wasn't correct especially in the !CONFIG_SCSI_IZIP_EPP16 case, reading all uses of this array (IMM_MODE_STRING is used to print the corresponding string in printks). If I'm not misunderstanding it, CONFIG_SCSI_IZIP_EPP16 means "use 16bit even when 32bit is requested". It seems the right solution is static char *IMM_MODE_STRING[] = { [IMM_AUTODETECT] = "Autodetect", [IMM_NIBBLE] = "SPP", [IMM_PS2] = "PS/2", [IMM_EPP_8] = "EPP 8 bit", [IMM_EPP_16] = "EPP 16 bit", #ifdef CONFIG_SCSI_IZIP_EPP16 [IMM_EPP_32] = "EPP 16 bit", #else [IMM_EPP_32] = "EPP 32 bit", #endif [IMM_UNKNOWN] = "Unknown", }; ChangeSet@1.1247, 2003-09-10 00:19:20-07:00, akpm@osdl.org [PATCH] reiserfs direct-IO support From: Oleg Drokin This patch implements DirectIO support for reiserfs v3. This is mostly a port from 2.4. Thanks to Mingming Cao from IBM for some clues in porting. ChangeSet@1.1246, 2003-09-10 00:19:11-07:00, akpm@osdl.org [PATCH] Move ikconfig to /proc/config.gz From: "Randy.Dunlap" The SuSE kernels place their ikconfig info at /proc/config.gz: in a different place, and compressed. We thought it was a good idea to do it that way in 2.6 as well. - gzip the /proc config file, put it in /proc/config.gz; - Based on a SuSE patch by Oliver Xymoron , which was derived from a patch by Nicholas Leon - change /proc/ikconfig/built_with to /proc/config_build_info; - cleanup ikconfig init/exit entry points (static, __init, __exit); - Makefile help from Sam Ravnborg; DESC ikconfig cleanup EDESC From: Stephen Hemminger Simplify and cleanup the code: - use single interface to seq_file where possible - don't need to do as much of the /proc interface, only read - use copy_to_user to avoid char at a time copy - remove unneccesary globals - use const char[] rather than const char * where possible. Didn't change the version since interface doesn't change. ChangeSet@1.1245, 2003-09-10 00:19:03-07:00, akpm@osdl.org [PATCH] compiler warning fixes for DAC960 on alpha From: Dave Olien This patch is forwarded from Jay Estabrook at HP. I've compiled the patch on ia32 and ia64 machines and it's good. I also recreated the patch so it would apply to mm5 without fuzzy offsets. Here's Jay's summary of the patch: Here's a very small set of patches against 2.6.0-test4 that help the DAC960 driver compile cleaner (gets rid of warnings on Alpha) and help it to work on some old OEM'ed DAC960 cards that were sold in our older Alphas. The warnings are all concerned with "conversions to different size without cast", as pointers and longs are same size (8-bytes) but ints are 4-bytes, on Alpha. I don't believe the change to (long) from (int) will affect any 32-bit architectures, but those using LP64 like Alpha, ie SPARC64 and prolly IA64, will have the warnings go away. The change to make the oldest acceptable firmware version 2.70 instead of 2.73 is made spcific to Alpha, since it is only those cards that DEC OEM'ed from Mylex that would have such (as explained a bit better in the patch itself). ChangeSet@1.1244, 2003-09-10 00:18:56-07:00, akpm@osdl.org [PATCH] dac960 devfs_name initialisation fix From: Andrey Borzenkov DAC960.c does it incorrectly (at least in 2.6.0-test4). It will create _directory_ /dev/rd/cNdM making it impossible to create compat block device entry with the same name. The right thing it to create separate directory for each controller/target as in attached trivial patch (untested due to lack of hardware). You will need devfsd support for this but then you will need it for cciss or cpqarray as well and possibly for others. Which returns us to the problem of devfsd maintenance ... ChangeSet@1.1243, 2003-09-10 00:18:46-07:00, akpm@osdl.org [PATCH] monolitic_clock, timer_{tsc,hpet} and CPUFREQ From: Dmitry Torokhov I noticed that although timer_tsc registers cpufreq notifier to detect frequency changes and adjust cpu_khz it does not set cyc2ns_scale. ChangeSet@1.1242, 2003-09-10 00:18:38-07:00, akpm@osdl.org [PATCH] Initialise devfs_name in various block drivers From: Andrey Borzenkov Various block drivers are currently devfs-unaware. Andrey's patch attempts to give them reasonable representations in devfs. "The attached patch suggests some possible names for non-floppy devices based on reading driver source. I have to ask if these make sense. At least for cciss Mandrake devfsd patch expects different names but it seems to be mistake (it assumes single controller always) "For floppy it is not as simple. Floppy cannot use genhd and must create names manually; but I do not know what names are appropriate or expected. "For acsi the target/lun name may have problem of creating compat names (if any) by devfsd. "Please note that none of them created any devfs name under 2.4 as well. So it is not a regression ..." ChangeSet@1.1241, 2003-09-10 00:18:30-07:00, akpm@osdl.org [PATCH] calibrate_tsc() fix and consolidation From: "Pallipadi, Venkatesh" CONFIG_TIMER_CYCLONE doesn't build at present because calibrate_tsc() was made static. The patch fixes that up and moves all calibrate_tsc functions into a common file, avoiding the current code duplication. ChangeSet@1.1240, 2003-09-10 00:18:20-07:00, akpm@osdl.org [PATCH] s/spin_lock_irqrestore/spin_unlock_irqrestore From: Vinay K Nallamothu Fix a couple of cut-n-paste errors. (Why on earth is a scsi driver poking at the RTC hardware?) ChangeSet@1.1239, 2003-09-09 22:09:55-07:00, torvalds@home.osdl.org Fix ray_cs for new interrupt handling. Damn 16-bit PCMCIA layer has no type checking. Complete crap. ChangeSet@1.1238, 2003-09-09 20:22:22-07:00, torvalds@home.osdl.org From Stephen Hemminger: we were trying to cast an "unsigned short" to a pointer. That was a typo. Ack'ed by Al Viro. ChangeSet@1.1217.3.27, 2003-09-09 17:01:56-07:00, jbarnes@sgi.com [PATCH] ia64: update Kconfig comment for NR_CPUS ChangeSet@1.1237, 2003-09-09 16:49:25-07:00, eyal@eyal.emu.id.au [PATCH] wl3501 with old compiler Fix the ## handling to work with old gcc versions (spaces around the ',' to make token boundaries work). ChangeSet@1.1236, 2003-09-09 16:28:36-07:00, torvalds@home.osdl.org Make rxrpc use SEQ_START_TOKEN. ChangeSet@1.1235, 2003-09-09 16:24:51-07:00, joe@perches.com [PATCH] Use SEQ_START_TOKEN in include/net/* [3/3] ChangeSet@1.1234, 2003-09-09 16:23:49-07:00, joe@perches.com [PATCH] Use SEQ_START_TOKEN in include/net/* [2/3] ChangeSet@1.1233, 2003-09-09 16:23:41-07:00, joe@perches.com [PATCH] Use SEQ_START_TOKEN in drivers/net/* [1/3] ChangeSet@1.1232, 2003-09-09 15:50:14-07:00, shemminger@osdl.org [PATCH] Fix modularization of Siemens line discipline Convert SIEMENS R3964 tty line discipline on 2.6.0-test5 to use tty_ldisc owner instead of explicit MOD_INC/DEC. And fix the initializer to be a much more readable C99 one. ChangeSet@1.1231, 2003-09-09 14:42:24-07:00, shemminger@osdl.org [PATCH] Get rid of Intermezzo warning There is a leftover MOD_DEC_USE_COUNT intermezzo, with no matching _INC_ anywhere. Since it sets owner on the file system operations there should be no need for explicit module manipulation. ChangeSet@1.1230, 2003-09-09 14:38:31-07:00, torvalds@home.osdl.org Merge bk://linux-dj.bkbits.net/cpufreq into home.osdl.org:/home/torvalds/v2.5/linux ChangeSet@1.1228, 2003-09-09 14:32:54-07:00, guillaume@morinfr.org [PATCH] fix cpu_test_and_set() on UP cpumask_up.h is broken. It tries to access the "mask" member although that cpumask_t is an ulong on UP. This breaks archs which uses cpumask functions even on UP such as s390. ChangeSet@1.1217.1.5, 2003-09-10 06:55:52+10:00, anton@samba.org ppc64: Give us a generic local.h until we have atomic64 ChangeSet@1.1227, 2003-09-09 13:45:50-07:00, torvalds@osdl.org [PATCH] Fix CONFIG_PCMCIA_WL3501 with older compilers We only support named initializers with one leval of naming, ie that .foo.bar = baz, thing should go. gcc-2.95 doesn't handle it (neither does sparse, I think). Replace such initializers with .foo = { .bar = baz, }, instead. ChangeSet@1.1153.108.27, 2003-09-09 21:44:43+01:00, davej@redhat.com [CPUFREQ] add cpufreq_update_policy() Add a new cpufreq_update_policy call: Certain cpufreq policy notifers have different needs at different times. Thus it needs to be possible to re-evaluate an already set cpufreq policy. Note that the cpufreq policy should only be set by one person: the user. Not any other in-kernel code [with one exception, of course: during booting]. ChangeSet@1.1153.108.26, 2003-09-09 21:42:00+01:00, davej@redhat.com [CPUFREQ] remove $Id$ tags, update filenames ChangeSet@1.1226, 2003-09-09 13:38:49-07:00, willy@debian.org [PATCH] PA-RISC update for 2.6.0-test5 PA-RISC updates for 2.6.0-test5. Contributions from Paul Bame, James Bottomley, Randolph Chung, Helge Deller, Grant Grundler, LaMont Jones, Matthew Wilcox ChangeSet@1.1225, 2003-09-09 13:38:20-07:00, bunk@fs.tum.de [PATCH] ATM Ambassador no longer BROKEN_ON_SMP Chas Williams fixed the compilation on SMP, so we can remove the Kconfig annotation now and let people select it in the build again. ChangeSet@1.1153.108.25, 2003-09-09 21:35:48+01:00, davej@redhat.com [CPUFREQ] Merge speedstep-smi driver. From: Hiroshi Miura Intel SpeedStep driver using a BIOS SMI call. Quoting his original announcement: "This driver is based on the information from 1. Microsoft Windows XP Document. we can get the SMI interface values from ax=E980/int15 BIOS call. 2. Intel SpeedStep Applet Document.(from HP.com) http://h18007.www1.hp.com/support/files/evonotebook/us/download/10631.html " Adds code to request transition ownership when processing the system critical resume message. When a critical hibernate occurs, the Applet does not receive any system level notification. The change forces the Applet to re-acquire transition ownership upon resume from a critical hibernate. " This is informative. This saied that something 'ownership' call is needed on SMI interface first. 3. Grover, Andrew's int 15h patch posted to cpufreq ml Message-ID: code which call BIOS to get SMI values. I included it. 4. Malik Martin's rev engineering results. call is made with BX, CX, EDI register values. and need signature 'ISG' when call. find function values. bx=1(get) and bx=2(set) 5. Marc Lehmann's 'speedstep' utility, sample of assembler code to call SMI. 6. My work. find function to return max/min freq which system supportd. (bx=4) more values are gotten, but I cannot understand... find 'ownership' function value(bx=0, which is other than 1 2 4..). ToDo(in pregress) support governor "auto" and using smi_event call, imprement auto freqchange feature. test on 440BX/ZX platform. Memo module parameters are override result of an int 15h/eax=E890h call. these parameter value are gotten from Windows XP registory." Also includes some bugfixes, updates and workarounds from me. NB: A lot of BIOS out there are buggy. You might want to try this driver also with Intel's default values -- smi_cmd = 0x82 and smi_port = 0xb2 ChangeSet@1.1217.1.4, 2003-09-10 06:23:25+10:00, anton@samba.org ppc64: catch bad ioctl size at compile time, from x86 ChangeSet@1.1217.10.20, 2003-09-09 13:14:44-07:00, rmk@arm.linux.org.uk [PATCH] More buggy pci drivers This should fix all the remaining pci drivers which mark the pci device ID tables as being discardable at run time. ChangeSet@1.1217.10.19, 2003-09-09 13:14:34-07:00, rmk@arm.linux.org.uk [PATCH] stable AGP pci_device_id tables This should fix all the AGP drivers. pci_device_id tables can not and must not be marked discardable. They are used for as long as the driver is registered. ChangeSet@1.1217.10.18, 2003-09-09 13:02:16-07:00, armin@melware.de [PATCH] eicon ISDN driver: update Use different var-names if they are non-static, configure 4BRI like BRI cards, fixed new /proc entries, inline declarations for common helper functions. ChangeSet@1.1217.10.17, 2003-09-09 13:02:08-07:00, armin@melware.de [PATCH] eicon ISDN driver: C comments changed // comments to /* */ ChangeSet@1.1217.10.16, 2003-09-09 13:02:00-07:00, armin@melware.de [PATCH] eicon ISDN driver: Kernelconfig Main divas modules now may be build in-kernel. 4BRI cards are configured together with BRI cards. ChangeSet@1.1217.10.15, 2003-09-09 13:01:52-07:00, armin@melware.de [PATCH] eicon ISDN driver: endianess fixed endianess errors in common code part. ChangeSet@1.1217.10.14, 2003-09-09 13:01:45-07:00, armin@melware.de [PATCH] eicon ISDN driver: list handling Fixed internel list handling for modules built-in kernel. ChangeSet@1.1217.10.13, 2003-09-09 13:01:36-07:00, armin@melware.de [PATCH] eicon ISDN driver: debug Module now can be build without debug code, necessary if the module is built-in the kernel. Fixed spelling typos. ChangeSet@1.1217.10.12, 2003-09-09 13:01:28-07:00, armin@melware.de [PATCH] eicon ISDN driver: capi code fix Fix application memory allocation, module locking, building in-kernel, use new internal debug api. ChangeSet@1.1217.10.11, 2003-09-09 13:01:19-07:00, armin@melware.de [PATCH] eicon ISDN driver: memory attach Access to cards memory now uses macros to attach to the correct memory area of the card. ChangeSet@1.1217.1.3, 2003-09-10 05:52:19+10:00, anton@samba.org Merge samba.org:/scratch/anton/linux-2.5 into samba.org:/scratch/anton/tmp3 ChangeSet@1.1217.11.2, 2003-09-09 21:11:38+02:00, benh@kernel.crashing.org dmasound update from Christoph Hellwig ChangeSet@1.1217.10.10, 2003-09-09 12:09:41-07:00, benh@kernel.crashing.org [PATCH] IDE: Fix Power Management request race on resume The current IDE Power Management code I wrote has a race on wakeup when the master device got resumed, it may take a request. At this point, a PM resume request to a slave device of the same hwgroup would clear hwgroup->rq and cause an Oops when the master device request completes. This patch fixes it. Due to the context in which PM resume requests are sent, just not clearing hwgroup->rq for these is enough. I also removed a useless debug message in the PM code that was actually misleading (people though it indicated a problem while it didn't, it's really useless) and fix a typo in a comment. ChangeSet@1.1217.10.9, 2003-09-09 12:09:32-07:00, benh@kernel.crashing.org [PATCH] IDE: Fix request handling with ide-default & ATAPI This fixes a bug that happens when a request gets to the IDE layer for a drive using ide-default (that is with no subdriver attached), like a Power Management request. In this case, the core will wait for the device status to match drive->read_stat, but that field contains by default a value that is not suitable for ATAPI devices. This patch fixes it. ChangeSet@1.1217.3.26, 2003-09-09 11:55:09-07:00, jbarnes@sgi.com [PATCH] ia64: cpumask_t fixes This patch coverts a few spots to use cpumask_t instead of unsigned long. ChangeSet@1.1217.10.7, 2003-09-09 10:42:26-07:00, dhowells@redhat.com [PATCH] AFS update ChangeSet@1.1217.10.6, 2003-09-09 10:16:16-07:00, dhowells@redhat.com [PATCH] RxRPC update Here's a patch to update the RxRPC driver. Most of it is CodingStyle fixes, but it also includes a few miscellaneous bug fixes. stdint types are also turned into C99 forms (eg: u32 -> uint32_t). ChangeSet@1.1217.10.5, 2003-09-09 10:16:07-07:00, eike-kernel@sf-tec.de [PATCH] Fix typo in fs/Kconfig ChangeSet@1.1217.10.4, 2003-09-09 10:15:58-07:00, axboe@suse.de [PATCH] Fix blk_stop_queue bug Benh saw some bugs where the queue would end up being in an invalid state, and this could certainly explain one of them. We must not have a stopped queue on the plug list, and blk_plug_device() right now will happily plug a stopped queue. We don't need to have it plugged either, blk_start_queue() will make sure that request_fn gets run. ChangeSet@1.1217.10.3, 2003-09-09 10:04:57-07:00, joe@perches.com [PATCH] Add SEQ_START_TOKEN #define to seq_file.h Code that includes seq_file.h uses a magic pointer "(void*)1" to start a header seq_printf. This patch adds a #define, so that people can start writing more readable code. ChangeSet@1.1217.10.2, 2003-09-09 09:46:25-07:00, jgarzik@pobox.com [PATCH] Fix netdev close This should fix the "ifconfig down ... ifconfig up" problems some people have seen. ChangeSet@1.1217.9.12, 2003-09-09 08:57:48-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix for proc/generic ChangeSet@1.1217.9.11, 2003-09-09 08:56:12-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix for kmsg ChangeSet@1.1217.9.10, 2003-09-09 08:55:27-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix for fat/file.c ChangeSet@1.1217.9.9, 2003-09-09 08:54:47-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix for proc/misc ChangeSet@1.1217.9.8, 2003-09-09 08:54:09-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix reboot ChangeSet@1.1217.9.7, 2003-09-09 08:53:31-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix ext2_readlink ChangeSet@1.1217.9.6, 2003-09-09 08:52:52-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix kcore ChangeSet@1.1217.9.5, 2003-09-09 08:52:29-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix xattr ChangeSet@1.1217.9.4, 2003-09-09 08:50:38-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix cpufreq ChangeSet@1.1217.9.3, 2003-09-09 08:50:18-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix eventpoll ChangeSet@1.1217.9.2, 2003-09-09 08:50:02-07:00, Andries.Brouwer@cwi.nl [PATCH] sparse fix sysctl ChangeSet@1.1217.9.1, 2003-09-09 08:49:53-07:00, Andries.Brouwer@cwi.nl [PATCH] compilation fix ufs Don't use C++ "argument declarations anywhere" in the kernel, even if newer versions of gcc accept it. ChangeSet@1.1217.8.5, 2003-09-09 15:23:36+01:00, rmk@flint.arm.linux.org.uk [SERIAL] Introduce per-port capabilities. This allows us to maintain quirks or capabilities on a per-port basis, so we can handle buggy clones more effectively. ChangeSet@1.1217.8.4, 2003-09-09 13:33:12+01:00, rmk@flint.arm.linux.org.uk [SERIAL] Fix another missing irqreturn_t (clps711x.c) ChangeSet@1.1217.8.3, 2003-09-09 13:26:47+01:00, rmk@flint.arm.linux.org.uk [SERIAL] Convert serial config deps to select statements The dependencies for CONFIG_SERIAL_CORE / CONFIG_SERIAL_CORE_CONSOLE were becoming very messy. This cset converts the dependencies to use "select" statements instead. ChangeSet@1.1217.8.2, 2003-09-09 13:15:57+01:00, rmk@flint.arm.linux.org.uk [SERIAL] Drop "level" argument from serial PM calls. Since the driver model has transitioned away from using multi-level device suspend/resume, we also drop the multi-level support from the serial layer. Update the 8250 and sa1100 drivers for this change. ChangeSet@1.1217.8.1, 2003-09-09 11:07:00+01:00, rmk@flint.arm.linux.org.uk Merge ChangeSet@1.1153.90.7, 2003-09-09 09:00:09+01:00, davej@redhat.com [AGPGART] Remove unreferenced extern ChangeSet@1.1217.3.25, 2003-09-08 22:18:33-07:00, peterc@gelato.unsw.edu.au [PATCH] ia64: unwind.c fix for spinlock-debug compilation If you try to compile 2.6.0-test[45] with spinlock debugging on, then unwind.c won't compile, because it uses a #define magic that hides the variable in the spinlock debugging code (also called magic). ChangeSet@1.1217.3.24, 2003-09-08 17:10:45-07:00, arun.sharma@intel.com [PATCH] ia64: MINSIGSTKSZ on ia32 MINSIGSTKSZ is defined differently for i386 and ia64. This patch improves compatibility with apps which use sigaltstack(2) with sizes between MINSIGSTKSZ_IA32 and MINSIGSTKSZ. ChangeSet@1.1217.3.23, 2003-09-08 16:29:54-07:00, suresh.b.siddha@intel.com [PATCH] ia64: fix typo in spinlock.h ChangeSet@1.1217.5.1, 2003-09-08 23:16:56+01:00, rmk@flint.arm.linux.org.uk Merge flint.arm.linux.org.uk:/usr/src/bk/linux-2.6 into flint.arm.linux.org.uk:/usr/src/bk/linux-2.6-pcmcia ChangeSet@1.1217.3.22, 2003-09-08 13:51:34-07:00, davidm@tiger.hpl.hp.com Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5 into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5 ChangeSet@1.1153.79.28, 2003-09-08 13:13:42-07:00, jbarnes@sgi.com [PATCH] ia64: fix current usage in sn2 code For some reason, we had a structure field called 'current'. This patch fixes that. ChangeSet@1.1153.79.27, 2003-09-08 13:12:55-07:00, jbarnes@sgi.com [PATCH] ia64: misc. sn2 updates Fix a couple of sn2 files. ChangeSet@1.1153.90.6, 2003-09-08 21:01:36+01:00, davej@redhat.com [AGPGART] Fix ATI GART for IGP9100/R300 From the folks at ATI. Some chips hang with this flush. ChangeSet@1.1217.3.21, 2003-09-08 12:45:46-07:00, torvalds@home.osdl.org Linux 2.6.0-test5 TAG: v2.6.0-test5